Reconnect Cisco Wireless Router With 2wire Modem After Password Change?

Feb 8, 2011

I have a 2wire Modem connected to a Cisco Wireless N Router, that is connected to another Cisco Wireless N Router. All was working well. In my absence sbc (AT&T) changed the pass word of the 2wire Modem. The 2wire has stoped communication with the Cisco Wireless N Routers. I connected am Ethernet wire to one of the ports of the 2wire, and connected it to the 2nd Cisco Wireless N Router. The signal gets to the 2nd Cisco Router. However, when I attempt to access the Internet on the CPU connected to the 2 Cisco Router, I get an error Message saying that there is a problem with the Modem and/or Router. On the available Networks selection screen I can see the connections that I want. The selection info shows connected. But when I try to connect, the I can't.

View 3 Replies

Linksys Wireless Router :: Wrt160nvv3 / Change Password Of Wifi Modem

Mar 1, 2013

change password of my wifi modem.model cisco linksys: WRT160nVv3.

View 6 Replies View Related

Wag200g - Change Password In A Linksys Modem / Router?

Aug 4, 2011

I have a Linksys wag200g Modem/router and I need to change my Emails registered password.

View 4 Replies View Related

Change The Password On A DLink Wireless Modem Dwl2100ap?

Jun 22, 2012

change the password on a d-link wireless modem dwl2100ap

View 1 Replies View Related

2wire 2701HG-B Wireless Router / Dsl Modem Combo / Can't Renew IP Address

May 13, 2011

I'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.

Here is the ipconfig /all print:

Windows IP Configuration

Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]....

When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.

View 5 Replies View Related

Use 2wire DSL Router / Modem With Cable Internet?

Nov 27, 2011

I have cable internet can I use 2wire DSL router/modem with cable internet? I need to do wireless in my house?

View 1 Replies View Related

Get The Router To Use Existing 2Wire 2701HG Modem?

Mar 1, 2013

I purchaseda trendnet 692 GR router because I understood that I would be able to stream from let's say my computer to my TV that is up the stairs. Here is the problem. I did get the router to use my existing 2Wire 2701HG modem.Yes I can connect my Samsung 6100 to the wireless 2Wire but I thought the trendnet setup would work the best.I and Trendnet support set up my router and media bridge and the two do work but my tv won't work through the MB. I have connected to the network but the next part of the connection (the internet) won't connect. I have tried different IP settings that I thought would connect but nothing so far has worked.Also I have taken a 50' ethernet cablefrom the trendnet router to the tv and I do get a connection.I have also taken a laptop through the media bridge and connected to the trendnet router.The customer service at trendnet can't take this to the next level(which is a$40 one session professional service)

View 19 Replies View Related

Sharing :: Laptop Won't Connect To AT&T 2wire Wireless Modem

Feb 22, 2013

I have AT&T 2wire wireless modem. I am working on a friend's computer and his computer detects the modem but won't connect. I have entered the 10 digit number on the router into his laptop and then I tried the homegroup password and still it won't connect.

View 6 Replies View Related

2wire 2701HGV-W Modem - Compatible With The TP-Link WN951N Wireless Card?

Nov 26, 2011

I've got a 2wire 2701HGV-W modem. I was wondering whether it was compatible with the TP-Link WN951N wireless card?

View 5 Replies View Related

How To Change Wireless Router Password

Feb 23, 2013

I need to change my wireless router password

View 1 Replies View Related

2wire Modem Dropping Internet Randomly?

Jun 21, 2011

I'm using a 2wire 2701 HG-B (AT&T). Throughout the day (sometimes even 5minutes apart) the DSL light will turn red, the internet will turn off green and 20-40 seconds later they'll both become green again. It's irritating because it sometimes happens so frequently and causes me to close EVERYTHING I have opened in my browser. If I'm on xbox or an online game, it disconnects completely (even if the light is only red for 15 seconds)I have data error stats .tl;dr: 2wire modem giving me problems. DSL light turns red randomly for 20-40 seconds, sometimes up to twice in 5 minutes.

View 3 Replies View Related

Laptop Unable To Web Browse With 2wire Modem?

Aug 6, 2011

since the past week, I have not been able to use my home internet network properly on my laptop. I'm experiencing a really strange issue with it. Whenever I connect my laptop to my home network and try to use the web browser, I get a message from my modem that says that my laptop has been blocked by parental controls and cannot access web browsing. However, this is incorrect, my laptop has full access with parental control restrictions. This only happens when I try to use the web browserWhen I use a third party application such as Windows Mail it works fine.

View 5 Replies View Related

Change The Password Of Belkin N300 Wireless Router

Oct 17, 2012

i have a belkin n300 wireless router and a embarq 660 modem. i wanted to change the password, i don't like the default password. it's too easy to get hacked. anyway, i tried typing the ip address in the address bar of a browser, and it came up a login page, so i created a new login. and then it opens up a page call ZYXEL total internet access solution. it has a lot of setting and button about the network but i couldn't find a button that can change the wireless router's password.

View 3 Replies View Related

Linksys Wireless Router :: How To Change Password For WRT54G

Apr 9, 2008

I want to know how to change the Router Password. I have two computers running XP connected to my WRT54G; one via cable and the other wirelessly. I'm using WEP security. The router setup defaulted to "admin" for the Router Password; I'd like to make it a stronger password.

View 9 Replies View Related

2wire With 4 Ethernet Ports / Modem Randomly Shuts Itself Off?

Jun 20, 2011

It is a 2wire with 4 Ethernet ports and wireless capability. I have a pc and xbox connected via Ethernet and a laptop and smartphone connected wirelessly. The problem is that my router randomly completely shuts off/resets itself causing me to lose connection. This happens both when things are in use and not in use.

View 3 Replies View Related

Linksys Wireless Router :: Can't Change Admin Password On WRV210

Jul 8, 2011

I just got a WRV 210 wireless router (three of them actually, planning to set up a VPN). But I can't set the admin password. I've tried 4 times, and every time, i've got to hold the reset button to reset to factory settings in order to access the management pages! I enter the new password in both fields, and then click to save the settings. It restarts. Then i try to log in - and it doesn't accept the new password. It doesn't accept the default password. I've tried with admin/(new password) and (new password)/(new password), and admin/admin. None of them work, forcing me to reset router to factory settings. I've tried a password composed of 6 letters followed by a . Thinking that maybe the . was throwing it off, I tried 6 letters followed by 3 numbers. That doesn't work either. I've updated to firmware version 2.0.1.5. No luck.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 - Way To Change Default Password

Oct 3, 2012

Windows 7, WRT54G2 router. How do I change the default Linksys password from "admin" to something of my chosing? I appear not to have the Setup CD. Router is working well but it still has the original password.

View 4 Replies View Related

Linksys Wireless Router :: Wrt54gs2 - Change Password For Wifi?

Mar 26, 2013

how to change the password for my wifi.

View 1 Replies View Related

Routers / Switches :: Change CD-R King Wireless Router Username And Password?

Feb 6, 2012

i want to change my username and password of my router cw-5354 of cd-r king but the default user and password doesn't work anymore so i can't access the control panel.

View 3 Replies View Related

Linksys Wireless Router :: Change Username / Password In Settings For EA4500?

Oct 25, 2012

How do I change the username password in the router settings for the linksys ea4500? It only lets me change the password, I cant find an option to change the username.

View 3 Replies View Related

Linksys Wireless Router :: E1000 Mode - How To Find The Password Or Change It

Dec 25, 2012

This is for a E1000 model router.I recently downloaded Cisco Connect. It wants my router name and password. I don't know the password. How can I find the password or change it? The password might still be the default, but "admin" does not work.

View 3 Replies View Related

Linksys Wireless Router :: E2500 How To Occasionally Change Password To Enter Into Network

Mar 17, 2012

I have an E2500 router. When I enter 192.168.1.1 as a web address I am asked for a User name and password. When I do not enter anything for user name and put “admin” in password the screen again asks me for the same two things and eventually goes to a 401 message.

When I enter admin in user name and my secure password to allow devises to connect to the network it lets me in. I thought the password to enter the system settings and the one to enter the network are usually separate. When I open the Cisco Connect program and go into the various menus there my “secure” password is written and visible for anyone who clicks it. Is this how it is supposed to work?Also, how do I occasionally change the password to enter into the network.

View 6 Replies View Related

Linksys Wireless Router :: E1200 Not Working After Verizon Modem Change?

Jun 24, 2012

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.

View 1 Replies View Related

Wireless :: Need New Password For Modem / Router

Dec 27, 2011

lost password on modum/wireless router

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Change Text Of Guest Password Entry Pop Up On Message?

Sep 11, 2012

I just bought a E4200, is there a way change the default text of the pop up message that is used when the client is requested to put in the password to access the guest SID for the e4200?

View 2 Replies View Related