Laptop Unable To Web Browse With 2wire Modem?
Aug 6, 2011
since the past week, I have not been able to use my home internet network properly on my laptop. I'm experiencing a really strange issue with it. Whenever I connect my laptop to my home network and try to use the web browser, I get a message from my modem that says that my laptop has been blocked by parental controls and cannot access web browsing. However, this is incorrect, my laptop has full access with parental control restrictions. This only happens when I try to use the web browserWhen I use a third party application such as Windows Mail it works fine.
View 5 Replies
ADVERTISEMENT
Feb 22, 2013
I have AT&T 2wire wireless modem. I am working on a friend's computer and his computer detects the modem but won't connect. I have entered the 10 digit number on the router into his laptop and then I tried the homegroup password and still it won't connect.
View 6 Replies
View Related
Mar 14, 2011
I just had new att uverse Internet installed today. My other 2 laptops, iPhone, and iPad connect and can browse the Internet. My compaq computer says it is connected to the Internet by 2WIRE but when I open Internet Explorer or Safari it cannot display the webpage. I tried troubleshooting with an att tech support rep and they said I need to contact my manufacturer to resolve the issue
View 12 Replies
View Related
Jun 1, 2011
I have Aironet 1240AG and the 2 laptops connected to same SSID. Unable to can ping each other but can ping/browse server on wired.
Below are my config:
Current configuration : 2646 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname AP2!enable secret 5 $1$7EVQ$2FN7ewjcrwKCICIfmFgCO.!no
[Code].....
View 2 Replies
View Related
Jun 21, 2011
I'm using a 2wire 2701 HG-B (AT&T). Throughout the day (sometimes even 5minutes apart) the DSL light will turn red, the internet will turn off green and 20-40 seconds later they'll both become green again. It's irritating because it sometimes happens so frequently and causes me to close EVERYTHING I have opened in my browser. If I'm on xbox or an online game, it disconnects completely (even if the light is only red for 15 seconds)I have data error stats .tl;dr: 2wire modem giving me problems. DSL light turns red randomly for 20-40 seconds, sometimes up to twice in 5 minutes.
View 3 Replies
View Related
Nov 27, 2011
I have cable internet can I use 2wire DSL router/modem with cable internet? I need to do wireless in my house?
View 1 Replies
View Related
Mar 1, 2013
I purchaseda trendnet 692 GR router because I understood that I would be able to stream from let's say my computer to my TV that is up the stairs. Here is the problem. I did get the router to use my existing 2Wire 2701HG modem.Yes I can connect my Samsung 6100 to the wireless 2Wire but I thought the trendnet setup would work the best.I and Trendnet support set up my router and media bridge and the two do work but my tv won't work through the MB. I have connected to the network but the next part of the connection (the internet) won't connect. I have tried different IP settings that I thought would connect but nothing so far has worked.Also I have taken a 50' ethernet cablefrom the trendnet router to the tv and I do get a connection.I have also taken a laptop through the media bridge and connected to the trendnet router.The customer service at trendnet can't take this to the next level(which is a$40 one session professional service)
View 19 Replies
View Related
Aug 28, 2011
I am having problems connecting to the internet. It has never done this and just started a week ago. I contacted my ISP and they told me it is not the modems fault. I have a modem and then it goes to a Trendnet 100mpbs Ethernet Switch. Then it goes to my primary computer and then to my laptop. They are all hard-wires. I contacted Acer and they said it wasn't a problem with the computer. When I look at the control panel it says "Unidentified Network" and has no other information than that. I already attempted to manually put in the IP I should be receiving from the modem, but that did not work either.
View 8 Replies
View Related
Jun 20, 2011
It is a 2wire with 4 Ethernet ports and wireless capability. I have a pc and xbox connected via Ethernet and a laptop and smartphone connected wirelessly. The problem is that my router randomly completely shuts off/resets itself causing me to lose connection. This happens both when things are in use and not in use.
View 3 Replies
View Related
Jun 5, 2011
I can connect without any problems on my desktop PC and my other laptop, but it's been nothing but trouble with this one. First I go and try to connect to the network: On the laptop that I have no problems with, this usually comes up: Instead, it goes straight to this, and it doesn't even let me try to type in the password: I'm very new to wireless networks, so I couldn't possibly know what's wrong. I've tried several things, but nothing has worked up to this point.
View 6 Replies
View Related
Nov 26, 2011
I've got a 2wire 2701HGV-W modem. I was wondering whether it was compatible with the TP-Link WN951N wireless card?
View 5 Replies
View Related
Feb 8, 2011
I have a 2wire Modem connected to a Cisco Wireless N Router, that is connected to another Cisco Wireless N Router. All was working well. In my absence sbc (AT&T) changed the pass word of the 2wire Modem. The 2wire has stoped communication with the Cisco Wireless N Routers. I connected am Ethernet wire to one of the ports of the 2wire, and connected it to the 2nd Cisco Wireless N Router. The signal gets to the 2nd Cisco Router. However, when I attempt to access the Internet on the CPU connected to the 2 Cisco Router, I get an error Message saying that there is a problem with the Modem and/or Router. On the available Networks selection screen I can see the connections that I want. The selection info shows connected. But when I try to connect, the I can't.
View 3 Replies
View Related
May 13, 2011
I'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.
Here is the ipconfig /all print:
Windows IP Configuration
Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.
View 5 Replies
View Related
Oct 21, 2011
I have just bought a new router and am trying to connect it. I did the basic set up with an install disc to the problem is that when I connect to the Wireless network it only gives me limited access to the internet for instance I am able to use Skype and other applications that rely on internet connection, but when it comes to web browsers (both Mozilla & Safari) it shows the url section loading but only ever makes it mid way (the page always stays blank) .
View 4 Replies
View Related
Jan 15, 2011
I've tried almost everything but nothing is working for me You see my wireless connection indicates that I am connected with Excellent Strength but when I open any site it doesn't let me and says that the system is offline. I tried MSN and the troubleshoot tells me that Default Gateway is offline
[code]....
View 5 Replies
View Related
Apr 2, 2012
Basically, my internet claims to be connected (via wire to router, computer isn't wireless enabled.) but when I open a browser (I normally use Chrome but no browser is working) it came up with the Error 105 no matter what address I try to accessSo far, I have tried resetting my router and waiting, using cmd to reset winsock and resetlog, I've fiddled with some of the proxy settings and immediate downloads Of course, I'm not entirely certain what half of those things have done, but nothing seems to have worked properly. I've uninstalled all of the firewall/anti-virus programs I had installed, which hasn't changed anything either.I have had the 'connected but not connected' issue before since it happens quite often, but usually I disable it, restart the computer and just connect again, then it'll work - but this time it hasn't.
I noticed to have the information given from ipconfig/all, so I've copied out what I get from that below.* I've just noticed that the host name has changed to STACYSC, when it's not supposed to be. I think this is from me attempting to connect to a wireless connection before I realised it wasn't enabled - could this be an issue[CODE]
View 2 Replies
View Related
Oct 7, 2011
My flatmates and I recently got Sky broadband - their laptops connect just fine to the internet and they are able to use it without any problems. Mine also connects, but I can't do things like browse or use Skype, etc.When I go into Google Chrome, I'm told there is a DNS error that was unable to be resolved. Mozilla tells me that I have a problem with my server, and IE doesn't work either. Also, I am receiving very few packets. For every 2,000 or so packets that are sent, I only receive 2 or 6. When I click 'repair' I am told that my IP address cannot be renewed. The thing is, the internet works on my netbook at my mother's house, yet it doesn't work in my flat or other places like wifi spots.
I've tried so many things, such as clearing the DNS cache, releasing and renewing IP address, I've set the properties of the wireless connection to obtain DNS and IP automatically, I've tried pinging, I've turned off all my firewalls, I tried system restore, I've fiddled with certain keys in the registry, I even rebooted my entire hard disk last night and it still doesn't work! I'm really at my wit's end with this and I don't know what else to do. The problem is way beyond my comprehension now.
View 14 Replies
View Related
Apr 19, 2012
My pc (windows7) will say its connected.. It even says internet access.. But when I click in the Internet?THE WEB PAGE IS NOT AVAILABLE. It says the DNS lookup failed. But the thing is... all my friends bring their laptops over (Mac & Pc) and try work fine. Even my phone catches the wifi perfectly in my house. I started to think maybe it was the laptop but the laptop word great on wifi at my job, my friends house, and pretty much anywhere with wifi but my house. I have wifi through bright house and they came to my house one day but they ended up not doing anything because they can only make sure there device (router) works perfectly. Ok.. So I took the laptop to best buy's geek squad and the guy "reseted my network card" & told me it should e fine when I got home.. Nope. Didn't work. I have spent hours looking trough the Internet trying things that people recommended I do. (start, run, cmd) I've tried it all. It just won't work. I really need this laptop to work at home because I do a lot of work from the pc. I hope somebody on here could point me into the right direction before I give up & toss this laptop in the shed and be forced to purchase a new one.
View 8 Replies
View Related
Jan 22, 2011
I have been stuck in a strange problems which happens occasionally--but too often to be ignored.I have a Windows 2003 Server running as a virtual machine via MS Virtual PC 2007. The host machine is a Windows 7 Home Premium 64-bit. This setup used to run fine where I had no issues accessing the guest OS (Win 2003). My development environment is Visual Studio 2005 and 2010 based, both running on the host machine.Some days ago I started working on a ASP .NET application which had a lots of files on the guest OS. That would cause the dreaded 'Network Bios Limit Reached' error in VS. So tweaked a few Registry keys on both host and guest and that problem went away. But then I started to get a new kind of problem: Occasionally, within VS 2010, I could not save files and that would be so bad that the entire guest OS cannot be browsed (but can be seen in the Network Neighborhood and be pinged as well).I have undone all Registry changes in both guest and host but I still see this problem. Only the virtual machine running Win 2003 is occasionally un-browseable but still ping-able by other intranet computers: Win xp, vista, Win 7 but cannot browse until the guest win 2003 is re-started.Is it some kind of network buffer being too full? So far I only see this problem when working inside Visual Studio 2010 but it could be happening elsewhere. The guest win 2003 is assigned a static ip of 192.168.1.7 by the router, btw.
View 8 Replies
View Related
Apr 24, 2013
i have all of my music/ films on PC running windows 7 (might upgrade to 8) i would like to be able to browse my collection on a tablet (using it as a remote) and be able to play it through my stereo / tv. i would like this done with as few wires as possible none would be best im guessing i will need some from the pc to the stereo and tv
View 1 Replies
View Related
Sep 5, 2012
Upgraded my OS from Windows Vista Home Premium to Windows 7 Ultimate. When all was done and over, updates installed and so on I upgraded the Internet Explorer as well from IE 8 (included in the Win 7 install) to IE 9 (I used to have IE 9 before on Vista). A little bit after that I had to uninstall re-install the VPN client for my work and things started going south. Currently after I start the computer the MSN Messenger is not working, the Yahoo messenger is not working, IE, Firefox and Chrome are not working.
IE just hangs, sometimes is displaying [<endif!>] but it seems to find the sites because I can see the icon of the page changinghrome is not able to connect even to google.com but it let's me down nicely (doesn't hog resources like IE does)The Internet connection is fine because I can ping, I can connect to my work's VPN, sometimes even some https pages are briefly working.Once I connect to the VPN everything works great.Now comes the weird part after I connect to the VPN and disconnect, the browsers work, the IM works ... so something gets reset in that process and makes it fine but I have no idea what. (NOTE: IE9 is still barely moving - you request a page go get a snack and maybe it has loaded)
View 1 Replies
View Related
Aug 30, 2012
I am using a Dell Latitude E6400 Laptop and have been wirelessly connected to our home internet for several years without any problems. However, of late I have been having problems browsing despite my connection being OK and signal being very good. I am able to still listen to music on spotify, as well as chat on facebook, but cannot load web pages or search for anything on youtube/google etc. I use google chrome but experience the same problem on IE.
I have checked whether it is a problem with malware and have removed all threats, but still the problem persists. the only way I have found of temporarily fixing it is disabling the wireless and reconnecting, whereby it will work perfectly again for anything between 5-50 minutes.I have not changed my router recently so do not think that is the issue. I'm beginning it may just be a hardware fault with the laptop.
View 3 Replies
View Related
Oct 2, 2012
I am connected to the internet wirelessly with an "excellent" connection; however, when I open up IE or Firefox I receive an error message that I'm not connected to the web.I've tried everything.. every internet setting.. taking away all the security, etc..
View 1 Replies
View Related
Mar 12, 2012
whenever I try and access the internet from my laptop it keeps on loading...seriously like forever it never stops... I have tried a lot of things which actually worked but only for a limited amount of time. Lately I had been lucky to get my hands on some cmd commands which were abletil I restarted the laptop, I then performed the following commands every time I started the laptop: netsh winsock reset catalog, netsh int ipv(ip, ipv4 and ipv6) reset reset.log.I also tried ipconfig/flushdns which worked for like 5 seconds, they worked only for 1 week. I have 1 computer and 2 laptops, the computer can connect and browse my sisters laptop too but my one not. I was setting up both my and my sisters wifi, it took ages to get done once it worked for me once for my sister and then it stopped working for me and i got it running on my sister.[CODE]
View 6 Replies
View Related
Jan 4, 2012
[code]...
Unable to connect to DNS server/browse internet
View 8 Replies
View Related
Nov 2, 2011
I have an XPS 400 Computer window xpm os. Cannot browse on the internet:Its says, unable to view webpage. My connections (modeum/router) seems to be working.Had ISP check an everthing checked out.control Panel shows internet connected.
View 14 Replies
View Related
Oct 24, 2011
Computer is Win 7, SP1 fully updated.I can browse to most other web site, but cannot go to Google or YouTube - Broadcast Yourself.
Tried a bunch of stuff like flushdns, winsock fix, clearing cache. Nothing works.Cannot ping to Google either.Gives in ip address but times out.Even when typing in the google ip that returns from the ping cmd it will not go to the web site.
View 2 Replies
View Related
Oct 31, 2011
How possible is it to use a linksys cable modem cm100 with a strong srt4669x decoder to browse the internet?
View 4 Replies
View Related
Sep 3, 2012
I have installed a CISCO v887 router in Amsterdam officeI established a VPN tunnel between AMS office and Edinburg office.
1. The VPN is up and running
2. I am unable to browse anything from LAN computers in Amsterdam office.
3. From LAN computers I can traceroute to yahoo.com but from browser I cant browse yahoo.com and web page hanged out in this situation (website found waiting for reply). But nothing comes over and LAN users are unable to use internet.
[code]...
View 11 Replies
View Related
Apr 17, 2011
Any good solution to connect to TV and be able to browse internet wirelessly. I did some research and their were 3 categories:-1/Roku/Boxee kinds set up boxes where they have their own user interface, they connect without laptop and are economical but are limited in terms of conetent of internet you can see. I think you dont have the browser inbuilt with these, even if it there then it is genrally cumbersome to browse through their ever evolving interfaces.Additionally you cant view contents on your laptop(obviously you are not routed via a laptop!)2/USB wireless adapters like Warpia where you hook one usb enable device like a pendrive in your laptop and connect a small base to TV which is also wireless enable and then these two transmit A/V signals. Sounds great as then your laptop becomes the source and remote. this is closest to my need but i am not sure of over all practicality of the solution. 3/Nettops where you buy a cheap nettop and hookup the nettop to TV and use wireless keyboards and mouse to browse the contents on TV 4/I saw some gaming consoles like Xbox and PS3 offering the ability of browsing intenert over TV, though for this purpose this may not be the best solution...but this I considered due to price comparision with nettop.
View 4 Replies
View Related
Nov 3, 2011
I try pinging google, its fine, antivirus and other software update in time, but internet browsers cannot browse net
View 4 Replies
View Related
Apr 6, 2013
I really worked hard not to write this question here but here I am. I am trying to route all traffic through vpn but I cant browse the web. It seems no traffic goes through the vpn tunnel. Split tunneling works but it doesnt route the traffic through vpn tunnel. I have a cisco asa5505 with base license,
When I try to browse the web with one of the clients I see lots of
6Apr 07 201309:40:5510.10.50.136088410.10.10.153Built inbound UDP connection 834 for outside:10.10.50.13/60884 (10.10.50.13/60884) to outside:10.10.10.1/53 (10.10.10.1/53) (xxxx
messages but at the end I see " Safari could not open the page because the server stopped responding" message or smth similar.
My setup is
Vpn Clients ====== asa5505 ========== CiscoLinksysEA4500 Router ======== ISPProvidedFiberConverterDevice(huawei)
10.10.30.10-10.10.30.50 10.10.10.2(outside int) 10.10.10.1(inside) PPOE(outside)
[Code].....
View 1 Replies
View Related
Dec 2, 2011
I am facing a problem that I can not browse the websites (or receive POP emails, but I can send emails) via the DSL router CISCO1941/K9, the DHCP is configured at the Switch (not on this router) and actually the PCs are able to do a ping for the hosts (like [URL] and so on) but they can not browse !!
Below is my DSL router configuration if u would to give a look
Router#show running-configBuilding configuration...
Current configuration : 3434 bytes!! Last configuration change at 19:26:41 UTC Sat Dec 3 2011 by bilal!version 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname
[Code]......
View 4 Replies
View Related
