Unable To Browse Anything
Oct 21, 2011
I have just bought a new router and am trying to connect it. I did the basic set up with an install disc to the problem is that when I connect to the Wireless network it only gives me limited access to the internet for instance I am able to use Skype and other applications that rely on internet connection, but when it comes to web browsers (both Mozilla & Safari) it shows the url section loading but only ever makes it mid way (the page always stays blank) .
View 4 Replies
ADVERTISEMENT
Jan 15, 2011
I've tried almost everything but nothing is working for me You see my wireless connection indicates that I am connected with Excellent Strength but when I open any site it doesn't let me and says that the system is offline. I tried MSN and the troubleshoot tells me that Default Gateway is offline
[code]....
View 5 Replies
View Related
Apr 2, 2012
Basically, my internet claims to be connected (via wire to router, computer isn't wireless enabled.) but when I open a browser (I normally use Chrome but no browser is working) it came up with the Error 105 no matter what address I try to accessSo far, I have tried resetting my router and waiting, using cmd to reset winsock and resetlog, I've fiddled with some of the proxy settings and immediate downloads Of course, I'm not entirely certain what half of those things have done, but nothing seems to have worked properly. I've uninstalled all of the firewall/anti-virus programs I had installed, which hasn't changed anything either.I have had the 'connected but not connected' issue before since it happens quite often, but usually I disable it, restart the computer and just connect again, then it'll work - but this time it hasn't.
I noticed to have the information given from ipconfig/all, so I've copied out what I get from that below.* I've just noticed that the host name has changed to STACYSC, when it's not supposed to be. I think this is from me attempting to connect to a wireless connection before I realised it wasn't enabled - could this be an issue[CODE]
View 2 Replies
View Related
Oct 7, 2011
My flatmates and I recently got Sky broadband - their laptops connect just fine to the internet and they are able to use it without any problems. Mine also connects, but I can't do things like browse or use Skype, etc.When I go into Google Chrome, I'm told there is a DNS error that was unable to be resolved. Mozilla tells me that I have a problem with my server, and IE doesn't work either. Also, I am receiving very few packets. For every 2,000 or so packets that are sent, I only receive 2 or 6. When I click 'repair' I am told that my IP address cannot be renewed. The thing is, the internet works on my netbook at my mother's house, yet it doesn't work in my flat or other places like wifi spots.
I've tried so many things, such as clearing the DNS cache, releasing and renewing IP address, I've set the properties of the wireless connection to obtain DNS and IP automatically, I've tried pinging, I've turned off all my firewalls, I tried system restore, I've fiddled with certain keys in the registry, I even rebooted my entire hard disk last night and it still doesn't work! I'm really at my wit's end with this and I don't know what else to do. The problem is way beyond my comprehension now.
View 14 Replies
View Related
Apr 19, 2012
My pc (windows7) will say its connected.. It even says internet access.. But when I click in the Internet?THE WEB PAGE IS NOT AVAILABLE. It says the DNS lookup failed. But the thing is... all my friends bring their laptops over (Mac & Pc) and try work fine. Even my phone catches the wifi perfectly in my house. I started to think maybe it was the laptop but the laptop word great on wifi at my job, my friends house, and pretty much anywhere with wifi but my house. I have wifi through bright house and they came to my house one day but they ended up not doing anything because they can only make sure there device (router) works perfectly. Ok.. So I took the laptop to best buy's geek squad and the guy "reseted my network card" & told me it should e fine when I got home.. Nope. Didn't work. I have spent hours looking trough the Internet trying things that people recommended I do. (start, run, cmd) I've tried it all. It just won't work. I really need this laptop to work at home because I do a lot of work from the pc. I hope somebody on here could point me into the right direction before I give up & toss this laptop in the shed and be forced to purchase a new one.
View 8 Replies
View Related
Jan 22, 2011
I have been stuck in a strange problems which happens occasionally--but too often to be ignored.I have a Windows 2003 Server running as a virtual machine via MS Virtual PC 2007. The host machine is a Windows 7 Home Premium 64-bit. This setup used to run fine where I had no issues accessing the guest OS (Win 2003). My development environment is Visual Studio 2005 and 2010 based, both running on the host machine.Some days ago I started working on a ASP .NET application which had a lots of files on the guest OS. That would cause the dreaded 'Network Bios Limit Reached' error in VS. So tweaked a few Registry keys on both host and guest and that problem went away. But then I started to get a new kind of problem: Occasionally, within VS 2010, I could not save files and that would be so bad that the entire guest OS cannot be browsed (but can be seen in the Network Neighborhood and be pinged as well).I have undone all Registry changes in both guest and host but I still see this problem. Only the virtual machine running Win 2003 is occasionally un-browseable but still ping-able by other intranet computers: Win xp, vista, Win 7 but cannot browse until the guest win 2003 is re-started.Is it some kind of network buffer being too full? So far I only see this problem when working inside Visual Studio 2010 but it could be happening elsewhere. The guest win 2003 is assigned a static ip of 192.168.1.7 by the router, btw.
View 8 Replies
View Related
Apr 24, 2013
i have all of my music/ films on PC running windows 7 (might upgrade to 8) i would like to be able to browse my collection on a tablet (using it as a remote) and be able to play it through my stereo / tv. i would like this done with as few wires as possible none would be best im guessing i will need some from the pc to the stereo and tv
View 1 Replies
View Related
Sep 5, 2012
Upgraded my OS from Windows Vista Home Premium to Windows 7 Ultimate. When all was done and over, updates installed and so on I upgraded the Internet Explorer as well from IE 8 (included in the Win 7 install) to IE 9 (I used to have IE 9 before on Vista). A little bit after that I had to uninstall re-install the VPN client for my work and things started going south. Currently after I start the computer the MSN Messenger is not working, the Yahoo messenger is not working, IE, Firefox and Chrome are not working.
IE just hangs, sometimes is displaying [<endif!>] but it seems to find the sites because I can see the icon of the page changinghrome is not able to connect even to google.com but it let's me down nicely (doesn't hog resources like IE does)The Internet connection is fine because I can ping, I can connect to my work's VPN, sometimes even some https pages are briefly working.Once I connect to the VPN everything works great.Now comes the weird part after I connect to the VPN and disconnect, the browsers work, the IM works ... so something gets reset in that process and makes it fine but I have no idea what. (NOTE: IE9 is still barely moving - you request a page go get a snack and maybe it has loaded)
View 1 Replies
View Related
Aug 30, 2012
I am using a Dell Latitude E6400 Laptop and have been wirelessly connected to our home internet for several years without any problems. However, of late I have been having problems browsing despite my connection being OK and signal being very good. I am able to still listen to music on spotify, as well as chat on facebook, but cannot load web pages or search for anything on youtube/google etc. I use google chrome but experience the same problem on IE.
I have checked whether it is a problem with malware and have removed all threats, but still the problem persists. the only way I have found of temporarily fixing it is disabling the wireless and reconnecting, whereby it will work perfectly again for anything between 5-50 minutes.I have not changed my router recently so do not think that is the issue. I'm beginning it may just be a hardware fault with the laptop.
View 3 Replies
View Related
Oct 2, 2012
I am connected to the internet wirelessly with an "excellent" connection; however, when I open up IE or Firefox I receive an error message that I'm not connected to the web.I've tried everything.. every internet setting.. taking away all the security, etc..
View 1 Replies
View Related
Jan 4, 2012
[code]...
Unable to connect to DNS server/browse internet
View 8 Replies
View Related
Aug 6, 2011
since the past week, I have not been able to use my home internet network properly on my laptop. I'm experiencing a really strange issue with it. Whenever I connect my laptop to my home network and try to use the web browser, I get a message from my modem that says that my laptop has been blocked by parental controls and cannot access web browsing. However, this is incorrect, my laptop has full access with parental control restrictions. This only happens when I try to use the web browserWhen I use a third party application such as Windows Mail it works fine.
View 5 Replies
View Related
Nov 2, 2011
I have an XPS 400 Computer window xpm os. Cannot browse on the internet:Its says, unable to view webpage. My connections (modeum/router) seems to be working.Had ISP check an everthing checked out.control Panel shows internet connected.
View 14 Replies
View Related
Oct 24, 2011
Computer is Win 7, SP1 fully updated.I can browse to most other web site, but cannot go to Google or YouTube - Broadcast Yourself.
Tried a bunch of stuff like flushdns, winsock fix, clearing cache. Nothing works.Cannot ping to Google either.Gives in ip address but times out.Even when typing in the google ip that returns from the ping cmd it will not go to the web site.
View 2 Replies
View Related
Sep 3, 2012
I have installed a CISCO v887 router in Amsterdam officeI established a VPN tunnel between AMS office and Edinburg office.
1. The VPN is up and running
2. I am unable to browse anything from LAN computers in Amsterdam office.
3. From LAN computers I can traceroute to yahoo.com but from browser I cant browse yahoo.com and web page hanged out in this situation (website found waiting for reply). But nothing comes over and LAN users are unable to use internet.
[code]...
View 11 Replies
View Related
Jun 1, 2011
I have Aironet 1240AG and the 2 laptops connected to same SSID. Unable to can ping each other but can ping/browse server on wired.
Below are my config:
Current configuration : 2646 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname AP2!enable secret 5 $1$7EVQ$2FN7ewjcrwKCICIfmFgCO.!no
[Code].....
View 2 Replies
View Related
Apr 6, 2013
I really worked hard not to write this question here but here I am. I am trying to route all traffic through vpn but I cant browse the web. It seems no traffic goes through the vpn tunnel. Split tunneling works but it doesnt route the traffic through vpn tunnel. I have a cisco asa5505 with base license,
When I try to browse the web with one of the clients I see lots of
6Apr 07 201309:40:5510.10.50.136088410.10.10.153Built inbound UDP connection 834 for outside:10.10.50.13/60884 (10.10.50.13/60884) to outside:10.10.10.1/53 (10.10.10.1/53) (xxxx
messages but at the end I see " Safari could not open the page because the server stopped responding" message or smth similar.
My setup is
Vpn Clients ====== asa5505 ========== CiscoLinksysEA4500 Router ======== ISPProvidedFiberConverterDevice(huawei)
10.10.30.10-10.10.30.50 10.10.10.2(outside int) 10.10.10.1(inside) PPOE(outside)
[Code].....
View 1 Replies
View Related
Dec 2, 2011
I am facing a problem that I can not browse the websites (or receive POP emails, but I can send emails) via the DSL router CISCO1941/K9, the DHCP is configured at the Switch (not on this router) and actually the PCs are able to do a ping for the hosts (like [URL] and so on) but they can not browse !!
Below is my DSL router configuration if u would to give a look
Router#show running-configBuilding configuration...
Current configuration : 3434 bytes!! Last configuration change at 19:26:41 UTC Sat Dec 3 2011 by bilal!version 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname
[Code]......
View 4 Replies
View Related
Nov 12, 2011
Well actually now i have another problem. I easily works to like search on google. for example wikipedia works too. But from the moment i want to go to facebook or something similar, it doesn't work?
View 1 Replies
View Related
Nov 13, 2012
I am working on a friends vista machine and I cannot browse the web internet is connected I can ping say 8.8.8.8 and get a reply but if I ping (url)it say its unreachable. I have reset winsock and the tcpip stack stopped and started the DNS service tried manually entering DNS servers and no luck.
View 3 Replies
View Related
May 25, 2011
Since my brother doesn't want me to download things from his network, I have to use some other guys network. The problem is not to connect, but it's to browse the internet. I do not know why this happens, but it does. The network is unsafe if that
View 1 Replies
View Related
Jan 19, 2011
We've got about 15pcs at work, all on one network. All connect to one switch, and the router connects to the switch so all has internet access. Four pcs has got windows vista on, the rest XP. Yesterday I tuned on the one pc with Vista on, but could not connect to a mapped drive. I checked in the network places, i could see only three pcs, all three xp pcs. I can browse the internet, but not the pcs on my local network, and I can ping the pcs on the network.
View 1 Replies
View Related
Jun 1, 2011
I cant browse my NAS through Network view in Win 7.
I can Ping it and can connect network shares by using it's IP address but it wont appear in my Network as an Icon. My wifes win 7 laptop does see the NAS in her network. I can also see my wifes laptop in the network view. So it must be my laptop.
It must be that my laptop is not resolving the name properly for some reason.
View 1 Replies
View Related
Feb 3, 2012
I have a very strange problem affecting my LAN. New entrants to the network can ping successfuly but cannot browse. Rest of the pcs that have been on the network before are browsing quite fine. Even when I connect new PC directly to the router LAN ports, problem still persists. I've tried four different new laptops so far. I've even intalled a new router to no avail.
View 19 Replies
View Related
Jan 8, 2013
when i brows the internet it says " no data received" and i tried this to every browser i have and still no connection it happened first time hours ago i tried shutting it down and restarting it but its still not working my os is windows 7 home premium. i don't know what i did and my friends don't know how to fix it. we have 3 laptops, 2 other laptops doesnt have a problem.
View 2 Replies
View Related
May 12, 2011
I am running windows XP on a computer that I use solely for my business' POS system - therefore not being able to connect to the internet is a problem as I cannot process credit cards. I have checked with the linksys (for router) and internet service provider - everything is working fine as you can see because I am posting from another computer. However the computer that is hardwired to the modem and router cannot access the internet. I get a "connecting" message then a quick "login failure" then a " internet explorer cannot display this page" message
View 1 Replies
View Related
Sep 30, 2011
We usually connect to a remote server through VPN connection. Nowadays we are unable to browse internet after we estabilish VPN connection. I searched many forums and site and got a temporary solution Go go properties of VPN connection - click on networking tab - properties of IPv4/ IPv6 - go to advanced - in ipsettings tab - uncheck "use default gateway on remote network"
After doing this Im able to browse internet but my concern is the external IP should be of the remote system and not my original IP so that I get access to my remote LAN network.Even I'm able to find a temporary solution for this. After doing this setting we need to connect VPN and disconnect it and go for same setting but you need to check "use default gateway on remote network". Now connect VPN and everything seem to work fine , I'm able browse internet and my IP remains of the remote network and everything is working fine till the VPN connection is disconnected.
View 5 Replies
View Related
Apr 14, 2011
I have no virus/malware (malwarebites) that i can find. All of the firewall's i know of are off and all antivirus software.I Have a desktop computer with Windows XP Pro. I have Cable internet and I am connected through a modem > router > computer.I will copy & paste (from flash drive) onto here the following commands as i have seen numerous requests for this information on other inquiry's that i have read.
[code]....
View 14 Replies
View Related
Apr 23, 2012
Computer always says it is connected to the internet, but I can only browse sometimes? I can always talk on chat on skype and use spotify. Other programs, like League of Legends I can also use, if I was signed in while the internet was working BUT if I start a game while not being able to browse, the game will crash when I'm about to go in-game. Everyone else in my house can access the internet from same router.
View 3 Replies
View Related
May 12, 2011
The first thing that came to mind was DNS. There's just 1 of about 50 people here who's having this issue. He can't browse to the network share (\servershare) using the hostname, but he can by IP address.I've checked the host file, looks normal. I can ping the server by hostname or IP address. And in fact, after going to \server, it shows 1 share which we deleted 2 days ago. It only shows 1 share when there's in fact about 20. This only happens when browsing to the server via hostname.If we browse by IP address, he can see all of the shares on the server.. (\192.168.x.x)
View 4 Replies
View Related
Feb 10, 2012
I can ping all the devices on my network but cannot browse any pc/server, mapped drives now disconnected. I can access the laptop from another machine and can browse the internet from the laptop. It has windows 7 ultimate. I have tried everything from forums, sfc/ scannow, flushdns, all services started.
View 12 Replies
View Related
Apr 5, 2012
My laptop power cord failed and replacing it is beyond my current budget so must get my old desktop up. I've got it connected but it won't surf the web. Says excellent connection.... But no connection seems evident if I try to go online.
View 3 Replies
View Related
Aug 22, 2011
I have an issues with a hp pavillion desktop. I just reinstalled vista home 32 bit and everything loaded just fine open IE and down at bottom left ip address is showing instead of verbal address. It displays internet explorer cannot display the webpage. ive tried diagnose connection problem and it tried to reset netowork adapter with no luck.Reinstalled network card, reset IE browser to default, started in safe mode with networking and still nothing.I pinged yahoo and got 4 recieved 4 sent. I have no errors in device manager. I called Isp provider and they said something is blocking from recieving, i need to take it in to have it fixed. i have 2 other computers on the same network wirelessly working fine, unplugged cable from hp destop and plugged it into other pc and cable is working just fine.
View 3 Replies
View Related
