Cisco VPN :: Unable To Browse From LAN Desktops Via 887 VDSL Router
Sep 3, 2012
I have installed a CISCO v887 router in Amsterdam officeI established a VPN tunnel between AMS office and Edinburg office.
1. The VPN is up and running
2. I am unable to browse anything from LAN computers in Amsterdam office.
3. From LAN computers I can traceroute to yahoo.com but from browser I cant browse yahoo.com and web page hanged out in this situation (website found waiting for reply). But nothing comes over and LAN users are unable to use internet.
[code]...
View 11 Replies
ADVERTISEMENT
Aug 24, 2012
Just got hold of my first 887va for my home, never configured a vdsl interface before and was just wondering if my setup looked good to someone whos done it a few times.
View 6 Replies
View Related
Dec 2, 2011
I am facing a problem that I can not browse the websites (or receive POP emails, but I can send emails) via the DSL router CISCO1941/K9, the DHCP is configured at the Switch (not on this router) and actually the PCs are able to do a ping for the hosts (like [URL] and so on) but they can not browse !!
Below is my DSL router configuration if u would to give a look
Router#show running-configBuilding configuration...
Current configuration : 3434 bytes!! Last configuration change at 19:26:41 UTC Sat Dec 3 2011 by bilal!version 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname
[Code]......
View 4 Replies
View Related
Oct 21, 2011
I have just bought a new router and am trying to connect it. I did the basic set up with an install disc to the problem is that when I connect to the Wireless network it only gives me limited access to the internet for instance I am able to use Skype and other applications that rely on internet connection, but when it comes to web browsers (both Mozilla & Safari) it shows the url section loading but only ever makes it mid way (the page always stays blank) .
View 4 Replies
View Related
Jan 15, 2011
I've tried almost everything but nothing is working for me You see my wireless connection indicates that I am connected with Excellent Strength but when I open any site it doesn't let me and says that the system is offline. I tried MSN and the troubleshoot tells me that Default Gateway is offline
[code]....
View 5 Replies
View Related
Apr 2, 2012
Basically, my internet claims to be connected (via wire to router, computer isn't wireless enabled.) but when I open a browser (I normally use Chrome but no browser is working) it came up with the Error 105 no matter what address I try to accessSo far, I have tried resetting my router and waiting, using cmd to reset winsock and resetlog, I've fiddled with some of the proxy settings and immediate downloads Of course, I'm not entirely certain what half of those things have done, but nothing seems to have worked properly. I've uninstalled all of the firewall/anti-virus programs I had installed, which hasn't changed anything either.I have had the 'connected but not connected' issue before since it happens quite often, but usually I disable it, restart the computer and just connect again, then it'll work - but this time it hasn't.
I noticed to have the information given from ipconfig/all, so I've copied out what I get from that below.* I've just noticed that the host name has changed to STACYSC, when it's not supposed to be. I think this is from me attempting to connect to a wireless connection before I realised it wasn't enabled - could this be an issue[CODE]
View 2 Replies
View Related
Oct 7, 2011
My flatmates and I recently got Sky broadband - their laptops connect just fine to the internet and they are able to use it without any problems. Mine also connects, but I can't do things like browse or use Skype, etc.When I go into Google Chrome, I'm told there is a DNS error that was unable to be resolved. Mozilla tells me that I have a problem with my server, and IE doesn't work either. Also, I am receiving very few packets. For every 2,000 or so packets that are sent, I only receive 2 or 6. When I click 'repair' I am told that my IP address cannot be renewed. The thing is, the internet works on my netbook at my mother's house, yet it doesn't work in my flat or other places like wifi spots.
I've tried so many things, such as clearing the DNS cache, releasing and renewing IP address, I've set the properties of the wireless connection to obtain DNS and IP automatically, I've tried pinging, I've turned off all my firewalls, I tried system restore, I've fiddled with certain keys in the registry, I even rebooted my entire hard disk last night and it still doesn't work! I'm really at my wit's end with this and I don't know what else to do. The problem is way beyond my comprehension now.
View 14 Replies
View Related
Apr 19, 2012
My pc (windows7) will say its connected.. It even says internet access.. But when I click in the Internet?THE WEB PAGE IS NOT AVAILABLE. It says the DNS lookup failed. But the thing is... all my friends bring their laptops over (Mac & Pc) and try work fine. Even my phone catches the wifi perfectly in my house. I started to think maybe it was the laptop but the laptop word great on wifi at my job, my friends house, and pretty much anywhere with wifi but my house. I have wifi through bright house and they came to my house one day but they ended up not doing anything because they can only make sure there device (router) works perfectly. Ok.. So I took the laptop to best buy's geek squad and the guy "reseted my network card" & told me it should e fine when I got home.. Nope. Didn't work. I have spent hours looking trough the Internet trying things that people recommended I do. (start, run, cmd) I've tried it all. It just won't work. I really need this laptop to work at home because I do a lot of work from the pc. I hope somebody on here could point me into the right direction before I give up & toss this laptop in the shed and be forced to purchase a new one.
View 8 Replies
View Related
Jan 22, 2011
I have been stuck in a strange problems which happens occasionally--but too often to be ignored.I have a Windows 2003 Server running as a virtual machine via MS Virtual PC 2007. The host machine is a Windows 7 Home Premium 64-bit. This setup used to run fine where I had no issues accessing the guest OS (Win 2003). My development environment is Visual Studio 2005 and 2010 based, both running on the host machine.Some days ago I started working on a ASP .NET application which had a lots of files on the guest OS. That would cause the dreaded 'Network Bios Limit Reached' error in VS. So tweaked a few Registry keys on both host and guest and that problem went away. But then I started to get a new kind of problem: Occasionally, within VS 2010, I could not save files and that would be so bad that the entire guest OS cannot be browsed (but can be seen in the Network Neighborhood and be pinged as well).I have undone all Registry changes in both guest and host but I still see this problem. Only the virtual machine running Win 2003 is occasionally un-browseable but still ping-able by other intranet computers: Win xp, vista, Win 7 but cannot browse until the guest win 2003 is re-started.Is it some kind of network buffer being too full? So far I only see this problem when working inside Visual Studio 2010 but it could be happening elsewhere. The guest win 2003 is assigned a static ip of 192.168.1.7 by the router, btw.
View 8 Replies
View Related
Apr 24, 2013
i have all of my music/ films on PC running windows 7 (might upgrade to 8) i would like to be able to browse my collection on a tablet (using it as a remote) and be able to play it through my stereo / tv. i would like this done with as few wires as possible none would be best im guessing i will need some from the pc to the stereo and tv
View 1 Replies
View Related
Sep 5, 2012
Upgraded my OS from Windows Vista Home Premium to Windows 7 Ultimate. When all was done and over, updates installed and so on I upgraded the Internet Explorer as well from IE 8 (included in the Win 7 install) to IE 9 (I used to have IE 9 before on Vista). A little bit after that I had to uninstall re-install the VPN client for my work and things started going south. Currently after I start the computer the MSN Messenger is not working, the Yahoo messenger is not working, IE, Firefox and Chrome are not working.
IE just hangs, sometimes is displaying [<endif!>] but it seems to find the sites because I can see the icon of the page changinghrome is not able to connect even to google.com but it let's me down nicely (doesn't hog resources like IE does)The Internet connection is fine because I can ping, I can connect to my work's VPN, sometimes even some https pages are briefly working.Once I connect to the VPN everything works great.Now comes the weird part after I connect to the VPN and disconnect, the browsers work, the IM works ... so something gets reset in that process and makes it fine but I have no idea what. (NOTE: IE9 is still barely moving - you request a page go get a snack and maybe it has loaded)
View 1 Replies
View Related
Aug 30, 2012
I am using a Dell Latitude E6400 Laptop and have been wirelessly connected to our home internet for several years without any problems. However, of late I have been having problems browsing despite my connection being OK and signal being very good. I am able to still listen to music on spotify, as well as chat on facebook, but cannot load web pages or search for anything on youtube/google etc. I use google chrome but experience the same problem on IE.
I have checked whether it is a problem with malware and have removed all threats, but still the problem persists. the only way I have found of temporarily fixing it is disabling the wireless and reconnecting, whereby it will work perfectly again for anything between 5-50 minutes.I have not changed my router recently so do not think that is the issue. I'm beginning it may just be a hardware fault with the laptop.
View 3 Replies
View Related
Oct 2, 2012
I am connected to the internet wirelessly with an "excellent" connection; however, when I open up IE or Firefox I receive an error message that I'm not connected to the web.I've tried everything.. every internet setting.. taking away all the security, etc..
View 1 Replies
View Related
Jan 4, 2012
[code]...
Unable to connect to DNS server/browse internet
View 8 Replies
View Related
Aug 6, 2011
since the past week, I have not been able to use my home internet network properly on my laptop. I'm experiencing a really strange issue with it. Whenever I connect my laptop to my home network and try to use the web browser, I get a message from my modem that says that my laptop has been blocked by parental controls and cannot access web browsing. However, this is incorrect, my laptop has full access with parental control restrictions. This only happens when I try to use the web browserWhen I use a third party application such as Windows Mail it works fine.
View 5 Replies
View Related
Nov 2, 2011
I have an XPS 400 Computer window xpm os. Cannot browse on the internet:Its says, unable to view webpage. My connections (modeum/router) seems to be working.Had ISP check an everthing checked out.control Panel shows internet connected.
View 14 Replies
View Related
Oct 24, 2011
Computer is Win 7, SP1 fully updated.I can browse to most other web site, but cannot go to Google or YouTube - Broadcast Yourself.
Tried a bunch of stuff like flushdns, winsock fix, clearing cache. Nothing works.Cannot ping to Google either.Gives in ip address but times out.Even when typing in the google ip that returns from the ping cmd it will not go to the web site.
View 2 Replies
View Related
Jun 1, 2011
I have Aironet 1240AG and the 2 laptops connected to same SSID. Unable to can ping each other but can ping/browse server on wired.
Below are my config:
Current configuration : 2646 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname AP2!enable secret 5 $1$7EVQ$2FN7ewjcrwKCICIfmFgCO.!no
[Code].....
View 2 Replies
View Related
Apr 6, 2013
I really worked hard not to write this question here but here I am. I am trying to route all traffic through vpn but I cant browse the web. It seems no traffic goes through the vpn tunnel. Split tunneling works but it doesnt route the traffic through vpn tunnel. I have a cisco asa5505 with base license,
When I try to browse the web with one of the clients I see lots of
6Apr 07 201309:40:5510.10.50.136088410.10.10.153Built inbound UDP connection 834 for outside:10.10.50.13/60884 (10.10.50.13/60884) to outside:10.10.10.1/53 (10.10.10.1/53) (xxxx
messages but at the end I see " Safari could not open the page because the server stopped responding" message or smth similar.
My setup is
Vpn Clients ====== asa5505 ========== CiscoLinksysEA4500 Router ======== ISPProvidedFiberConverterDevice(huawei)
10.10.30.10-10.10.30.50 10.10.10.2(outside int) 10.10.10.1(inside) PPOE(outside)
[Code].....
View 1 Replies
View Related
Oct 29, 2009
I have a WRT310N wireless router (Ver 1). In the house we've got 1 macbook, 2 laptops running windows vista, and 2 desktops running windows XP.The original problem is that both desktops will not connect wirelessly. All 3 laptops connect but neither desktop wants to connect. Most of the time neither desktop will even recognize the wireless network. On one of the desktops we bought and installed a linksys wireless-n pci adapter. It was installed using the software that came with it and the drivers were updated. It still does not recognize the network or connect (obviously).
This has led me to try to upgrade the firmware on the router. The firmware version it is currently running is 1.0.4 (Jan 3, 2008) and I have been trying to upgrade to 1.0.7. I downloaded the firmware update from the linksys website. I accessed the router via my browser and went to the "Firmware Upgrade" section under Administration. However, the upgrade freezes at 98% every time I try.
I have tried to upgrade the firmware wireless, wired, and wired without internet connectivity and nothing works. Fortunately stopping the upgrade after the freeze at 98% has not had any negative affects on the router as it still works perfectly on the 3 laptops. I even re-downloaded the firmware .bin file before the last attempt and still nothing.The fact that neither desktop will connect wirelessly is baffling, but I don't know what to make of the fact that the firmware update freezes at 98%. I've looked for the intermediary firmware updates to see if I could step my way up to the latest update, but I haven't been able to find them.
View 4 Replies
View Related
Nov 25, 2011
I have a dir 655 coupled with a 320b modem for adsl. Now I must switch to VDSL. Can I use the router with a VDSL Modem? Which modem could be used ? I do not see dlink products ..
View 14 Replies
View Related
Apr 7, 2011
I have a problem with my Cisco 887V VDSL-router. The router gets a ip-address with dhcp from my provider. That works fine. I also can ping from the router:
routerVdslTestNew#ping google.ch source vlan 1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 74.125.79.99, timeout is 2 seconds:
Packet sent with a source address of 10.10.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/48/52 ms
My problem: If I want to ping google from a computer in the VLAN1 the ping doesn't work.
C:UsersXXXXXX>ping 74.125.79.99
Ping wird ausgeführt für 74.125.79.99 mit 32 Bytes Daten:
Timeout.
View 3 Replies
View Related
Jan 2, 2012
I lost all Internet connnecitivity on my Linksys e3000. After determining that my cable modem was connected and working correctly, I pulled the e3000 and put my old wrv54g router in place. Wireless worked, but all wired connections showed link but no other apparent connectivity. Neither of my desktops could get a DHCP lease.
At that point, I purchased and manually installed a new e4200 router. All worked fine. Both laptops connected via wireless and both desktops via my house LAN. Until this morning (Monday). Wireless is working just fine, but both wired computers show 100 Mbs connections on an unknown network with no DHCP. Checking status shows packets going out, but nothing coming in. Checking LAN status on the router shows that both ports are connected, but it does not appear to receive anything from either desktop. All was fine last night. Oh, the router is on 1.0.03 firmware.
I have tried about everything I can think of. Configurations both on the router and the desktops (one Windows XP, 64 bit and one Windows 7) and all seems fine. I have disabled and reenabled the network connectors, rebooted both the router and the computers, etc. Nothing seems to work.
View 5 Replies
View Related
Jan 6, 2012
I have a Linksys WRT120N with two desktops connected via wired connections.In the house, there are two students accessing the Internet through WiFi via the WRT120N.One of the laptops (on an Apple laptop) seems to lose its' connection from time to time.The other laptop (Lenovo) is located the furthest distance from the router and only gets two bars signal strength.Would my best option to improve the signal strength for the Lenovo laptop and hopefully, also increase reliability for the Apple laptop be to purchase a new router such as a Linksys E1500 with speed boost or would it be best to try a Linksys range extender (RE1000)?
View 2 Replies
View Related
Oct 20, 2012
I recently upgraded my DSL service, which required installing a new VDSL modem/wireless router (Actiontec c1000a.) Before the upgrade, I was using an older standalone DSL modem with a Netgear router to provide wireless access to my gaming consoles, laptop, etc. Everything works as before with my new wireless router EXCEPT my son's laptop. All my consoles, iPods, and desktop CAN connect to the wireless network, and the laptop will connect over a WIRED ethernet connection. I cannot get it to connect to the wifi.
[code]....
View 6 Replies
View Related
Nov 10, 2012
I desperately try to set up the X3000 as a router behind a vDSL modem. When I choose connection through Ethernet and then PPPoE, it never keep the credentials after reboot in spite of having saved the data before.
View 6 Replies
View Related
Jan 24, 2013
I have a Dell Aspire 5332 laptop and i haven't used it since November 2012 (where it was working fine).It had Windows updates when i switched it off. I switched it on today and i have no internet connection. When hovering over the icon it says unidentified network - no internet access. My service provider is British Telecom and i am on the Fibre Optic package. I am using the BT Home Hub 2.0.Fibre Type B and also a Echolife HG 612 model FTCC VDSL NTE Router. I have Norton installed on the machine but there is only 1 day left on the subscription. I have tried a wired connection from the router but still have the same message. 2 other computers are wired to the router and all of our Ipads and Macbook connect wirelessly with no problems.
View 19 Replies
View Related
Dec 22, 2011
If I hook up 2 desktop towers together will it give me more hd and ram space? I want to know this because my boyfriend says we can do this to add more space to the existing tower. I have an older computer that I am running World of Warcraft on and I don't think I can add the 2 expansions I need to it because of the hd and ram space it takes up. I have 15.1 gb of hd space left and a total of 1 gb of ram which it is using to run the 2 I have
View 2 Replies
View Related
Sep 2, 2011
Client who owns a school (small pre-school) has 3 desktops that she uses in the office and wants to be able to print to 3 different printers. So each desktop has the ability to print to each of the 3 printers. Her reason for 3 different printers are if one is out of ink I can print to another, or if one just isnt working I can print to another. Would I use a USB switch(assuming they connect via USB)
View 7 Replies
View Related
Jul 7, 2011
I am considering buying wi-fi dongles for my 2 desktops. Is this recommended? Or should I get PCI/ do desktops do better when connected to router by wires?
View 2 Replies
View Related
Dec 14, 2011
How do I create a local network with 12 desktop computers and one printer. then i want the LAN connected to the World wide web. all the computers run a windows xp operating system. Need both the physical set up with less wire view in the room and software set up.
View 4 Replies
View Related
Feb 26, 2013
ok i have two desktops one is conected to the internet using a usb wirreless nicthe other is not i was wondering if i can connect the second to the one with internet through cat5 cableing and share the internet between the two and if so how
View 3 Replies
View Related
Nov 27, 2012
I have a Dell Optiplex 780 running Windows XP and a wireless router model 7500 from Verizon. I recently bought this desktop and want to use my old one so the kids can play games on it. However I can't connect to the internet with the old system. I tried running a USB cable from the wireless modem to the old system to no avail. I tried hooking up a wireless-G Broadband router by Linksys to the wireless router and that didn't work. Does there have to be some wifi hardware/software on these desktops? [code]
View 2 Replies
View Related
