i have all of my music/ films on PC running windows 7 (might upgrade to 8) i would like to be able to browse my collection on a tablet (using it as a remote) and be able to play it through my stereo / tv. i would like this done with as few wires as possible none would be best im guessing i will need some from the pc to the stereo and tv
View 1 RepliesI have suddenlink and my laptop is connected but can not get my tablet to connect.
View 1 Replies View Relatedi have purchased a 2.2 android tablet everything works fine apart from internet access tablet scans finds my sky router tap on connect enter password which i have double checked starts to connect then says disconnected and disabled is this a security issue with the router or conflict with the tablet desktop connects great and also wii.
View 1 Replies View RelatedMy Asus Transforme pad won['t connect to my D-Link router, it just says "Obtaining IP address". It will connect to an an unsecured local router.
View 1 Replies View RelatedI have just bought a new router and am trying to connect it. I did the basic set up with an install disc to the problem is that when I connect to the Wireless network it only gives me limited access to the internet for instance I am able to use Skype and other applications that rely on internet connection, but when it comes to web browsers (both Mozilla & Safari) it shows the url section loading but only ever makes it mid way (the page always stays blank) .
View 4 Replies View RelatedI've tried almost everything but nothing is working for me You see my wireless connection indicates that I am connected with Excellent Strength but when I open any site it doesn't let me and says that the system is offline. I tried MSN and the troubleshoot tells me that Default Gateway is offline
[code]....
Basically, my internet claims to be connected (via wire to router, computer isn't wireless enabled.) but when I open a browser (I normally use Chrome but no browser is working) it came up with the Error 105 no matter what address I try to accessSo far, I have tried resetting my router and waiting, using cmd to reset winsock and resetlog, I've fiddled with some of the proxy settings and immediate downloads Of course, I'm not entirely certain what half of those things have done, but nothing seems to have worked properly. I've uninstalled all of the firewall/anti-virus programs I had installed, which hasn't changed anything either.I have had the 'connected but not connected' issue before since it happens quite often, but usually I disable it, restart the computer and just connect again, then it'll work - but this time it hasn't.
I noticed to have the information given from ipconfig/all, so I've copied out what I get from that below.* I've just noticed that the host name has changed to STACYSC, when it's not supposed to be. I think this is from me attempting to connect to a wireless connection before I realised it wasn't enabled - could this be an issue[CODE]
My flatmates and I recently got Sky broadband - their laptops connect just fine to the internet and they are able to use it without any problems. Mine also connects, but I can't do things like browse or use Skype, etc.When I go into Google Chrome, I'm told there is a DNS error that was unable to be resolved. Mozilla tells me that I have a problem with my server, and IE doesn't work either. Also, I am receiving very few packets. For every 2,000 or so packets that are sent, I only receive 2 or 6. When I click 'repair' I am told that my IP address cannot be renewed. The thing is, the internet works on my netbook at my mother's house, yet it doesn't work in my flat or other places like wifi spots.
I've tried so many things, such as clearing the DNS cache, releasing and renewing IP address, I've set the properties of the wireless connection to obtain DNS and IP automatically, I've tried pinging, I've turned off all my firewalls, I tried system restore, I've fiddled with certain keys in the registry, I even rebooted my entire hard disk last night and it still doesn't work! I'm really at my wit's end with this and I don't know what else to do. The problem is way beyond my comprehension now.
My pc (windows7) will say its connected.. It even says internet access.. But when I click in the Internet?THE WEB PAGE IS NOT AVAILABLE. It says the DNS lookup failed. But the thing is... all my friends bring their laptops over (Mac & Pc) and try work fine. Even my phone catches the wifi perfectly in my house. I started to think maybe it was the laptop but the laptop word great on wifi at my job, my friends house, and pretty much anywhere with wifi but my house. I have wifi through bright house and they came to my house one day but they ended up not doing anything because they can only make sure there device (router) works perfectly. Ok.. So I took the laptop to best buy's geek squad and the guy "reseted my network card" & told me it should e fine when I got home.. Nope. Didn't work. I have spent hours looking trough the Internet trying things that people recommended I do. (start, run, cmd) I've tried it all. It just won't work. I really need this laptop to work at home because I do a lot of work from the pc. I hope somebody on here could point me into the right direction before I give up & toss this laptop in the shed and be forced to purchase a new one.
View 8 Replies View RelatedI have been stuck in a strange problems which happens occasionally--but too often to be ignored.I have a Windows 2003 Server running as a virtual machine via MS Virtual PC 2007. The host machine is a Windows 7 Home Premium 64-bit. This setup used to run fine where I had no issues accessing the guest OS (Win 2003). My development environment is Visual Studio 2005 and 2010 based, both running on the host machine.Some days ago I started working on a ASP .NET application which had a lots of files on the guest OS. That would cause the dreaded 'Network Bios Limit Reached' error in VS. So tweaked a few Registry keys on both host and guest and that problem went away. But then I started to get a new kind of problem: Occasionally, within VS 2010, I could not save files and that would be so bad that the entire guest OS cannot be browsed (but can be seen in the Network Neighborhood and be pinged as well).I have undone all Registry changes in both guest and host but I still see this problem. Only the virtual machine running Win 2003 is occasionally un-browseable but still ping-able by other intranet computers: Win xp, vista, Win 7 but cannot browse until the guest win 2003 is re-started.Is it some kind of network buffer being too full? So far I only see this problem when working inside Visual Studio 2010 but it could be happening elsewhere. The guest win 2003 is assigned a static ip of 192.168.1.7 by the router, btw.
View 8 Replies View RelatedUpgraded my OS from Windows Vista Home Premium to Windows 7 Ultimate. When all was done and over, updates installed and so on I upgraded the Internet Explorer as well from IE 8 (included in the Win 7 install) to IE 9 (I used to have IE 9 before on Vista). A little bit after that I had to uninstall re-install the VPN client for my work and things started going south. Currently after I start the computer the MSN Messenger is not working, the Yahoo messenger is not working, IE, Firefox and Chrome are not working.
IE just hangs, sometimes is displaying [<endif!>] but it seems to find the sites because I can see the icon of the page changinghrome is not able to connect even to google.com but it let's me down nicely (doesn't hog resources like IE does)The Internet connection is fine because I can ping, I can connect to my work's VPN, sometimes even some https pages are briefly working.Once I connect to the VPN everything works great.Now comes the weird part after I connect to the VPN and disconnect, the browsers work, the IM works ... so something gets reset in that process and makes it fine but I have no idea what. (NOTE: IE9 is still barely moving - you request a page go get a snack and maybe it has loaded)
I am using a Dell Latitude E6400 Laptop and have been wirelessly connected to our home internet for several years without any problems. However, of late I have been having problems browsing despite my connection being OK and signal being very good. I am able to still listen to music on spotify, as well as chat on facebook, but cannot load web pages or search for anything on youtube/google etc. I use google chrome but experience the same problem on IE.
I have checked whether it is a problem with malware and have removed all threats, but still the problem persists. the only way I have found of temporarily fixing it is disabling the wireless and reconnecting, whereby it will work perfectly again for anything between 5-50 minutes.I have not changed my router recently so do not think that is the issue. I'm beginning it may just be a hardware fault with the laptop.
I am connected to the internet wirelessly with an "excellent" connection; however, when I open up IE or Firefox I receive an error message that I'm not connected to the web.I've tried everything.. every internet setting.. taking away all the security, etc..
View 1 Replies View Related[code]...
Unable to connect to DNS server/browse internet
since the past week, I have not been able to use my home internet network properly on my laptop. I'm experiencing a really strange issue with it. Whenever I connect my laptop to my home network and try to use the web browser, I get a message from my modem that says that my laptop has been blocked by parental controls and cannot access web browsing. However, this is incorrect, my laptop has full access with parental control restrictions. This only happens when I try to use the web browserWhen I use a third party application such as Windows Mail it works fine.
View 5 Replies View RelatedI have an XPS 400 Computer window xpm os. Cannot browse on the internet:Its says, unable to view webpage. My connections (modeum/router) seems to be working.Had ISP check an everthing checked out.control Panel shows internet connected.
View 14 Replies View RelatedComputer is Win 7, SP1 fully updated.I can browse to most other web site, but cannot go to Google or YouTube - Broadcast Yourself.
Tried a bunch of stuff like flushdns, winsock fix, clearing cache. Nothing works.Cannot ping to Google either.Gives in ip address but times out.Even when typing in the google ip that returns from the ping cmd it will not go to the web site.
I have installed a CISCO v887 router in Amsterdam officeI established a VPN tunnel between AMS office and Edinburg office.
1. The VPN is up and running
2. I am unable to browse anything from LAN computers in Amsterdam office.
3. From LAN computers I can traceroute to yahoo.com but from browser I cant browse yahoo.com and web page hanged out in this situation (website found waiting for reply). But nothing comes over and LAN users are unable to use internet.
[code]...
I have Aironet 1240AG and the 2 laptops connected to same SSID. Unable to can ping each other but can ping/browse server on wired.
Below are my config:
Current configuration : 2646 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname AP2!enable secret 5 $1$7EVQ$2FN7ewjcrwKCICIfmFgCO.!no
[Code].....
I really worked hard not to write this question here but here I am. I am trying to route all traffic through vpn but I cant browse the web. It seems no traffic goes through the vpn tunnel. Split tunneling works but it doesnt route the traffic through vpn tunnel. I have a cisco asa5505 with base license,
When I try to browse the web with one of the clients I see lots of
6Apr 07 201309:40:5510.10.50.136088410.10.10.153Built inbound UDP connection 834 for outside:10.10.50.13/60884 (10.10.50.13/60884) to outside:10.10.10.1/53 (10.10.10.1/53) (xxxx
messages but at the end I see " Safari could not open the page because the server stopped responding" message or smth similar.
My setup is
Vpn Clients ====== asa5505 ========== CiscoLinksysEA4500 Router ======== ISPProvidedFiberConverterDevice(huawei)
10.10.30.10-10.10.30.50 10.10.10.2(outside int) 10.10.10.1(inside) PPOE(outside)
[Code].....
I am facing a problem that I can not browse the websites (or receive POP emails, but I can send emails) via the DSL router CISCO1941/K9, the DHCP is configured at the Switch (not on this router) and actually the PCs are able to do a ping for the hosts (like [URL] and so on) but they can not browse !!
Below is my DSL router configuration if u would to give a look
Router#show running-configBuilding configuration...
Current configuration : 3434 bytes!! Last configuration change at 19:26:41 UTC Sat Dec 3 2011 by bilal!version 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname
[Code]......
After launching config collection job in LMS 4.2 I can't get job results and receive error message - Unable to get results of job execution for device. I've increased the job result wait time using option in Admin > Collection Settings ... , but nothing changed.Here are screenshots of error message and wait settings I used.
View 3 Replies View RelatedOur customer is try to make a configuration by web interface menu:
Admin > Collection Settings > Inventory
After select the menu below they always received this message:
Error in starting acquisition: unable to connect to server
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen".Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
View 9 Replies View RelatedAfter I upgrading all device packages, inventory collection failure to complete. All devices stuck on pending state and at the end of the job all devices are under not attempted and job result description ses " Timed out. Make shure that ICServer is running". I made sure that ICServer is running.
LMS runs on windows 2008 R2 server
I have Cisco Works LMS 4.0 on Win 2K8 64 bits on VMware EXs. I am facing issue with reference to Inventory Collection, my 10% devices (including Routers & Switches) Inventory collection is failed and give me error (Device sensed, but collection failed). I increase the SNMP timeout 10 sec, 30 sec, 60 sec and even 100 sec the result be the same.
View 1 Replies View RelatedI have a problem with the User Tracking and Data Collection on LMS 4.0.1 . I think It crashes every time or freezes. I Have this error if I lunch UT Acquisition :
Failed to start acquisition: Construction of XML data required for UT IS in progress. Please try After Some Time.When scheduling a CM data collection, I have this error: Data collection IS Already in progress.
I detected an error in ani.log line 12266: Exception in thread "Discovery" java.lang.AbstractMethodError: com. cisco. nm. ani. server. topo. Port Channel.portIfIndex ()
I successfully changed the name of the CiscoWorks server last week with the tool hostnamechange.pl.
Perhaps there was an impact on data collection ?
A customer of mine have 2 VSS systems for wich IC times out during collection when trying to read from flash on them. From the ICserver.log
[ Thu Dec 13 16:45:19 CET 2012 ],WARN ,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,67,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.FlashAGI_CISCO_FLASH_Mib,g$eval,70,com.cisco.nm.xms.xdi.pkgs.S
[Code].....
I'm having an issue with LMS 4 where it's failing to collection configuration from devices.
The following is the status of your Scheduled Config collection job:
Job ID : 1045
Status : Job Failed(111)
Description : System config collection job
[Code]....
I researched through this forum and found a thread where the ConfigMgmtServer server wouldn't run. Looking at the processes it says that this service is running normally.
LMS 4.0.1 installed on Windows Server 2008 R2 Standard with SP1. Created Inventory collection job, but couple of hours later, it is failed with all devices Not Attempted. Increased SNMP timeout on 10 sec, started again for only 1 device - collection failed again. I am attaching pdshow and ICServer file.
View 6 Replies View Relatedwe have installed LMS 3.2 when i try to run data collection it shows "Notified server to run campus data collection", but status of data collection is idle.
If i restart the server and try to run data collection it runs properly one time.
Each time i have to restart the server for data collection.
We have LMS4.0 monitoring 100+ devices. In that collection we have 2 4506e switches. The switches are identical,but one is inventoried successfully and the other always fails.Both have verified their credentials. The 4506e failing inventory is the only device not being inventoried.I looked at other post and increased snmp timeout with no effect.
View 1 Replies View RelatedDoes two separate SCE 2000 devices can share a collection manager, or do they each need a separate CM? If they can share, is there any special setup on the CM itself?
View 0 Replies View Related