How To Set Up Second Router With 2wire Gateway
Apr 18, 2011How can I get my router to stay at one ip so I can set it as the DMZ server?
View 1 Replies
ADVERTISEMENT
Connect Iphone To Att Router / Gateway 2wire Wifi?
Nov 6, 2011How do I connect my Iphone to my ATT router, Gateway 2 WIRE WIFI?
View 1 Replies View RelatedInstall 2wire Gateway Behind Linksys Wireless Router?
Oct 30, 2011I currently have Comcast as my ISP.However there are only 4 wired ports on the router and I need an additional 2 ports for my needs. I have a 2wire 38000HGV-B Uverse Wireless gateway. I wanted to know if I could use one of the output ports from the Comcast wireless gateway and feed the 2wire Gateway to achieve the additional ports that I need. Also the wireless router from comcast is so difficult to setup that I don't even use the wireless. The 2wire gateway is much easier to setup and use and I could have wireless available where I don't have it right now.
View 2 Replies View RelatedGateway 2wire 3800 HGV-B Router - Wireless Working Properly But Wired Isn't?
Jul 22, 2012I've got a Gateway 2wire 3800 HGV-B router which works fine wirelessly, but when using an ethernet cable to connect to the internet, it doesn't even recognize the computer. My laptop runs wirelessly all the time, and I recently picked up a desktop PC for home here, and it's the first wired connection I'm using, but for some reason the wired connection isn't connecting to my network, but instead it's own Unidentified Network.
View 2 Replies View RelatedCannot Connect Toshiba DX1215-S21 With 2wire Gateway
Oct 15, 2011I cannot connect my Toshiba DX1215-S21 with my 2wire gateway. There are 7 devises that are connected and on wifi.
View 1 Replies View Related2WIRE 2701HGV-E No Default Gateway Or Connection To Internet?
Oct 4, 2011im having a problem with my 2701hgv -e. I connected it to my laptop and I tried to enter the settings of the router but was unable to do so. but when I ran the ipconfig command, there was no default gateway. I tried to press the reset button but nothing happened.
View 4 Replies View RelatedNetgear 7550 B90 - Upgrade Gateway From 2wire Wireless G?
Oct 2, 2012I have at&t DSL.I NEEDED to upgrade my wireless gateway from the 2wire wireless-G gate way that I had.I also have a Netgear WNDR-4000 750N Wireless Dual Band Router.
I know I needed an at&t modem to run my DSL, so I purchased (before reading reviews) a Netgear 7550 Wireless Gateway from at&t (they did not have any "N" single user modems (if there is such a thing).I have read through other posts that it is possible to connect the two and I would not need the 7550 for anything else but a modem (disabling broadcast).
The question is ... do I REALY need to do all this or can I just get away with the 7550?Or will the Netgear WNDR-4000 750N Wireless Dual Band Router, if installed and used, fix some of the issues that other 7550 users have said in other posts?
Wireless ... I have 3 gaming systems, two PC's, a tablet and 4 smartphones.I will be using 3 wired ports ... 1 gaming system, PC, and a blue-ray.
And yes, my 2wire wireless-g gateway ran all these ... not efficiently or reliably, but they all did run.
I have not received the Netgear 7550 yet, just trying to get some opinions on which setup would be better.
Where To Find Wep For 2wire Router
Aug 3, 2011where do I find wep # for 2wire router
View 5 Replies View RelatedPs3 Not Working With 2wire Wifi Router?
May 19, 2012The other day, I decided to set up a wifi router. Once I'd set it up, I connected my other devices to it, (laptop, iPad, iPod, etc.) but when I tried to connect my PS3 to it, the connection just timed out when it was testing the connection. I've tried it a few times - I thought maybe I'd typed in my WPA key wrong, to no avail.
View 1 Replies View Related2wire 2701hg-d As Wireless Router
Jan 22, 2012My linksys wireless router bit the dust, trying to resurrect this old modem for use as a wireless router only. I've got the 2wire 2701hg-d connected to my isp's cable modem and to my laptop via two of the LAN ports. the lac connection gives me internet access (obviously...here i am...) but the wireless connection gives me no internet access...i can log in to the 2wire's firmware via the wireless connection...but i' m not sure what settings (if needed) i have to change.
View 1 Replies View RelatedTo Block Devices On 2wire Router 2700HGV
May 2, 2011Noticed several devices have connected through my home network previously. Not sure how it is done,currently these inactive devices are displayed, i would like to know how can i block them from the firewall just in case it is connecting again?
View 3 Replies View Related2Wire 2701HG-B Router / Can't Connect To Internet
Oct 4, 2012I can't connect wirelessly or hardwired. My internet provider is AT&T DSL. My router is a 2Wire 2701HG-B and my antivirus and firewall is McAfee. Attached are the ipconfig/all and Xirrus Wifi.
View 16 Replies View RelatedWhat Bridge Will Work With The AT&T 2wire 3600HGV Router
May 29, 2012I need to increase range on recently installed 2Wire 3600HGV ATT U-Verse DSL Modem WIFI Router. The signal is weak (1 bar) in my back bedrooms of my home (+/-50 feet from my desktop & 3600 HGV router).
AT&T Tech support worked with me to boost signal of 3600HGV but still weak signal. They did not know about repeater/bridge that would with (compatible) with the 3600HGV router.
I used to have the D-Link DIR-655 wireless router as my wireless home network set-up.
Use 2wire DSL Router / Modem With Cable Internet?
Nov 27, 2011I have cable internet can I use 2wire DSL router/modem with cable internet? I need to do wireless in my house?
View 1 Replies View RelatedGet The Router To Use Existing 2Wire 2701HG Modem?
Mar 1, 2013I purchaseda trendnet 692 GR router because I understood that I would be able to stream from let's say my computer to my TV that is up the stairs. Here is the problem. I did get the router to use my existing 2Wire 2701HG modem.Yes I can connect my Samsung 6100 to the wireless 2Wire but I thought the trendnet setup would work the best.I and Trendnet support set up my router and media bridge and the two do work but my tv won't work through the MB. I have connected to the network but the next part of the connection (the internet) won't connect. I have tried different IP settings that I thought would connect but nothing so far has worked.Also I have taken a 50' ethernet cablefrom the trendnet router to the tv and I do get a connection.I have also taken a laptop through the media bridge and connected to the trendnet router.The customer service at trendnet can't take this to the next level(which is a$40 one session professional service)
View 19 Replies View RelatedZyxel 3205 Won't Connect To 2Wire Router?
Aug 11, 2011I purchased a ZyXEL 3205 to serve as a universal repeater in my house, to boost the DSL wireless signal from upstairs to downstairs. I have a 2WIRE router, and my DSL is through AT&T. The wireless works just fine (and we've been connecting multiple devices through it for over a month), but the signal is weak downstairs, so this seemed like a good cheap solution.I found several good sets of instructions on setting up the 3205 as a repeater, so while complex, that was not really a problem.
However, the 3205's status is still marked as "disassociated", which means that it won't connect to the 2WIRE. It can see the signal, and I'm telling it to connect and giving it the correct key. It also broadcasts just fine, since my wireless devices can connect to the 3205 when it is turned on. However, the 3205 refuses to actually connect to the 2WIRE for some reason. Is there a known issue with connecting? I've checked all the obvious things - they're set to be on the same wireless channel, both using the same encryption settings, and there aren't any ip conflicts happening, since the 3205 is set to an unclaimed ip in the same space.
How To Configure 2wire 2701hg-d To Use It As Wireless Router Only
Jan 13, 2011I am switching from Qwest to another ISP that has provided me with a modem that is not set up with an internal wireless router. I've been told that I can configure the 2wire 270hg-d to use it as a wireless router that can then be connected to the ISP modem. Need proper configuration settings on the 2wire..
View 4 Replies View Related2wire 2700hg-d Router / Block Or Monitor Porn Viewing Activity Of Users Through The Router?
Jan 19, 2013I have a 2wire 2700hg-d (Qwest/Centurylink) router serving 3 or 4 computers. Is there a way I can either block or monitor porn viewing activity of users through the router?
View 2 Replies View RelatedWireless :: Connect 2wire And D-link Router Wirelessly?
Sep 7, 2012I have a network that starts with a Linksys wireless router (DSL connected here) then it goes to a Netgear switch (computers connected here) and then a Netgear wireless router for an iMAC to connect to. I can't see the last router or the iMAC on my Win 7 machine? when I map network I get an error message about an incompatible device.
View 1 Replies View RelatedConnecting Netgear N300 To 2wire 2701 Router?
Mar 8, 2011How do you connect two routers together to increase signal through the whole house? I am trying to use the n300 as my main router (its hooked to cable modem) and use the 2wire as an access point.The two are connected by a known good ethernet cable.
View 2 Replies View RelatedLinksys Wired Router :: RV082 Gateway To Gateway VPN Not Connecting?
Jan 24, 2012I recently swapped out an RV082 with a newer model (still RV082 but black and a different interface). I configured the Gateway to Gateway VPN exactly as it was before but none of the three other RV082's will connect. I have tried deleting the connections several times to no avail. I have aggressive mode disabled and have tried with the firewall on and off. Below are the settings (IP's have been X'd out) and the log.
Settings:
IP OnlyIP Address : X0X.X0X.20.31Local Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : Remote Group Setup
Remote Security Gateway Type : IP OnlyIP AddressIP by DNS Resolved : Remote Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : AES-192AES-256AES-128 AES-192AES-256 AES-128 IPSec Setup3DES Keying Mode : ManualIKE with Preshared keyPhase 1 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 1 Encryption : DES Phase 1 Authentication : MD5SHA1Phase 1 SA Life Time : secondsPerfect Forward Secrecy : Phase 2 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 2 Encryption : NULLDES3DES Phase 2 Authentication : NULLMD5SHA1Phase 2 SA Life Time : secondsPreshared Key : Minimum Preshared Key Complexity : EnableLOG:
[code].....
Linksys Wired Router :: VPN Gateway To Gateway With Two RV042 Constantly
Jul 11, 2012My two RV042 , one at home and the other one at my working site, constantly lost VPN connection after successfully connected.Both Firmware are identical. [code]
View 1 Replies View RelatedLinksys Wired Router :: RV042 Gateway To Gateway Connection?
Feb 8, 2011we do have 2 Rv042, one in my office and one in my house.. in the office we do have static ip and at home none.. question is can i connect the two RV042?
View 1 Replies View RelatedLinksys Wired Router :: RV042 - Gateway To Gateway VPN Connection
Mar 22, 2011I have some problems in my network with Gateway to Gateway Vpn Connection using two Rv042 routers.
I cannot ping the computers with static ip configuration.
In local an remote computers who have DHCP ip configuration i can ping each other .
Linksys Wired Router :: RV082 Gateway 2 Gateway VPN Can't Ping
Jul 26, 2012We have a VPN setup between two Cisco RV082 routers, the VPN status shows as connected however I can't ping the other network. I am unable to ping between routers, let alone ping computers behind those routers.
We have 2 branches, branch 1 is on a static IP and branch 2 is Dynamic. I am able to connect via QuickVPN from Branch 2 to Branch 1 and remote desktop to computers, however have yet to VPN/remote desktop in the opposite direction.
To me it seems like a firewall issue at branch 2, but what's causing this. Also they are currently running 2 differnet firmware version not sure if this would cause a problem.
Linksys Wired Router :: RV042 / Setup A Vpn Gateway To Gateway
Apr 6, 2013i am trying to setup a vpn Gateway To Gateway when i setup the vpn i can ping the 2 rv042 i cant see any computer in the network places when there comect we need to see the computer in the network places so are pos will run?
View 1 Replies View RelatedTrying To Bridge 2wire 2701hg-b To Netgear Router / No Internet Connection
Jun 15, 2011Everyone's 2wire works in bridge mode of they follow these steps url...but when i try i get no internet connection nor does it pick up any internet activity. I even input my account and dsl password in the netgear router gateway still no luck.I'm trying to use the netgear router because in my room i only get 2 signals bars and if i switch to the netgear wireless N router the signal strength would be alot better.
View 7 Replies View RelatedLinksys Wired Router :: RV0XX Gateway To Gateway VPN?
Mar 6, 2011I have an RV082 and a RV042. I have been able to successfully establish a gateway to gateway vpn connection between them both, and I can remotely administer each router through the VPN connection, but I am unable to ping computers from one side of the connection to the other. For example, a computer in the 10.10.1.0 subnet can't see / ping / communicate with a computer in the 192.168.1.0 subnet.
Below are the configurations for each. Aside from the static IP configurations and the VPN configurations, no other changes were made to the routers. RV082 DHCP Enabled Tunnel Status: Connected Local Group Setup
IP Only: X.X.X.66Local Security Group Type: SubnetIP Address: 10.10.1.0Subnet Mask: 255.255.255.0Remote Group Setup
Reconnect Cisco Wireless Router With 2wire Modem After Password Change?
Feb 8, 2011I have a 2wire Modem connected to a Cisco Wireless N Router, that is connected to another Cisco Wireless N Router. All was working well. In my absence sbc (AT&T) changed the pass word of the 2wire Modem. The 2wire has stoped communication with the Cisco Wireless N Routers. I connected am Ethernet wire to one of the ports of the 2wire, and connected it to the 2nd Cisco Wireless N Router. The signal gets to the 2nd Cisco Router. However, when I attempt to access the Internet on the CPU connected to the 2 Cisco Router, I get an error Message saying that there is a problem with the Modem and/or Router. On the available Networks selection screen I can see the connections that I want. The selection info shows connected. But when I try to connect, the I can't.
View 3 Replies View Related2wire 2701HG-B Wireless Router / Dsl Modem Combo / Can't Renew IP Address
May 13, 2011I'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.
Here is the ipconfig /all print:
Windows IP Configuration
Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.
Routers / Switches :: Convert 2Wire Router 38000HGV-b As Wireless Access Point?
Jan 11, 2013I just switched over from AT&T Uverse to time Warner cable for Internet. I bought a Motorola Surfboard sbg6580. I have the surfboard hooked up and all is well. Now I would like to do in put the old 2wire from AT&T in a room upstairs and use it as place I can plug in the Ethernet cords and also transmit another signal. I have what's a called plug link that is plugged in down stairs and then another upstairs and it allows the Internet signal to run through the power lines. So it just about the equivalent of running a cord for down stairs to upstairs. So basically I just need to plug more then 1 thing upstairs that isn't wireless and I would also like to transmit a 2.4ghz signal upstairs and use my Motorola to transmit a 5ghz.How would I set up the 2wire to do this.
View 3 Replies View RelatedCisco :: OSPF - Router As A Gateway And Has An Own Gateway?
Jan 29, 2013Can a router using OSPF propagate that he is a router with default-information originate... at the same time when he got an own gateway of last resort to an IP-adress? If so, how? I can't get it to work.
View 8 Replies View RelatedWay To Use Two 2wire Routers
Apr 24, 2012I have ATT uverse and they gave me a router 3600HGV (2Wire). The router went into the communication box of the house from where it connects to various ethernet ports in various rooms of the house.
The connections work, but they are slow and sometimes do not even work. My guess is that there is IP conflict between the two routers. I am not even able to go to the 192.168.1.254 router config.