Linksys Wireless Router :: Can Install E3000 Without Removing Older Router First

Dec 1, 2012

My son gave me an E3000wireless router but the first instruction is to insert the CD and follow instructions.  I don't have the CD.  How do I install it?  Also, this is replacing an older router that is installed and working.  Can I install the E3000 without removing the older router first?

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: Way To Install E3000

May 9, 2012

install linksys e3000.

View 1 Replies View Related

Linksys Wireless Router :: Need Older Firmware For WRT54G V6 Router

Aug 20, 2011

I was  using dd-wrt to fix a problem that my router was having (I wasn't able host some online games when router QOS is enabled).  However, i can't couldn't take that crappy firmware anymore (its web gui was way to slow, painfully slow actually and it crashed alot) and will never use it again in life.  I was finally able to get back to the default linksys firmware but now I have the same previous problem.  I am now using the latest firmware "Firmware Version v1.02.8' for my WRT54g v6.  I never backed up up the previous firmware for this router before i upgraded to v1.02.8 so any link to a previous version or the first version of firmware for this router that will be great.  I've been look all around the internet and I can't find it, from searching around i found out that linksys hand an ftp archive of firmwares but it stopped working around 2010.   So, where i can get at older version, or even a third party firmware OTHER THAN DD-WRT that works with the WRT54g v6 router.
 
I don't even know if the older firmware would fix this problem, but I dont want to have to be disabling QOS every time i want to play this game because the people in my house will hog the bandwidth and i will get lag, but its worth a shot.

View 2 Replies View Related

Linksys Wireless Router :: BEFSR41 Removing 2nd Router From Home Network

Nov 12, 2011

My home computer accesses the Internet through an ADSL modem and a phone line. I added a wired router (Linksys BEFSR41).I've since bought a laptop computer, an iPhone4 and a wireless router (Linksys WRT160N).Again, on the advice of a friend, I ADDED the wireless router, so now have two routers connected.The devices are connected as follows:

-Wall jack to ADSL modem
-ADSL modem to BEFSR41
-BEFSR41 to WRT160N
-WRT160N to desktop computer.
 
As I understand Linksys routers, the default IP address for ALL Linksys routers is 192.168.1.1.Both the iPhone4 and the laptop are unable to connect to the wireless router.I'm assuming the two routers are conflicting with each other, so I thought I would remove the wired router..Can I change the IP address of the BEFSR41 router from 192.168.1.2?

Would this resolve the conflict between the two routers and allow the wireless devices to "see" the wireless router? What's the correct procedure for removing the BEFSR41 router from the system?

View 6 Replies View Related

Linksys Wireless Router :: E1000 - Removing Password Requirement For Guest?

Mar 17, 2012

The Cisco E1000 I just purchased provides two connections:  a main connection, and one for "guest access."  I've successfully disabled the need for password on the main, but the guest access still requires that I assign a password.  How do I make this connection open and accessible as well?

View 4 Replies View Related

Linksys Wireless Router :: E3000 Can Determine What Devices Are Connecting Directly To Router

Aug 15, 2011

I I use a Linksys E3000 router.  Sometimes when I look at the network map I see a device called "Unknown."  It appears as though the two notebooks sometime are going through this device to access the Linksys E3000.  (I've checked when both notebooks are on and I can determine what devices are connecting directly to the router and what devices are going through this unknown device.)  Is there any way to determine what this unknown device is?

View 5 Replies View Related

Linksys Wireless Router :: E3000 Internet Connection Is Frontier Modem / Router

Dec 12, 2011

My main Internet connection is a frontier modem /router It is on the main level of the house. In the basement I am trying to set up the cisco E3000 through an Ethernet cable.

View 4 Replies View Related

Linksys Wireless Router :: E3000 - Can't Connect To Router Settings Page

Dec 25, 2012

When I try to go to192.168.1.1 it says connection interrupted.  If i use the Cisco Connect it tells me i am not connected to the internet.  My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly.  I can go online, I just cant get to the router.  

View 9 Replies View Related

Linksys Wireless Router :: E3000 Do Not Handshake With Border Router

Feb 19, 2011

I recently purchases new E3000. I setup the E3000 with static IP from border router rather DCHP which seemed to default to the same IP address and DNS. The laptops tied to the E3000 have their own IP's that are different from the IP of the border router. E3000 is configured with no firewall an minimal protection, for now. The reason for minimal protection was to get the handshaking to work between the two routers. The border router is a Verizon product. The old router that I was using is a Netgear that did handshake with the border router. I have the latest firmware for the E3000 namely Firmware version: 1.0.04 build 6. Router will not handshake either with wired or wireless connections. Laptop used to connect to the E3000 is running Windows 7 Ultimate.  In fact all laptops here are using the same OS and connect using wireless. I tried the included software package from the website, which housed a diagnostic that apparently couldn't fix the problem as well. I don't have clue as to the reason for E3000 not to handshake with the border router.

View 3 Replies View Related

Linksys Wireless Router :: E3000 - ISO Router That Supports SNMP

Dec 2, 2012

Which routers support SNMP? I need to track usage coming through our network/router. Our internet co claims we are using at least double what our computer tracking software says. We currently have the E3000.  

View 5 Replies View Related

Linksys Wireless Router :: WRT54GS - Connect Broadband Router To New Win Xp Install

Jan 17, 2012

I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
 
The last instruction on the Easylink advisor tells me to look for something marked "local"  I don't  find that word on the screen.

View 2 Replies View Related

Linksys Wireless Router :: E3000 FTP Not Seen On The WAN

Apr 22, 2012

I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
  
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
 
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
 
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?

View 2 Replies View Related

Linksys Wireless Router :: How To Get Most Out Of E3000

Jun 29, 2011

I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.

View 9 Replies View Related

Linksys Wireless Router :: E3000 No Address From ISP On WAN?

Apr 2, 2012

I have an e3000 that cannot obtain an address from the ISP.  I can get an address on the computer and an old router by directly connecting the cable to the computer or the router.  I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router.  I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work.  It worked fine on Saturday until a bolt of lightning hit close to the house.  Since then, I cannot get the e3000 to connect to the ISP.  

View 9 Replies View Related

Linksys Wireless Router :: Set Up E3000 For ATT U-verse?

Jul 11, 2011

How do you set up the E3000 for ATT u-verse?

View 2 Replies View Related

Linksys Wireless Router :: Restore Ver.1.0.04 On E3000?

Oct 26, 2012

I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Override Only DNS From ISP

Nov 3, 2012

I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?

View 3 Replies View Related

Linksys Wireless Router :: E3000 Gets Slow After A While

Feb 17, 2011

It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow.  And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes).  But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.

View 8 Replies View Related

Linksys Wireless Router :: E3000 Cannot Keep Signal

Aug 21, 2011

We have  a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works  , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..

View 5 Replies View Related

Linksys Wireless Router :: Testing QoS On New E3000

Apr 19, 2010

Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application. 
 
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net).  As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.  

View 9 Replies View Related

Linksys Wireless Router :: Use Internet With E3000?

May 18, 2011

just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?

View 6 Replies View Related

Linksys Wireless Router :: Lost Cd For E3000?

Aug 17, 2012

I lost my cd for my router e3000 any way still to use it?

View 1 Replies View Related

Linksys Wireless Router :: E3000 - Wi-Fi Not Working

Oct 20, 2010

I just bought an E3000 about 30 hours ago and just unrealistically my router now doesn't want to give me any WiFi at all. I tried reset button, tried re plugin all of my system as well as pressing for short and long period the middle button that indicates WiFi is accessible. I already bought 3 linksys routers.

View 2 Replies View Related

Linksys Wireless Router :: E3000 - How To Get It Working

Aug 25, 2011

Looking at upgrading my router to an e3000 however I've got a couple of questions. I might come across as a bit thick with this one but I have read that you need a modem to make the router work, I can't get my head around this as I've not come across this before. I always thought the router was the modem!! I've also heard that the E3000 only works with cable ISP and not ADSL, is that true?

View 2 Replies View Related

Linksys E3000 Wireless-N Router Slow Speed?

Feb 25, 2011

I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.

1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?

2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?

View 2 Replies View Related

Linksys Wireless Router :: Upgrade From WRT52G To E3000?

Jun 5, 2012

Want to switch to dualband E3000 from older, working fine except needs resetting often.  What steps do I need to take?  I do not have E3000 setup disk.  I fear that I will go down a path that makes both of the routers unusable, at least down many hours.

View 9 Replies View Related

Linksys Wireless Router :: How To Use E3000 Dhcp Through Wifi

Aug 22, 2011

I've been searching how to make my E3000 use the DHCP and IP address on my primary router so I can share printers and computers on same gateway IP. I tried turning off DHCP on E3000, but not sure how to tell it to use the DHCP from the source "INTERNET"

View 1 Replies View Related

Linksys Wireless Router :: E3000 Will Not Connect To Internet?

Aug 30, 2011

shows connection to cable modem, shows IP lease, able to renew and release lease. shows all DCHP clients, but does not allow internet to get through. tried cloning old routers MAC, no dice.

View 6 Replies View Related

Linksys Wireless Router :: Finding Password On E3000?

Nov 5, 2011

A retailer (Best Buy's Geek Squad) made adjustments to my Linksys E3000 router when I bought a Sony Media Player from them a number of months ago. It was the first wireless device integrated into my wired LAN network (three computers).
 
In attempting to set up a GUEST connection, I pulled up Cisco Connect which I originally used to set up my network. The BB Geek didn't use a key and followed a different procedure unknown to me.
 
As I face the Cisco Connect screen now, it tells me "Can't access your router settings. The router password has been changed." Then in the "Router password" block, it gives the original password I assigned.
 
I had written another name I thought was associated with the changes made by the BB Geek so I copied the password there now, inserted the new PW, and clicked Next. I was then asked if I wanted to proceed with the change ... but the change it was proposing was the exact PW I just copied. Confused, I cancelled the operation.

View 8 Replies View Related

Linksys Wireless Router :: Get Line Stats With E3000?

Mar 4, 2012

I am using a E3000 router with a Draytek V120 modem and I need to get some line stats for my ISP to sort out a problem however I cant see how to get stats out of the E3000, simple but having been through all the settings in the web interface I cant find it.

View 1 Replies View Related

Linksys Wireless Router :: E3000 Slows Down With IPads

Jul 23, 2011

Ever since I started using iPads at the house I have had to reboot the router about once a week because the download speeds drops by approximately 90%.  As soon as the reboot completes all is right with the world for about another week.  During the course of the week, but not all at once, we will have 4 iPads, 3 iPhones, 2 laptops and one desktop(wired), a Verizon signal booster and house guests.  I have updated the firmware. 

View 1 Replies View Related

Linksys Wireless Router :: E3000 - Specifications On Range?

Apr 10, 2010

Any spec on the range of this router.  I bought it last night to replace my existing Linksys WRT300N and it appears it does not even come close to matching the WRT300N's signal range.  In fact, the new E3000 barely covers 1/2 the area my 300N did.
 
Network mode: Mixed
Channel Width: Auto (20Mhz or 40Mhz)
Channels: Auto DFS
 
I have the E3000 in the middle basement (same location at 300N) and i barely get a signal 1 floor above and 25 feet away.  In fact, I get no signal in my kitchen.

View 9 Replies View Related

Linksys Wireless Router :: Connecting E3000 To DIRECTV DVR?

Sep 12, 2011

I want to setup a hardwired connection between my Linksys E3000 router and a DIRECTV DVR.  I have the most recent firmware on my router.  I have checked the ethernet cable and it is good.  The lights on the ethernet port on the DVR light up when I have the DRV and router connecter.  The DVR gives me an error message when I try to connect.  Some other posts have suggest setting a static IP on the DIRECTV DVR using the following settings:
 
IP Address : 192.168.1.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 192.168.1.1

I tried this and still get an error message so I am going to call DIRECTV.  Before I do call I would like to know if these are the correct settings for a Static IP?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved