Wireless :: Wifi Router Password Is Not Working In E63?
Nov 29, 2011i have set mywifi router but when i put the same password in my nokia E63 it says invalid for wpa?
View 1 Repliesi have set mywifi router but when i put the same password in my nokia E63 it says invalid for wpa?
View 1 Repliesmy password isn't working for wireless router hookup.
View 1 Replies View RelatedI have a Lynksys WRT54G wireless router. It works just fine until I try to put a password on it. I go through the basic steps, it talkes all my information and tells me everything is good. I try to sign on the internet and it tells me my password is invalid....and YES Im sure its the right password I entered. I went to http://192.168.1.1/wireless.htm and did all the necessary instructions, and still, it doesn't work. I can change my network name and it works. As long as I leave it unprotected, everything works fine, but when I add the password, it tells me its invalid. I even used 123456 so as to make sure it was the right one.
View 5 Replies View RelatedI have a Linksys WRT320N wireless router at my salon with an Ethernet connection to my POS terminal, and wireless access for my notebook. When it was originally set up (by a technical person), I used a password that is my own personal (private) password. Since then, when my clients have asked to use the wireless network, I have had to enter my password into their device since I can't tell them what it is.
Today I decided to resolve the issue, so I changed the password to something simple. But, now the password only seems to work for me and not anyone else.
I don't understand why this is happening, when my previous password worked fine on other devices.
I hesitate to keep messing with it since I am not a very technical person. For example, just changing the password today and resetting the router, etc, was a challenge and I about had a heart attack when my POS terminal wasn't responding (luckily I got some assistance from my Internet provider, even though its not their router).
I do not have Cisco Connect installed on my Notebook at work (did not have a CD drive at the time). I do have a CD drive now and can install Cisco Connect if necessary. (Again, a bit of concern that I will screw something up in the process and not have POS access.)
I used Cisco connect to set up guest access with a secure password. Cisco Connect now indicates guess access is allowed and shows the password. However, when I actually try to connect to the guest network, it shows no security at all, and I can join the network without a password.
View 1 Replies View RelatedI have a CANYON Wireless N Router CNP-WF514N1A. It was working properly, but I changed its deafult password to my own . (192.168.0.1 -> wireless security -> new pass -> okay -> reboot computer ). After I restarted the computer, the router stopped working. The lights on it are fine, and if I plug the net cable into the computer I have internet too. The problem is, if I plug the cable into the router, I don't have internet. And I can't open 192.168.0.1 either.
View 1 Replies View Relatedhow to change the password for my wifi.
View 1 Replies View Relatedchange password of my wifi modem.model cisco linksys: WRT160nVv3.
View 6 Replies View RelatedI have Beetel 450TC1 Wifi router (3 yrs old) and configured with BSNL broadband. The DSL light goes in stable state whenever I took the phone in dialing mode. And internet working well at that time. When I put my phone down, again goes off!
View 1 Replies View RelatedWe got a lynksys model at our home. it seems that everything is working the pc's connected with cables are working with internet. The wifi sends out and you can get on it. But internet isn't working with wifi also if it says connected etc.
View 1 Replies View RelatedI am having a trouble with my router, our modem is the one that is connected to a TV box and it comes with a wifi function(a modem with a wifi function). I am not sure how to set it up, so I connected it to E4200 which is located in another room using CAT6 flat cable and set it to "Bridge mode". But whenever I open the TV box, the wifi won't work, and when it's closed, it works. :s how weird is that. Are there any problems? The modem with wifi will always work either way I open/close the TV box, but the E4200 wifi will only work when I close the TV box. I asked my service provider about this and they tell me it's not their problem anymore.
View 2 Replies View Relatedi have a Linksys modem BEFSR81 v.3 and am trying to reset my wifi password for secure connection. When i log into the the admin page, to my surprise, I could not find the security feature to create WPA or WEP password. i'm stumped. This has never occurred to me before on this modem.
View 6 Replies View RelatedI have 3 computers, all Macs. Two are hooked into my WRT54GP2 via ethernet cables, and one is using WiFi (Airport Extreme). All get an IP number from the router via DCHP (no hard numbers). The router is also hooked up to a Motorola Surfboard cable modem.The two Macs using ethernet have no problems at all, and can access the internet and share files and printers. The WiFi Mac, however, can access the Internet fine, but cannot mount the other machines as file servers. It doesn't even ping them. What is going on in the setup of the router that is preventing the ethernet machines from being seen properly by the WiFi Mac?
View 6 Replies View RelatedI am in the process of moving in my new house and the landlord set up a Belkin router and gave us the password. I connected to the wifi with no problems on my iphone, but when I try to connect from my PC is says the security key is invalid. I hooked up directly to the router, went to the IP and tried logging in with the password to no avail. I don't get what the problem is? The password works fine from my phone, but not from the computer.
View 10 Replies View RelatedI've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
I have a E4200 updated to the latest firmware I have problems with the wifi on the 2.4GHz band, in fact, at power on, many times wi-fi on the 2.4GHz band doesn't work but the 5GHz band works normally. After some reboots the wi-fi operating normally on both bands.
View 9 Replies View RelatedI've lost wifi router password. how can i find it?
View 1 Replies View RelatedHow to put password on my router wifi
View 3 Replies View Relatedneed passwords for netgear 1 wifi . free
View 2 Replies View RelatedI have installed a new ASUS PCE-N13 network adapter. My problem is this: The network adapter easily detects my wireless router (full strength) so I click connect and it asks me for my p/w. I type the p/w in and my computer instantly tells me it is wrong. I know full well the p/w is right because I live with 2 other people and they both have laptops which connect no problem.
View 6 Replies View Relatedhow to know my adsl wireless password
View 5 Replies View RelatedMy laptop shows a strong signal from my sister's router but wants a security key or password. It isn't on the router. Where can I find it? It's windows 7 on both computers.
View 1 Replies View Relatedhow to know the password for netgear wifi
View 1 Replies View RelatedHow can I find out the password for my wireless internet router without re-routing it? It is not written on the router and i do not want to pay someone to come in and re-route it. I want to be able to connect for my iPod touch and PS3. I have a D-Link router
View 2 Replies View RelatedI've been having some trouble with my ATT router. I've had it for months and there have never been any issues until now. It does not seem that it is broadcasting WiFi like usual. It will not show up on the WiFi network list on both my iPod and my laptop. I've tried resetting the router (by unplugging it and plugging it back in).
View 5 Replies View RelatedNo WiFi access from working router.I was trying to set up my AppleTv and by accident unplugged my router...I have unplugged my router & modem several times and they all show the light that the network is on..But I cannot access the WiFi network from my Ipad or Mac?what else can I do???
View 1 Replies View RelatedThe other day, I decided to set up a wifi router. Once I'd set it up, I connected my other devices to it, (laptop, iPad, iPod, etc.) but when I tried to connect my PS3 to it, the connection just timed out when it was testing the connection. I've tried it a few times - I thought maybe I'd typed in my WPA key wrong, to no avail.
View 1 Replies View Relatedim deployment and we have hardwire internet in my room. wanting to use all other devices eg. iphone and what not i bought a router to plug the hardwire in to and run the wifi off the router for all devices. its made by TP-LINK the model is TL-WR940N. it worked great for a while but then kept giving me DNS server is not responding but i could plug the hard cable in my computer and the internet would work fine? so i reset the router and set it all up again like before. Now i cant get it to run wifi off it anymore it recognizes and connect through wifi but no internet and its telling me i need to plud the hardwire in to my internet but my computer is recognizing it and saying i have internet access, but no internet i mean its not even thinking if there is internet.
View 1 Replies View RelatedI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View Relatedi have two laptops .... a month ago i have bought second 1........ the problem is that on first laptop i can easily use internet via wifi......... but on the new it asks for security key ..... and i dont know security key ........ so how can i recover my security key...............?
View 1 Replies View RelatedI'm trying to register a new nook.
View 2 Replies View Relatedi created an account lock my wifi and it work then later my internet wasnt working so i created a new one and forgot my password
View 4 Replies View RelatedI have a Cisco Aironet 1100 series access point (AP1120B) that after resetting to factory defaults the default username and password (Cisco and Cisco) aren't working in the web GUI. I am able to telnet to the AP's IP and log in with Cisco and Cisco but don't know the ENABLE password. I have tried Cisco and cisco and everything else i could think of with no luck.
I also have a Cisco Aironet AP1242AG that is doing the same thing.