Routers / Switches :: No Internet On 2nd Router Installed On Home Network?
Mar 23, 2012
I have 2 linksys routers installed on my home network. The primary router is a linksys WRT360n and is stationed inside the main home, while the 2nd is a linksys WRT160N located in my office. I've connected them via the lan to lan configuration and have disabled DHCP server on the 2nd. I can access the 2nd router via my primary PC but am unable to access the internet or see the primary from the PC connected to the 2nd router.
View 3 Replies
ADVERTISEMENT
Jan 29, 2011
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies
View Related
Nov 28, 2012
I installed windows XP and now I connect a cable from the router to the pc and I can't connect to the network.
View 1 Replies
View Related
Jul 1, 2011
I have a Kguard H264 CCTV system installed that is connected to my BTHome HUb 2 via ethernet cable.The CCTV system is registered on the home hub and has a direct ip address of 192.168.1.100 and is configured to forward port 80 which is correct.Problem is how do i now connect to the CCTV system outside of my home network i.e. using my work computer?
View 4 Replies
View Related
Jun 28, 2011
I have one lan with several PC's and static IPs 192.168.0.x 255.255.255.0 and 2 routers. One is 192.168.0.1 and the oter 192.168.0.11. I want every PC gets internet from gateway 192.168.0.11 and the other connection is set with static public IP for incoming Terminal Server Clients. The router for that connection, 192.168.0.1 has NAT setup for several ports which redirect traffic to 3 different computers. But the traffic is not redirected while those PC have the first gateway for internet (.11). To keep NAT working these 3 PC get internet from 192.168.0.1 but I don't want any computer to go out through that router.
What can I do to give internet through router .11 and send traffic to 3 of them from the other router .1 from internet to the lan?
View 5 Replies
View Related
May 5, 2011
Currently in my office have a TPlink wireless router (WR1043N), and Dlink 615 router.Below is my office's network organization.Internet-->TPLinkRouter(192.168.2.0)-->DlinkRouter(192.168.0.0)We want to host a demo website but we are afraid our network being attacked. So we wish to implement a DMZ network to hide our internal network from outside. My question is can i setup a dmz network with the above capabilities by using home routers?
View 5 Replies
View Related
Jan 16, 2011
I am able to access the internet. I am running Windows 7 on my laptop and have a wired connection between it and my intergrated router. The internet works fine, but it seems to think that I am not connected to the network. I'm not certain it realized that I even had a network, since when I try to activate media sharing it just gets stuck at "Identifying Network". The whole purpose of this is to be able to play music from my computer on my Xbox 360, alternative solutions for this goal would be good too.
View 5 Replies
View Related
May 18, 2011
I have 12 computers in Local Area Network, I am using 3MB DSL broadband, all PC using XP SP3 connected through D-Link Switch with IP address 192.168.0.201 to 192.168.0.212, The D-Link router gateway is 192.168.0.1Network diagram is as followsADSL modemouterIPC1, PC2, upto PC 12My problems are.1. All PC cannot access Internet, So I reset the modem, wait for a few minutes, if I am lucky, Internet comes back, sometimes have to wait longer 15mins or 30 mins2. PC12 is used for monitoring, but cannot see PC 1, the rest can see.When I try to ping, time out, but after sometimes....it came back, I can see PC 1, then disappear again.How do I solve this problems?Note, the ADSL modem provided by the Service provider looks normal, with Power, Ethernet and DSL lights ON.
View 15 Replies
View Related
Jan 12, 2012
How do I find my network security key for my cisco e1000 router if the computer that it is installed on is broken?
View 1 Replies
View Related
Jan 24, 2013
when I try to enable network internet connection on my computer it tells me that somebody else is using IP 192.168.0.1
View 2 Replies
View Related
Nov 7, 2011
I have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.
View 5 Replies
View Related
Dec 27, 2011
I just re-installed Windows XP Professional on my Dell XPS Gen 4. Everything works fine on it but the internet. I can open IE, but it just says "This page cannot be displayed" and on and on.Since I re-installed it I believe their are not many drivers on it, I don't really know, and I think that might be it but I am not sure. And I am not sure which drivers I need if it is missing drivers.
View 7 Replies
View Related
Feb 14, 2011
Until recently when we changed the router at work, I can access work files from my laptop and notebook from home. It seems the problem is probably from my home wireless router supplier by-aol as I can access work from my laptop anywhere else except my home. But then I have been able to do so until the work router was changed so i don't know what could be wrong?
View 1 Replies
View Related
Dec 7, 2011
Although we have a moderately wired house with cat6 cables runs in many of the rooms that all end in the basement, I am currently having trouble since I cat stream audio and video files from my desktop in the den to the netbook and receiver in the family room. All computers are hooked up by cable.I have tried a friends advice to plug in the exact IP address of the desktop (and vice versa on the netbook) but still the netbook cat find the desktop nor can the desktop find the netbook. I have tried home sharing in Windows 7 to no avail as I have been prompted to initiate a home network both on the netbook and the desktop when I think it is suppose to be initiated on one machine and same home network joined by the other.DSL Modem --> Linksys WRTGL router running Tomato --> switch -->various rooms (cont.)Family room (one of the various rooms) has a Buffalo WZR-HP-G300NH AirStation (with one USB port) --> 1) netbook and 2) Denon AVR receiver (with network capabilities)I have a switch in the den and the desktop and laptop computers can read off each other through folder/drive sharing even with Kaspersky Internet Security running in the background so I'm sure it's not Kaspersky meddling with my network sharing. If both are on the wireless network, the netbook can access the desktop and vice versa.Is it possible for the netbook to read off the desktop based on my current set up? I can't bring the desktop down as we use them in the den and will not have room for it in the family room. I am not inclined to purchase a stand-alone HTPC at the moment if there is a network sharing
View 2 Replies
View Related
Dec 23, 2011
I cannot get my new Nook Tablet to connect to my home wifi. it recognizes the network and authenticates the password but won't connect. Everything else in the house connects fine.Someone installed the router for me a couple years ago as a favour. It is a Linksys router.
View 3 Replies
View Related
Aug 14, 2011
went to change my nat type,did something wrong, reset all defaults but now my router is not connected to the internet
View 1 Replies
View Related
Oct 20, 2012
I have High Speed Charter Internet going to a modem in form of coaxial cable with one Ethernet port available and one coaxial connection for TV and a phone jack. I have that Ethernet port connected to a:Motorola Wireless Modem[CODE]
View 4 Replies
View Related
Oct 3, 2011
I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 11 Replies
View Related
Mar 18, 2012
Recently we ordered a new Modem from Centurylink to replace an old one we have. (which ironically the old one's wireless is way better) Both modems work perfectly fine, and I've tried the same things with both to figure this out. I ran an ethernet to my gaming room, which is about 150 feet. When I connect my computer directly into the modem, my computer works fine. Initially, the PS3 worked, but when I switched back to the computer with the single Ethernet cable, I was getting an IP error. Every since then, the PS3 will not connect through Ethernet. (Wireless works, but its so far away the signal is weak)
So, I dug up my router, Linksys WRT54GL, plugged it into the ethernet that came from the Modem, (did all the steps in order multiple times), and no internet through wifi or ethernet on it. The lights and everything say there is ethernet and the WIFI/Ethernet are working, but there is no internet. All the wires are confirmed fine. I've tested them on other devices plugged directly into the modem. I tried the PS3 at the modem with 3 Ethernet cords as a test, It says there is an IP Address timeout error. Regardless of what I do, the PS3 won't connect via Ethernet. And without internet working on the Linksys router, Im getting about 15-25% signal from the Modem. (which is also wireless, if that has anything to do with the issue)
I need the router to do at the very least, WIFI. I really want Ethernet though so I don't lose much speed. (We are maxed out here at 1.5mb connection from Centurylink)
When it comes to computers, I'm advanced with them. When it comes to networking, I'm okay. I understand basic things, like accessing the router or modem through the browser. I can do the whole setup for WIFI. But when it comes to how the IP address, Static IP, etc., goes, im confused by them. So forgive me if I sound ignorant. I've looked for over a week on sites, and nothing is working. The router may be broken, im not sure. I bought it a few years ago and then didn't need it till recently. So its been sitting in a box.
All I know is, I have an ethernet from the modem to this room, the PS3 refuses to get an IP, and if I do it too much the PC gets an IP conflict. If I plug the Ethernet into the internet part of the router and do wireless or Ethernet, there is no internet coming out.
View 1 Replies
View Related
Jun 19, 2011
Currently I'm living in a dorm. The house has wireless network. But WEP encryption is used to secure it. I know this method is not safe. Also since there are many people are living in the house i don't want my computers be connected to this network.What i want to do is to setup my own network. I bought a NetGear DGND3300 router. I setup a WPA2 protected wireless network. I can connect all my devices to this network but naturally this way i have no Internet access.Is there a way to use Internet access of the house's router but still keep my local traffic not seen by anybody else
View 2 Replies
View Related
Nov 24, 2011
Orange sent me a replacement Netgear DNG1000 and from the moment I had it there was issues, if N mode was enabled and I had to set it to B/G only for it to have a stable connection, not a problem as I only use it for the internet. The range on it was roughly the same as the livebox. For a few weeks it worked fine until recently it started to go insane, on the main computer the wifi works most of the time with 80%-95% signal strength, and then every now and then it will suddenly lose communication with the router but act as if it was connected for 5-10 minutes, signal strength is still at about 90% yet I can't access the router or the internet. Wifi works fine at full speed on the stairs, drops to a few bytes per second on the landing and then increases back up to full speed in the room next to it. In the one bedroom the wifi works up until the door where it instantly drops from full speed to a few bytes a second. This drop off point is only a few cms, as in full speed at one place, move it back a few cm and it slows down loads, but I still get 4-5 bars on windows and -50 RSSI on inSSIDer, about 94% strength and a link quality which tends to fluctuate. What could be causing this, specifically the weird instant deadzones and randomly not responding.
View 1 Replies
View Related
May 23, 2012
I bought a new router last night in an attempt to fix some internet issues. I replaced my old router (an N150 lynksis) with the one I bought (an N300 netgear) and after getting all the wires connected, my computer wouldn't connect to the internet and it wouldnt recognize the router as anything other than "Unidentified Network". I've tried reseting and power cycling the modem, shuting down the computer, even some random tips from the internet but nothing seems to be working.
View 1 Replies
View Related
Apr 11, 2011
I have this LinkSys by Cisco Wireless-N gigabit model# WRT310N router that quit functioning in a weird way. (it has Wi-Fi protected setup on it, not sure if that would effect it, it's disabled) I have a friend in the condo above mine, but i have a Dial-Up internet conn and can afford a good broadband internet conn. a co-worker gave this router to me, saying he didn't need it for his network at home. It was still in original box, unopened, So it was intact. i set it up so i can play Age of Empires 1 (you probably haven't heard of it, it's a single player or Multi-player TCP/IP comp-to-comp game from '96) and i used a gigabit wired conn, he used wireless-N laptop. We played a few games, on the 4th game, it locks up about 12 mins into the game. we try again, the comp not even recognize each other. Knowing a little about networking from watching the IT guys at work, i tried the PING command in cmd.exe in vista, it will ping the router, not the other laptop. same thing on the other laptop pinging my desktop. i unplugged the router, and went to sleep.Next day, i got back from work, called the friend, plugged the router back in, and it work for another 14 mins, no ping. possibilities? the LinkSys website doesn't give answers, so what is it?Further Edit: my Gigabit conn is going through a 3 ft CAT5e cable, and the wireless-N trans rate is set to 130 Mbps.
View 2 Replies
View Related
Mar 11, 2011
For some time now, I haven't been able to connect to websites from one.com, from my personal network.I've had full access to all those sites before and the only change I've made myself, is changing the standard internet browser from IE to Firefox.At first I thought the problem was on my desktop Win7 computer (which uses a network cable), but after testing the sites on my macbook, with a wireless connection, and having the same issue.
View 4 Replies
View Related
Mar 2, 2011
i use time warner cable for many year and now it have a problem with " couldn't find a network " i try many way but still no work . 1 i do pull the plug off and plug in ( usually it works ) 2 i brought a new router ( still " not able to find network " ) 3 i plug direct computer to the modem and it work but dns doesn't work
View 1 Replies
View Related
Jul 28, 2011
I am somewhat of a neophyte at networking and I have a question. I have a small business network using a secure wireless router connected to my cable modem. We have a DVR security system which we would like to monitor remotely. I would like to keep the DVR separate from my secure wireless router for security reasons. My thought is to connect the DVR through a cable or wired modem into my cable modem. Do you folks think this will cause an issue with the wireless router which uses DHCP to determine the IP address?
View 1 Replies
View Related
Aug 7, 2012
I have one ADSL router that I have configured Port Forwarding on it, but the internet is very slow. I also have another 3G router and I want to use it for internet because it is much faster, but it cannot do Port Forwarding. How can I connect this two routers in one network such that ADSL router is for Port Forwarding only and 3G router is for internet only?
View 1 Replies
View Related
Mar 15, 2012
I um using ATT UVERSE for my Internet connection. Now I use a Net-gear what is plugged into the PC and into the ATT "Gateway" How they call it. What is how I see it nothing different than a Router with ATT Logo on, but now to my question I have a LAN Cable going to my living room and have a switch there for all my TV ? PO-Box for streaming my direct TV Internet etc. Now I have not perfect Wireless in the whole house.. no I thought can I use the Net-gear Router in the Living room instead of a switch and also send a wireless signal from there.
View 5 Replies
View Related
Sep 14, 2011
Am running WIN 7 64 BIT and have today installed a BT Home Hub 3. WiFi signal is very poor. (1 1/2 bars only) Have Belkin Wireless G Card in computer and previously used it with Netgear DG834G router with very good signal strength.Do I now need to disable the Belkin card in order for the BT Hub to produce a decent signal?
View 1 Replies
View Related
Feb 3, 2013
Lost connection to Internet though router appears normal. Belkin router, MacBook.
View 1 Replies
View Related
Jan 18, 2012
why i cannot connect my internet in 50 meters away from router to computer
View 2 Replies
View Related
Jul 16, 2012
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 USB dongle directly into my computer it works perfectly and I got the router to work using a Ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port
View 3 Replies
View Related
Jun 17, 2012
i am adding a wired router,during configuration i must choose between PPPoE,Dynamic,Static connection type. i have broadband cable isp
View 2 Replies
View Related
