Routers / Switches :: Unidentified Network After Installing A New Router?
May 23, 2012
I bought a new router last night in an attempt to fix some internet issues. I replaced my old router (an N150 lynksis) with the one I bought (an N300 netgear) and after getting all the wires connected, my computer wouldn't connect to the internet and it wouldnt recognize the router as anything other than "Unidentified Network". I've tried reseting and power cycling the modem, shuting down the computer, even some random tips from the internet but nothing seems to be working.
View 1 Replies
ADVERTISEMENT
Jan 5, 2013
I just purchased netgear N150 single band wireless router WNR1000v3. I cant get to the 192.168.9.1 site to detup manually and when i insert the set up CD it scans the config & says that my ethernet adapter isn't intstalled or enabled....I HAVE A CABLE FROM THE SATELLITE MODEM to my computer which works fine when I am connected direcrtly to it, so I dont get what the problem is. Do I need a different cable connecting my computer to the LAN on the router or am I missing something?
View 2 Replies
View Related
May 6, 2012
am in the process of setting up an online business and now all of a sudden I have no internet access which is not good! I am connected to the router but it says unidentified network, local only...When I lost connectivity I spoke to my ISP provider and they took me through all the steps then determined that it is the router that is at fault and are sending me a new one. HOWEVER after I hung up I remembered I have an old router so I tried that one, same thing, then my neighbours gave me access to their wi-fi, same thing.... so suspecting that it is not the router I have dug out an old laptop which now connects fine to my router wirelessly.
View 19 Replies
View Related
Nov 9, 2012
As per settings menu, I tried to give it an IP address but the new address is not accessible for further configuration. When I connected to the router it status changes to "unidentified network".
My primary network address range is 192.168.1.1 to 192.168.1.10. So I gave address to belkin as 192.168.1.100. But I can not access this address from both primary and belkin network.
View 2 Replies
View Related
Jan 29, 2011
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies
View Related
Mar 8, 2013
In my office there is n computing using a Digisol router, and a Broadband connection(BSNL) whose modem is of ZTE. My boss has blocked the internet service to those systems and the error message is "Local Area Network doesn't have a valid IP configuration". how to unblock it as a system parallel to it which is independent from N computing is having internet connection.....
View 2 Replies
View Related
Mar 9, 2013
I`ve run into some trouble connecting to the internet after unplugging my router & modem yesterday and when i plugged them back in again i can`t connect to internet anymore.My computer have a wired ethernet cable connection and i also have a router (D-link DIR-635) giving internet to my iPhone & iPad.When i connect the ethernet cable from computer directly to the broadband modem i get internet without any trouble but when i connect it via the router, i keep getting "unidentified network" error i windows 7.Here`s what i`ve done so far trying to solve this,1. Uninstalled the driver for my network card (Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) and re-installed but without any luck..2. Resetted the router & also changed to another router (D-link DIR-615) with the exact same results.
View 5 Replies
View Related
Nov 13, 2012
I am running windows 7 which has recently been updated from Vista. other computers on the wifi network are running vista. I have a net gear CG3000 IStaus router/cable modem attached to one of the other computers on the network. My network adapter is TP-Link.My firewall is commodore and my virus software is avast (both free versions). My SP is Optus. When I first installed windows 7 everything was working fine . In the last few weeks when I login to my computer, I can attach to the other computers but I have no internet connection. When I go into manage wireless networks it says I am connected to an unidentified network which has no Internet connection. I have tried deleting this network from " manage wireless networks", moving it down in this list, making it a manual connection. I have uninstalled the network adapter and reinstalled it and other ideas picked up from the web. Nothing seems to work. Sometimes I will get a quick window where it will work but then it disconnects again and the unidentified network is back. Not today though so am typing this on my IPad. I can't download or install XIRUS WIFI for obvious reasons.
View 4 Replies
View Related
Jan 24, 2013
I have a Dell Aspire 5332 laptop and i haven't used it since November 2012 (where it was working fine).It had Windows updates when i switched it off. I switched it on today and i have no internet connection. When hovering over the icon it says unidentified network - no internet access. My service provider is British Telecom and i am on the Fibre Optic package. I am using the BT Home Hub 2.0.Fibre Type B and also a Echolife HG 612 model FTCC VDSL NTE Router. I have Norton installed on the machine but there is only 1 day left on the subscription. I have tried a wired connection from the router but still have the same message. 2 other computers are wired to the router and all of our Ipads and Macbook connect wirelessly with no problems.
View 19 Replies
View Related
Apr 11, 2011
I have this LinkSys by Cisco Wireless-N gigabit model# WRT310N router that quit functioning in a weird way. (it has Wi-Fi protected setup on it, not sure if that would effect it, it's disabled) I have a friend in the condo above mine, but i have a Dial-Up internet conn and can afford a good broadband internet conn. a co-worker gave this router to me, saying he didn't need it for his network at home. It was still in original box, unopened, So it was intact. i set it up so i can play Age of Empires 1 (you probably haven't heard of it, it's a single player or Multi-player TCP/IP comp-to-comp game from '96) and i used a gigabit wired conn, he used wireless-N laptop. We played a few games, on the 4th game, it locks up about 12 mins into the game. we try again, the comp not even recognize each other. Knowing a little about networking from watching the IT guys at work, i tried the PING command in cmd.exe in vista, it will ping the router, not the other laptop. same thing on the other laptop pinging my desktop. i unplugged the router, and went to sleep.Next day, i got back from work, called the friend, plugged the router back in, and it work for another 14 mins, no ping. possibilities? the LinkSys website doesn't give answers, so what is it?Further Edit: my Gigabit conn is going through a 3 ft CAT5e cable, and the wireless-N trans rate is set to 130 Mbps.
View 2 Replies
View Related
Mar 11, 2011
For some time now, I haven't been able to connect to websites from one.com, from my personal network.I've had full access to all those sites before and the only change I've made myself, is changing the standard internet browser from IE to Firefox.At first I thought the problem was on my desktop Win7 computer (which uses a network cable), but after testing the sites on my macbook, with a wireless connection, and having the same issue.
View 4 Replies
View Related
Mar 2, 2011
i use time warner cable for many year and now it have a problem with " couldn't find a network " i try many way but still no work . 1 i do pull the plug off and plug in ( usually it works ) 2 i brought a new router ( still " not able to find network " ) 3 i plug direct computer to the modem and it work but dns doesn't work
View 1 Replies
View Related
Jul 28, 2011
I am somewhat of a neophyte at networking and I have a question. I have a small business network using a secure wireless router connected to my cable modem. We have a DVR security system which we would like to monitor remotely. I would like to keep the DVR separate from my secure wireless router for security reasons. My thought is to connect the DVR through a cable or wired modem into my cable modem. Do you folks think this will cause an issue with the wireless router which uses DHCP to determine the IP address?
View 1 Replies
View Related
Aug 7, 2012
I have one ADSL router that I have configured Port Forwarding on it, but the internet is very slow. I also have another 3G router and I want to use it for internet because it is much faster, but it cannot do Port Forwarding. How can I connect this two routers in one network such that ADSL router is for Port Forwarding only and 3G router is for internet only?
View 1 Replies
View Related
Mar 15, 2012
I um using ATT UVERSE for my Internet connection. Now I use a Net-gear what is plugged into the PC and into the ATT "Gateway" How they call it. What is how I see it nothing different than a Router with ATT Logo on, but now to my question I have a LAN Cable going to my living room and have a switch there for all my TV ? PO-Box for streaming my direct TV Internet etc. Now I have not perfect Wireless in the whole house.. no I thought can I use the Net-gear Router in the Living room instead of a switch and also send a wireless signal from there.
View 5 Replies
View Related
Mar 23, 2012
I have 2 linksys routers installed on my home network. The primary router is a linksys WRT360n and is stationed inside the main home, while the 2nd is a linksys WRT160N located in my office. I've connected them via the lan to lan configuration and have disabled DHCP server on the 2nd. I can access the 2nd router via my primary PC but am unable to access the internet or see the primary from the PC connected to the 2nd router.
View 3 Replies
View Related
Jul 25, 2012
I have HP laserjet 4000 tn. Had an old router and upgraded to a new wireless router, when connecting it to the new router, the port I connect to has the amber light come on. I have reset to factory setting thinking it would reset and capture a new ip address. still giving me problems. try connecting it to my macbook pro and cannot get a "fix" on the printer either. I know it has to do with the configuration of the printer.
View 3 Replies
View Related
Sep 18, 2011
I am following instructions I found to set up my wirelss network, but am having trouble configuring my router. I'm specifically at a standstill, because I can't connect to http://192.168.1.1. I pinged the router and got a response and went to run/ip config to confirm I have the right URL for the router, but still not able to get to the URL.
View 1 Replies
View Related
Aug 14, 2012
I have a Linksys E2000 router. I am trying to install an Epson NX230 printer on my home network. Apparently, the Epson printer has a MAC address assigned to it. My network cannot find the printer. I looked at my riuter setup and the MAC Address Clone has two buttons, Enabled Disabled. The Disabled button is clicked on. Accdording to documentation I foudn on this website, it looks like I can Enabled the MAC Address clone button. The document also mentgioend entereding the MAC address for a PC.
If I enable the MAC Address Clone, do I enter the MAC address for the printer or during the install process does the MAC address get installed also
View 9 Replies
View Related
Oct 8, 2012
i can search for networks. As you can tell i am currently on the internet on my laptop. I can search for the current network i am on through my adapter. I then connect to it. It says im connected to a unidentified network. It will not let me search the internet or anything else.
View 9 Replies
View Related
Mar 7, 2012
I have seen this at two sites now: after migrating the site T1 to 10-Mbps Opt-E-MAN and replacing old 10/100 switches with 10/100/1000 switches, users frequently get http connection errors. The error goes away if the user reloads the page--sometimes they have to reload more than once. They never had this problem before.I thought it was due to the large number of 5-port desktop switches infesting the networks (I'm getting rid of them as fast as I can) but it happens even on a PC directly connected to one of the new GigE switches. It does not happen when accessing internal web pages. It looks like a DNS failure -- but nothing has changed in our DNS setup, except that users have a fatter pipe to our DNS servers.
View 3 Replies
View Related
Jul 26, 2012
I have one cisco 2851 router and one watchguare firewal currently being used as the main router. I want to connect the cisco as a secondary router on the same network.
View 10 Replies
View Related
Jan 19, 2011
how to connect 2 routers on different lan
View 3 Replies
View Related
May 23, 2012
During this time we've had two different Internet Service Providers as well as two different modems. Also we've had 9 different devices connected to modem wirelessly. ( 2 Desktops, 3 laptops, 2 Xbox 360s, and 2 Nintendo Dss ) And this desktop is the only one that has had any issues, it's also the oldest of the devices. So I doubt the issue lies within networking but more with the actual desktop. I've even conneceted the desktop straight to the modem with an ethernet cord, also to no avail.
View 1 Replies
View Related
Apr 25, 2011
ok i did the cmd ipconfig and it says media state disconnected.also i uninstall a network adapter it was the isatap one also it had a yellow mark one it so thats why i tryed to uninstall it i thought it would let me install it agian but it didnt so i did that add legacy hardware so now it shows it in the hidden devices tad with out that yellow mark also when i try the problem and solution found the isatap sayinf could not load driver software click on it and it says windows was able to successfully install device driver software but the driver software encountered a problem when it tried to run.the problem code is 31. the control panel tad would all was say microsoft windows came up saying window explorer has stopped working windows is checking for solution to the problem windows explorer the internet was working then and it still was i think it had that internet ball on it but when i try to use the internet it wouldnt connect
View 8 Replies
View Related
Oct 22, 2011
Prior we only had 62.5u multi mode.I've got 3750x switches and new SM SFP and yellow fiber patch cables. None of my links show connected. No lights and trunk port interfaces show down/down.
Is there a special command you have to do on a port when using SM fiber? Do you think I need cross over fibers?
Also, should I be able to see a laser signal light like MM or is SM a different frequency so it's not as visible as MM?
View 8 Replies
View Related
Apr 23, 2011
how to connect two subnets with two switches and one router using router sim software?
View 1 Replies
View Related
Jan 15, 2012
One moment the laptop was using the wireless connection from the router in our house and the next it lost internet access and then wasn't able to recognize the SSID or connection at all on the available wireless connections. We have reset the router and restarted the laptop countless times yet the only internet access we have is on the computer the router is hooked up to.The wireless connection works neither on the laptop nor the Wii, both previously works merely hours ago and with no problems until now.We assume there is an issue with the router itself, whether it be a loose ethernet cord (which only faintly can be moved in its place).It's almost as if the router is stopping them (Wii, and laptop) from having access. When we explore the wireless internet properties on the laptop, it shows the wireless connection, yet only there and doesn't give access to it. Could it be the router, or could the company have restricted WiFi only to the computer it is hooked up to?
View 1 Replies
View Related
Dec 12, 2011
I switched on my laptop today and it wouldn't connect to the internet because of an 'unidentified network' problem. Last night before I went to bed it was surfing the net fine and then this morning, nothing. No one has touched the laptop overnight and it was switched off all night so I have no idea how this has happened. I'm using my internet connection via my iPhone with no problems. I've already tried several things to try and fix the problem - I've reinstalled all network adapters, have fiddled with IPv4 settings, have deleted and re-setup my network connection, and have restored Windows to a previous point. I can't connect my laptop to the router using a cable because I live in a bock of flats where lots of people share the same router and it's locked in a security box, so I'm just using a wireless connection.
View 1 Replies
View Related
Nov 5, 2012
Right now I've been staying at a hotel and my internet doesn't work while my brothers laptop connects flawlessly. The only way the internet works again is by me tapping the power button and putting it to sleep and turning it back on then the internet works but only for a couple of minutes.
I've tried everything, I've installed the latest wireless driver worked a little then went back to the same problem then I rolled back the driver it worked then it went back to the same problem. I've tried everything I checked power options, I reset the winsock and Ip,I tried a vpn still no luck. If I go to network and sharing center and trouble shoot it say that the adapter is not plugged in or the DHCP is not enabled which it is. Like today I could barely get on because it just showed unidentified network with no hope of connecting. On Xirrus it shows the hotel has more one ssid with the same name.
View 5 Replies
View Related
Feb 27, 2012
recently i bought a phone that has the ability to connect your pc to the internet. It has worked great, but when i connect my ps3 or another computer to my laptop which i use the phone with, they all come up as unidentified network. I tried changing the setting on my computer, but cant seem to figure out how to change it from unidentified to home, so i can use the internet on connected pc's and my ps3.
View 1 Replies
View Related
Sep 15, 2012
I am in a network, where my laptop works in all other routers except my room's router, whereas other's laptop/PC supports my room's routerI'm out of the network.However, I'm now in same network, coin another router.
View 1 Replies
View Related
Jun 23, 2012
I have my wireless router that gives internet to all my computers (4), each one having their own usb wifi adaptor. This part works fine, never had any issue with internet.Each of the computers also have its own GBE adapter but i wasn't really using them. Until now, i bought a switch and connected all 4 computers through rj-45 to the switch just so i could transfer files easier and especially much faster than through the wireless.This is where my problem is, the network works, i can see and transfer files just fine, the issue being, on each and every computer, the lan is considered as unidentified public network. I've tried everything i could think of, yet, nothing, i can't change the status of the lan connection.
View 31 Replies
View Related
