Use Dual Network Connections?
Sep 9, 2011i have dual network connections.and i want to divide them. 1 for browsing on internet browsers and the 2nd for heavy downloading.
View 8 Replies
ADVERTISEMENT
Cisco VPN :: ASA 5510 - Dual WAN Connections
Nov 29, 2011Context:1- My company has one ASA 5510 configured with Site-to-site VPN, Ip sec Cisco VPN and Any Connect VPN.2- We use ASA to connect to the single ISP (ISP 1) for internet access. ASA does all the Na Ting for internal users to go out.3- A second link is coming in and we will be using ISP 2 to load balance traffic to internet (i.e. business traffic will go via ISP1 and “other” traffic will go via ISP2).4- A router will be deployed in front of the ASA to terminate internet links.5- No BGP should be used to implement policy (traffic X goes via ISP1, traffic Y goes via ISP2). Questions:How do I get this done, particularly, how do I tell the router, for traffic X use ISP1 and for traffic Y use ISP2? PBR is my friend?Since I will be having 2 public Ip Addresses from the 2 ISPs, how do I NAT internal users to the 2 public Ip addresses ?. Finally, which device should be doing the Na Ting? The ASA just like now or move Na Ting to the Router?
View 9 Replies View RelatedCisco Routers :: RV042G Dual WAN Connections?
Jun 5, 2013We are connecting to a Cisco DPC3825 cable modem supplied by our ISP. It has been configured to act as a switch only. They have supplied us with 2 static IP addresses.
When each WAN port is connected individually, everything is fine. I see the IP addresses on the respective WAN port, and it is working fine.
When I connect both WAN ports to the modem at the same time, I see a large amount of traffic between the WAN ports, as indicated by the port LEDs, and the RV042G becomes completely non-responsive through its web interface.
How do I get the RV042G working with both WAN ports connected?
Cisco WAN :: Config On 2950 Dual Internet Connections Without BGP Enabled ISP
Feb 11, 2012i have come across this solution to dual internet connections, c2950-i6k2l2q4-mz.121-22.EA14.bin is the IOS and the router is a 2950 Dual Wan model. I don't know alot about this stuff I'll admit, but it is on the default configuration with IP 192.168.27.7 255.255.255.0, gateway at 192.168.27.8. The hostname below is something I don't know exactly what it means but my guess is its the line at the command prompt with the name.
It has VLAN1 with fa0/1-24, gi0/1 - 2.
This is the script but I don't know why its not taking the commands as at ip sla monitor 1 I get invalid command error. What do the ! mean are they comments and not entered?
Cisco Routers :: RV-042G With Dual WAN Connections - No Internet After An Hour?
Dec 25, 2012I just upgraded from RV-042 to RV-042G on 24.Dec.
My previous connections are : (1st) 100Mbps ISP connection, (2nd) 200Mbps ISP connection (fibre to home)
Before upgrade, my RV-042 worked very stable.
After using Migration Tools by exporting RV-042 current config and converted to V3 configuration, the converted configuration was imported to RV-042G.
In beginning, RV-042G woks fine after imported converted configuration file. Unfortunately, after around 1 hour of use, my iPad (through an Apple Airport Extreme Station) and wired PC could not browse internet.
But, port-forward to 3 IP-cam still be able to access by my iPhon4 through Carrier 3G connections.
After a reboot of RV-042G, internet connection comes back. But, after an hour of use, the same issue happened again.
RV-042G makes me fluctuated. I will fallback to RV-042 from now on and wait for any further firmware improvement from Cisco/Linksys.
My previous RV-042 and current RV-042G config:-
* WAN1 : 100Mbps ISP connection
* WAN2 : 1Gbips ISP connection ( 200Mbps max throughput)
* LAN1 : connected to Apple Airport Extreme
* LAN2 : connected to Linksys 16-port FastEthernet switch
* LAN3 : idle
* LAN4 : connected to an Intel i7 PC
* Dual WAN link mode with bandwidth management, all internet connection from PC will stick on WAN2
Cisco Firewall :: 5505 High Availability Over Dual WAN Connections
Mar 20, 2011One of my remote sites acquires Internet connectivity via a cable modem service. This goes down intermittently, of course. I would like to purchase DSL service from the local telco and configure the edge ASA (currently a 5505) to use the cable modem path normally ... and fall back to the DSL path if necessary.
These seems hard to do. The edge box would need to evaluate the viability of a WAN path using some set of tests ... perhaps pings to a handful of major Internet sites. If all those pings start failing, it would stall for a minute, to give the WAN service provider time to recover ... then cut over to the second path. Cutting to the second path might mean pushing new DNS server addresses to clients (or perhaps the edge box would hand out both sets of DNS servers all the time and rely on the clients to try them all.) Once the cable modem provider restored service, the edge box would stall for a while (ten minutes? an hour?) and then cut back.
I'm willing to replace the edge box with something fancier (a bigger ASA or something sold as a router or whatever), although I'd like to stay under 10K (list) for such a replacement.
Cisco WAN :: ASA5505 / Setting Access Policies Dual Internet Connections
Jun 7, 2011I'm trying to set up a S2S VPN between two ASA5505 SP units running ASA Version 8.2(1). I've ordered additional ADSL2 lines to handle this traffic and I'm having troubles with the configuration for the additional PPPoE connection. Here is are extracts from my current config; First the interface vlans
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
[code]....
The result being that I can ping the OUTSIDE interface, but get no reply from the VPN interface. I've checked ADSL lines, they are up. The two PPPoE sessions are logged in and active. I can even see the ICMP packets hit the VPN interface, but there is no reply.
Cisco Firewall :: ASA 5510 - Dual Internet Connections / Routing DMZ Traffic
May 29, 2012I am having an issue when implementing an additional internet connection on our ASA 5510. The new connection is "TWCOutside". I was my understanding that static NAT would force our externally hosted servers (Email, PPTP VPN, and FTP) to continue to utilize the "ATTOutside" connection. Our remote site-to-site VPN traffic has two static routes configured to force it to continue to use the ATTOutside connection.When I switch the metric on the 0.0.0.0 0.0.0.0 98.103.148.145 route to 1, and change out default dynamic xlate to use "TWCOutside", it "mostly" works as expected. Email, the PPTP VPN server, and our remote site-to-site VPN server continue to use the ATTOutside connection as designed. Our end users begin using the new connection for thier internet browsing.
However, our FTP server, in the DMZ, completley loses outside access. It cannot ping to 8.8.8.8, or resolve DNS queries. The is a static NAT statement for this server, as it is using one of our dedicated public IP addresses. I need it to continue to do so for the next few weeks.Effectivley, we just want to give our end users internet browsing on the new TWC link, but leave everything else on the old ATT link for the time being. The only problem I am having is the DMZ connection. I am currently "rolled back", so no one is using the new connection until I figure this out. I can easily switch the metric and dynamic PAT back to using the TWC connection, but I need to have some things to try with the DMZ before doing so. [code]
TP-Link Dual-Band Wireless :: TL-WDR4300 - OpenVPN UDP Connections Are Being Blocked By Router
Apr 14, 2013Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Latest
ISP :
The UDP connections are being blocked when I use my VPN. I can connect for a while but soon after a while, the connection doesn't work. I can't even access the router page.
Cabling / Cards :: Can't Find Network Adapters On Network Connections
Aug 13, 2012i am having a problem with my desktop right now, just recently i re-installed Windows7, a clean format... but then i suddenly noticed that i cant connect to the internet, no network adapters are detected on the Network Connections, its empty i looked at the Device Manager and saw a yellow warning on realtek rtl8139/810x family fast ethernet nic, i download the driver using my laptop (wireless connection)... and installed that driver on my desktop pc then checked the device manager once again, but it still has a yellow warning.i dont know what to do anymore, and at the last screenshot theres this error message: This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system.i have two lan cards, one at the motherboard(not in use) and the other PCI-E lan card (tp-link ) ...im just wondering if that Realtek i just installed is the lan driver for the motherboard?
View 2 Replies View RelatedCisco Switching/Routing :: Nexus 5596UP Dual-sided VPC Design With Dual Connected
Feb 19, 2012I would like to make a design with 4 Nexus 5596UP. 2 of them equipped with Layer 3 Expansion Module so they can serve as core layer and the other 2 Nexus used as Layer 2 for aggregation server layer.The 2 Nexus in the core layer will run HSRP and will peer with ISP via BGP for Internet connection The 2 Nexus in the aggregation layer will be configured as layer 2 device and have FEX and switches connected to them.What I am ensure of is how the vpc and port-channel configuration should look like between the 4 nexus. What I was thinking is to run vpc between the 2 Nexus in the aggregation layer and between the 2 Nexus in the core layer. Than I was thinking of connecting each Nexus in the aggragtion layer to both Nexus in the core layer using port-channel and vice-versa.
View 3 Replies View RelatedHow To Set Up Dual Network Adapters
Jun 27, 2011I just upgraded his personal computer. It has an internal wireless card and we have a USB wireless adapter installed.What is the proper way to configure one adapter to connect to the network (via the existing linksys router) and the other adapter to connect to the ATT Hotspot? The goal being able to access the internet from the PC while still being connected to the network. Not interested in sharing the internet connection across the network or anything.It works sometimes, but establishing and maintaining a working connection to both simultaneously is not consistent. From the internet research I've done, it seems like there can be issue with the IP addresses, but I can't find a tutorial for my exact situation.
View 1 Replies View RelatedCisco :: Dual SSID (with Dual VLAN) On AiroNet 1130?
Dec 17, 2012how to change our wireless setup. Currently, we have 2 Cisco AiroNet 1130 WAP's in the office that go directly into the 2 POE ports on our Cisco ASA 5500. These WAP's have 1 SSID and are using WEP for security. After demonstrating the flaws of WEP to my boss, he has agreed that we should use something more secure and I've suggested WPA. We want visitors to our office to be able to hop on our wireless but on a separate guest SSID with WEP.
I'd like the internal SSID to route to the ASA and take the default route to the internet (it will be our new fiber connection once it's installed in a couple weeks). The default route is whichever connection is working since our ASA 5500 will fail over when it detects an outage.
I'd like the guest SSID to route to the ASA and then go over our existing cable connection. This connection will be our backup once the fiber connection is installed. Since we won't be using it very often, but will be paying for it, I advised that we send all guest wireless traffic over this connection since 50/5 is plenty for guests.
The current SSID (which will be the internal SSID) has no VLAN. We do currently have a few VLANS on our network, one for voice (.42) and one for data (.100) and the default (.0). What device to I create the VLAN on (Cisco 5500?) and how to I setup the WAP? I need very basic instructions to start and I'm also trying to do this without causing downtime if possible.
I've attached a diagram of what it should look like. Red indicates our internal network and Blue indicates the guest network. I can send screenshots as well.
Cisco WAN :: Dual MPLS Routers Connected To Dual N5K Core
Mar 29, 2012I wanted to ask a question about the diagram I have included. We are bringing up 2 MPLS WAN connections and would like some specifics on the best design. We are using BGP to the providers. From there we have big questions. We can run BGP internal and are licensed to do so on the N5K's. The N5Ks are currently using HSRP for inside LAN clients as default gateway. We want to load balance and provide redundant routes using a dynamic approach. Should we use BGP internal utilizing the connections between the routers? Should we use HSRP on the routers? How best to get the routes to the N5K and should we be considering this?
View 5 Replies View RelatedSetting Up A Dual Router Network?
Feb 16, 2011i have verizon DSL. Their newest router, the westell 7500, and their older one, the westell 327w. I want to setup a home network. I have heard there is a way to have these 2 routers connect wirelessly (one threw the other) so that i can hook up direct tv dvr to the internet w/out running a long cable.
View 3 Replies View RelatedCisco Routers :: VPN Configuration For Dual WAN On Dual RV042
Feb 21, 2013I run 2 RV042 V1 for home and office with Gateway to Gateway VPN connection with single WAN connection in use. Everything works like a charm!
I was even able to create VPN connection with 2 WAN connection on one Router and 1 WAN connection on another with Smart link failover and VPN Tunel Backup.
I got problem though when i tried more complex connection diagram. [URL]
So basically I now have 2 ISP connections on each point with Static IPs and I'd like VPN Connection to be alive for ALL 4 options automatically with failovers (smart links) And tunel backups but i'm not sure if that's ever possible with my equipment.
LAN Does Not Appear In Network Connections?
Aug 17, 2012The problem started a few days ago, with no apparent catalyst. I'm running Windows XP SP3 on a computer I built myself. The ethernet controller is built into my motherboard, an ASUS P5Q SE PLUS. As far as I can determine, the ethernet controller is a Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC. Here's the ipconfig that I ran:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsOwner>ipconfig /all
[Code]......
Why Dual Ring Network Is Counter Rotating
Jan 31, 2013In the Dual ring network using the token passing method, we have the primary ring and the secondary one where in the normal situation only the primary ring is carrying the token in one direction and when this ring is down the secondary will start into operation and takes the token and rotate in the inverse direction of the primary to reach its destination. Why the secondary ring doesn't continue in the same direction to the destination?
View 10 Replies View RelatedDual Nics For Accessing Network And Dedicated NAS?
Nov 24, 2011I'm trying to setup a server with two nics, one of which is connected to the network, and the other connected to a NAS via crossover. I've never done anything with subnetting, but I was thinking I could just set the main nic to 192.168.10.20 with a subnet of 255.255.255.0 and the other to 192.168.10.250 with a subnet of 255.255.255.240 and the nas nic set to 192.168.10.251
Am I thinking through this right, or is there a better way to do this?
2 Internet Connections Under 1 Network?
Feb 10, 2013i have 30 pcs hooked up under one network. all 30 sharing 1 internet connection. 10 of those are put in a separate room for certain reasons. but those 10 like to download and cause lag to the other 20 pcs. my plan is to keep the 30 pcs under 1 network but ill add another internet connection exclusively for the 10pcs. and the original internet connection exclusively for the 20 pcs. how can i do that? reason why i need all 30 in the same network is cause they all use softwares needed to be connected to each other locally.
View 3 Replies View RelatedNo LAN Showing In Network Connections?
Aug 19, 2012I have a desktop PC where the only internet connection is via a 'USB mobilebroadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN (not connected to internet) and dongle (connected to internet) connections.My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless NetworkAdapter" and "Realtek PCIe FE Family Controller" are both showing without any ?
Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.
No Wireless Connections To Nas In Network
Aug 22, 2011I have a NAS connected to my network and all the computers/laptops can use it if connected via the ethernet (all use various operating systems, no static ip's). as soon as I try and use them on the wireless none of them will see the nas, they are all connected to the network and can use the internet, just no connection to the nas.My Router Ip is 192.168.1.1 and my nas IP is 192.168.1.254, I have tried setting the nas to automatically getting an ip from the router aswell but this still doesn't make any difference.
View 7 Replies View RelatedRed X In Wireless In Network Connections?
Dec 5, 2011I lost connection to the wireless.I cannot find any wireless networks, which is obviously incorrect. The switch is plugged in. I can plug a cat-5 in and run fine. I can connect to the wireless with other machines fine. Something is up with this computer. I use Virtual Boxes on here and see that there is a "Virtual Box Host Only Network" that I've never noticed.I've disabled this but my wireless is still not finding anything.
View 5 Replies View RelatedWhat Are Different Types Of Network Connections
Mar 12, 2011What are the differences between DSL and cable, what makes Cable and DSL diff? How do these different networks work? Also, speed ranges would be great. There's also T1 and T3 and such? How bout those diff kinds of networks?
View 6 Replies View RelatedHP D330 - Can't See Network Connections?
Jul 11, 2011am using HP d330.I cant see my network connections as i connected my network cable to the card. The card shows no problem.
View 2 Replies View RelatedCan Have Two Internet Connections On Same Network
Aug 1, 2011Can I have two internet connections on the same network. Other computers accessing internet through router A other router B
View 1 Replies View RelatedHome Network :: Settings With Dual NIC Cards And Camera?
Aug 22, 2011I have a computer in my garage that is connected to my Linksys router in the house via Cat 6 Cable. The computer in the garage has dual NIC cards installed and working fine. I am trying to get the Camera to feed back to the router from the second NIC card in the garage computer.The first NIC is communicating fine with the router.
Linksys Settings:
192.168.1.1
255.255.255.0
NIC 1:
192.168.1.145 (static)
255.255.255.0
192.168.1.1
[code]....
After messing around with many different thoughts and tries, I have successfully contacted 192.168.1.120 (the camera) from garage Computer While camera is connected to NIC 2.Camera wants a crossover cable to function properly and won't accept patch cable, I have tried with new cables...no change it needs crossover cable when connected straight to the NICs.
Camera:
192.168.1.120
255.255.255.0
192.168.1.1
Now the problem is I cannot view or access the Camera from my main Computer inside the house Like I need to....
Cisco Application :: CSS11501 Dual Network Connection
May 24, 2011I have CSS CSS11501 which is working fine in single arm deployment. Now I want to have redudency so that in case the switch 1 where CSS is currenlty connected is down.I can reach the CSS through the second switch 2.Both the switch are trunk with each other and CSS has one port connected with Switch 2.
View 2 Replies View RelatedBroadband :: Can't See Network Connections / Add Xbox
May 21, 2012Cant see my network connections,cant add my xbo..
View 1 Replies View RelatedLan Icon Is Missing From Network Connections In Xp?
Jan 8, 2012LAN icon is missing in xp. the icon is missing from Network Connections and doesn't showup. Anyway to make it appear.
View 1 Replies View RelatedPC XP Slow Boot For Network Connections?
Jun 19, 2011XP slow boot for network connections When start PC it goes normal and quickly until comes to network icons in the right low window. It takes 5 minutes for network icons to show up.
View 2 Replies View RelatedNetwork Connections Randomly Disabling
Aug 26, 2011I currently own a Lenovo Thinkpad x201 Tablet Laptop.The issue is that I randomly lose internet access after usage for some time. I've determined [but not limited it to] that the computer heating is causing the computer to automatically disable the connections. I've looked at the Drivers and have found that one of the Drivers disables itself and will not re-enable when I try to enable it again. When I try to reboot, it stalls on the Shutting Down screen indefinitely [I must force restart].
INTEL(R) 82577LM Gigabit Network Connection
INTEL(R) Centrino Advanced-N 6200 AGN
I've checked the BIOS, but I haven't found much of anything. After tampering for a while with it, I received a BSOD. After trying to boot it back up, I got the "a disk read error has occurred" screen and had to send it in... at which point they reinstalled the OS, wiped my hard drive, and sent it back.
Getting Network Connections / Adapters Verification?
May 28, 2012My Dell Laptop is connected to Wildbue via LAN connection to Broadband. January or February I connected Belkin Router to obtain Wi-Fi access for other laptops, Cell and PS3, Everything seemed to be working fine. I tried to disconnect the Dell in order to use it via Wi-Fi. This caused problems when my sons laptop lost connection. My guess was that it was actually routed through the Dell via network. Anyway, as I was working to network all correctly. My sons friend decided that he couldn't wait for internet and forced another laptop to login to internet. In the process, it appeared that he changed by router password so that I could not access it. Being a beginner when it comes to network connections, etc., I spent alot of time trying to correct the Belkin Router. I finally disconnected the router and attempted to remove all detail on my Dell. I am sure that my adapter information is not completely accurate. Or so it appears. Note that I do have LAN internet connection and I can search for wireless access. If necessary, I will reinstall the Belkin Router since it is my understanding that it is needed for Wi-Fi access to my internet provider connected via Broadband modem.
I am sure that there will be corrections. I am sure that there is more that will need to be done in order to provide access to other laptops and cells. At this time, I am getting internet on my main laptop that is connected via LAN connection. However, I am having problems understanding adapters for wireless connects.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsPenis>IPCONFIG/ALL
Windows IP Configuration
[code]...