Network Unplugged Message Even Though It's Plugged In?
Nov 26, 2012
I just recently bought a new HP Envy m6 laptop that's not even close to a week old yet and I've run into problems with the wired connection. I have two different belkin ethernet cable cords to use and neither of them seem to be connecting whenever I plug them into the ethernet socket on my laptop. I've tried uninstalling the network adapters and updating the drivers. None of that seemed to have solved my problem so far.
Is there anything that I can do to solve this problem? I would be fine with the wireless connection that I'm currently using if it didn't fluctuate so horribly. I live in an apartment complex that provides internet access to me so I don't know what company they are using nor the router that is providing me with the wireless connection. I will be checking in with the management to see if it's not a problem with their internet tomorrow.
As for the network adapter itself, I have a Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter and a Realtek PCIe GBE Family Controller. I'm assuming the Realtek adapter is the one that deals with wired connections. I'm currently running Windows 8 on the laptop.
View 3 Replies
ADVERTISEMENT
May 22, 2011
Same problem ' network cable unplugged' even if it is physically connected. I have sony vaio pczim series with win 2000 xp home edition with a broadband (cpe adsl2+ type) connection. While everything working fine for past two years, suddenly after a thunderstorm night, I noticed the network connection failure with the message. I checked the router, cable and the same are working fine with other hp laptop. Even the vaio is running with the same router while usb port is used and even the wireless and bluetooth are fine, but network with ethernet cable connection does not.
View 1 Replies
View Related
Aug 6, 2012
I have a Linksys WRT160N conencted to a pc, Windows Vista I can connect it to my ipod but after a few hours or so, it disconnects and I can get to reconnect again.
"Unable to connect to network "........"
View 4 Replies
View Related
Apr 12, 2011
Can't log on to computer running win xp sp3. I'm getting message that ethernet cable is unplugged but it's not unplugged. The modem/router was installed by Verizon (for FIOS connection) in February 2011. Internet was working fine until a couple of days ago. I have looked at other posts on this issue but have found nothing that would solve the problem. My old dial-up modem was still installed in the computer and had a question mark on it in device manager so I removed it. I thought maybe there was an IRQ conflict as the modem used to use IRQ 11 and the network card (linksys) uses that sometimes as well as IRQ 10 but that didn't work.
View 19 Replies
View Related
Jan 3, 2012
Ethernet cable plugged in but get message "no connectivity plub in the cable" This is after I upgraded my desk top from XP to vista home premium. I've checked my drive (via rhine11) it is working.
View 1 Replies
View Related
Sep 10, 2011
i have installed linksys pci adapter with speed wmp54gs. i try and turn it on and it will not show any devices and it will not let me click on rescan the the only thing that highlights is exit when you open!
View 3 Replies
View Related
Sep 13, 2012
I am running an ethernet cord from my xbox 360 to my Acer Aspire TimelineX 3820TG-3022 Laptop Computer. I am attempting to run ICS in order to share the connection to my xbox. The problem comes when I attempt to plug in my ethernet cord to the computer, and nothing happens.
Here is a screenshot of what the port says / my network adapter setup: 33a7c93a4c607756f9219a95a7207a7d.png It's a Atheros AR8151 PCI-E Gigabit Ethernet
I have tried sharing the connection to my xbox via another laptop, and it has worked. Power saving mode is disabled in the port in the device manager, and I have no clue what is going on.
View 2 Replies
View Related
Mar 26, 2011
I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.
View 2 Replies
View Related
Oct 10, 2012
I plug the Lenovo in to the Ethernet cable in my office, get link & data transfer lights, connect to the internet,everything works.Bring it out to different office (it's replacing an old XP machine, which connects on the cable I'm about to mention)Plug it in to ethernet, no lights, Network Cable is Unplugged.Plug cable back into old XP machine. It connects.
Bring out a Win7 Home Premium SP1 laptop. It connects.Plug back into Idea center, nothing. Drag idea centre back into my office. It works again.The Idea centre is new, so it's never worked on this area before. Also, I have 3, and they're behaving identically. ALSO, sometimes when I plug in the Ethernet cable the green and yellow indicator lights will blink once at me, and then never again.
The cable's good, works with 2 other machines. The port/NIC card is good, works in my office, the only difference between the two locations is that I have an extra router in my office that I don't have in the office the Lenovo is going in, so it MUST be something in the settings, but I can't tell what's different between the machines that work and the Lenovo.
View 5 Replies
View Related
Apr 11, 2011
Windows 7 Home Premium Service Pack 1 RealtekPCIe GBE Family Controller With no apparent change in software or configuration, I am getting the 'Network cable unplugged' error. The cable connects another PC just fine so both the cable and router are OK.
View 4 Replies
View Related
Nov 22, 2011
So here's a fresh spin (and not in a good way) on the seemingly common port-flapping issue, where a windows vista/7 machine's ethernet port vacillates between "enabling, identifying,network cable unplugged." I've tried the fixes I've seen around, like forcing the speed to 10 or 100Mb duplex,etc. But I think the problem goes deeper than that -or drivers or faulty NICs. Its acting like it's in the cabling. . . but not. Any advice would be welcome.Just switched from one DSL provider (Bell) to another (Teksavvy). Connected via a dry loop. When the Bell tech first set it up a year ago, he did it like this: Patch cord frome the Bell 2Wire modem/router combo to a female coupler. Female coupler attached to cat5 cable running about 25/30 feet along baseboards around the corner to another female coupler. Patch cord from female coupler to NIC in the back of my box. This worked fine. New set up with Tek savvy is as follows: DSL modem via patch cord to (wireless) D-Link router. D-link router connected to computer by same aforementioned setup. This results in the port-flapping named in the title of this message, on the hard line only. Any change in my computer was ruled out by connecting a brand new, never been connected laptop and the same terminal as my computer. Results in port flapping. The same laptop connected to the router by just the patch cord results in a perfect connection. I've tried moving the patch cords around, it doesn't change the results, so they're fine. I have no way of testing this long stretch of installed cable in the middle, with the couplers on it, since I don't have an equal length cable to try out anywhere, but I'd be surprised if that just died after a year's use exactly when I connected new hardware to the other end of it. Running windows 7 with a RealTek NIC on my box. D-Link router (will check the model later, at work at the moment), and TP-Link DSL modem. The system delivers wireless internet flawlessly.
View 2 Replies
View Related
Jun 29, 2011
Local area connection says there is a network cable unplugged. There are non unpluged. should I just leave it be? My computer is working fine
View 1 Replies
View Related
Jun 14, 2011
my modem is working, I have two computers on the router plus my wireless is working.I connected my cable that was going from the modem to the router directly to the computer and it still says "network cable unplugged"sis 900 based PCI fast internet?
View 3 Replies
View Related
Jun 20, 2011
I have a WRT54GS Linksys router. I have a personalized secured network (creags). My router is totally unplugged and disconnected, and I am still currently connected to my password protected network. Network authentication is set to WPA-PSK and Data encyription is set to TKIP. I cannot access my router's admin panel, even if I try 'admin' for just the password. I tried hard resetting my router (holding reset for >30sec, unplugging, plugging back in)-- nothing, and the network still shows up.
View 5 Replies
View Related
May 31, 2011
I want to connect my laptop and desktop. I have a LAN/Ethernet cable. When I joined the two, it says "Network cable is unplugged" on both the PC's. I have replaced my cable. The cable works good when I am using internet.
View 3 Replies
View Related
Aug 26, 2011
After running my malware anti-virus and removing all the virus, my Local Area Connection keeps saying network cable unplugged. I checked the network adapters and everything is fine. When I did an ipconfig, there's no ip address showing. I have Windows XP. I've tried almost everything and it's still not working.
View 1 Replies
View Related
Oct 31, 2011
Local Area Connection - Network Cable Unplugged I am using Professional 2000 and have a Linksys WRT54G Version 8.2 Wireless Router...have broadband connection through Brighthouse. My laptop works fine but my desk top computer keeps giving me this message.I have checked all the connections and even bought a new network cable to see if it was a hardware issue.
View 1 Replies
View Related
Apr 14, 2013
I have an Inspiron 17R SE 7720 that is about a half-year old. This problem has been occurring for as long as I can recall. I'm running Windows 8, but this problem was identical with Windows 7.
My Ethernet adapter, a Realtek 10/100, works on boot-up. At some random point it stops working. It could be days later, it could be after waking up, it could be within an hour of a boot without sleep. "Network Connections" shows the adapter as enabled but unplugged. I can correct the problem by disabling the adapter and then re-enabling it, but that only works maybe a couple of times in a row. In the latest instance (moments ago), I right-clicked the adapter to disable it, and then right-clicked to enable it again. Normally the adapter would then show the adapter as enabled and the cable connected. When things really go wrong, a window pops up that first says "Enabling..." and then "Enabled", but it is still grayed out and not enabled. The only solution I have is to reboot the machine.
View 3 Replies
View Related
Feb 6, 2011
I have a Lynksys WRT600N. I had DD-WRT on it and it was working great for about a year. One day I changed some minor settings like wireless signal type, reboot it and it's gone. I can not access it from my computer. The network adapter shows "cable unplugged". The lights on the front come on, but I can't get anywhere with it.
I've done all the resets I know how to do, including the 30/30/30 and leaving it unplugged for a few months.
View 4 Replies
View Related
Apr 9, 2013
I have been playing on a laptop for the last one and a half year without any problems with the internet. I have never had any lag and a steady ping around 20. On my laptop I was connected to the internet both wireless and with a cable because it tend to lag if I didnt have the network cable plugged in.And yesterday I got my new stationary PC, everything is working amazing but its just one problem. My ping goes skyhigh! On this PC I dont have any wireless connection, only a network cable.I have had this lag now since I got my now computer and its pretty frustrating. On this new computer I have a new anti-virus program (norton) that I am not that familiar with since I used Avira for years so I am not sure if the anti virus protection could be messing something up
View 2 Replies
View Related
Sep 9, 2012
I'm running Cicso AnyConnect Secure Mobility Client v3.0.07059 for work. Attached is a sceenshot of my network connections. I'm currently hardwired on my network connection and the Cisco VPN is a virtual adapter but is shows "network cable unplugged."
View 12 Replies
View Related
Aug 18, 2012
I have a dell desktop that uses Windows XP. Today I was cleaning out some unwanted programs that I never use and just take up space. But I don't know if I deleted something that I shouldn't have, or what happened but I am now unable to use my wireless internet. It says that a "network cable is unplugged". I have checked my modem and it is working fine. My brother is receiving internet in is laptop.
View 3 Replies
View Related
Mar 7, 2013
I just had recently replaced my Power Jack which had the ethernet port with it. Ever since I replaced it my Local Network Connection would give me an error (Network Cable Unplugged).
View 1 Replies
View Related
Jan 2, 2012
I realise many people are having this issue and there any lots of threads about it all, which i have spent hours looking through forums for answers but I am not that computer savy to understand it all...Haven't really come accross the same scenerio as i am having, so here it is: Just brought a Sony Vaio Laptop running Win 7 home Premium. Have a desktop computer running xp which is connected to modem and router...Am running a D-link DSL-502T and Linksys wireless-G broadband Router, model :WRT54G.My issue is i can connect to the wireless network through the laptop but when i switch the wireless switch on the laptop every few minutes the desktop PC will drop the connection and display network cable unplugged, then goes back and fourth connecting and disconnecting every few minutes....as soon as i flick wireless switch off on laptop all is fine again.....wireless works as have another laptop running windows 7 pro and can connect mobile phone through wireless and ipad etc...I have had the internet load web pages but connection doesnt stay on...Does the same thing when i try connecting directly using network cable.
View 3 Replies
View Related
Nov 20, 2011
I can connect to my router but not to Internet, it seams that ADSL line "disconnects" my LAN/WLAN this issue is with Inalambrico 6867R router an other router, TP-Link is working great
View 1 Replies
View Related
Aug 10, 2012
I have an acer aspire 5552 laptop that wont connect to the internet. When I tried troubleshooting I get the message "network cable not properly plugged in or may be broken". When I go through the control panel/system devices/network adapter the only thing that shows is pdanet. Right now the only way I can connect is through my cell phone using pdanet. How can I get my network adapters to show back up?
View 1 Replies
View Related
Apr 22, 2012
On the basement level, and on level 2, I have in wall junction boxes where the Cat5E Ethernet wires come together. There are 6 lines that go from the level 2 box to 6 wall jacks on levels 2 and 3. There are also 6 lines that go from the basement box to 6 wall jacks in the basement and on level 1. There is also a Cat5E line running between the two boxes.I have wired all these plugs on both ends with T568B standard, and in each box they go into a patch panel. I have used a cable tester to test and make sure all these plugs are properly wired. I have also tested individual computers hardwired linked through to my router (without going through switches) and confirmed that they work that way, so I'm pretty sure I've wired it correctly.
At the second floor box, I have an AT&T 2Wire wifi router and modem, with AT&T Uverse service. I also have a monoprice Ethernet switch. In the basement box, I have another monoprice Ethernet switch (link to the type of switches I have is below). The switches are connected together via the Cat5E that runs between the boxes, and the second floor switch is connected to a free port on the back of the AT&T 2Wire Uverse wifi router.These wall plugs are not all currently used. In fact the problem I describe below occurs even if nothing is plugged into the wall plates.My problem is: when I hook up everything, so my wifi router is wired to the first switch, which is in turn wired to the 6 wall plugs upstairs as well as to the switch in the basement, and that basement switch is in turn wired to the 6 wall plates downstairs... at that point when I plug it in, my wifi stops working. Basically, whenever my router is plugged into this hard wired network, the wifi stops working. When I unplug the network, the wifi comes back (I usually reset it, not certain if it would come back just from waiting).
Interestingly, it doesn't necessarily stop working if most or all of the plugs are removed so the network is not connected (for example, if I just go through one plug instead of all of them)Does a network of wired Ethernet, even if not plugged into anything, cause some sort of a load or drain on the router that could make it stop working?
View 1 Replies
View Related
Feb 25, 2012
My internet service grinds to all but a halt as soon as I plug in the ethernet cable to my desktop. Nothing is running in the background (that I can determine). Nothing is spamming data up or down (that I can determine). I get 40ms ping and 12Mbps downloads on every device I have until I plug in my big boy; then all the speeds come crashing down to 600ms ping and 0.9-1.4Mbps downloads (including the desktop, I have not been able to play SWTOR for weeks now). It's not the provider, (I thought it was) but I switched from Time Warner to AT&T with the exact same results. ASUS P8P67 Pro; I've had funky issues with USB ports and one SATA port died. Other friends suggest I may have an awful bug and I need to wipe and start over. I wouldn't mind doing that, but I don't have a windows recovery disk (my copy is legitimate).
Mobo-as listed.
CPU- i5-2500k stock, not clocked
RAM- 16GB G.Skill Ripjaws X DDR3 1600
View 5 Replies
View Related
Oct 8, 2011
I am looking for a way to send messages over my open network just like you wanted to. Can't seem to find an answer so far on line.
View 1 Replies
View Related
Jul 8, 2012
I was trying to connect my computers on a home network so that I can access either one via the other.When I try however I get the message:
"***-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
long failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a police restriction has been enforced.
That is the message from computer 1 to computer 2.
Computer 2 gives me the message:
Windows cannot access \***-PC
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
View 2 Replies
View Related
Jul 29, 2012
It did work ok but not now.Even after I put the setup disc into it, it does not show that it has recognised the router. I can only get it to work by using an ethernet cable. I tried to install my router onto it and it came up with a message saying it had "two network adapters, please click on one of them" or words to that effect. It didn't show anything to click onAlso she has recently bought a new desktop computer (Windows 7) and when I was looking into the routers settings it is still showing her name of the old PC she has scapped in the Network. Therefore on the BASIC NETWORK INFORMATION screen it says Network 2. I know this is probably not important but if she ever buys a new PC in the future it will show Network 3So what can I do to get rid of the old computer name on the router settings?
View 1 Replies
View Related
Feb 20, 2011
i am attaching the image which i recieved last night when i was assigning the IP but i got the error message which does not resembel to IP conflict error messsage
View 1 Replies
View Related
Jan 23, 2012
I have a Asus EeePC SeaShell 1005HA-H and i have a LINKSY ROUTER in my home. I recently been having problems with my wireless internet. I know it isnt the router because i have went to my boyfriends house and my laptop usually automatically connects to his internet and the same message continues to show up "Acquiring Network Address message". I try to repair the network and a error comes up. Then i went to check the firewall settings and the firewall is tured off.
View 1 Replies
View Related
