Ethernet cable plugged in but get message "no connectivity plub in the cable" This is after I upgraded my desk top from XP to vista home premium. I've checked my drive (via rhine11) it is working.
View 1 Replies I've had this modem set up for over 6 months and this just happened out of the blue. I had no connection to the internet, and the lights on LAN 1 and 3 were lit (only LAN 1 is in use.) I think I went about this the wrong way because now the LAN lights won't light up at all, and the internet light is always yellow. I know it's not the ISP because well I'm writing this post with my modem plugged directly into the PC.
When I try to reinstall the router using the CD I get an error message stating that the Ethernet cable probably isn't plugged in, although it is, as I followed each step exactly.
Now when I try to plug in the PC to the router I can't access the router webpage, and device manager is showing an Ethernet controller with a yellow exclamation mark under other devices. I don't even know where to start.
HW: C1
FW: I resetted the modem in an attempt to get this working again, so I imagine it's at the default now. Besides I can't access the router page anyways.
Region: NA - Canada
Wired Connection
Factory reset: Yes
ISP: Shaw (Cable)
Modem: Motorolas SB5102 - no built in router
I've got a wireless adapter for my desktop and thats what i've been using for years to connect, but now i'm am trying to get a more reliable connection by having the ethernet cable plugged in. Problem is, as soon as I plug it in the whole computer gets extreamly sluggish or sometimes freezes up completely. If I am very patient, I can very slowly do something things. If I open the browser, it probably takes a minute for it to load. Opening the control panel, the window pops-up but none of the icons will appear until it times out. And trying to use the network icons on the taskbar to get into network settings is impossible. Weird thing is as soon as I unplug it and turn the wifi back on, the PC starts responding super quick again within seconds.
View 9 Replies View RelatedCompaq Evo W4000 with XP professional.Comp works fine when no ethernet cable plugged in - after 10 secs of plugging it in - it freezes Have run malware bytes and combofix already - no change.Disabled everything in startup menu and non Microsoft services Works OK in SAFE MODE with networking though
View 17 Replies View RelatedThis has been driving me absolutely crazy but I am glad to have found the source of it. Over the past 4-5 weeks ever since i built my new computer, my computer has always had this wierd high pitch noise. I dont know if its coil whine or not, but the sound signature is def not the same as the coil whine that comes from my 7970 card. It sounds more digital.
What could be the cause of this? And what would the remedy be? My ethernet cable is approx 60 ft so it will be a pain in the ass to replace. Or buy another NIC?
edit: forgot to mention....the noise is constant. Not intermittent with usage. No amount of load or idle on the network changes the noise.
Can't log on to computer running win xp sp3. I'm getting message that ethernet cable is unplugged but it's not unplugged. The modem/router was installed by Verizon (for FIOS connection) in February 2011. Internet was working fine until a couple of days ago. I have looked at other posts on this issue but have found nothing that would solve the problem. My old dial-up modem was still installed in the computer and had a question mark on it in device manager so I removed it. I thought maybe there was an IRQ conflict as the modem used to use IRQ 11 and the network card (linksys) uses that sometimes as well as IRQ 10 but that didn't work.
View 19 Replies View RelatedI just recently bought a new HP Envy m6 laptop that's not even close to a week old yet and I've run into problems with the wired connection. I have two different belkin ethernet cable cords to use and neither of them seem to be connecting whenever I plug them into the ethernet socket on my laptop. I've tried uninstalling the network adapters and updating the drivers. None of that seemed to have solved my problem so far.
Is there anything that I can do to solve this problem? I would be fine with the wireless connection that I'm currently using if it didn't fluctuate so horribly. I live in an apartment complex that provides internet access to me so I don't know what company they are using nor the router that is providing me with the wireless connection. I will be checking in with the management to see if it's not a problem with their internet tomorrow.
As for the network adapter itself, I have a Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter and a Realtek PCIe GBE Family Controller. I'm assuming the Realtek adapter is the one that deals with wired connections. I'm currently running Windows 8 on the laptop.
I have my internet coming from my DSL modem (of course) and running into my wireless router. Once it is in the router I can't get a connection, period. Not even through any of my router's ethernet ports. This wasn't the case until about 3 o'clock yesterday. If I unplug the cable from my wireless router and plug it directly into my computer it runs fine. If I run it through my Micro-Cell tower and into my computer it runs fine. But if I plug it into a router it won't work through Wi-Fi or Ethernet. I have tested the connections of all the ethernet cables I am using. Figuring it had to be a problem with my router (since it was working earlier and the connection only disappears when plugged into it) so I bought another, same problem. What else could it be? PS: I'm using both a MacBook Bro, a PC, a PS3, and a Nintendo 3DS and none get a signal from the wifi. I always keep the PC hardwired through the ethernet ports on the router and use the wireless for everything else
View 1 Replies View RelatedI have been playing on a laptop for the last one and a half year without any problems with the internet. I have never had any lag and a steady ping around 20. On my laptop I was connected to the internet both wireless and with a cable because it tend to lag if I didnt have the network cable plugged in.And yesterday I got my new stationary PC, everything is working amazing but its just one problem. My ping goes skyhigh! On this PC I dont have any wireless connection, only a network cable.I have had this lag now since I got my now computer and its pretty frustrating. On this new computer I have a new anti-virus program (norton) that I am not that familiar with since I used Avira for years so I am not sure if the anti virus protection could be messing something up
View 2 Replies View RelatedI have a problem concerning my Netgear XET1001 85 MBit/s Wall-Plugged Ethernet Adapter. My personal computer in my room is connected directly to our router and I'm getting arround 14-15Mbps download speeds. My parents computer is located in a different room and I bought them the Netgear Adapter thinking this was the most effective and simplest solution. Better than a Wifi-Adapter. I cost me quite a lot too to be honest. The problem is my parents are getting speeds of 0.05Mbps and the browser often doesn't even load the pages completely. To me it seems like the data can only travel through the thing very hardly if at all.
We thought this might have to do with the age and RAM of our computer. (512MB of RAM) So we bought a new one a couple of days ago. Turns out: nothing has changed.
The Wall-Pluggs are connected directly to the outlet by the way. I'm trying to give you the most amount of information I can think of so one more thing might be important. Yesterday I brought my parent's PC into my room, connected it to the Wall-Plugg and got speeds of 5Mbps. Although this is better, it's not what I bought this thing for. Even a WIFI connection would be faster would'nt it?
My internet service grinds to all but a halt as soon as I plug in the ethernet cable to my desktop. Nothing is running in the background (that I can determine). Nothing is spamming data up or down (that I can determine). I get 40ms ping and 12Mbps downloads on every device I have until I plug in my big boy; then all the speeds come crashing down to 600ms ping and 0.9-1.4Mbps downloads (including the desktop, I have not been able to play SWTOR for weeks now). It's not the provider, (I thought it was) but I switched from Time Warner to AT&T with the exact same results. ASUS P8P67 Pro; I've had funky issues with USB ports and one SATA port died. Other friends suggest I may have an awful bug and I need to wipe and start over. I wouldn't mind doing that, but I don't have a windows recovery disk (my copy is legitimate).
Mobo-as listed.
CPU- i5-2500k stock, not clocked
RAM- 16GB G.Skill Ripjaws X DDR3 1600
Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.
View 1 Replies View RelatedI have an acer aspire 5552 laptop that wont connect to the internet. When I tried troubleshooting I get the message "network cable not properly plugged in or may be broken". When I go through the control panel/system devices/network adapter the only thing that shows is pdanet. Right now the only way I can connect is through my cell phone using pdanet. How can I get my network adapters to show back up?
View 1 Replies View RelatedI've just had talktalk installed and cant get internet unless I plugin cable is there a button on my keyboard I have to press .
View 1 Replies View Relatedmalcious url blocked messages while using a enternet browsing.
View 2 Replies View RelatedI've got a ASUS AC66 router plugged into my Comcast cable modem (regular dumb modem), it's running the Merlin (OEM-modified) firmware.I've got a Netgear 3400 router flashed with DD-WRT (latest build), it's a replacement for another N router that died on me.
Anyways, I went to set client bridge like always. Main router is 192.168.1.1 so I set DD-WRT router as 192.168.1.2, set the wireless modes to client bridge with matching SSIDs for my 2.4/5GHz radios, input the correct security keys on the security page (AES), then I put the router in router mode (from gateway) Basically, I followed the instructions on DD-WRT's website, which worked perfectly until the other router died.
This time around as soon as the DD-WRT router reboots with its bridge information saved it immediately causes some sort of conflict on my network and kills the internet and all network connections. All devices lose their IP address. It's like the DD-WRT router is somehow shutting down the network and my default router.
My broadband works fine on my laptop but my Wi-Fi will not connect,it keep on saying "not connected"
View 3 Replies View Relatedwhat can be done to finish loading web page?
View 1 Replies View RelatedI've just bought a new Dell laptop (Inspiron N5110) and have Windows 7 installed on it. Things happened when my laptop get viruses and I have to re-install everything all over again. After successfully installing Windows, I installed the drivers for my laptop.
The problem is:
I have an internet connection in my house: wired and wireless.
I can connect the wifi zone from my laptop normally. It's ok. But when i plugged in the DSL Cable, the internet connection is always disconnect and then auto-connect again and again :(
The map of internet connection in my house: ISP -> Modem -> Wifi Router -> Wired + Wireless
i have a new Acer Aspire 5742Z with standard Windows 7 OEM OS from supplier.I'm trying to connect wireless to my network and i am getting a "limited connectivity" message.
- the network itself - have 10+ machines on the network.
- hardware - I've tried various cards internal and external.the LAN was also having issues until I disabled the QoS on the adaptor, however this does not facilitate the WLAN.I think it must be software issues and was wondering about Acers software as I know Toshiba's "config free" can interfere with WLAN. or there may be more i need to change to the adapter settings.
I am getting a message "system standby.."Print Spooler"is preventing the machine from entering standby... try stopping the service?
View 2 Replies View RelatedIn windows server 2008 i got the mess "limited connectivity" after one hour (approx)
View 2 Replies View RelatedMy friend has just got a laptop and when she is at my place it shows that my computer is nearby but message says "Windows was unable to find a certificate to log in to network".
View 6 Replies View RelatedI recieve 0X800CCC0F error message when trying to download emails with attachments. My ISP is BT. BT say they cant fix it on my computer but many people are having this problem. They say their technicians are trying to fix it presumbably on the servers.
View 1 Replies View RelatedLimited OR No Connectivity.
View 1 Replies View Relatedit is all about I P address, which is conflict to another computer I P address. so, there is an icon appearing that is no connection limited connectivity.
View 2 Replies View RelatedThis is the initial time to set up a new DSL provider's modem with their tech support. TCP/IP auto obtain IP address does not work (LAN status is 'limited or no connectivity'), entered static ip/dns, then LAN status is 'connected'. However, can't access internet (...DNS lookup failed...). After several calls over 5 hours w/ tech support, now only works using a manual broadband connection when cable physically connects modem and pc. Tried once to add wireless router(reset modem, connect and cold boot all 3 devices...) while the tech supporter was on phone, but broadband connection won't work any more. So the service rep said I had connection and could access internet, the router is not his issue.Is this the new modem problem or the provider server issue. I have had SBC DSL for years before swith to the new provider, everything worked fine. I also tried cable connect to a different laptop, got the same problem. Both PCs can still connect to my neibauer's wireless router no problem.
View 3 Replies View RelatedI have an older PC using cable internet to connect. It works fine. There is no router, no other PCs, no network.I built a new PC. I installed WinXP Pro SP2 from a USB drive. I also installed the latest version of the mobo drivers including those for the Realtek NIC. When I swap the cat5 cable from that goes between the cable modem and my old PC to the new PC, the new PC does not connect to the internet. After a reboot the IP address is a 169.254.x.y address. Here's what I have tried so far to fix the problem.
View 2 Replies View RelatedI am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.
View 9 Replies View RelatedTOSHIBA LAPTOP WITH WINDOW 7 - The LAN port on my laptop does not show a light when the cable is plugged in?
View 1 Replies View RelatedI connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.
View 2 Replies View RelatedI have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
Same problem ' network cable unplugged' even if it is physically connected. I have sony vaio pczim series with win 2000 xp home edition with a broadband (cpe adsl2+ type) connection. While everything working fine for past two years, suddenly after a thunderstorm night, I noticed the network connection failure with the message. I checked the router, cable and the same are working fine with other hp laptop. Even the vaio is running with the same router while usb port is used and even the wireless and bluetooth are fine, but network with ethernet cable connection does not.
View 1 Replies View Related