ASUS AC66 Router Plugged Into Comcast Cable Modem

May 27, 2013

I've got a ASUS AC66 router plugged into my Comcast cable modem (regular dumb modem), it's running the Merlin (OEM-modified) firmware.I've got a Netgear 3400 router flashed with DD-WRT (latest build), it's a replacement for another N router that died on me.

Anyways, I went to set client bridge like always. Main router is 192.168.1.1 so I set DD-WRT router as 192.168.1.2, set the wireless modes to client bridge with matching SSIDs for my 2.4/5GHz radios, input the correct security keys on the security page (AES), then I put the router in router mode (from gateway) Basically, I followed the instructions on DD-WRT's website, which worked perfectly until the other router died.

This time around as soon as the DD-WRT router reboots with its bridge information saved it immediately causes some sort of conflict on my network and kills the internet and all network connections. All devices lose their IP address. It's like the DD-WRT router is somehow shutting down the network and my default router.

View 2 Replies

Linksys Wireless Router :: WRT610n 2 Networks From 1 Comcast ISP Cable Modem

Jan 12, 2010

I have a need to have 2 seperate networks from my comcast cable modem.I was hoping to plug a 5 port hub into the cable modem and then plug both the wrt610n and the wrt54g into the hub. Seem that only one of the routers will get an ip assigned from Comcast.Is there a way to have one ISP cable modem and create two different home networks with the two linksys routers, thus two separate independent networks?

-Network 1: public household use and family (Jane's wireless laptop, household PC's etc).

-Network 2: private household/company use and separate from the public family network (company wireless laptop/company PC, un-secure media server).

View 7 Replies View Related

Cable Modem From Comcast - Unable To Add Additional Port?

Jul 24, 2012

Our small business just moved into a new building and I am in charge of setting up the network infrastructure. I am not new to computers or networking but I have never had to deal with this set up before.

Our current set up.We have a cable modem from comcast that has the Coax cable connected to it.The modem has 4 ports on it. The ports are connected to a built in 24 port switch that was already in the building. The switch has it's ports connected to outlets in the walls. Currently we have 4 computers on our network and since the cable modem had 4 ports it worked fine.

What we need? We will have another person join our office so I will need to activate one additional port on the switch that already exists. However, since all 4 ports on the modem are already taken, I have no way to add an additional port. They also want us to get wifi in the building.How I think I have to solve the problem (most likely wrong).I have to get another switch (like 8 port) and connect the cable modem to the switch using a cross over cable (if there is no designated internet port). Since I have the modem connected to the switch, I will have to move the 3 remaining connections to the switch.

Then I connect the 4 remaining ports on the switch to the existing 24-port switch that is already there. I will use one of the outlets in the building to connect an AP for Wi-Fi for better signal. Currently the modem and switches are hidden in a closet away from the office space and would mess up the signal.

View 4 Replies View Related

D-Link DIR-615 :: Setup Two Wireless Networks On One Comcast Cable Modem?

Apr 7, 2013

We have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.

Here's the equipment I'm working with:

DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U

I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.