D-link Dir-655 :: Arris Docsys3 Modem From Comcast Which Has A Built In Wifi Router
Aug 17, 2012
I have an ARRIS Docsys3 modem from Comcast which has a built in WiFi router. I also have a DIR-655. The Modem is in my office and I have a 100' Ethernet cable running through my attic to my front room where the dir-655 is located.
I use the DIR for WiFi as well I have it connected to my TV and Xbox.I use the ARRIS Modem for WiFi as well I have it connected to another Xbox and a Desktop computer.I want to have everything on 1 network, Dir-655 uses IP address 192.168.0.1-100 and the ARRIS uses ranges 10.0.0.1-100. I want to be able to connect to the dir-655 and have the IP for that connection join up with the 10.0.0... network so that I will be able to transfer files freely throughout the network.
I want everything on one network. Right now when I connect a laptop to the DIR-655, I can not access the printer that is connected to the Desktop on the ARRIS modem. I have to connect to the ARRIS modems WiFi to then use the printer on the desktop.Likewise, I want to use the media extender on the Xbox connected to the DIR-655 with the Desktop connected the the ARRIS modem, but I can not because of the to different networks.
View 5 Replies
ADVERTISEMENT
Apr 25, 2013
Currently have a linksys wrt54gs connected to an Arris TG852G/CT. Currently getting poor speed via WIFI for Comcast Xfinity service. The Arris modem is connected directly to the Linksys Wireless Broadband Router via Ethernet. It lists the linksys broadband router as unknown device and does need utilize the 54 mb/s g standard available on this device. I have updated the firmware to 1.52, reseted the Arris gateway to factory defaults, and reset the linksys to factory defaults as well. The IP address is 192.168.1.1 for the linksys/ 10.0.0.1 for the Arris gateway.How do I improve connectivity between the Arris Gateway and the LinkSys broadband router (model WRT54GS ver 6.0)
View 8 Replies
View Related
Apr 29, 2012
Can I connect blu ray player to motorola cable box via Ethernet port? My blu ray player won't work with wifi built-in router.
View 1 Replies
View Related
Jan 17, 2012
Just got home from the Comcast store with a $7 rented modem just to last me until I do research and purchase one. I realize that this modem has only one Ethernet port with no WiFi support so I have another PC and a laptop sitting idle because there's no internet access. Did a quick search using Comcast's authorized modem's list and all of them only have a single Ethernet port and no WiFi. Is there a modem with multiple Ethernet ports with built in WiFi? I am getting almost 20mbps with a download speed of 4mb/s which is a HUGE improvement over my ATT DSL service that I've had since forever at 3mbps with a download speed of 300kb/s. I have no idea what technical specifications to look for in a cable modem to get 100% of full potential speed from my service without disconnects or other various problems.
I have a ATT U-Verse router sitting here right now, I am wondering if I can somehow connect it to my Comcast modem. I tried to connect the ATT router into Comcast modem via Ethernet cable, but I couldn't get past the "Your DSL service is unavailable" in the browser, but in my desktop system tray, it shows I am connected to the internet. If I could use this router, I would rather spend money on a modem instead of getting a combo.
View 4 Replies
View Related
May 28, 2010
Life was great with my DIR-615 and Motorola Surf Board SB-5100 cable modem, but my D-Link refuses to recognize the Internet signal from the Thomson. The Comcast guy spent an hour trying to get it to work, but I'm stuck watching MLB.tv on a 24" monitor in a stiff office chair in my study, instead of on a 47" LCD in my living room. How can I force the DIR-615 to accept the Thomson ACG905? If you advise me to check settings or manually change them, please do not "assume" that I know how to access those settings.
View 6 Replies
View Related
Apr 7, 2013
We have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.
Here's the equipment I'm working with:
DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U
I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.
View 1 Replies
View Related
Jun 14, 2011
Do I need to change myArris-TM502G router when changing to a Linksys E4200 Dual-Band modem
View 2 Replies
View Related
Mar 7, 2007
I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them.
View 9 Replies
View Related
Feb 18, 2013
i have an ARRIS TM822 cable modem provided by comcast, in addition i have a linksys e3000 wireless router. what i am trying to accomplish is to bridge the cable modem over to the router. i messaged comcast about this issue and i have attempted what they told me to do, but im not getting any where.
View 1 Replies
View Related
Jan 21, 2013
I cannot connect to the WiFi router, an all-in-one modem+router provided by my ISP. Now, I run an Ethernet cord from the router to my computer: the computer works just fine. As of a day ago, though, none of the home's Apple devices will connect to the network, despite reboots, password retypes, and shouting at them. Each device (two phones and an ipad) can identify my network, but they cannot join. Additionally, there is an old laptop that cannot connect anymore.
View 7 Replies
View Related
Jun 28, 2011
How to bypass router to modem when the router has a built in modem? So my wireless router has a modem built into it, or is it the other way around: modem with built in router. I'm not sure...But anyway, because I am having such difficulties with the ps3 online, I have been told by many people to try bypassing the router straight to the modem.
View 2 Replies
View Related
Aug 6, 2011
I am having a problem with my newly purchased Linksys E1000 router, I am having terribly slow network speeds while on that network.
Here are my network speeds with The e1000: (wireless) And here are the speeds with my old wrt54g: (Wireless) Here are the results directly hooked up to the modem: (wired)
I've tried setting the MTU to 1500, did a RMA with Linksys to see if it was a hardware problem, did a firmware update to the e1000, disabled DHCP and SPI, reseted my router and my modem....none of those things have worked
My ISP is comcast and I have a Arris TM502G modem
View 4 Replies
View Related
Jun 28, 2012
I've been getting internet from a SMC8014WN Wireless Cable Modem gateway and I've been having sporadic connection issues ever since. I use Wireless USB Adapters on my own computer to connect to it from across a hallway and into another room and the connectivity is not very consistent. [URL]No matter what adapter I use (I have many) I sometimes get "now connected" messages and when I'm playing games like TF2 my connection either spikes, or drops and comes back (I'll get DC warnings and the game will freeze, and then come back in)
View 2 Replies
View Related
Feb 15, 2012
I hav a laptop conecteted to the internet with comcast service and a netgear wireless router that works fine. but bought a desktop and when i hook it to the router i get no internet. im running windows 7 ultimate on both machines. i am gettin a thing saying unidentified network in my network settings and i called comcast whent through resetting the modem and router with them and nothing then they tell me i have to pay them to run another machine of of my router this is ridiculas i have the machine pluged into the port on the router with anethernet cable everything is hooked up right i know this im pretty computer savy as ive built many machines in the past.
View 1 Replies
View Related
Oct 21, 2012
I switched to xfinity and I really don't feel like renting their gateway for $7 dollars a month. Gateways are crap anyways. So do any of you know of a good router and modem that can be paired up to work well with xfinity and has good speed?
View 1 Replies
View Related
Apr 5, 2012
I have an arris modem from the ISP company and it works good, bat it is NO wireless model. So I have purchased arris WITH the wireless capability myself and ISP refused to support it so my guess that I need somehow to clone their old modem to my new one.
View 4 Replies
View Related
Jan 4, 2013
Today I got a new modem brought from Insight my ISP.
Modem: Arris TG862
Router: Cisco Linksys E1200
What happened is I connected to the modem's configuration page and turned off dhcp for all of the options because I wanted my router to do this, but after doing this and saving my settings, I can no longer connect to the internet or the modem no matter what I try. I really don't want to call insight when they just brought the modem.
View 19 Replies
View Related
Sep 21, 2012
I bought this wonderful voice gateway off the internet from someone. So not sure if they ever used it with Comcast.So far I hatve had no internet once I plug it to the cable. I have asked Comcast tech for activating this device. However they say it is not supported and they have tried sending it the Activation signal but they say it fails. I can see all lights lit up and go green when I connect this device to the cable, is there a firmware upgrade for DPQ3925 ?
View 2 Replies
View Related
Jun 29, 2011
I have a comcast business class cable modem and am trying to connect it to my cisco 2821 to route only certain types of traffic.
View 3 Replies
View Related
May 27, 2013
I've got a ASUS AC66 router plugged into my Comcast cable modem (regular dumb modem), it's running the Merlin (OEM-modified) firmware.I've got a Netgear 3400 router flashed with DD-WRT (latest build), it's a replacement for another N router that died on me.
Anyways, I went to set client bridge like always. Main router is 192.168.1.1 so I set DD-WRT router as 192.168.1.2, set the wireless modes to client bridge with matching SSIDs for my 2.4/5GHz radios, input the correct security keys on the security page (AES), then I put the router in router mode (from gateway) Basically, I followed the instructions on DD-WRT's website, which worked perfectly until the other router died.
This time around as soon as the DD-WRT router reboots with its bridge information saved it immediately causes some sort of conflict on my network and kills the internet and all network connections. All devices lose their IP address. It's like the DD-WRT router is somehow shutting down the network and my default router.
View 2 Replies
View Related
Sep 9, 2012
My old modem from Roadrunner (Time Warner) died and the service man replaced it with a Arris TG852 modem/router. then my problems began. I would like to have the Arris modem act like a modem and not a router. The network governed by the DIR works fine but none of the clients can connect to the internet. Below are the steps I have tried.in both steps below, The DIR is connected to the Arris using the Ethernet not the Wan port.
1. I tried disabling DHCP on the Arris router and setting a static IP address for the DIR router. This worked for a bit and then quit. Some of the computers said there were duplicate IP addresses on the network. If fact the same IP address showed up in the DNS list of the Arris and the DIR routers.. even though the Arris router had DNS disabled.
2. After reading other forums. I enabled DHCP on the Arris and set it to passout IP address between 192.168.0.2 and 192.168.0.99. I then setup the DOR to pass out addresses between 192.168.0.100 and 192.168.0.200. then moved the DIR into the DMZ of the Arris. Still no access to the internet.
View 2 Replies
View Related
Feb 15, 2011
I've been trying to connect my laptop directly to my Arris modem with an ethernet cable to get on the internet, but for some reason every time I do I have "limited access" and can't get on the internet. I can only seem to get my laptop on the internet while the wireless router is connected to the modem and then either connecting wirelessly or by connecting my laptop to the wireless router with an ethernet cable.I want to connect to the internet without my wireless router, because someone was hacking our router and was apparently doing illegal downloads. We got a cease and desist letter that said our internet will be terminated if it happens again, so I want to connect to the internet without any wireless connections being set up.
View 3 Replies
View Related
Nov 22, 2012
I got a new modem from the cable company Arris TG862G. This is a wireless modem and I had them set everything up on their end which is now after 2 hours with them on the phone working fine. The problem I'm having is somewhere in my computer is my guess and their guys didn't know which way was up so i gave up on them fixing my issue. So here I am. I have a custom built computer that is using a Gigabyte mobo and has been working fine with the on board Ethernet card before now. I used to have the desktop plugged into an Arris modem via a Belkin router and this set up worked fine. I also took the current modem and plugged it into the Belkin N600 router and then to my computer and to my complete bewilderment it worked fine. I wanted to get rid of the router so I could see if I could get faster download speeds (That initial issue being on speed tests I get 50mb/s and on actual downloads I would only get 5mb/s).
I got it to work (I have no idea how) for about 20 minuets. When I restarted the computer it stopped working. I am now back to square one which is the desktop not even recognizing that there is a cord plugged in. I know the cord is fine and the ports are fine as well that isn't the issue. My laptop connected just fine to the Ethernet cord with no issue. I have uninstalled the Belkin software to see if that was the issue and no change. Everything wireless works just fine, it is just this Ethernet connection that is FUBARed, and again ONLY with the desktop.I am running Windows 7 ultimate. I am about to QQ and just deal with the 5mb/s downlods because that's not terrible but I got greedy.I was messing with the Ethernet wire some and it started picking up the router but never tried to connect to the internet, I'm going to try other wires but I don't think that's the issue.
OK so another update ladies and gents: my desktop has been on for about 40 minuets now and it is connected to the modem. I have done nothing to it that would cause this and it just randomly happened. Short of never turning my computer off again which would be hell on my power bill what can I do to fix this problem? On speedtest.net I'm only getting 30.48 Mb/s and as I said earlier I should be getting around 50mb/s (which is what I get on on the wireless laptop). I just restarted it and it wouldn't connect to the modem again.
View 6 Replies
View Related
Nov 27, 2011
My neighbor is using my Belkin Router the basic one and has comcast. We both use his internet and have had no problems until the past 3 days. He just got the home phone service from comcast and the phone line is setup through the modem. Ever since comcast came to his apartment and set this up the home phone service to his modem the router is connected but there is no internet access. What is going on and how can I fix this. He has an HP with windows Vista and I have a Toshiba Satellite L675 that has Windows 7 Home premium edition on it.
View 1 Replies
View Related
Jan 12, 2010
I have a need to have 2 seperate networks from my comcast cable modem.I was hoping to plug a 5 port hub into the cable modem and then plug both the wrt610n and the wrt54g into the hub. Seem that only one of the routers will get an ip assigned from Comcast.Is there a way to have one ISP cable modem and create two different home networks with the two linksys routers, thus two separate independent networks?
-Network 1: public household use and family (Jane's wireless laptop, household PC's etc).
-Network 2: private household/company use and separate from the public family network (company wireless laptop/company PC, un-secure media server).
View 7 Replies
View Related
Sep 25, 2012
First of all, this is how my connection looks like:
PC & Xbox 360 -> Router (Linksys WRT54GL with DD-WRT firmware) -> Modem (Arris TM602B) Everything is working just fine, except for every now and then (sometimes a few times per day), when my modem decides to "stop working" for a second or two. I do not know if it is exactly the modem, but i guess that it is.
What happens, is that for a second or two, all the lights on modem stop blinking or turns off, except "Power", "DS" and "US". Those lights stays turned on. After a second or two, all the lights continues working normally.
It would not even be that big of an issue, as i would not mind if my internet radio has stopped working for a second or if i had to wait a second before continuing with browsing the web, but it becomes an annoying issue, while i am playing video games on Xbox Live. This is what causes me to disconnect from an online game, even though, everything works normally after - until it happens again.
View 1 Replies
View Related
Aug 20, 2012
I just switched ISPs and received a new modem, unfortunately I can't seem to connect my laptop online with this. Everything else connects fine, but something is up with my computer, it connects fine wirelessly to the modem, it just doesn't have a proper internet connection.I'm running windows 7, the modem is an Arris TG862.
View 2 Replies
View Related
May 6, 2012
Connecting to the internet through my Arris Touchstone TM602G Telephony Modem phase 2 to my custom desktop.
View 3 Replies
View Related
Mar 23, 2011
Every day for the past week my Internet access goes down. I have a netgear router connected to Comcast modem. I have to reset the modem then the router constantly and it gets irritating. I called comcast and they say reset them. But why should I have to constantly reset.... Sometimes I just ignore it and it comes back up later... what is going on??
View 1 Replies
View Related
Aug 9, 2011
Comcast had us unplug our modem in order to upgrade to their new faster speed. now our wireless router won't work. We've reset the router twice. we can set up the wireless network but we cannot connect to it. The connection last for about 5 minutes and then we get an error, cannot read IP address. Comcast says it is not their problem and linksys says they can't assist either.
View 1 Replies
View Related
Aug 17, 2012
I am trying to figure out whats wrong with my parents apple airport router. Its connected into an Arris TM402P/110 cable modem. It randomly stops working, the network is there and shows up fine but you cant connect to it. It might work for a day or 2 and then just stops. I am trying to figure out if there is a configuration issue or the airport hardware is just failing. I am not sure where to start troubleshooting. The event log for the modem isnt much help, the following message shows up occasionally:
No Ranging Response received - T3 time-out
Whats interesting is my mom plugged her desktop right into the cable modem and then after plugging it back into the airport the wireless was working again. Is it possible there is a DHCP issue? If the hardware is failing what would be a good replacement for the airport?
View 2 Replies
View Related
Feb 25, 2013
I recently received my Arris modem from comcast and during the installation phase I kept looking for an option to change the wifi mode from b/g/n to n only as all my network adapters connecting via wireless are n types and I want the max speed available from the modem. At no time did the option come up to define. So I finished the set-up and eveyone is connected, albeit at 54 Mpbs.I have accessed the modem via 10.0.0.1 after set-up in search of another option where I can revise the wifi mode. No luck. Comcast gave me the backhand lob over to Arris and Arris followed through with an overhead smash at the net.
View 4 Replies
View Related
Feb 6, 2013
My router is a Dlink Model DI-624
My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.
View 1 Replies
View Related
