Broadband :: WinXP Pro SP2 - No Internet Connectivity
Jan 16, 2011
I have an older PC using cable internet to connect. It works fine. There is no router, no other PCs, no network.I built a new PC. I installed WinXP Pro SP2 from a USB drive. I also installed the latest version of the mobo drivers including those for the Realtek NIC. When I swap the cat5 cable from that goes between the cable modem and my old PC to the new PC, the new PC does not connect to the internet. After a reboot the IP address is a 169.254.x.y address. Here's what I have tried so far to fix the problem.
View 2 Replies
ADVERTISEMENT
Jul 16, 2012
I removed my computer from a domain to a workgroup,I then rebooted the pc and now it si asking me for a username and password.I can not access important information on the local drive.
View 1 Replies
View Related
May 20, 2012
I have an HP-MINI with an atom processor 1.6ghz and dual core according to device manager. It has 1 gb ram and no other issues. I can boot into Ubuntu and have everything work fine. It goes on line with no prodding on WAP after I enter the password as usual.
When I attempt to do this in winXP on the same exact computer, it comes up with the no connectivity issue. I have run ipconfig and here is the result: (btw I am sending this info from another computer)
Windows IP Configuration
Host Name . . . . . . . . . . . . : KEN_HP_MINI
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
[code]...
After I ran this see that Netbios over TcpIp was disabled. I am sure it is supposed to run in some kind of automatic mode or something as I recall.
View 8 Replies
View Related
Mar 30, 2013
it is all about I P address, which is conflict to another computer I P address. so, there is an icon appearing that is no connection limited connectivity.
View 2 Replies
View Related
Oct 19, 2011
Limited OR No Connectivity.
View 1 Replies
View Related
Aug 20, 2011
This is the initial time to set up a new DSL provider's modem with their tech support. TCP/IP auto obtain IP address does not work (LAN status is 'limited or no connectivity'), entered static ip/dns, then LAN status is 'connected'. However, can't access internet (...DNS lookup failed...). After several calls over 5 hours w/ tech support, now only works using a manual broadband connection when cable physically connects modem and pc. Tried once to add wireless router(reset modem, connect and cold boot all 3 devices...) while the tech supporter was on phone, but broadband connection won't work any more. So the service rep said I had connection and could access internet, the router is not his issue.Is this the new modem problem or the provider server issue. I have had SBC DSL for years before swith to the new provider, everything worked fine. I also tried cable connect to a different laptop, got the same problem. Both PCs can still connect to my neibauer's wireless router no problem.
View 3 Replies
View Related
Jan 3, 2012
Ethernet cable plugged in but get message "no connectivity plub in the cable" This is after I upgraded my desk top from XP to vista home premium. I've checked my drive (via rhine11) it is working.
View 1 Replies
View Related
Dec 19, 2012
Where can I get the correct drivers for an F5D7050B on a Windows XP Professional 64-bit machine?
View 1 Replies
View Related
Nov 29, 2009
find suitable WinXP wireless driver for dell vostro 1015.
I downloaded a WinXP driver for Dell Vostro 1015 from dell web site but it is not working.
When I try to install this driver, an error message apears. The message tells that ""QMI device is missing"".
View 6 Replies
View Related
May 21, 2011
My laptop is not connecting to the internet, I know that it is not a router problem as my mine PC and Notebook are connecting with no issues.I have removed all router devices as had an new once once it was last working.I tried this morning to set it up again without success. I have compared to setting with my pc and have found the difference is with the IPV6 connectivity.
View 6 Replies
View Related
May 27, 2011
I've searched the forums and found similar problems that relate to mine but after trying done of their solutions with no success I decided to make a new thread. This problem started 2 days ago with the same network I've been using for about 2 months.I'm running vista sp 1. I use google chrome and when I try to open a page it says unable to connect to proxy server. I changed the lan setting s (unchecked the box for using a proxy server for my lan) and now the page says the dns lookup failed.
View 1 Replies
View Related
Oct 25, 2011
We have netgear router and 3 laptops which were all working on the internet fine but one laptop has had a full recovery done on it and now won't connect it just says there is limited connectivity, what it could be as the net is still working through Ethernet and the other laptops through wireless. Its windows vista.
View 5 Replies
View Related
Oct 28, 2012
I currently have a 20MB down and 2MB internet. I have a Cisco Linksys E4200 with Firmware Version 1.0.05. We have a two bedroom apartment, one of the bedrooms is our office which is by the front door. We have the wireless router and our modem in the office. We have an apple TV in our living room that is connected to the wireless internet. Every time we get random times where the video output is very pixely and seems we are streaming shows/movies on a 56k modem.
View 1 Replies
View Related
Oct 24, 2012
I'm currently living in a shared house right now, and for our internet, the landlord has us on Virgin Media's basic package, which in theory should be netting us around 10mb (according to the lady that I spoke to on the phone from there anyway). It comes into the house via a cable, then goes into a modem, and then that modem is connected to a wireless router which pumps it out into the house for everyone (at least it tries to anyway - read on!). That's what I can make out from what I can see at least.
Now, when I connect my laptop to said router via a cable, the internet works fine, and doing speed tests, I get relatively consistent results around the 10mb mark that they should be. However, when I try to use the wireless with my laptop, even sat right next to the router, most of the time, the internet doesn't seem to work at all. Webpages just load indefinitely, or I get an error message saying that the connection was reset whilst the page was loading.
On rare ocassions where the wireless does work, and I run a speed test, then I'm lucky to see results close to 1mb, and in my wireless properties, the speed usually says something like 18mbps.
View 10 Replies
View Related
Aug 29, 2012
ISP : ShawPC >> SMC Modem/Router >> Netgear Router >> PS3 and Denon Stereo Receiver ( Both hardwired to Netgear Router), 2 Laptops and 2 Phones connected wireless- The reason I do not use the SMC as a router is because I was getting terrible wireless signal- When everything is working properly I am getting great speedsroblem : I keep losing internet connectivity. On the wireless devices I still have have great signal strength but no connectivity. I need to run netgear genie oripconfig/release/renew to get it back. It always comes back but this is annoying.It also does this on the PS3 and Denon which are hardwired to the router..as with the other ones if I reset the router or do a connection test on the PS3 it will fix it. Finds IP but no internet connectivity.My PC has also started to lose connectivity and I need to do a ip release/renew and it comes back fine.The fact that this is happeneing on my PC would lead me to believe that it may be an issue with the Modem/router. Are there some settings I need to change on it since I am only using it for modem purposes? I have disabled the wireless on it but I don't think that would be the issue anyways
View 14 Replies
View Related
May 26, 2011
Just recently my internet got slow, and when it got slow nothing worked. I can connect to the internet and get on skype and some websites but when i try downloading something it says No internet Connectivity Detected.
View 2 Replies
View Related
Jan 9, 2011
No connectivity for any application other than Internet Explorer.Can not update any applications. Can not sign in to any apps, such as Paltalk, AIM, etc.Internet Explorer runs fine.
Computer Specs:
-Compaq Evo N800c
-Windows XP SP3
-Pentium 4 - M 2.0ghz 1.99ghz
-512MB RAM
Computer was bought refurbished and I believe XP had been re-installed and I am not sure if all the factory divers were properly re-installed...
View 1 Replies
View Related
Jun 23, 2012
windows wont let me on the net as i need 2 purchase windows antivirus software but i want a free trial antivirus
View 2 Replies
View Related
Jun 1, 2011
In my office , we use 2003 server , In one of the client OS Crashed So , i fornatted the disk and installed new os in that , Then i installed LAN Drivers , and all other essential drivers , i restarted ..then also it said limited Connectivity, And my server is DHCP Configured , Some People told me to restart the SERVER , then only server will release a new Leased IP From DHCP and i have done it ...But no response ..Still the niggga computer, did not connct to the network...i never used 2003 server , and this problem i faced in the first day..sO Do i have to make any changes in the Configurations of ACTIVE DIRECTORY USERS AND COMPUTERS ...am the only one admin in my office i need t fix the issue ASAP..
View 2 Replies
View Related
Mar 11, 2011
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAlex>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alex-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 8 Replies
View Related
Jul 4, 2012
My internet connection goes up and down. After further investigation, I've noticed that as soon as i receive a certain # of packets, the internet connection goes down. It may be a process or application that is taking away these packets.
View 7 Replies
View Related
Dec 11, 2011
I got this message on my laptop, complete with the little yellow triangle hovering over my little internet icon at the bottom of my screen. The weird part is that my desktop computer and my mom's laptop (both of which are using wireless from the same router) can both successfully connect.I'm using my mom's laptop to type this. I tried unplugging the router and plugging it back in and it didn't work my laptop still won't connect.Here's a few of the facts:
- coincides with a recent installation of Windows XP Service Pack 2, which I have not done.
- I'm using Windows 7, just FYI
- My big desktop computer already has an Ethernet cable connecting its built-in modem directly to the router. Someone on another site suggested using an Ethernet cable to connect my laptop directly to the router, but my laptop is a little bit of a junkpile and doesn't have anywhere to plug one in.
- When running Windows Network Diagnostic it tells me that there's a "problem with the wireless adapter or access point" which would be the router. I've tried resetting the router, but it didn't work.
when I was running a virus scan on my laptop. About halfway through the scan it had picked up 3 infected objects. I was using a different computer while I waited for the scan to finish and when I came back in my laptop had mysteriously shut itself down. I rebooted it and got the whole "Windows was not properly shut down" thing with the options to restart in Safe Mode and such. I just restarted it regularly and when I got back on that's when I noticed that I had no internet. I re-ran the virus scan and got rid of all of them. I'm not sure if it has anything to do with my lack of internet, but I figured it was worth mentioning.
View 11 Replies
View Related
Oct 19, 2011
I've got a problem with my phone line which is preventing me from connecting to the internet.In my house we have a phone line (Provided by Telstra) and Internet (provided by TPG)Recently at 7 at night all of a sudden our internet dropped out. I did some checking around and look at my modem and the DSL light refuses to light up.I disconnect the phone and modem separator and plug the modem in directly to the phone line. Still no DSL connection.When i connect the phone directly to the phone line (and when it goes through the seperator) it still works, but i hear strong grainy static through the phone.
View 1 Replies
View Related
Dec 9, 2011
Had a virus that I cleaned on my laptop. After virus removal I can connect to my FIOS router both wired and wireless but cant get to the internet. Can ping laptop and laptop can ping desktop. I have no issue on my desktop machine getting to the internet only issue is with laptop. I have disabled/removed all apparent firewalls/antivirus. Using Windows XP SP3 and both Firefox and IE. Proxy is off in Firefox and IE. . Have reset network adapters. Network adapters are set to get DNS and IP automatically. IP Config shows IP address and the DHCP and DNS Server addresses are correct (FIOS Router). Windows Firewall is disabled. Something is stopping me from going outside the local network.
View 3 Replies
View Related
Jan 23, 2011
I've been happily using my DIR-655 for over 6 months now without any problems. Last night, wireless internet was working great but today it has stopped working. I plugged my modem directly into my computer and the internet worked fine, so it does not appear to be the modem. I also tried hard connecting my computer to the router (modem connected to router) but that didn't work. One sign of trouble is that the "globe" LED on the front of the router is slowly blinking orange (it had been blinking blue since I got it). I CAN access my WAN and I CAN access the router wireless but I CANNOT access the internet wireless.Here is what I tried, all without any success:
-Rebooting the router
-Turned off wireless encryption
-Checked firmware (current)
-Ensured my PPPoE IP address was correct
-Reset router to factory settings and recreated my WAN
View 4 Replies
View Related
Feb 3, 2011
I am currently configuring an ISR 892 without wifi. I got the start-up config working and am now stuck with zone-based firewalling. I configured four zones: private, dmz and internet-static and internet-dial. The private zone is configured for Vlan1 witch covers one ethernet switch port connected to the LAN. The dmz zone is currently not configured. The internet-static zone is configured for GigabitEthernet0 which connects us to our ISP providing a static IP. Internet-dial is configured for FastEthernet8 and connects to another ISP using a dial-up ADSL line, which is currently not connected. So, in short: I try to connect the private zone to internet-static and get traffic flowing, but can't get this working. The private zone can talk to the router and the router can talk to the internet. I suppose I forgot some basic configuration for the router itself because the zone configuration was done with this config guide: [URL]
This is my current running config:
Current configuration : 6076 bytes
!! Last configuration change at 08:26:03 UTC Thu Feb 3 2011 by admin!version 15.1service timestamps debug datetime msecservice timestamps log datetime
[Code].....
View 5 Replies
View Related
Jan 1, 2012
Physical devices are a Cisco 2901 (CISCO2901/K9) with GE0/0 configured as 192.168.1.1
Connected through a D-Link DGS-1210-24 configured as 192.168.1.202
Running on a domain with an HP domain server as 192.168.1.2
The 2901 was an EHWIC (VA-DSL-A oPoTS) on EHWIC 0/0/0
GE 0/0 on the 2901 is physically connected to the DGS-1210 which is physically connected to the server.
VDSL 0/0/0 is physically connected to the DSL jack.
So far the configuration reports all is connected, and I can ping the gateway of our ISP (using CLI or Cisco CP); however the server reports no internet connection and no workstations can access the 'net.
Once connected; I'd also like to allow ports through for use on the network (25, 80, 110, 443, 987, 1723) - but not sure on how to do that just yet!
Our IP is 202.27.19x.19x
Our Gateway is 202.27.217.5
[Code] ......
View 11 Replies
View Related
Apr 21, 2013
I can not connect to the internet either by WiFi or ethernet connection on my XPS L501X 64bit running Windows 7. This problem suddenly occurred after a failed microsoft update. The Action Centre lists a number of problems including;
Host Process for Windows Services........................................Windows Update installation problem
Microsoft Malware Protection Command Line Utility (3).......Mp Telemetry
Microsoft Management Console...............................................Stopped working
Network Diagnostics Framework (4).......................................Unable to diagnose/repair problems
Windows Wireless Lan 802.11 Extensibility Framework....Stopped working
I can copy the technical details to Notepad and send them if this would be useful in determining the problem and finding a solution.
Of course, with no internet connection, I have been unable to report the problems, check for solutions or run any online diagnostics and am using another laptop to communicate.
I have downloaded and installed the latest WiFi adaptor (Intel Centrino Wireless-N 1000) and driver to no avail. I used the Intel updater wizard thingy which uninstalled the old adaptor and installed the new one. I have not updated the Realtec PCIe GBE Family Controller driver, but when I click on update driver, it indicates the the latest driver is installed. All devices are listed as working properly.
View 22 Replies
View Related
Oct 12, 2011
Reformatted My HDD now I have no LAN internet on MS XP.
View 2 Replies
View Related
Dec 19, 2011
Laptop says connected, but not able to browse.
View 1 Replies
View Related
Sep 3, 2012
We have BSNL Broad Band. We have distributed connection between us. So, We want to know, that How many uses of Internet are Every Member using Such as DownloadingUploading, Etc.
View 1 Replies
View Related
Feb 1, 2013
For the past couple of weeks my internet has suddenly disconnecting on almost a daily basis.Windows troubleshooting the problem always fixes it in seconds and I usually have no further problems during the day but it's getting annoying and I'd really like to know what the issue is and how to fix it.It happened again just now and Windows Diagnostics found the following problem: "Local Area Connection" doesn't have a valid IP configuration.I'm running Windows 7 and using an ethernet cable, no wireless connection.
View 4 Replies
View Related
Jun 4, 2011
-Taking all of the bandwidth.
-My computer is causing it.
-Our Internet providers are Comcast(cable) for default and Frontier(DSL) for backup; business class.
-Normal: 6Mbps down, 4Mbps up; Abnormal: 0.4Mbps down, 0.2 up; around those numbers.
-Possibly a virus.
-Task-manager shows as much internet use as usual, even if it is apparent that my computer is using allot during that time.
-Random times.
-Might have settings allowing it to take however much broadband it wants, I do not know if there is such a setting or not.I only have a day or so before my dad cuts me from the internet.
View 9 Replies
View Related
