Belkin Routers :: F5D7050(B) Drivers For WinXP Pro 64 Bit?
Dec 19, 2012Where can I get the correct drivers for an F5D7050B on a Windows XP Professional 64-bit machine?
View 1 RepliesWhere can I get the correct drivers for an F5D7050B on a Windows XP Professional 64-bit machine?
View 1 RepliesI have a Belkin F5D7050 USB Wireless G network card and it won't connect to windows xp. It tried using on Linux (ubuntu 10.04 live cd) and it works perfectly. But when I boot into windows, it doesn't. I have installed all the drivers and software I could find for it. But the programs for it don't open at all and for some reason i cant even configure it using windows "Connect to". (You know how usually you get the little wireless icon at the bottom of the screen and stuff)
View 7 Replies View Related[URL]
I have the version 3xxx adapter yet I can't get it to work at all.
I've tried letting windows see it, manually pick drivers from the file I download, that doesn't work. I've tried using the installer and that only makes things worse. IT SAYS IT SUPPORTS 64bit 7!
I have a WUSB11 v2.8 laying around but that is even worse looking 64bit driver wise.
I cannot install the printer drivers manually (HP Deskjet 970 CSE) onto my Belkin N750 DB router. The USB Print and Storage Manager does not appear on my computer
View 1 Replies View RelatedMy computer crashed the other day and HDD failed. i finally got it back up and running but ive been using a usb wireless adapter. i do not have the disk anymore to install the drivers, nor will my computer install them from the internet because i dont have an internet connection on my desktop. what are my options to have them installed?
View 3 Replies View RelatedI am trying to use this belkin surf n150 in a Netbook thats is running Windows CE embedded 6drivers for windows ce6 and can not find any drivers
View 1 Replies View RelatedI recently updated to Windows 8, and before updating, Windows 8 setup recognized the drivers for my Belkin G Desktop wireless card. After installation, my system was able to connect to my wi-fi network without any problem. However, due to the power going off at my home, an automatic update on Windows 8 got interrupted.
Since then, it has caused a ton of problems, which caused me to finally re-install Windows 8. Now, however, it does not recognize the wireless card and its drivers, and does not let me install from the CD, or through any alternate sources ?
I have an older PC using cable internet to connect. It works fine. There is no router, no other PCs, no network.I built a new PC. I installed WinXP Pro SP2 from a USB drive. I also installed the latest version of the mobo drivers including those for the Realtek NIC. When I swap the cat5 cable from that goes between the cable modem and my old PC to the new PC, the new PC does not connect to the internet. After a reboot the IP address is a 169.254.x.y address. Here's what I have tried so far to fix the problem.
View 2 Replies View RelatedI removed my computer from a domain to a workgroup,I then rebooted the pc and now it si asking me for a username and password.I can not access important information on the local drive.
View 1 Replies View Relatedfind suitable WinXP wireless driver for dell vostro 1015.
I downloaded a WinXP driver for Dell Vostro 1015 from dell web site but it is not working.
When I try to install this driver, an error message apears. The message tells that ""QMI device is missing"".
(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies View RelatedI have an HP-MINI with an atom processor 1.6ghz and dual core according to device manager. It has 1 gb ram and no other issues. I can boot into Ubuntu and have everything work fine. It goes on line with no prodding on WAP after I enter the password as usual.
When I attempt to do this in winXP on the same exact computer, it comes up with the no connectivity issue. I have run ipconfig and here is the result: (btw I am sending this info from another computer)
Windows IP Configuration
Host Name . . . . . . . . . . . . : KEN_HP_MINI
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
[code]...
After I ran this see that Netbios over TcpIp was disabled. I am sure it is supposed to run in some kind of automatic mode or something as I recall.
How do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies View Relatedhow to download software and drivers to a belkin usb wireless adapter with no internet on that system and i need that system really bad.and i dont have the cd my friend gave this to me?
View 1 Replies View RelatedHow do I add network drivers to a wds boot image on 2003R2. I see that 2008 has the add driver option but that doesn't exist in 2003r2.
View 1 Replies View RelatedIf your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
View 6 Replies View RelatedI have the N600DB Wireless Router I am connected to the internet, but cannot open My Routers Homepage with http://router or http://192.168.2.1. How can I get to this page to reset the router settings? I also cannot connect any of my wireless devices to the network..
View 1 Replies View RelatedI have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies View RelatedIn my house...I have one router upstairs (Belkin F5D8236-4) and great signal upstairs...downstairs signal is not so swift and sometimes, I can't even get a signal. So I thought let me go purchase a router (router # 2) and set it up downstairs and see if that will improve the signal of my Belkin. The 2nd router I purchased is a Belkin N150 (I thought buy 2 Belkins...maybe they can communicate better?). What I need to know is how do I connect the Belkin N150, to my Belkin F5.. and just use it to strengthen my signal to my downstairs part of the house?
View 14 Replies View RelatedI see the switch to toggle the QOS on and off, but it is greyed out in on and will not allow me to switch. I would like to see if it solves the speed problem with my iPad. The newest firmware is installed in the router. I also tried changing other fields to see if it would unlock the quality of service field with no luck.
View 13 Replies View RelatedLately I notice my router is very very slow. most of the time I cannot use my ipad or it takes too long and sometimes never finishes downloading a web site. I called Belkin support, and I was told that I need to update and configure, and to do that I have to pay more than what my router cost.
View 3 Replies View Relatedunder support I cannot access any info for a f80 router. Nothing allows me to enter that model #.
View 1 Replies View RelatedI was trying for hours to connect the USB Hard Drive of 3TB (My Book WD 3TB) in the USB port A and B of the router then the router won't reconize. I Have another the same model but different capacity and work excellent (My Book WD 2TB). What I can I do in order to use my hard drive in my network?
View 2 Replies View RelatedN600 router will not comunicate with my desktop computer through a cisco switch. The LAN was working fine when I was using a Linksys router. Is this a compatability problem between Belkin and Linksys products?
View 1 Replies View RelatedDoes the Blekin N1 Vision have a WPS button? I'm trying to add an extender.
View 1 Replies View RelatedWhere can I get the setup software for my N600DB USB adapter, I cannot find the CD I got with my wireless adapter.
View 1 Replies View RelatedI have added a list of Mac numbers for allowed devices & checked the enable mac filtering box,but did not check the block box.All the Mac number devices, cannot access the wifi.But if I uncheck the "enable mac filtering box"all the Mac number devices can access the wifi.This also include other devices not in the list can also access to the wifi.It seem that the router can only block mac number BUT cannot have "allow list"I checked my firmware = 1.00.22 (Aug31 2000 14.36.01)Is this the latest firmware??
View 6 Replies View RelatedBelkin Router N300 Model:F9K1002V2 apparently forces me to have specific LAN and WAN IPs that I have been unable to change.My ISP has been changing my IP and advising me that everything works without issue. It's true that my IP does change, but only if I am directly connected to my modem - I have a completely different IP. If my router is connected to the modem and I am connected either by Ethernet/wifi from the router, my WAN IP is displayed as my IP & the completely different IP is nowhere to be found.
The issue is that this WAN IP seems to have been banned on a game that I played on a daily basis. Game support has not been responding to my requests & I know my account on that game still exists because I am able to play it when I'm directly connected to my modem. Connecting with my modem is not an option, as there are others in my home that also need to use wifi.So, if it's not already obvious, I'm looking for a way to change my WAN IP ... without having to toss out the product and buy a new router - which I am seriously beginning to consider it.
How do I configure my router to work with a dsl modem router model number is f7d7302
View 2 Replies View RelatedCan't get internet.I can plug laptop directly into modem and works fine. When I plug modem into brand new wireless router (N300) the light glows amber. I've been through the set-up 10 times. Actually the same reason I replaced old router with this one.
View 2 Replies View RelatedI recently replaced my old Belkin Pre-N router with a newer N router. Still, the newer one is only less older than my Pre-N Belkin router that I had sitting around but never opened and installed (F5D8231-4). Anyway, I finally decided to set it up. I was trying to log into the router to set security settings and to update the firmware but when I type the IP address into the address bar in IE or Firefox, it is partially blank. There are no functional buttons. Only the Belkin logo on a gray background with a couple of emtpy boxes where it looks like functional buttons or tabs should be. how to get to a working screen with functional buttons?
View 1 Replies View RelatedI know my Modem/router is old but I am connecting okay to the internet with my laptop, the thing is my husband has just bought a Google Nexus Tablet and although it finds my Belkin Modem (model F5D7632-4) it says it's finding IP address, then says its saved and then connecting, but it dont connect. Also there is no security on it and it wont find my model number to add the security, is it me or what?
View 1 Replies View RelatedIs the F7D8302 v1 compatible with WDS? I want to add a 2nd unit to act as a range extender and give me some ethernet ports to plug a Tivo into.
View 1 Replies View Related