Error Message - Network Password Needs To Be 40 / 104 Bits Depending?
Apr 24, 2012
So I have an issue with getting a laptop hooked onto the router signal. The router is a brand spankin new Linksys EA4500 and the laptop is an IBM which is running Win XP (not sure of SP version as it is a customer's comp. at a hotel I run). Anyway, the error message I am encountering is:The network password needs to be 40 bits r 104 bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal charactersAt first I thought is was my router password since it contained a $ symbol so I changed it to only letters and numbers but still didn't work. I have never encountered this error message on any laptops and no other rooms have been affected.
View 2 Replies
ADVERTISEMENT
Feb 4, 2011
I'm at my brother's house and I'm trying to connect to hs wireless network. I know the password but whenever I try to enter it it gives me a message that says, "The network password needs to be 128bits or 256 bits depending on your network configuration. This can be entered as 8 to 63 characters or 64 hexadecimal characters." From other forums I've looked at it says that I need to get to the router settings page. It gives me an IP adress to paste into the web browser but it doesn't come up as anything. What the heck?
View 4 Replies
View Related
Dec 8, 2012
I have a wireless setup with a linksys router hooked up. I mainly connect with my laptop but now I'm trying to test out a Dell Inspirion 3000 Windows XP. The Dell picks up the signal of my connection that is secure when I have the proxim router connected. When I go to put in my password I get this message : "The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters." Otherwise if I direction plug in the Ethernet cord it 'connects' but I can't do anything. I'm set up as a WPA Personal in security mode when I got into my linksys account.
View 2 Replies
View Related
Mar 15, 2011
DIR-655 RevA4 - upgraded to 1.35NA, which is shown on http://192.168.0.1/
When I try to re-log in as Admin, I get a message of invalid password. I have unplugged to reset, but still cannot get back in.
View 3 Replies
View Related
Oct 28, 2012
When i try to connect kf to wifi router, I keep getting password error message when I type my network pw. I have no problem connecting to other wifi connections
View 6 Replies
View Related
Feb 20, 2011
i am attaching the image which i recieved last night when i was assigning the IP but i got the error message which does not resembel to IP conflict error messsage
View 1 Replies
View Related
May 22, 2011
running cisco VPN client over Windows XP SP 2 64 bits.
I get the error 442 Failed to enable the virtual adapter. I have seen a number of solutions, but can not find solutions or workarounds for Windows XP 64 bits.
View 2 Replies
View Related
May 7, 2011
My roommate has just gotten a second hand laptop and he's trying to connect it to the Wireless network so that he can browse the internet from his room.However, although all the settings are correct, attempting to connect to the network loops.It comes up showing the Wireless Networks available, I select the network and click connect, it then asks for the encryption key. I enter the key and hit connect again, it comes up with the 'Connecting' pop-up and then loops back to the Available Networks screen again.There are no error messages, it just goes back to the starting screen and it hasnt connected.The Laptop in question is a Lenovo T60 with a Intel PRO/Wireless 3945ABG card.The router is a TP-Link TD-W8960N.
View 5 Replies
View Related
Jan 5, 2013
I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies
View Related
Oct 20, 2012
I am trying to access a government jobs page to apply for an internship. When I access the page from my home network (using multiple browsers and multiple computers) I get a result that references the job opening from last year, and doesn't have an application button. When I access the site using my 3G connection on my phone, or when accessed from any other internet connection, I get the new page which includes information about the 2013 job opening, and has an application button. When I try to enter the URL for the application page on my home network, I get a 404 error. If I turn my wifi off on my phone and reload the same page, it resolves to the correct page.
View 17 Replies
View Related
Jun 30, 2012
How many bits must be reallocated from host ID to network ID to create 16 subnets?( i did read the discussion on another page and still no clue). For the Class C network address 192.168.10.0 , which of the following subnet masks provides 32 subnets? How many host bits are necessary to assign addresses to 62 hosts ??
View 4 Replies
View Related
Aug 6, 2012
Sometimes, either browsing from my computer, iPad or iPhone, I sometimes get a "can't connect to server" error, and it's not just a few forums here and there, it is a lot of them. But if I give them 5 or 10 minutes they will come. Imkmow that this isn't a normal up issue with sites servers actually being down. I thought it was a Google chrome issue, but it's been happening on safari. It hasn't started till we switched our Internet plan to 3mbps and a new router.
View 19 Replies
View Related
May 12, 2012
I keep dropping off my internet connection and getting this error.
View 11 Replies
View Related
Sep 30, 2012
After making some physical changes to my home network (which had been running for sometime without incident) my desktop machine stopped (home built MSI X58 Platinum MB) talking to the network. I get "media not connected" even though I am connected, and the connection works for any other computer I attach. I get indication of proper physical connection at both ends (router and computer ethernet port), however I get no connection and the default 169 .... IP address. It does not matter if I create a fixed IP address in the router and set the ip address of the port to correspond. I have tried all the ip resets, stack resets, remove and reinstall the network ports, etc., to no avail. Connecting directly to the cable modem did not work. I even installed a new buss ethernet card with its own drivers and I get the same 'media not connected'.
View 3 Replies
View Related
Jan 2, 2012
OS: Windows 7 Home Premium -- Service Pack 1, 64-bit
Browser: IE 9
Computer: Dell Studio 1745
I am receiving an error message window titled "Wireless Configuration" with the following message:
"OLE initialization failed. Make sure that the OLE libraries are the correct version."
I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.
View 6 Replies
View Related
Jan 30, 2012
My laptop will not connect through my router anymore. I'm getting the message ( Cannot communicate with Primary DNS server (192.168.1.254). It works fine with an ethernet cable. I have a WII that uses the router also and I can watch a Netflix movie on it so the router seems to be working. My desktop computer is working fine through a DSL connection. The laptop is a Gateway and is running Vista.
View 14 Replies
View Related
Aug 2, 2011
I’m deploying new images on my switch 2960 24TT L. After installing the new image (c2960-lanbasek9-mz.122-58.SE1.bin) and reboot the switch I have always this error message : “Error loading "c2960-lanbasek9-mz.122-58.SE1.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c2960-lanbasek9-mz.122-58.SE1.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ”
But the switch still boot well. Why do I have this error message?
View 6 Replies
View Related
Jun 24, 2012
LMS installed on Windows 2003. Backup fais with message "Backup failed.ERROR(1297): Fatal error: Database engine 'UPMDbEngine' could not be started on database 'upm' in Bulk mode.."
dbbackup.log attached.
View 9 Replies
View Related
May 22, 2011
After setting thru set time command, error message is display on server 'synthetic time issued'.
View 2 Replies
View Related
Nov 19, 2012
Server Error: 550 emails blocked from send.
View 1 Replies
View Related
Sep 25, 2011
i keep getting an error message when i scan. error message: cannot communicate with scanner for these reasons
-scanner is turned off
-scanner is disconnected (it is disconnected from LAN, if using on LAN)BUT MY MACHINE IS ON
View 3 Replies
View Related
Feb 25, 2013
Sylvania Smartbook synet7wic-bk cannot get online. It shows my wifi is on, but I do not have a tab for wifi information, to put my info in it.
View 2 Replies
View Related
Jan 22, 2013
I have three PCs in my lan. (A, B & C).I can access shared drives of B & C from A
I can access shared drive of A from C but cannot access B from C
I can access shared drive of C from A & B.
I get error message "Logon failure: the user has not been granted the requested logon type at this computer".
All the systems are Win 7, A & B are desktop and C is a laptop.I added the C's name in A's "Security Settings -> Local Policies -> User Rights Assignment -> Access this Computer from the Network" too. Still can't access.
View 1 Replies
View Related
Sep 10, 2012
even after installing t driver,i'm getting t same error message.Wifi adapter cannot be found
View 1 Replies
View Related
Dec 31, 2012
Whenever I try to goto a webpage within any browser,despite me being connected to my network(though 1 received packet to every 20 or so sent packet ratio) it tells me that DNS lookup failed. I had a similar issue on my other pc that I use more often,though connecting through WIFI momentarily resolved the issue,before I returning to wired,where everything has been fine. My other pc however has no wifi adapter. So ive been stuck.
View 12 Replies
View Related
Jul 12, 2011
Does 6rd working on the DIR-601?
For example if I enter the Comcast 6rd parameters:
6rd IPv6 prefix 2001:55c:: /32 6rd border relay IP address 69.252.80.66
I then click on "Save Settings". Now I get a pop up message that says "Invalid IP address" I'm running firmware 1.02NA
View 7 Replies
View Related
Sep 5, 2012
tying to connect CSM client to CSM server (ver 4.0) and getting attached error message. The server is running, no errors reported while installation, all services are up and fine. I tried to install client locally on the server and connect it that way with no luck. CSM server runs on Win 2008, firewall disabled.
View 0 Replies
View Related
Dec 21, 2010
As soon as I connected my ASR 1002s to the Internet and digested the Internet BGP table, I began receiving this message. I’ve google’d and turned up nothing so far. I assume I need to allocate more memory to this process.
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 312% exceeds warning level 310%
Here's a sh mem:
#sh mem Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)Processor 3008A008 1758530508 647878488 1110652020 1110104020 1109994164lsmpi_io 98FEB1D0 6295088 6294120 968 968 968
View 1 Replies
View Related
Jun 6, 2012
We recently upgraded our any connect client from -2.5.3055 to -3.0.07059. This is running on a ASA HA pair running 8.4(2)8. Since the upgrade our users are seeing continual disconnects.
View 2 Replies
View Related
Sep 15, 2009
We have 2 Cat 6509 connected to 1 Gbps Ethernet WAN Link. On each 6509 we use 2 Gbps IPSec SPA Encryption cards for Encryption. The encrypted traffic goes to a GRE Tunnel. This morning I found some error messages in syslog.
%CONST_DIAG-SP-3-HM_TEST_FAIL: Module 1 TestIPSecEncrypDecrypPkt consecutive failure count:2
There were also several short tunnel downs/ups. I wonder if there is a bug in the new IOS image 12.2(33)SXI2a. We upgraded to this image last weekend.
View 2 Replies
View Related
May 14, 2012
net send command not working. Even after starting messenger. Error : The Message Alias could not be found on the network
View 3 Replies
View Related
May 26, 2011
I am unable to connect to the internet on my desktop computer. The error message I receive is" Download failed(12007) The sever name or address could not be resolved" I am running windows 7. Hooked up to att uverse. My laptop is working as you can see by sending this message. I have been trying to fix this problem for the last 2 days to no avail. I uninstalled norton hoping it was a firewall problem. On the local area connection it shows IPV4 connedtivety: No Network access.
View 2 Replies
View Related
Jun 20, 2011
I have just gone through hours of tech support with my ISP and still cannot seem to get online. Problem is the same as recent posts by jerguy1928, with message "DNS lookup failed...." coming up in Google Chrome. Both IE and FF just say cannot connect.Running Windows 7 on laptop. I have tried alt DNS settings (Google and others), all the CMD suggestions, disabling firewalls etc, etc! Other computer in house connects just fine.Ping works fine. Really, there appears to be no reason to not be able to connect - since I am actually connected!
View 13 Replies
View Related
