Linksys Wireless Adapters :: Error 211 On A WUSB100v2 (Win7 X64)
Aug 7, 2011
I have during the day attemped to install the card on my machine.
At first attempt, I followed the instruction on the CD. It took forever, and ended up giving me the notorious "Error 211".
I then tried the different solutions. First this one: [URL] The difference however being that the card indeed was found and identified properly by the device manager. Installed the downloaded drivers manually, but if I remember correctly (this was a few hours ago) it timed out and I got a message the device wasn't properly installed.
[URL] Here I couldn't even perform the first step, since I couldn't even remove the drivers! The process of uninstalling drivers gets stuck, and I waited for over an hour, and eventually decided to just rip the USB dongle out. That stopped the uninstalling process. Refitted the USB dongle in the computer, and the network device showed up the same way as it did before.
So, what apperas to be the case is that the device seems to have the proper drivers installed, but for some reason it cannot communicate properly with the computer. I can see it in the device manager; I can see the properties and even change the settings. However, I cannot uninstall it, remove it (with the Remove USB Device dialogue) or access it in any other way - it becomes completely unresponsive and if anything happens, it times out. The card does not show up in the list of avaliable network devices. The blue diode on the dongle lights, and sometimes flashes as if it was working.
System spec:
Case: ANTEC HTPC FUSION M-ATX
Mobo: ASUS MAXIMUS III GENE P55 S-1156 M-ATXRAM: CORSAIR 8GB DDR3 XMS3 INTEL I5/I7 PC10666 1333MHZProcessor: INTEL CORE I5 750 2.66GHZ 8MB S-1156OS: MICROSOFT WINDOWS 7 HOME PREM 64-BIT ENG
HDD: 2x WESTERN DIGITAL CAVIAR BLACK 500GB 7200RPM SATA/300
Graphics: XFX GEFORCE GTX 275 LITE 896MB GDDR3 PCI-E
View 1 Replies
ADVERTISEMENT
Sep 30, 2011
I have spent over 6 hours trying to download the driver for the wusb54gsc ver. 2 software for win7 x64. Your us site is taking over 20 minutes to show it's pages (Sometimes over 40 mins, get more servers!) but the uk site is quick. I search for "wusb54gsc" on Bing and all the sites give me drivers for everything but the 54gsc. Your site (uk) only gave me the user guides! The last time your software decided to just disappear I found it in less than a half hour! I'm very upset link or URL to download the driver from or are you restricting access to it.
View 1 Replies
View Related
Mar 26, 2010
I have installed manually drivers for wusb54gc v3, but the wireless manager still write error 211. I do see the adapter in device manager and it's writen than it's working, bat still the manager doesn't work and ican't see any net. OS Win7 32bit.
View 9 Replies
View Related
Mar 12, 2011
Recently purchased refurb AE1000, it failed to work in Win7(AsusSabertooth I7 system) showing up but never enabling regardless of what I tried. I tested it in an old notebook I have under XP and worked flawlessly. So, I then tested it in XP mode on the I7 and it worked as well. I've used the latest Cisco drivers but no luck under Windows 7. It obviously isn't the hardware?
View 2 Replies
View Related
Aug 23, 2012
my Linksys Ethernet bridge WET11 V1.0, where working perfect, but when i reset the device, and try lo login whit user admin and password admin, my browser show error 404, this happ whit crome, mozilla, an I Explorer, i download the Setup wizard, and the error message is "the setup wizard was unable to locate a wirless ethernet bridge on the network......"
when i connect the cable to de device, the lan led is on, and the ping command give me reply.
another port to configure, such as telnet?
View 1 Replies
View Related
Dec 31, 2008
I purchased a WRT110 wireless router several weeks ago. Used it with my WPC55AG with no problems at all. I liked the wireless-N, so I decided to upgrade to a wireless-N notebook card and purchased a WPC100. I can always connect to the router with 100% signal strength. However, when trying to access the Internet, sometimes I can connect to websites, but I regularly get an error message that Internet Explorer cannot connect to the internet, even though the signal strength is still 100%.
Tried going back to my WPC55AG and do not get any connection error messages. Tried connecting to my router with my PSP and do not get any connection error messages. Connected to another wireless router that didn't have WPA or WEP using my WPC100 and didn't get any connection error messages..
View 5 Replies
View Related
Mar 17, 2011
I am using the USB network adaptor, Model : WUSB600N version 2. It has worked fine whenever I have needed it. Except now. I received “Your adapter may not be installed properly”” ERROR 211: The network adapter is not installed properly” message last night. Also the Windows pop-up message: “USB device not recognized” message. I removed the adaptor and reinstalled it into another USB port. The same thing happened. I moved it again to a third USB port, I received the same error on all five of my PC’s USB ports. I was not able to access the network at all last night.
I brought in laptop into work today , because the antenna/extension is kept there. I inserted the adaptor and it started right up. After an hour of usage, I disconnected the antenna and the adaptor and reinserting the adaptor without the antenna directly into the USB port. And it still worked fine.I turned the PC off, disconnected everything and went to lunch. When I returned, booted up the PC, and inserted the adaptor and, once again got the error message: “ERROR 211 – The network adapter is not installed properly…. I tried again, this time using the antenna, and it is up and working for now.
View 1 Replies
View Related
Dec 28, 2007
Ive tried to reinstall XP, to redownload driver, to reinstall driver etc...
View 9 Replies
View Related
Jan 9, 2012
I am having trouble installing the wusb100 adapter on a Windows 7 Pro 64 bit machine. I have downloaded the updated files and when I go to install the software, I get to the section that says, "plug in the adapter." At that point, it says it can see the adapter and it sits for 3 minutes trying to complete the install. The I get error 211 which says the adapter is plugged in wrong and to try again. I notice that the adapter is set up with drivers in the Hardward Management area of Windows, however, I cannot access the adapter to set it up. Thoughts? I have also tried to manually install the drivers but they are installed. The trouble is I can't see the adapter.
View 2 Replies
View Related
Oct 27, 2008
Trying to install WMP54G v4.0 on XP SP3. I have tried all three PCI slots. Removing driver RT2500.SYS system will boot. Put it back and BSOD Error:driver_irql_not_less_or_equal
View 8 Replies
View Related
Jun 9, 2012
When I enable IPv6 on my E4200, the Windows 7 DHCP client crashes. It also seems to crash the audio service, the event logger and a few other windows services.
View 9 Replies
View Related
Jun 25, 2012
Bought GoFlex Home 3TB, plugged into Cisco WRT310N V2, w/ Desktop PC (Win 7 64bit) does not recognize the drive. Get NETWORK ERROR "Windows cannot access \goflex_home" Error Code: 0x80070035. Can not map netork drive. Under Win Explorer the drive DOES appear as "GoFlex Home:UPNP-AV" in TWO places, 1) under Media Devices & 2) Under Storage. Bother places are treated as MEDIA because, when I click on either of them it opens Windows Media Player! I can type in the IP address in BOTH IE & WIn Explorer and it will take me to the web page for the drive, where i can log in and create users, add folderes, etc. I WANT TO USE THIS AS A BACK-UP DRIVE, but can't get WINDOWS TO RECOGNIZE IT. I have turned off McAfee
View 3 Replies
View Related
Dec 21, 2012
I have an Inspiron One 2305. Upgraded from Win7 to Win8x64 now wireless doesn't work. Hardwire works fine. Ran wireless for a day, while hooking up as a Homegroup. Now it sees the router but won't connect.
View 2 Replies
View Related
Oct 9, 2011
I have installed an RV120W router specifically for the VPN capability. I have a small home office with 3 Win7 computers and a SeaGate GoFlex Home NAS drive opperating on the RV120W LAN. I need to allow users to access these networked computers and NAS device over the VPN by mapping their IP locations, such as 192.168.100.155, which is the local IP assigned by the router.
I am able to establish a QuickVPN connection without trouble. I had to set the port to 60443 as it was conflicting with the NAS drive, but this resolved that problem.
I am able to ping the router without any problem over the VPN using the local IP address. I am able to pull up the NAS web portal off the drive via the local IP address using a broswer. Therefore, I know I am talking to the drive via port 443 (I think that is the right port for http). I CANNOT ping the NAS drive over the VPN. I CANNOT ping ANY of the computers or the NAS over the VPN.
Through my reading it appears that a port is being blocked that might need to be opened. But, in the same readings, they say you should use a VPN so that you don't have any issues with blocked ports. I thought I was using a VPN!
I am testing the VPN on a WIN7 Pro laptop with the most current QuickVPN installed. I have also update the firmware on the router to the most current as well.
When I do an ipconfig /all command and look at what I think is the VPN information, there does not appear to be any tunnels established. I don't know if this matters, but thought it odd since I do have a VPN established.
I have enabled PING in the firewall and unchecked the Block Fragment Packets.
I should also note that I can remote manage the router using the 60443 port and an https connection to the local ip address, so clearing there is a connection. SO WHY CAN"T I SEE ANY OF MY WIN 7 COMPUTERS OR MY NAS DRIVE?
I have burned a lot of time on this and without the VPN capabilities, this router does me not good.
View 8 Replies
View Related
Feb 5, 2011
I have recently installed a Cisco 2106 with a single 1131 AP at home! I know, lucky eh, it was used in our office but I now have it only on a temporary basis and have it set up as a home lab. I am using a single SSID with WPA2 AES encryption with PSK using default values and no P2P blocking enabled.Initially the controller was running ver 5.2.78, the connection was very slow compared to the wired connection and I couldn't VPN over this link although I could over the wire?I thought I would upgrade to ver 7.0.98, which resulted in the VPN now working but still slow speeds.I tested all cables and connections and swapped out the cables with no difference along with checking the interfaces on both sides with no errors reported. I was also testing on both A & G radios with again no difference and erratic ping response times. I also noticed that Windows homegroup was now not working along with RDP using the netbios name (using the IP worked ok) and strangely I cannot telnet to the controller although it is enabled and enabled for wireless management (it says telnet not allowed on this port when trying to ssh!! a telnet connection just times out); I can connect via https with no problems . All these features work flawlessly going through the router, just not over the Cisco WLAN?I then downgraded and upgraded along with rebuilding the controller thinking it may be an issue with my AP or controller. This resulted in the connection speed to return to normal but still none of the other features mentioned are working as they should. I also removed all firewalls and acls from the end devices and the router with no effect.
View 3 Replies
View Related
Dec 24, 2011
making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies
View Related
May 24, 2011
When I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies
View Related
May 26, 2011
How to install model WUSB54GSC.
View 5 Replies
View Related
Jan 17, 2012
I run the CD setup disk and the driver install correctly.In the "Connecting the Adapter" screen I click next before connecting the adapter,the setup screen just close with out any notification and no icons on the system tray.I shut down the machine, insert the adapter and power on the machine,now I have the monitor icon and a wireless connection icon in the system tray (the Power led is green and the Link led isblink),when I double click on the monitor icon I got the following screen: no available wireless and the refresh, connect and manual setup are disabled.when I click on the "open the monitor" form the right click menu I got the following screen: also nothing to do on this screen.so I think it's was because I don't have any wi-fi around me, I shutdown the computer raise my wi-fi andrestart the machine, now the led in the same status but the system tray icons didn't appears and when Itry to open it from the menu it's run for few seconds without any screen and disappear.
View 6 Replies
View Related
Jan 21, 2011
I'm running Windows 7-64 bit. The AE1000 works great so far, in the one day I've had it, and it appears to start itself and connect when turning the computer on (unlike other people on here that I've seen). BUT, it's all pointless if I can't put my computer into standby. The adapter kicks it right back out as soon as I try to sleep the computer.
I've checked the device settings and "allow the device to wake the computer" is unchecked (in fact, it's grayed out). I rarely turn off the computer; I much prefer to just put it in standby. I don't want to have to unplug the adapter every time I do that.
View 1 Replies
View Related
Jul 5, 2011
I recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies
View Related
Sep 25, 2011
I'm at a new apt and I can't get Online with vista to download the driver so I've been trying to download it on a droid or iPhone and transfer the file any know any way to do this besides finding a cd? Can I make a cd at a friends house by downloading the driver online? Where can I get the driver?
View 1 Replies
View Related
Sep 9, 2012
I picked up a AE3000 for an older laptop, but it will not connect to any network. It is on an older (01') dell laptop running XP SP3. I have tried using the disk and downloading the latest drivers on-line but no luck. It picks up all the networks around me and mine, but it says trying to connect and just can't. I tried it on another laptop and everything works fine. Is there an issue with this adapter and the original USB ports or XP in general? I have checked and rechecked the passcodes, I have deleted all of the profiles and started from the beginning again. I removed my anti-virus program as well as the last effort. Nothing I do seems to make a difference though.This is just used to access the internet on a laptop that is dedicated to a telescope.
View 4 Replies
View Related
Mar 8, 2011
i tried down loading drivers but computer still says needs cd.
View 4 Replies
View Related
Oct 9, 2011
Like I said my AE1200 adapter keeps disconnecting, it happens about twice a day, underload especially.I already tried to update drivers, reinstall drivers, tweak settings, nothing works, I even turned off power save mode.I'm running WIndows 7 64-bit
View 4 Replies
View Related
Jul 30, 2011
We're using our Sprint hot spot and want to make a wireless connection to the TV...can I use the AE1000 for this? If not, what do I need to use?
View 2 Replies
View Related
Jan 16, 2012
I'm having trouble trying to allow this device to wake the pc. Does WMP600N support this ? When i go into the power management section i have 'Allow the computer to turn off this device to save power' but the option for 'Allow this device to wake the computer' is greyed out ? I currently have driver version 3.0.2.0 installed.
View 5 Replies
View Related
Nov 2, 2012
I had a hard drive failure recently and replaced my HDD with an identical HDD (WD 500 AAKS) and did a restore from my WD Passport Essential. Everything works as before except I can't install my AE1000 wireless adapter. The OS recognizes the new hardware and I attempt instalation form the setup CD. Istallation goes until it gets to the "Installing" step and then it just stays there forever until it comes back with an error. I am accessing the internet now through a cat 5 ethernet hook-up.
View 2 Replies
View Related
Dec 2, 2008
I have a WET54GS5 that I can't setup:
I am running Vista and have the bridge connected to a WRTP54G wireless router...I have also turned with Windows firewall OFF. My network has been setup properly and all other components work fine.
I have tried the setup CD, but get the "The Setup Utility was unable to locate a Wireless G Ethernet bridge..." message.
I have also held the reset button for 30+ seconds and tried to log into the bridge directly using the IP addy (192.168.1.226)
View 5 Replies
View Related
Apr 23, 2008
I am having some trouble getting my computer with Windows XP to use the Linksys model WMP54G wireless - G PCI adapter to connect to the network in my house. I have installed the hardware and the drivers. When I open the view available wireless networks window my network shows up with two bars of strength. But when I select this network and click connect, I get an error message saying "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again." I have other computers connecting to this wireless network without any problem. The wireless router I am using is the model WRT150N wireless
View 6 Replies
View Related
May 29, 2012
I have a Linksys WPC54GS Wireless adapter with Speedbooster (hardware version 1.1) & I lost my installation CD. I just installed a fresh copy of Windows XP Home Service Pack 1 and I am using a Dell Latitude C810 laptop. The card is the PCMCIA model. I cant get any assistane from Linksys because my warranty expired and I dont have the funds to buy a new card right now, so how I could get this one working again?
View 2 Replies
View Related
Mar 12, 2012
Bought the AE1000. Hooked it up to my desktop computer (Sony VAIO), and it immediately recognized my wireless network in my house. However, when trying to log on, it asks for the network key, which I correctly enter and it attempts to log on, but fails to connect! I have called Linksys, and they claim it is my ISP's fault. I called Comcast (My ISP) and they claim it is a faulty product.
View 3 Replies
View Related
Oct 12, 2011
I've recently bought an AE2500 wireless adapter, and I've had problems setting it up, I've checked my port drivers versions and they're all up to date, I have looked over countless websites figuring out why it is doing this, my computer is a Windows Vista, and my last resort is formatting the computer, I've been here for countless hours trying to get this to work, when I run the disk with the adapter, it gets stuck at "Detecting Adapter" and ends up coming up with "Cannot find wireless adapter" or something really close to that. I've tried switching it to all of my USB ports, and nothing is working!
View 5 Replies
View Related
