I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:
1. Does the appliance has any license coming with it or we need to order the license separately?
2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ?
We have an installation of Cisco Prime LMS 4.1 soft appliance on VMware and i would like to ask if it is possible to backup the database on an external drive other than the 'local' LMS hard disk.
View 3 Replies View RelatedI am trying to setup prime LMS 4.2 with a pair of soft appliance. As I understand that HA is possible with the use of veritas/vmware for windows/solaris; I was wondering what are the possible high availability options available with a pair of prime LMS appliances? Can it form active/secondary with data synchronization/data redundancy of the LMS on top of the traditional backup/restore of the lms?
View 1 Replies View RelatedI have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance). The customer would like to know if LMS 4.2 is compatible with his backup agents :
* Symantec Veritas Netbackup (v7.1.0.2)
* Control-m (v6.4.01.300)
If not, what would be the best solution to backup the server ? Are the VMware tools supported now ?
using a Cisco 5508 controller (code version 7.4.100.0) with an ACS appliance running version 4.1 or 4.2?I've found that the ACS constantly reports a 'Bad request from NAS' (Invalid message authenticator in EAP request). message. This usually indicates a mismatched shared secret but this isn't the case.The controller works fine opposite a Microsoft NPS Radius Server.
View 6 Replies View RelatedI am proposing the Cisco Prime LMS 4.1 (i.e LMS-4.1-500-K9); Do I need to add the HUM license for monitoring or does that come inbuilt?
View 1 Replies View Relatedwe are installing cisco Prime NCS 1.1 and we are facing some issue for License.
I would like to clarrify the below licneses.
L-WCS-NCS1-M-K9
L-PINCS11-300-U
L-PINCSW11-300-U
I'm Facing some problem on Prime Infrastructure 1.2 NFR, when I add the NFR License to NCS, it show error "Unknown feature (PC_HIGH)."
View 1 Replies View Relatedif i have a LMS server the newest version, and i bout Nexus 7K with its DCNM ver 5.2 (DCNM-N7K-K9) can i install the (DCNM-N7K-K9) license on the Cisco Prime LMS 4.1 Base so that i can manage Nexus through LMS?if this works Can I manage all Nexus switches also?
View 5 Replies View RelatedCan i install Cisco prime infrastructure 1.3 with 1.1 license.To be more precise it will be fresh installation but the licenses I have is of 1.1.As per my overview from Cisco prime Infrastructure 1.2 NCS and NCS(WAN) has been bundled into one service.But both were separate entities in Cisco Prime Infrastructure 1.1.
View 7 Replies View RelatedWe are going to implement high availabilty in 5508 WLC with version of 7.3.101 . We will be using Prime infrastructure 1.2 for monitoring purpose.With Prime, whether we can monitor and manage redundant WLC also or only active WLC?.
View 3 Replies View RelatedI have installed Cisco Prime Infrastructure 1.2 separately from LMS4.2. LMS4.2 is in production. I just want to run PI1.2 in parallel with LMS4.2 before migrating to PI1.2. Currently I have LifeCycle permanent license. Why don't I have the assurance lfeature set license. it is running in evaluation mode.
View 6 Replies View RelatedWe currently support multiple companies' infrastructure on a single Prime Infrastructure 1.2 server. We are using lifecycle licenses. Is it possible to assign licenses to various Businesses? For example, can I upload 100 licenses for Company-X and 100 licenses for Company-Y and when adding devices into Prime, tell it which licenses pool to pull from? Could something like this be accomplished with virtual domains?
View 3 Replies View RelatedI wish to purchase Cisco Prime LMS 4.1, particularly Cisco part # R-LMS-4.1-500-K9 which support 500 Cisco nodes.We have about 360 Cisco switches/routers/ASA/FWs/WLCs so the 500 nodes license would seem to suffice for now & for future growth.We also have about 200 lightweight APs that are managed & monitored by our WLC/WCS/Navigator environment.According to the device support documentation for LMS, it supports and I assume will auto-discover these APs.Does that mean these APs will use up node licenses on LMS even though management of the APs is done by WLC/WCS? If so is there an easy way to suppress discovery of APs by LMS so we don’t have to purchase extra node licenses for LMS? Or, does LMS offer additional support features for wireless APs not already offered by WLC/WCS/Navigator?Just trying to understand how many network node licenses for LMS I have to purchase.
View 3 Replies View RelatedI have installed Cisco Prime Infrastructure 1.2 separately from LMS4.2. LMS4.2 is in production. I just want to run PI1.2 in parallel with LMS4.2 before migrating to PI1.2. Currently I have LifeCycle permanent license. Why don't I have the assurance lfeature set license. it is running in evaluation mode.
View 1 Replies View RelatedI have WLC 5508 with 12aps license, i will buy a new license with 50 Aps, my question, its possible add new license with 50 aps, totaling 62 aps licenses?
View 7 Replies View Related5508 W LAN controller with 50 AP License upgrade from 7.0.220 to 7.4 is it will effect to the license and configuration? Because the license came pre- installed.
View 1 Replies View RelatedI recently bought a Cisco 5508 WLC with SWC5500LPE-K9-70 and a Cisco 1262 AP with AIR-OPT60-DHCP vender class identifier .How can I check wether the SWC5500LPE-K9-70 is included on the 5508 wlc and AIR-OPT60-DHCP on the 1262 ap?
View 5 Replies View RelatedI am planning on installing Clean Air Wireless network, using WLC 5508, WCS(with plus license) and MSE.
Which MSE license i need to get this to work ?
I wanto delete the Evalution License and i want to activate the permanent license. find the attached snapshot of License.
View 7 Replies View RelatedI have Prime 1.3, two WLC 5508 and 8 switches 2960s I try update my devices through Prime, but I can't.
When I start "Upgrade Analysis" and select switch (Catalyst WS-C2960S-24PS-L) and image (c2960s-universalk9-mz.150-2.SE2.bin) then click to "Run report"
Prime shows me that "Image not Applicable for this Device" I try different images, but it does not work.
And with WLC 5508 the same trouble. Why Prime can't do right analysis and updates devices?
I have newly deployed a Prime Infrastructure (PI) in my network, and i want to add my wirless controller in it. I get an error SNMP time out whenever i add my controller to PI through SNMP.
There are default SNMP configurations in the controller and i am simply adding them in PI with their private/public SNMP string.
WLC 5508 is connected to my core switch and PI is connected to another switch which is directly connected to core switch via Layer 3.
Is there any configuration required to be done on the switch side.?
I am looking for a "no marketing babble" explanation of what exactly Cisco Prime Infrastructure does, that the built in 5508 Wifi administration console and Cisco Network Assitant does not do.I already use the "Cisco UC560 Configuration Assistant", the "Cisco Network Assistant" for our switches, and the "Wifi 5508 web admin console", and I am fine with that.At another site where I work, that is now going with Cisco Wifi, it is suggested that "Cisco Prime Infrastructure" be purchased.Is it important to me to have a "single pane of glass" view of the entire network? NO IT IS NOT.
All this marketing babble about having everything converged and accessible for mobile BYOD users. Yeah, that's great, but what is Cisco Prime Infrastructure actually going to do about all the mobile wifi devices coming in to the network that MUST use a web proxy to get out of our network? Many don't deal with proxy.pac correctly or don't read it at all, unless that function is explicitly turned on, by the individual device owner, in an often hidden location in their device settings. I am mainly looking at the $3000 a year price for Prime Infrastructure and going, no way, the Cisco Network Assistant and 5508 Wifi web console that are thrown in for free with the new hardware is fine with me.
We are currently running WCS but have built a new Prime Infrastructure 1.3 system from scratch on a brand new server, we have sucessfully migrated the old WCS database on to the new Prime server and as a test I have pointed 1 anchor controller to it. Possible to point the WLC's to both WCS and Prime Infrastructure concurrently - I was thinking that it would be a quick fallback if we has any problems with Prime (I know there have been some!) We are not running MSE but we do have mobility groups, the WLC's are 5508 running 7.0.235.3 .
View 0 Replies View RelatedWhen performing an audit from NCS Prime 1.3 on our 5508 controllers (500 lic) we are getting mismatch messages from many of our 3602i AP's that say the following...
(Type)Configuration Name Audit Status Attribute Prime Infrastructure Value Controller Value
(AP APname, Interface) 802.11a/n Mismatch Spectrum Intelligence true false
These AP's are not configured as Spectrum Intelligence on the controllers, rather as local. It seems that NCS believes that they are supposed to be SI. We have refreshed the config from controller many times but this does not change. The 5508's run v.7.2.111.3 Is there a change I can make on NCS or otherwise to make this mismatch go away? Is this a bug? It is not causing any problems (that we can see) but as most would rather not have these mismatches.
I'm trying to do configuration archiving in Prime Infrastructure 1.2 with a 5508 WLC (7.4).The job always fails (Admin -> Background Jobs) with the following error (see attachement):"SNMP: Failed to establish SNMP connection xxxx - Cause: Device is Unreachable. Check the ReadOnly community string." I double checked the SNMP credentials, they do match. For testing I also added a Public community just for the PI. Same result.Am I missing something?Is this not intended for Wireless Controllers?
View 5 Replies View RelatedWe have an ACE Appliance in a DMZ and the ACE Appliance's Admin Context IP is translated between ACE and ANM. The ANM Server does not get translated. It is just the opposite then in another Community discussion.
Our Problem: When adding the ACE4710 Appliance to the ANM imported Device List, we use the ACE's NATed Admin Context IP. Import works well, but ANM reflects the Admin Context IP with it's real configured IP. Polling the ACE Appliance does not work therefore.
Is there a possibility of telling the ANM, that the ACE has to be polled through a NATed IP? I could not find a field to set a NATed Mgmt IP.
Configured IP on ACE Admin Context: 192.168.0.10
NATed ACE Admin Context IP: 172.16.0.10
Imported ACE with IP 172.16.0.10 into ANM, but ANM polls for Rserver, Vserver, Probes, etc. via 192.168.0.10 - which is not reachable from the ANM.
I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedI’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
I have two Cisco Location Appliances 2700 devices that has version 6.0.101.0 on. I'm having problems getting it to work. Any that can assist with this?
View 1 Replies View RelatedThe compatibility matrix shows no support for a Location Appliance 2700 for any version 7.0.x.x for WCS and WLC. However, I did see a thread here where a v6.0.x.0 had compatibility. v6.0.202.0 is MD. Is it compatible with v7 WCS and WLC?
View 3 Replies View Related