Configure Actiontec PK5000 As A Repeater?
Nov 23, 2012I've recently switched to a Verizon hotspot. For additional range while I'm at home, can I configure my Actiontec PK 5000 as a repeater for the hotspot signal?
View 2 Replies
ADVERTISEMENT
Broadband :: Actiontec PK5000 Drops Signal 7 To 8 Times Every Day?
May 10, 2012Why do I have to reboot my Actiontec gateway 7 or 8 times a day? Is this normal now days with any of the DSL services? I have Century link New computer.
View 1 Replies View RelatedSecurity / Firewalls :: Temporarily Disable Actiontec PK5000 Router?
Mar 15, 2011In order to get my wireless printer up and running I need to temporarily disable my actiontec PK5000 router.
View 11 Replies View RelatedHow To Configure Ea4500 To Pk5000
Jun 30, 2012Can a Cisco / Linksys EA4500 connect wired to a PK5000?
View 1 Replies View RelatedHow To Set Up Or Configure A Repeater To Extend Wifi
Oct 31, 2012im just want to ask a favor if you can guide me to set up or configure a router repeater to extend my wifi at my home. i dont have a specific brand of repeater yet.. im planning to buy but i have no idea how to set up a repeater by myself.
View 1 Replies View RelatedConfigure Wireless Router To Work As Repeater?
May 14, 2012I have here a canyon wireless router. do you know where I can find online a tutorial or manual on how to configure a wireless router so that it acts as a repeater?
View 3 Replies View RelatedBelkin Routers :: Use / Configure F7D8301 As Repeater?
Jan 8, 2013I just got UVERSE and they supplied a new router (or is it a gateway) and my F7D8301 is excess to me. Is there a way to configure the Belkin router as a repeater?
View 1 Replies View RelatedD-Link DWL 2000AP+ / Windows - Configure Wi-Fi WAP As Repeater?
Apr 2, 2013I have Dlink DWL - 2000AP+.
What I want to do is, to reproduce WiFi signal (from TP-LINK modem) by repeating with D-Link Wireless Access Point.
Here is how web interface looks. There is an option for repeating:
After clicking Site Survey I see all list of available networks. When I select one of them, the D-link saves changes then reboots. After that, Windows shows me something like that on available WiFi networks list:
<Repeated network name> 2
The problem is, when I connect to this network, Windows connects directly into root source, not to my WAP (I see this with inSSIDer utility).
Cisco Wireless :: Install / Configure Another 1142 As Repeater?
Feb 4, 2013configuring 1142 ap for using centeal dhcp.Now i try to install another 1142 as a repeater for first 1142 point.
Here is root config:
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname 3floor
[code]....
Linksys WRT54G Router / Configure A Repeater For A PPPoE Connection?
May 3, 2011I am using a PPPoE connection using a linksys WRT54G router (working perfectly) and am now trying to set up an Edimax EW-7206APg to extend my wireless connection range. I followed the instructions given on the Edimax manual, and while my devices (iPad, laptop) got connected to the new repeater network, I could not access the Internet from it. I may be wrong, but the instructions on the Edimax manual seemed to be for a DHCP connection. Is there anything different I need to do to configure the Edimax repeater on a PPPoE connection?My router IP ("Local IP address") shows 10.10.0.1 instead of the "192.168.1.1" that all the documentation online seems to suggest.
View 6 Replies View RelatedNetgear Wgr614 Wireless Router - Configure AP WG102 As Repeater
Aug 5, 2012I have a Netgear WGR614 wireless router connected to my WOW DSL modem and utilize WPA as security. wireless signal is good on first floor but drops significantly in my basement. I have a Netgear WG102 AP I would like to configure as a repeater and place in my basement to boost the WGR614 signal strength. What configurations must I apply to both or either devices to achieve this setup?
View 3 Replies View RelatedD-Link DIR-655 :: Configure To Join Existing Wireless Network As Repeater
Jan 29, 2011I'd like to give my DIR-655 (rev. A4, firmware 1.32) to my brother for use as a repeater, to work with the weak signal in his apartment. But I don't see any way to configure the device to join an existing wireless network. Am I wasting my time?
View 7 Replies View RelatedLinksys Wireless Router :: Configure WRT54G As Repeater Signal Of WRT120N?
Jan 2, 2013Is it possible to configure the WRT54G as a repeater signal of the WRT120N?
View 1 Replies View RelatedLinksys Wireless Router :: EA6500 How To Configure As Base Station For Repeater
Oct 20, 2012I would like to use my new EA6500 as the base station and another wireless router with Wireless Repeating Function as a repeater. Is the EA6500 capable of that?? I have not found any documentation on that subject.
View 6 Replies View RelatedConfigure Tplink Modem On Repeater Mode In Order To Repeat Signal From (Huawei)?
Dec 4, 2011That's y topology:
(TPLINK) /////////////// (Huawei)--->(internet)
...................wirless................cable
I want to configure my tplink modem on a repeater mode in order to repeat the signal from (Huawei) ...
Linksys Wireless Router :: Configure Access Point As Repeater For 2.4 GHz Band On WRT610N?
Jun 22, 2010I'm very dissatisfied with the range and signal strength of my new WRT610N dual band router compared to the WAP54G Access Point I used before.Can I configure the Access Point as a repeater for the 2.4 GHz band on the WRT610N if I use the WRT610N as a Wireless G router rather than wireless N?
View 5 Replies View RelatedCisco Wireless :: WAP 4410N Network - Configure One As Access Point And Rest As WDS Bridge / Repeater
Sep 5, 2011I have 12 wap4410n to enable wireless connection to a school building with 3 floor. I planned to configure one as a Access point. My doubt is in which AP mode i have to configure the rest as WDS Bridge or WDS Repeater other mode. In each access point i have Ethernet connection to the switch.
View 1 Replies View RelatedEnabling Wifi On Pk5000 While Connected To Different Network?
Jan 25, 2012I have the pk5000 router but the wifi is off. I am connected to another network so is it possible to somehow access my router to enable the wifi?
View 3 Replies View RelatedRouters / Switches :: Actiontek PK5000 - No Updates For The Firmware Available?
Jun 6, 2011I have an Actiontek pk5000, and it disconnects wifi every few minutes, I have this computer hooked to ethernet, and it still works, but my macs, and tablets won't connect wirelessly I have rebooted the modem 6 times now, and I get about 5 minutes of internet every time I reboot. I have tried to upgrade the firmware on it, but it says there are no updates for the firmware available for the router.
View 3 Replies View RelatedPK5000 - Unable To Set Up File Sharing Between Wired PC And Wireless Laptop
Jan 29, 2011After reading posts in this forum and others, and reviewing MSFT tech docs, I'm still not able to establish file sharing between the wired PC and the wireless-connected laptop. Maybe I'm working under some stupid assumptions. I am able to ping each computer by their IP address - I can ping the laptop from the desktop, and vice versa. The desktop shows the Basecomputer under network places, but on the laptop, nothing at all shows up under network places. Laptop missing something?
The details:
a) Connecting to internet via DSL, Qwest ISP, Actiontec PK5000 Advanced Networking Network Router. Advanced Networking router, to me, means that home networking shouldn't require any other hardware. Stupid assumption?
b) Desktop PC is connected to the modem/router via ethernet cable
c) Laptop is connected to the modem/router via wireless, (Dell Wireless WLAN 1350 WLAN Mini PCI Card). Assocation tab of the wireless properties gives the network authentication/data encryption types as Open/WEP.
d) Some settings of the modem, viewed via the browser (192.168.0.x)
- Wireless security type: WPA
- MAC authentication Enabled
- Firewall security level: Off (NAT only)
e) Desktop PC is Windows XP Home Edition, SP 3
f) Laptop is Windows XP Professional Version 2002, SP3
g) Both are running Windows Firewall; File and Printer Sharing is checked for both, under the Exceptions tabl
h) I ran the Network setup wizard for both, using same Workgroup name, called HOME. Desktop is called BASECOMPUTER, and Laptop is called LAPTOP. No errors in the setup. On the desktop PC, under Windows Explorer, Network Places -> Entire Network, I can see a 'Home' network under a Microsoft Windows Network icon, with the Basecomputer listed. However, LAPTOP is not listed. This is after a couple of restarts.
i) ipconfig and nbtstat ouput
From the desktop:
Windows IP Configuration
code...
Linksys Wireless Router :: Connect Wrt54 To PK5000 (DSL Modem)?
Feb 17, 2012I ran a cat5 from my house which has the dsl modem to my workshop; about 120ft.I can plug that cable into my pc and get internet. But if I plug the cable into the Linksys, and the a cable from the Linksys to the pc, no internet connection. How to configure the Linksys so that I can connect it to my PC? I also want to connect my Verizon wireless Network extender to the Linksys.T
View 2 Replies View RelatedRouters / Switches :: How To Turn Off Ports For Torrenting On Qwest Pk5000 Modem
Oct 7, 2011Ok, my roomate is hogging the bandwidth on our shared router downloading junk. I'm not sure if he's using a torrent, but just in case he is here is my question:How do I turn off the ports for torrenting on my qwest pk5000 modem? Is there anything else I can do that would work as well?My friend reccommended I turn off every port after 9000 or something.
View 3 Replies View RelatedLinksys Wireless Router :: Configure E2500 As Router And WAP54G As Repeater?
Dec 28, 2012Is it possible to configure a E2500 as router and WAP54G as a repeater? I used to have a WRT54GS as router but it has broken and now I bought a E2500 to replace it.
View 2 Replies View RelatedActiontec MI424WR Won't Allow 2nd Login
Apr 28, 2012Just upgraded to Verizon FIOS and had an Actiontec MI424WR Rev F router (firmware v.20.10.7) supplied. Went to white-list my ereader's MAC in router and intitial page asked me to change the default login and password which I planned to do anyway. I know what I changed them to. Made changes, logged out, then decided I really wasn't comfortable with WEP and went back to change it to WPA. All I got was "Login failed, please try again." Finally hit the reset button and started over at the "please change login and password" screen. I can get in then.
I've been through this six times now and cannot get past the initial login without a hard reset. Tried keeping "admin" as the login because I have met peripherials that are touchy about that. Not a major issue now that I have the router set up to my satisfaction, but it frustrates me to not have password access to any part of my system. (Yes, I am that anal.)
How To Setup Actiontec Modem
Jun 10, 2011I'm purchasing an Actiontec GT724WGR Universally Compatible 4-port ADSL Wireless Gateway to be used strictly as a modem with Qwest DSL. I'm also purchasing an Asus Black Diamond Dual Band Processor, Hardware NAT, 5 Internal Antennas, Fast Gigabit Ethernet and 128MB DDR2 Wireless Router (RT-N56U) to be utilized a my primary router.My question is how do I set up the Actiontec modem to be strictly used as a modem without the wireless g function transmitting since I will be using the ASUS as the primary router? Or do I just let both of the transmit as routers together?
View 3 Replies View RelatedActiontec GT701-WG - Setting Up DHCPv
Aug 30, 2011How to set up DHCP correctly on my Actiontec GT701-WG router?
View 14 Replies View RelatedActiontec V1000H No Request Found?
Sep 19, 2012I tried to forward a new port on my Actiontec V1000H router. I was able to sign in without incident, but the moment I tried to begin navigating within pages, I would be greeted with a red screen reading '400 Bad Request - No request found' roughly 60% of the time. Usually refreshing the page a number of times would allow me to proceed, but because the Telus software for the V1000H cycles through so many pages when applying a new forwarded port to the firewall, it's almost statistically impossible to make it through.I have no issues with internet connectivity, and having this port forwarded isn't critical, but this problem is a real nuisance as it turns changing any router settings into a long, tedious, and sometimes downright impossible chore.
View 5 Replies View RelatedXP Laptop Won't Connect To Actiontec C1000A
Dec 10, 2012I have Centurylink DSL as an internet provider. They recently replaced my old Actiontec GT701-WG with an Actiontec C1000A. Since upgrading the modem, I can't get my XP laptop to connect. I can get an iPad, Vista laptop, a Windows 7 laptop, and a WII to connect using the exact same settings I had on the old Actiontec.I've set the C1000A to WPA/WPA2-PSK and TKIP/AES. I do not have an access list enabled. I set the SSID and key to the same settings I had on the original Actiontec. I've upgraded the drivers on my XP laptop to the latest version. I can see the SSID in my list of networks but when I try to connect, it just sits there saying connecting. I've set up my old Actiontec as a wireless switch and can connect with the XP laptop without any problems. I've also connected to a Netgear 802.11N wireless router at another location without problems.
View 7 Replies View RelatedUpdate Actiontec GT701-WG Firmware?
Dec 8, 2011I would like to turn on the wireless capability on my Actiontec GT701-WG, but the firmware is old and the tutorial on CenturyLink's website looks nothing like the set-up page I get. I'm nervous about updating the firmware
View 4 Replies View RelatedFrequent Disconnects With Actiontec V1000H Gateway?
May 6, 2011I've recently bought an Actiontec V1000H gateway from Telus because my previous gateway burnt out. It seemed to work fine at first, but then I started getting disconnected at random. The only way I have found to fix this issue temporarily is to ipconfig /release and /renew.
View 5 Replies View RelatedActiontec GT724WGR - Can't Access Router Settings
Jun 26, 2011I bought an Actiontec GT724WGR. I downloaded the latest firmware and went to install it. When it finished, I got the confirmation box and it gave me the click okay to restart option. I clicked okay, and when the router power cycled, the Power light stayed amber. I can't manually reset the setting back to default with the reset button. I can't access the router settings.
View 1 Replies View RelatedActiontec V100H - A New Router Incompatible With Vista?
Sep 11, 2011We recently moved to a place with included internet that was going through a wireless network. All of my devices connect fine, no problem (iPhone xbox and USB adapter) but the lady friends laptop wont connect. It recognizes the network, connects to the network after the password has been entered but will not "give out" any internet. Signal Strength is very good (router is maybe 20 feet from us). All the drivers for the wireless adapter in her laptop are up to date and it will connect to other networks, like at her mom's. This is a newer router and funny enough we actually used this exact model at our last place and it had no problems with this. After calling our landlords ISP they said that there may be a problem with the compatibility of her laptop (its only 3 years old and connects to other networks fine) with the router, yet it connected to the same model not 6 months ago.
People we are at wits end and I am . As my username states If I cant find a fix for this I will enjoy smashing this thing to bits.
FYI: the router is an Actiontec V100H
NIM-100 / MI424-WR / Installing New Actiontec With Multiple Modems?
Aug 4, 2012I have a problem with a new Actiontec modem from Verizon FIOS The past few years I've had two cable modems working fine for verizon fios. Both were the NIM-100 from Motorola.The second "slave" cable modem is connected via coax cable.I recently replaced the primary NIM-100 and the associated wireless router with the new Actiontec modem MI424-WR IN viewing the network connection via the Actiontect control panel, it shows the other slave modem connected via coax but claims that the status is "Cable Disconected"
View 3 Replies View Related