Slow Wi-Fi N On Linksys E3000?
Aug 16, 2011LAN on my Linksys E3000 is very fast but wifi N is slow. copying a 4GB file from WLAN (Intel Wifi 1000) to LAN is about 5MBps, using 2.4GHz and disabling UPnP. reset and reboot do not work.
View 2 RepliesLAN on my Linksys E3000 is very fast but wifi N is slow. copying a 4GB file from WLAN (Intel Wifi 1000) to LAN is about 5MBps, using 2.4GHz and disabling UPnP. reset and reboot do not work.
View 2 RepliesIt seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow. And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes). But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.
View 8 Replies View RelatedI have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.
1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?
2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?
Operated 802.11N connection between Linksys E3000 and Atheros AR9825 at 150Mkbs? Can't get faster than 65Mkbs. AR9825 is in Sony Vaio laptop, have used multiple drivers that produce maximum of either 54 or 65 Mkbs. E3000 has current firmware (1.04). AR9825 uses only 2.4Ghz frequency, claims max speed of 150 Mkbs. Running Windows 7 SP1.
View 5 Replies View RelatedI came home yesterday and my Internet was really slow. I later found out that it was due to my Linksys E3000 because if I bypass my E3000 and go directly to my cable modem, it work just fine.I tried reconfigure, update firmware, factory reset and none of these has worked.
View 8 Replies View RelatedMy Cisco E3000 has slowed it's Ethernet speed so slow that it times out when going to Facebook, YouTube or any site that is complex. It worked fine until one day it just gave up. It's connected to DSL Modem with Ethernet To a Apple Mac G5 power PC There are two other older macs connected via Ethernet, same problem. When I took the router out of the chain, and connected G5 directly to modem, normal internet speed. My firmware is up to date. Both wireless bands work great. When I look at Cisco Connect, everything looks normal. factory settings.
View 7 Replies View RelatedI just purchased an E-3000 and when I log into the user interface it seems changing pages and saving settings takes forever. I click on a section in the router menu and it takes what seems like 30 seconds for the page to change or accept the new settings. It's not my browser it's definitely a Linksys Router issue. I updated to the latest firmware and latest Cisco Connect software as well. Is this slow user interface a normal thing with these routers?
View 1 Replies View RelatedI'm having very slow file transfer speeds between the 2 computers on my network. One is a gigabit pc wired (cat6) to the e3000. The other is a wireless N laptop. Both computers running Win7. Speeds are like 1.5 - 2 MB/s. when I connect the laptop to the router with a cable (cat6) I get proper high speed. Trying to figure out if it's a problem with the router or windows or what. Speedtest.net says I'm getting 16 MB/s DL wirelessly to my laptop. Shouldn't wireless N be capable of higher speeds than 1.5 MB/s?? Tests are done approx 10 feet from the router.
View 1 Replies View RelatedWill this router ever see a firmware update so that we can have some additional functionality? The version of Twonky Media server that was bundled with this router was old to begin with, and now we are stuck with it? I tried the E4200 but it just kept spinning my drive that's parked in a ThermalTake BlackX, at least the 3000 doesn't do that, but when can we expect some new firmware, it's been 8 months. I used to love Linksys, but with this kind of support I may have to move to a different brand, and I bet I am not alone. it doesn't break the E3000 like you broke the 4200.
View 1 Replies View RelatedI'm active duty military, currently overseas.I have a wireless connection and recently purchased a Samsung HT-E5500 home theater system. I'd like to be able to stream Netflix but understand that I need a VPN with a US ip address to get it to work. Any VPN service I can use, and how to configure it with a Linksys E3000 router, so that I can use it with both my computer and when connected to the Samsung system?
View 1 Replies View RelatedI am getting a little frustrated. I know how to access my router's configuration and under Access Restrictions I am trying to block a URL. However, after I enter the URL and save the settings, it does not block. I have enabled the policy, but still no can do.
View 1 Replies View RelatedJust checked that my ISP provides me with two Static IP's, called them and they confirmed its running, however the modem that they gave me only has one ethernet port, to which my Linksys E3000 is connected. I am trying to set up this new IP and dedicate it to my new WHS 2011 machine, so I can remote manage it. It having a static IP of its own isn't much of a problem, but I would like to know how to do so.
View 1 Replies View RelatedI have a Linksys E3000 Duel Band router running on 12mbps of cable internet service. I just did an inventory of my household. I was in SHOCK!!! 20 frigging items that are setup to connect to the router.Items are: Wireless Printer, 3 Phones, 5 Laptops, 3 Ipod Touches, 2 Ipads, Nook, Kindle, Roku video streamer, Wii, Xbox 360 and one LAN wired desktop.I keep having issues with these in no particular order getting network error message and not working. I am rebooting the cable modem twice a day at times. Is this normal? Is there anything out thereconfigure my router for optimal performance and security. I would like to have the roku and xbox360 (espn live video) to have the most bandwidth so there is limited to no buffering for watching the video streaming
View 1 Replies View RelatedI have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?
I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.
View 9 Replies View RelatedI had a Linksys Wireless-G router for a long time and had very good luck with it. However, I ended up getting a couple of Wireless-N devices and wanted to get a different router. I bought the Linksys E3000. I got it home and set it up, and at first it worked. Then it would all of a sudden drop everything connected to it. I would restart the router, and in short order it would drop all connections again. This completely baffled me for awhile, until I actually touched the bottom of the router, and it was quite hot. I had it laying flat on a a table, so I could never understand why it was getting so hot. Anyway...I stood it up on it's side and it worked for awhile. Then it would randomly drop various things connected to it. The last straw was when I was listening to internet on the Apple TV, while viewing the internet on my PC and it started dropping the connection every five minutes. Anyway, I have now hooked my Wireless-G Linksys back up and it is working great.
is Wireless-N even needed? I live in a small place, so I don't need it to reach a long distance, and I don't transfer a tremendous amount of date wirelessly, so that doesn't really matter. Should I even try to fix this router? I looked on the Linksys page and I am running the newest firmware.
There are 2 ps3,a wii ,2 laptops,3 desktops,2 dsi.We have been having issues for a while now with losing connection and the service provider says there is nothing wrong. the modem is a comtrend ct-5072t and the router is a linksys E3000. The E3000 is the 3rd router I have bought in the last yr and 1/2 the last was a d-link dgl4500 gaming router the modem is new a rentel from the provider. Downloading updates for the ps3s are a nightmare online games like arma2 and battlefield 3 are a pain because we are losing connection all the time dont know what to do.
View 4 Replies View Relatedmy linksys e3000 router loses connection quite often. E.G. we lost power last night and i tried resetting the router but it didnt work so I had to uninstall and then reinstall the router. A few other times it would lose connection for no apparent reason.
View 8 Replies View RelatedI bought a Linksys E3000 Router. I have hooked it up and connected my PS3, laptop, iPad, 2 guest laptops on occasion with no issues. However, my fiancee's laptop will not connect to the internet. It connects to the network fine, just not to the Internet. I keep getting the same error "Cannot communicate with Primary DNS Server". She is running Windows Vista SP 2. I tried all three of the solutions suggested by Vista, but they all failed. I also did a hard reset of the laptop, router, and modem. Waited a little while with everything unplugged. Still cannot connect to the interent and get the same error message.
View 14 Replies View RelatedCannot get my laptop to see the Internet.
View 4 Replies View RelatedI want to get a Linksys E3000, mainly because it stomps all over the competition in this bracket for wifi throughput.But I have forgotten how to set up the DG834G to act as a modem for the E3000 going from the DG's LAN port to the E3000's ethernet WAN/Internet port?
View 5 Replies View RelatedI have an e3000 that cannot obtain an address from the ISP. I can get an address on the computer and an old router by directly connecting the cable to the computer or the router. I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router. I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work. It worked fine on Saturday until a bolt of lightning hit close to the house. Since then, I cannot get the e3000 to connect to the ISP.
View 9 Replies View RelatedHow do you set up the E3000 for ATT u-verse?
View 2 Replies View Relatedinstall linksys e3000.
View 1 Replies View RelatedI had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?
View 2 Replies View RelatedI would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?
View 3 Replies View RelatedWe have a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..
View 5 Replies View RelatedHas anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application.
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net). As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.
just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?
View 6 Replies View RelatedI lost my cd for my router e3000 any way still to use it?
View 1 Replies View RelatedI am replacing an old G setup with the above system, Not interested in anything but an easy setup if I can avoid it.Set up the E3000 yesterday and was easy right out of the box. I'll receive the 2 AP's in a couple of days. The 2 AP's are hard wired to a switch along with the E3000. Would like to have the two AP's be JUST AP's! In other words, use the WPA2 of the E3000 only. Seamless roaming throughout the house, Is this possible?Anything I need to know before setting up the 2 AP's?
View 4 Replies View Relatedwhen an external hd is connected to the e3000 via usb, that i can read and write to it, but i cannot delete files from the external drive? i have been trying to figure this out for a while and cannot delete files after i write them.
View 3 Replies View RelatedI just bought an E3000 about 30 hours ago and just unrealistically my router now doesn't want to give me any WiFi at all. I tried reset button, tried re plugin all of my system as well as pressing for short and long period the middle button that indicates WiFi is accessible. I already bought 3 linksys routers.
View 2 Replies View Related