Linksys Wireless Router :: WRT54G-TM - Upgrade To New Firmware Failed

Dec 5, 2011

I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: Firmware Upgrade Failed - WRT54G V2

Feb 28, 2013

just troed to update FIRMWARE re our WRT54G_v2
 
current FIRMWAREFirmware Version: v3.37.7
 
downloaded and tried to run 130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
 
BUT got msg' Upgrade are failed!;

View 3 Replies View Related

Linksys Wireless Router :: WRT54G Firmware Upgrade Failed?

Feb 2, 2013

I tried to upgrade firmware (I entered my model number WRT54G and hardware version 2 into Cisco menu and downloded the upgrade file they provided. My version was v2.02.7, downloded file FW_WRT54Gv4_4.21.5.000_20120220.bin . After I run the upgrade it said upgrade failed. After that I can't connect to internet and can't access the router. I tried to reset it and unplug it- no luck. From my PC control panel I see local area connections status connected, but as I said, it does not connect to Internet.

View 7 Replies View Related

Linksys Wireless Router :: WRT54G-TM / Upgrading To New Firmware Failed?

Jan 23, 2012

I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading, but doesn't work.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Upgrade Are Failed

Jul 24, 2011

I have Firmware Version: v4.21.1  and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"

View 8 Replies View Related

Linksys Wireless Router :: WRT54G Failed To Upgrade

Oct 28, 2011

I've had my WRT54G for a year few now andhave the occasional problem, were I end up powering off the Modem and the WiFibox to get a connection.So having a week of I thought I should tryand update the firmware and see if this solves the problem.I have a WRT54G Ver 2.0 and am running Win7on my main machine with IE9.I Downloaded the firmware update(FW_WRT54G_4.21.4.000_20110712), and while the update was loading I got a errormessage about Update not taken, this was while the Progress bar was about 3/4through, I click OK and waited a while to see if the progress bar moved anymore, butafter 10 min nothing appear to have happen. So I powered the box offand on again.I appear to be able to see my other PC andmy NAS drive but the WiFi and the broadband connect was gone.I reconnected my PC to the Broadband andlooked for a connection, but none that I’ve found seam to work. I found a referenceto a TFTP utility, but all the links on your site appear to be dead, so I haven’tdownload it from anywhere else in case its different to your.

View 9 Replies View Related

Linksys Wireless Router :: WRT350N - Firmware Upgrade Failed

Oct 20, 2007

When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.

View 4 Replies View Related

Linksys Wireless Router :: WRT54GS / Firmware 4.71.4 - Upgrade Failed?

Aug 19, 2012

The label on my router says "WRT54GS" and the current firmware is 4.71.4.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Firmware Upgrade Failed?

Aug 24, 2011

I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option).  I was in the process of setting it up when it wanted to do a Router Update.  Unfortunately, it did not specifically say to not do it WIRELESS.  We had a disconnection in the upgrade process.  Now the Power light just blinks.  I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site).  Also Cisco Connect cannot connect to the router.
 
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router.  I do not get any different results.

View 6 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Firmware Upgrade Failed

Feb 22, 2012

My router: WRT160Nv3
My Firmware Version: v3.0.02
Upgrade version: Ver.3.0.03 Build 3
 
 I can not upgrade, always gives the same error message: Firmware upgrade failed!

View 6 Replies View Related

Linksys Wireless Router :: Cannot Upgrade Firmware To WRT54G V5

Dec 22, 2011

My Linksys WRT54G router has been dropping out lately and I've been recommended to update its firmware as it is very out-of-date. Well, everytime I try to upgrade the firmware to it, I get an error message that says "the connection to the server was reset while the page was loading." I'm trying to upgrade the firmware through the router's site 192.168.1.1 under the adminstration tab

View 2 Replies View Related

Linksys Wireless Router :: WRT54G / How To Upgrade Firmware

Feb 10, 2012

I am trying to upgrade the firmware, your web site requires the version number, my version is V8, your site offers up to 7.2 ?

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g First Firmware Upgrade Went Bad

Aug 24, 2012

I have a wrt54g (8.1) that was acting a little funny so did some googling and followed the instructions to install new firmware. First the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), did a reset and power cycle.  Checked the information again and everything on the router setup completely disappeared.  

View 8 Replies View Related

Linksys Wireless Router :: WRT54G V1 Firmware Upgrade Failure

Mar 10, 2013

I have tried to upgrade the firmware to the latest greatest but keep getting the "Incorrect image file" error.  I bought two of the V1 units and had no trouble with one of them but the other is frustrating me.  I have reset it and even tried a tftp upgrade of the firmware but still get "Incorrect image file" even in tftp.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Died After Firmware Upgrade?

Nov 24, 2011

I have an old wrt54g (version 2) which I just downloaded and installed the latest firmware (4.21.4) and now its dead!!!!
 
factory reset does nothing, cannot connect via a wired connection, nothing.  All the lights work fine.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G - Locked Out After Firmware Upgrade?

Jul 19, 2011

I ran the firmware upgrade and hit the reset button for 30 seconds and everything went well until I went to restore my personal settings.  When I went to the router page it asked for a user name and password but the old user name and password don't work so I am locked out and can't get to the restore page.

View 3 Replies View Related

Linksys Wireless Router :: Firmware Upgrade WRT54G Required

May 16, 2012

I'm currently trying to upgrade my linksys WRT54G v1.1 router  using the WRT54G-EU_fw,0 file, however when I press upgrade it comes up with a message saying "Incorrect Image File!". The current firmware version is  v1.42.2 Is there any way to fix this so I can upgrade it?

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Download A Wrong Firmware And Upgrade It

Aug 29, 2012

I have a problem with my WRT54G V8 router.I download a wrong Firmware and upgrade it.After this my router never work again.The PC can't get IP from the router.I tried a lot of time to access to the web admin 192.168.1.1 and other IP and nothing happen.I made a lot of reset cycles, with the procedures 30/30/30 or other with the reset button in combination with the power cord.
 
Exist any other possibility to recover my router.Can I open and touch other button inside the board or something like this?

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Signal Strength Bounce After Firmware Upgrade

Dec 10, 2012

Have two WRT54G Wireless Routers.
 
-One WRT54G ver. 6, Firmware Version v1.028
-One WRT54G ver. 6, Firmware Version v2.x 
 
With the WRT54G ver. 6, Firmware Version v1.028.When I ran the android app WiFi Analyzer, I get mixed results.On my Samsung Galaxy S3, I saw my signal on Channel 2, and others around me (two on Channel 6 and two on Channel 11).On my ASUS Transformer Prime TFT201 I see the same signals, but my router signal bounces continously between the baseline (-100dBm?) and about -35dBm.
 
Plugged in the WRT54G ver. 2, Firmware Version v2.x  Channel 8.Hooked it up and got good steady signal strength. It Had 'WPA - Shared Key' but did not have the 'WPA - Personal' that was on the ver. 6. So, I had to go and screw things up. I've upgraded this to Firmware Version: v4.21.5 and guess what? I now have 'WPA - Personal'. I also have a signal is bouncing on BOTH units.
 
On my ASUS, I can see both routers. The ver. 2 AND the ver. 6 are bouncing between baseline and -35dBm, in unison. Apprently something in the ASUS does not like the later Firmwares.On my Samsung I can see the two signals - the ver. 2 on Channel 8 is stable as a rock and the ver. 6 on Channel 2 is also bouncing, but at a much slower rate! Running Speedtest.net a PC hardwired to the ver. 2 - I get 5.34 Mb/s Download and 0.47 Mb/s upload (yeah, my Internet sucks!) Running Speedtest.net through the ASUS/WiFi to the ver. 2 -  I get 2.43 Mb/s Down and 0.65 Mb/s Up.Running Speedtest.net through the Samsung/WiFi to the ver. 2 - I get 5.07 Mb/s Down and 1.07 Mb/s Up.

View 6 Replies View Related

Linksys WRT54G Router - Firmware Upgrade Interrupted

Sep 22, 2011

I was in the process of upgrading the firmware on my Linksys WRT54G router when a connection interruption occurred. Now, the router will not boot up and I cannot communicate with it.Is there a way to reset the firmware?

View 2 Replies View Related

Linksys Wrt54g Ver6 Router / How To Upgrade The Firmware

Oct 5, 2011

i have a linksys wrt54g ver6 router. i want to upgrade the firmware. so i went to dd-wrt.com typed in my router. then i found it on there list, selected it and upon reviewing it, it sucked ram 8mb flash 2mb. looking through the linksys versions, ver2 was the best one ram 32mb flash 8mb. so can i use ver2 firware on my ver6 router?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: WR1042ND - Firmware Upgrade To 3-15-4 Failed

Feb 10, 2013

Region : UnitedKingdom
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3-14-4 to 3-15-4
ISP : Primus Saver

I had it all working fine, then I wanted to upgrade the firmware. The original firmware was 3-14-4. I downloaded and applied the 3-15-4 firmware. Now when it powers on the power light is on all the time. Immediately the sys, 4, 3, 2, 1, Internet, usb and wps lights flash once. Then about 5 seconds later the 4, 3, 2, 1 & Internet lights flash once, then a second later the cycle starts again. When I connect it to the PC it starts to make a connection on the NIC, but then the router resets. Model: TL-WR1042ND, Ver 1.3 . Is there a way to reset the firmware or get it working again?

View 4 Replies View Related

Cisco Wireless :: WAP121 Giving Firmware Upgrade Has Failed

Jan 8, 2013

I get the message "Firmware upgrade has failed. Please ensure that valid entries were specified in the required fields." when I try upgrade the firmware rootfs.bin.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Failed To Obtain IP Address

Sep 26, 2011

I tried many times to connect my ps3 to the internet/playstation network so far no luck. The router I'm using is a linksys WRT54G v 2.00.8. I have no problem using my WII, PSP, or computer to go online but my ps3 cannot connect to the internet.url...The errors I might sometimes get is "failed to obtain IP adress" and most of the time I get something with unable to connect to  internet server when I am able to get the IP address
 
I was thinking maybe I shold reset my router to default settings but I'm not sure what's the way to do that or update the router? This problem also has been happening for a week now. In the previous weeks I could easily connect to the internet with no problems and all of a sudden I cannot connect anymore and this has happened a few times already in the past where I am unable to connect to the internet with my ps3 for a few days to a week.

View 1 Replies View Related

Linksys Wireless Router :: E1000 FW - Firmware Update Failed / Router Hangs?

Mar 5, 2013

The router had firmware 2.0.x(?) and I tried to update to the latest FW, according to the webpage that's

FW_E1000_2.1.02.006_US_20130115.bin
 
Hardware is E1000 v2 according to sticker on back.The firmware update failed (no reason given) and the router now hangs in limbo where all it does is flashing the power LED.I set my PC to 19?2.168.1.2 and TFTP'd the firmware over to 192.168.1.1 - no errors reported and 192.168.1.1 is pingable. Held reset for 30s, then powered down the router for another 30s. On power-up the router still flashes the power LED.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G Firmware Wants To Download As A .bin?

Mar 4, 2008

I was just online when all of a sudden i lost connection. I have a WRT54G V8 and did a quick little browse and found out it could be corrupted firmware. When i download the firmware it wants to download as a .bin file and open VLC Media player!? How do i change this or what do I need to open it with?

View 7 Replies View Related

Linksys Wireless Router :: Firmware Update For WRT54G 2.0?

Jan 1, 2012

I go to the support page for the WRT54G routers. I set the version number to version 2 and there is no firmware file to download. For every other version there is a firmware file to download but not for version 2. Where can I get the latest firmware for my router.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Won't Accept Firmware V4.21.5

Jun 4, 2012

My current unit is at  Firmware Version: v1.02.8 What can I do?

View 3 Replies View Related

Linksys Wireless Router :: Firmware Downgrade For WRT54G?

Aug 6, 2011

This seems to be an epidemic issue with LinkSys routers (with me myself running in the third such issue).This time, I would require the original firmware of the WRT54 ver. 4 series. Download links in older threads have 404d already.

View 1 Replies View Related

Linksys Wireless Router :: Cannot Download WRT54G V3.1 Firmware

Oct 2, 2011

I was playing with the router/gateway settings on my WRT54G v3.1 router....  and I managed to hose it.  I tried power cycling/ resetting it will not route my traffic through anymore...although i can still get to the setup menu.I am trying to download the firmware to flash it but.
 
A) the site says that for this v3.1 router I need to use the ancient firmware 4.21.1 and
 
B) the link to the firmware does not work !!!  it downloads an empty zip file url...
 
linksys support, if you are listening, please restore the link to the firmware  so I can try and fix my router.

View 2 Replies View Related

Linksys Wireless Router :: Firmware Ver.4.21.4 Crashes WRT54G V2

Sep 5, 2011

In hopes of fixing some "flaky" connection issues with my WRT54G V2 Wireless Router, I downloaded and applied the new firmware version released on 08/18/2011, Ver.4.21.4 for my Version 2 Router. I downloaded, went through the application process using the router's firmware update process, it said it was successful and then the router restarted and didn't work. Couldn't ping the address, constant flashing Power light, no response at all from router. Tried again, same result. Performed hard reset, same result. Tried a few other recovery techniques found on the web with no success. Finally I did the process found here [URL] This reset the router and I re-uploaded this same 2011 version. Router still broken. I ran through the process again after downloading an older version of the firmware, specifically version V3.1_4.00.7, the upload ran, and the router worked again! This was proof to me that the newest version completely BRICKED my router. I'm so relieved I was able to reset the router and manually recover, but most will never try this. I recommend Cisco retest this ASAP and pull the new release for the V2 router until they get this resolved!

View 9 Replies View Related

Linksys Wireless Router :: Right Firmware For WRT54G Version 2?

Feb 10, 2012

I need to reflash a WRT54G version 2, but on the support page I can not find any firmware. Only for version 2.2. is it the compatible also with version 2?

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Firmware Update?

Jan 25, 2012

I upgraded my WRT54G ver. 2 with the latest linksys firmware update (4.30.5). My previous firmware was 2. something. After the process i lost internet connection and i can't no longer access my router. I tried to reset the router to factory defaults by pressing the reset button for 10 seconds, but nothing happened. I also turned everything off and on again, but still nothing happened.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved