Linksys Wireless Router :: WRT54GS / Firmware 4.71.4 - Upgrade Failed?

Aug 19, 2012

The label on my router says "WRT54GS" and the current firmware is 4.71.4.

View 1 Replies


Linksys Wireless Router :: Firmware Upgrade For WRT54GS V2.1?

Mar 25, 2007

I would like to upgrade the firmware for my WRT54GS V2.1 router however, I only see versions 1.0, 1.1, 2.0, 3.0, etc.. There is no 2.1 listed, so does this mean I can use the v2.0 firmware?

View 3 Replies View Related

Linksys Wireless Router :: WRT54GS - Will Firmware Upgrade Get Me To WPA2

Jul 28, 2011

I have a WRT54GS.  It is hardware version 2 and firmware version 3.37.7.  I have it set for WPA AES security.  For that hardware version it looks like I can only upgrade the firmware to version  Will that get me to WPA2 AES encryption? 

View 6 Replies View Related

Linksys Wireless Router :: WRT54GS Connection Reset During Firmware Upgrade

May 8, 2012

I have a Linksys WRT54GS (v5) router. I noticed that my firmware was outdated and tried to upgrade it tonight. During the upgrade progress, the browser reset the connection and now  cannot access my router configuration pages.I did a hard reset. Then I did the 30-30-30 reset.
The reset worked but no matter what I do, I cannot navigate to any readable page within the router. I get the log in box and successfully log into the router. However, the configuration page(s) are all jumbled and devoid of useful information. It almost looks like a web page that needs flash to be enabled. Lots of colors and boxes but no text or links to other configuration pages
I know it's an old router but it has served me well. I would love to reinstall the old firmware (or new!) and copy my saved configuration file back to the router.Is there a way to access the configuration via a command line interface?

View 4 Replies View Related

Linksys Wireless Router :: WRT350N - Firmware Upgrade Failed

Oct 20, 2007

When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.

View 4 Replies View Related

Linksys Wireless Router :: Firmware Upgrade Failed - WRT54G V2

Feb 28, 2013

just troed to update FIRMWARE re our WRT54G_v2
current FIRMWAREFirmware Version: v3.37.7
downloaded and tried to run 130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
BUT got msg' Upgrade are failed!;

View 3 Replies View Related

Linksys Wireless Router :: WRT54G-TM - Upgrade To New Firmware Failed

Dec 5, 2011

I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading

View 3 Replies View Related

Linksys Wireless Router :: WRT54G Firmware Upgrade Failed?

Feb 2, 2013

I tried to upgrade firmware (I entered my model number WRT54G and hardware version 2 into Cisco menu and downloded the upgrade file they provided. My version was v2.02.7, downloded file FW_WRT54Gv4_4.21.5.000_20120220.bin . After I run the upgrade it said upgrade failed. After that I can't connect to internet and can't access the router. I tried to reset it and unplug it- no luck. From my PC control panel I see local area connections status connected, but as I said, it does not connect to Internet.

View 7 Replies View Related

Linksys Wireless Router :: E4200 Firmware Upgrade Failed?

Aug 24, 2011

I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option).  I was in the process of setting it up when it wanted to do a Router Update.  Unfortunately, it did not specifically say to not do it WIRELESS.  We had a disconnection in the upgrade process.  Now the Power light just blinks.  I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site).  Also Cisco Connect cannot connect to the router.
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router.  I do not get any different results.

View 6 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Firmware Upgrade Failed

Feb 22, 2012

My router: WRT160Nv3
My Firmware Version: v3.0.02
Upgrade version: Ver.3.0.03 Build 3
 I can not upgrade, always gives the same error message: Firmware upgrade failed!

View 6 Replies View Related

Linksys Wireless Router :: VPN Connection Failed When Using WRT54GS

Sep 12, 2011

Currently I have Verizon DSL and which supplied me with a Westell 7500 modem/wireless router.  I am also connecting a Linksys WRT54GS (firmware Version: 7.2.08) to the Westell 7500.
When I connect via cable or wireless to Linksys WRT54GS I am not able to establish VPN connection. I get the error “Error 619: A connection to the remote computer could not be established. So the port used for this connection was closed”.
However, when I connect via cable or wireless to Westell 7500 I am able to connect to VPN.
I tried resetting the Linksys WRT54GS to factory settings and reconfigured but no success to VPN.
At work we have a Windows 2003 setup with VPN Role on it and on my laptop I am using the built in VPN connection within Windows 7.

View 3 Replies View Related

Linksys Wireless Router :: Get Latest Firmware For WRT54GS V1?

Feb 21, 2012

I have a WRT54GS v1 router which is currently loaded with firmware version 2.07.1. I want to upgrade it with the latest firmware. Where I can find the latest firmware download for this model router? Linksys does not have it available on their site.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: WR1042ND - Firmware Upgrade To 3-15-4 Failed

Feb 10, 2013

Region : UnitedKingdom
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3-14-4 to 3-15-4
ISP : Primus Saver

I had it all working fine, then I wanted to upgrade the firmware. The original firmware was 3-14-4. I downloaded and applied the 3-15-4 firmware. Now when it powers on the power light is on all the time. Immediately the sys, 4, 3, 2, 1, Internet, usb and wps lights flash once. Then about 5 seconds later the 4, 3, 2, 1 & Internet lights flash once, then a second later the cycle starts again. When I connect it to the PC it starts to make a connection on the NIC, but then the router resets. Model: TL-WR1042ND, Ver 1.3 . Is there a way to reset the firmware or get it working again?

View 4 Replies View Related

Cisco Wireless :: WAP121 Giving Firmware Upgrade Has Failed

Jan 8, 2013

I get the message "Firmware upgrade has failed. Please ensure that valid entries were specified in the required fields." when I try upgrade the firmware rootfs.bin.

View 4 Replies View Related

Linksys Wireless Router :: Firmware Update For WRT54GS V 6 Not Unzipping?

Sep 28, 2011

I've tried downloading the binary file and on both a mac and pc and it's not working.  On the mac it looks like a normal zip file but when I click to "unzip" it it just creates another zip file.  When I download it on a pc it doesn't even look like a zip it's just a blank white square.  Both computers have always downloaded zips fine, so I'm thinking it maybe is a problem with the file?

View 3 Replies View Related

Linksys Wireless Router :: WRT54GS Not Detecting The Firmware Update

Nov 19, 2011

I currently have a WRT54GS ver 1.0 running firmware version v2.07.1Ran through the whole installation procress as described in the firmware upgrade instructions pdf and it said Successful and hit continue. Hit continue, held the reset button down for 10 seconds then powered off the router for 30 seconds and plugged it back in.My firmware version in the router is still saying v2.07.1, I would assume it should say 4.21.4?

View 8 Replies View Related

Linksys Wireless Router :: WRT54GS V1.0 Firmware - Blinking Power Light

Feb 20, 2012

No download available and none available via Linksys Live Chat or FTP and having spent the best part of the week trying to find relevant firmware on other forums I decided to come here to get answers to the following questions, hopefully from version 1.0 experienced owners or not.
#1. Can the firmware of version 2.0 and 3.0 be reduced to flash version 1.0?

#2. When diagnosing the blinking power light issue by connecting directly to the router and the network card using "ping -t" which network address do I use, or to 2xx?
I get a reply using but I'm not sure that works when using the TFTP Utility if it's the wrong address on my Laptop to ping?

View 7 Replies View Related

Linksys Wireless Router :: SB5120 - Upgrade From WRT54GS To E1200?

Aug 21, 2012

I was asked to connect directly to the modem to be sure that it worked before beginning to install the E1200.  When I connect my laptop (Win7) to an available wired ethernet port on my WR54GS I can connect to the internet.  If I unplug the internet input to the router from the modem and connect that to my computer, I do not get an internet connection.  I am using a Motorolla SB5120 modem connected to comcast.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G-TM / Upgrading To New Firmware Failed?

Jan 23, 2012

I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading, but doesn't work.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Upgrade Are Failed

Jul 24, 2011

I have Firmware Version: v4.21.1  and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"

View 8 Replies View Related

Linksys Wireless Router :: WRT54G Failed To Upgrade

Oct 28, 2011

I've had my WRT54G for a year few now andhave the occasional problem, were I end up powering off the Modem and the WiFibox to get a connection.So having a week of I thought I should tryand update the firmware and see if this solves the problem.I have a WRT54G Ver 2.0 and am running Win7on my main machine with IE9.I Downloaded the firmware update(FW_WRT54G_4.21.4.000_20110712), and while the update was loading I got a errormessage about Update not taken, this was while the Progress bar was about 3/4through, I click OK and waited a while to see if the progress bar moved anymore, butafter 10 min nothing appear to have happen. So I powered the box offand on again.I appear to be able to see my other PC andmy NAS drive but the WiFi and the broadband connect was gone.I reconnected my PC to the Broadband andlooked for a connection, but none that I’ve found seam to work. I found a referenceto a TFTP utility, but all the links on your site appear to be dead, so I haven’tdownload it from anywhere else in case its different to your.

View 9 Replies View Related

Linksys Wireless Router :: E1000 FW - Firmware Update Failed / Router Hangs?

Mar 5, 2013

The router had firmware 2.0.x(?) and I tried to update to the latest FW, according to the webpage that's

Hardware is E1000 v2 according to sticker on back.The firmware update failed (no reason given) and the router now hangs in limbo where all it does is flashing the power LED.I set my PC to 19? and TFTP'd the firmware over to - no errors reported and is pingable. Held reset for 30s, then powered down the router for another 30s. On power-up the router still flashes the power LED.

View 3 Replies View Related

D-Link DIR-655 :: Boot Failure After Failed Firmware Upgrade Through Chrome

Feb 12, 2011

I've tried to upgrade firmware through chrome, but chrome abruptly shut down during upgrade.Since that, I have not even loggin set-up menu which should be shown up putting to make it back. Amber light is just blinking on Power lamp.

View 2 Replies View Related

D-Link DIR-655 :: A4 1.32NA Will Not Upgrade Firmware / Upload Failed Error

Dec 25, 2011

first one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying Code:

View 6 Replies View Related

Cisco Switches :: SRW248G4 Firmware Upgrade Failed / Cannot Restore

Dec 12, 2012

with TFTP upgrade SRW2xxG4_FW_1.2.3.0.ros and WEB interface after the restart, the switch will not start, display HyperTerminal link. You can also restore the switches do not?

View 1 Replies View Related

Cisco Routers :: RV220W - Upgrade To Failed Due To Invalid / Corrupted Firmware

Mar 10, 2013

I have a RV220W running When trying to upgrade to I receive an error: "Upgrade failed due to invalid/corrupted firmware".
I found this article: [URL]
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
If I do a backup running, then upgrade to, then do a restore, would that put me back to  I'm trying to avoid configuring the router manually all over again. 

View 1 Replies View Related

Cisco Wireless :: Firmware Update For Linksys WRT54GS?

Nov 22, 2011

My router's last update was: v1.50.6,Feb. 17, 2006 . I use the router at home with no problems (we had a desktop and a laptop using it; now just the laptop). I purchased a Kindle Fire last week and it works fine at work, at restaurants, etc. but not at home. Some of the KF discussions I've been following suggest updating the router's firmware so the KF will recognize and connect to it. I contacted Cisco and was told that no firmware updates are available for my router since it is out of warranty. I contacted Amazon and was told that the problem was in my router.

View 4 Replies View Related

Linksys Wireless Router :: E1200 Firmware Won't Upgrade

Aug 4, 2012

I just purchased a new E1200 router with firmware version 2.0.01 and downloaded the latest version 2.0.03 and tried to install it through the router. When I choose the downloaded file and try to start upgrade I immediately get an error "The Image File is Incorrect". I redownloaded it and tried again with the same error. how to get past this and upgrade the firmware? 

View 9 Replies View Related

Linksys Wireless Router :: Can't Upgrade Firmware On E4200

Oct 18, 2012

The file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).

View 2 Replies View Related

Linksys Wireless Router :: E4200v2 Firmware Upgrade

Feb 24, 2013

 I tried to upgrade my router firmware to the latest (downloaded from cisco website) but seems like the upgrade didn't go well. I am unable to open the admin webpage. I can get to the login page on, after i enter the admin password the next page doesn't load. It keeps showing 'Waiting' at the center of the page forever.. I have tried to do the 30/30/30 reset  to no avail, i tried to do tftp downgrade to older firmware version but the tftp boot doesn't even start. Is there any other way i can either fix the current firmware upgrade or downgrade it to the previous version?

View 9 Replies View Related

Linksys Wireless Router :: EA6500 Firmware Can't Upgrade

Apr 17, 2013

This is new EA6500 and The firsttime Setup My EA6500,Download New Ver Linksys Smart Wi-Fi Router Setup,he say Your router was not successfully set up.

View 2 Replies View Related

Linksys Wireless Router :: How To Upgrade Firmware On E4200

Jul 2, 2012

I currently have  Model name: Linksys E4200 Firmware version: 1.0.04 build 11  Software version: 1.4.12100.0
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.

View 2 Replies View Related

Linksys Wireless Router :: WRT110 Firmware Upgrade?

Jul 27, 2008

I have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model ( but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".

View 9 Replies View Related

Copyrights 2005-15, All rights reserved