I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading, but doesn't work.
View 1 RepliesAfter unsuccess firmware upgrade, my router is leds always light.How I can recover it?
View 3 Replies View Relatedjust troed to update FIRMWARE re our WRT54G_v2
current FIRMWAREFirmware Version: v3.37.7
downloaded and tried to run 130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
BUT got msg' Upgrade are failed!;
I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading
View 3 Replies View RelatedI tried to upgrade firmware (I entered my model number WRT54G and hardware version 2 into Cisco menu and downloded the upgrade file they provided. My version was v2.02.7, downloded file FW_WRT54Gv4_4.21.5.000_20120220.bin . After I run the upgrade it said upgrade failed. After that I can't connect to internet and can't access the router. I tried to reset it and unplug it- no luck. From my PC control panel I see local area connections status connected, but as I said, it does not connect to Internet.
View 7 Replies View RelatedI've just attempted to uprade the firmware on my WAG325N from 1.0.6 to 1.0.12 the latest, over wireless. It will not work with Ethernet. It started to upgrade and failed with a garbled screen in my browser. No message to reset. Tried a complete reset several times. Pressing reset, power off for 30 secs. When I attempt to connect wirelessly with browser, just get a garbled screen, with no menus.
View 1 Replies View RelatedI have a little problem with my new E1200. Before the E1200 I had a WRT160N that was bricked to death by a power surge due upgrading the firmware. Till that moment the WRT160N met al the required specs as told in the description..I have from my ISP a 40Mbit cable line and was always downloading at those speeds wired aswell as wireless...
Now with the E1200 I get the 40Mbit only wired... wireless it only allows it up to max. 20Mbit.I figured that I didn't do anything different than the Linksys I had before..I'm working with a MacBook from late 2007 running OSX Lion 10.7.2, Built-in AirPort Extreme card (802.11a/b/g/n)My wireless setting with a WP2 Personal Security Mode
I have Firmware Version: v4.21.1 and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"
View 8 Replies View RelatedI've had my WRT54G for a year few now andhave the occasional problem, were I end up powering off the Modem and the WiFibox to get a connection.So having a week of I thought I should tryand update the firmware and see if this solves the problem.I have a WRT54G Ver 2.0 and am running Win7on my main machine with IE9.I Downloaded the firmware update(FW_WRT54G_4.21.4.000_20110712), and while the update was loading I got a errormessage about Update not taken, this was while the Progress bar was about 3/4through, I click OK and waited a while to see if the progress bar moved anymore, butafter 10 min nothing appear to have happen. So I powered the box offand on again.I appear to be able to see my other PC andmy NAS drive but the WiFi and the broadband connect was gone.I reconnected my PC to the Broadband andlooked for a connection, but none that I’ve found seam to work. I found a referenceto a TFTP utility, but all the links on your site appear to be dead, so I haven’tdownload it from anywhere else in case its different to your.
View 9 Replies View RelatedVideo streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?
View 3 Replies View RelatedI tried many times to connect my ps3 to the internet/playstation network so far no luck. The router I'm using is a linksys WRT54G v 2.00.8. I have no problem using my WII, PSP, or computer to go online but my ps3 cannot connect to the internet.url...The errors I might sometimes get is "failed to obtain IP adress" and most of the time I get something with unable to connect to internet server when I am able to get the IP address
I was thinking maybe I shold reset my router to default settings but I'm not sure what's the way to do that or update the router? This problem also has been happening for a week now. In the previous weeks I could easily connect to the internet with no problems and all of a sudden I cannot connect anymore and this has happened a few times already in the past where I am unable to connect to the internet with my ps3 for a few days to a week.
I just upgraded to a E3000 from a WRT54G and I am having some issues with network speed.I have no special settings and have even tried restoring factory defaults and upgrading to the latest firmware to no avail.The time I notice the biggest hit is when transferring files locally on the network (WiFi and LAN).Let me note that I do know the difference between MB/s & Mb/s and the like.I have Comcast 20Mb/s Down, 1.5Mb/s Up (just a FYI, the main issue is local transfers)
With default settings my Laptop (ASUS N82JQ, Atheros AR9285 Wireless Network Adapter), connects to the router at only 65Mb/s (with full signal).Upload seems to be more decent ~600KB/s (Transferring files from wireless n laptop to the gigabit desktop).Download seems to be limited to ~150KB/s (Copying files from the wired gigabit desktop to the wireless n laptop).These speeds are horrible! ~5hrs to transfer 3GB of data!
One of my laptops had a card that was capable of both 2.4 & 5Ghz and I was previously getting ~2000-5000KB/s (2-5MB/s) transfers with this router (But I had to do a system restore on it and reset the router). My ASUS laptop seems to only work with 2.4Ghz though. If I change the 2.4Gh Wireless settings on the router to "Auto(20MHz or 40MHz)" the laptop will connect at 150Mb/s, but the speeds are the same slow speeds as above.
When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
View 4 Replies View RelatedThe label on my router says "WRT54GS" and the current firmware is 4.71.4.
View 1 Replies View RelatedI just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option). I was in the process of setting it up when it wanted to do a Router Update. Unfortunately, it did not specifically say to not do it WIRELESS. We had a disconnection in the upgrade process. Now the Power light just blinks. I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site). Also Cisco Connect cannot connect to the router.
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router. I do not get any different results.
My router: WRT160Nv3
My Firmware Version: v3.0.02
Upgrade version: Ver.3.0.03 Build 3
I can not upgrade, always gives the same error message: Firmware upgrade failed!
I'm trying to upgrade the firmware on my BEFSR81 v3 cable router (firmware version 2.45.xxx) on a Mac. I accessed the interface via Safari browser, followed the instructions, got a message saying not to interrupt the process, but it never completed. So I tried it again (downloaded another copy of the firmware update), and same thing. No choice but to interrupt it. My internet connection seems to be working fine, but now I can't access the router via the browser. I don't think the firmware actually updated.
Should I power down the router and then reset it?
The router had firmware 2.0.x(?) and I tried to update to the latest FW, according to the webpage that's
FW_E1000_2.1.02.006_US_20130115.bin
Hardware is E1000 v2 according to sticker on back.The firmware update failed (no reason given) and the router now hangs in limbo where all it does is flashing the power LED.I set my PC to 19?2.168.1.2 and TFTP'd the firmware over to 192.168.1.1 - no errors reported and 192.168.1.1 is pingable. Held reset for 30s, then powered down the router for another 30s. On power-up the router still flashes the power LED.
I was just online when all of a sudden i lost connection. I have a WRT54G V8 and did a quick little browse and found out it could be corrupted firmware. When i download the firmware it wants to download as a .bin file and open VLC Media player!? How do i change this or what do I need to open it with?
View 7 Replies View RelatedI go to the support page for the WRT54G routers. I set the version number to version 2 and there is no firmware file to download. For every other version there is a firmware file to download but not for version 2. Where can I get the latest firmware for my router.
View 1 Replies View RelatedMy current unit is at Firmware Version: v1.02.8 What can I do?
View 3 Replies View RelatedThis seems to be an epidemic issue with LinkSys routers (with me myself running in the third such issue).This time, I would require the original firmware of the WRT54 ver. 4 series. Download links in older threads have 404d already.
View 1 Replies View RelatedI was playing with the router/gateway settings on my WRT54G v3.1 router.... and I managed to hose it. I tried power cycling/ resetting it will not route my traffic through anymore...although i can still get to the setup menu.I am trying to download the firmware to flash it but.
A) the site says that for this v3.1 router I need to use the ancient firmware 4.21.1 and
B) the link to the firmware does not work !!! it downloads an empty zip file url...
linksys support, if you are listening, please restore the link to the firmware so I can try and fix my router.
In hopes of fixing some "flaky" connection issues with my WRT54G V2 Wireless Router, I downloaded and applied the new firmware version released on 08/18/2011, Ver.4.21.4 for my Version 2 Router. I downloaded, went through the application process using the router's firmware update process, it said it was successful and then the router restarted and didn't work. Couldn't ping the address, constant flashing Power light, no response at all from router. Tried again, same result. Performed hard reset, same result. Tried a few other recovery techniques found on the web with no success. Finally I did the process found here [URL] This reset the router and I re-uploaded this same 2011 version. Router still broken. I ran through the process again after downloading an older version of the firmware, specifically version V3.1_4.00.7, the upload ran, and the router worked again! This was proof to me that the newest version completely BRICKED my router. I'm so relieved I was able to reset the router and manually recover, but most will never try this. I recommend Cisco retest this ASAP and pull the new release for the V2 router until they get this resolved!
View 9 Replies View RelatedMy Linksys WRT54G router has been dropping out lately and I've been recommended to update its firmware as it is very out-of-date. Well, everytime I try to upgrade the firmware to it, I get an error message that says "the connection to the server was reset while the page was loading." I'm trying to upgrade the firmware through the router's site 192.168.1.1 under the adminstration tab
View 2 Replies View RelatedI am trying to upgrade the firmware, your web site requires the version number, my version is V8, your site offers up to 7.2 ?
View 2 Replies View RelatedI need to reflash a WRT54G version 2, but on the support page I can not find any firmware. Only for version 2.2. is it the compatible also with version 2?
View 2 Replies View RelatedI have a wrt54g (8.1) that was acting a little funny so did some googling and followed the instructions to install new firmware. First the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), did a reset and power cycle. Checked the information again and everything on the router setup completely disappeared.
View 8 Replies View RelatedI upgraded my WRT54G ver. 2 with the latest linksys firmware update (4.30.5). My previous firmware was 2. something. After the process i lost internet connection and i can't no longer access my router. I tried to reset the router to factory defaults by pressing the reset button for 10 seconds, but nothing happened. I also turned everything off and on again, but still nothing happened.
View 1 Replies View RelatedIs there a way to restrict wireless access to my router from wireless pc's in my home. Two grandsons are off from school now, and are playing online games to the wee hours of the morning. Can I do something to have the routher shut off their connection at a certain time? Is that possible. If I have to go back to dd-wrt to do that, fine. I have lynksis wrt54g with their 4.2.1 firmware.
View 5 Replies View RelatedI have tried to upgrade the firmware to the latest greatest but keep getting the "Incorrect image file" error. I bought two of the V1 units and had no trouble with one of them but the other is frustrating me. I have reset it and even tried a tftp upgrade of the firmware but still get "Incorrect image file" even in tftp.
View 1 Replies View RelatedI have an old wrt54g (version 2) which I just downloaded and installed the latest firmware (4.21.4) and now its dead!!!!
factory reset does nothing, cannot connect via a wired connection, nothing. All the lights work fine.
I ran the firmware upgrade and hit the reset button for 30 seconds and everything went well until I went to restore my personal settings. When I went to the router page it asked for a user name and password but the old user name and password don't work so I am locked out and can't get to the restore page.
View 3 Replies View Related