Manually Assigned Ip Configurations Using Packet Tracer?
Oct 12, 2012using packet tracer, how can i find dns server ip address and i am having trouble pinging the desktops and server that i manually assigned the ip addresses to
View 2 Replies
ADVERTISEMENT
How To Find Packet Tracer 8.6.1
Apr 19, 2011i'm on the CCNA 4 accessing the WAN part for the Cisco Academy. I'm trying to do a packet tracer 8.6.1 and I'm stuck. I'm looking for the answer so I can figure out what I'm missing.
View 1 Replies View RelatedHow To Setup DNS In Packet Tracer
May 16, 2011How can I pair a html file to a domain name in packet tracer?
View 2 Replies View RelatedCisco Packet Tracer VOIP
Sep 9, 2012having some issues. My basic VOIP network I can get to work no problem uner Vlan 1. But when I try tomake multiple basic networks to connect and put them in to diffrent Vlans such as Vlan 2, 3, 4 and conect them the phones now say configuering IP.
View 1 Replies View RelatedCan't Ping Between Routers (Packet Tracer)
Mar 6, 2011I'm trying to set up a network comprised of three LANs connected by serial. As this is a small part of an assignment I've been instructed to subnet into /26 and to use /30 subnets for my serial connections.At the moment I can ping between devices on each of the LANs but I can't ping between routers at all. Embarrassingly I'm not sure why, I think it may be something I've missed on setting up the serial links as I have set routers up fine before using other connection types.
View 12 Replies View RelatedHow To Unlock The Configuration Tab Packet Tracer
Oct 25, 2011how to unlock the config tab in packet tracer?
View 1 Replies View RelatedCisco :: Packet Tracer 6 Download?
Jan 29, 2013I'd like to know if packet tracer 6 can be download yet?
View 5 Replies View RelatedCisco :: Range Of Ports In Packet Tracer
Oct 27, 2012I'm preparing myself for CCNA exam and i started doing a lot of different examples. I've got problem with Packet Tracer when i'm trying to apply some security settings for the range of switch ports in default VLAN 1. I might just demonstrate my commands so it will be easier do understand.
View 2 Replies View RelatedCisco :: Enabling PIM In Packet Tracer 5.3.3.0019?
Dec 5, 2012I am trying to test PIM SM mode between some 2811 routers built up in my packet tracer 5.3.3 .But surprisingly PIM option is not coming in the interface mode .Even IP multicast option is not shown in global config mode.
View 6 Replies View RelatedCisco :: Configuring EIGRP On Packet Tracer?
May 27, 2012I have been playing around with Packet Tracer trying to understand EIGRP and to put it into practice. Well im not doing so well, I cant get the routers to form an adjacency therefore nothing is pinging outside of the routers. [URL]
View 4 Replies View RelatedCisco :: Simulate An ISA Server In Packet Tracer?
Jan 21, 2013I'm an IT student and I've been assigned with homework simulating a network including an ISA server and some clients in Packet Tracer but I can't find anything which can be configured like an ISA (Internet Security and Acceleration) server(this is kind of Microsoft's technology as I know) in Packet Tracer, the generic Server from the devices box has only some basic services such as HTTP, DHCP, DNS, FTP, AAA, ... but none of anything related to ISA, all the servers in Packet Tracer have only 1 interface whereas the ISA server (as far as I know) should have at least two interfaces, and there is also no CLI supported for those servers so I think I can't simulate ISA server in Packet Tracer, can I?
View 4 Replies View RelatedProtocols / Routing :: Cluster In Packet Tracer?
Jan 16, 2011have 2 routers connected in cluster ith serial dte link. screenis locked. I need to draw a topology of Internet cluster, but i don't know how to discover whats is in it, because i don't have set ip
View 2 Replies View RelatedProtocols / Routing :: How To Use Firewall In Packet Tracer
Apr 5, 2013I have a project about ISP in packet tracer,I want to know how to make firewall configuration and steps I don't know how to use firewall in packet tracer at all.
View 1 Replies View RelatedCisco WAN :: Packet Tracer 5.33 Silent Install?
Mar 18, 2013I'm trying to create a silent, scripted install of Cisco Packet Tracer 5.33. At the end of the install there is a box that comes up about Packet Tracer Skills Based Assessment (PTSBA). Is there a way to supress this dialogue box? I'm using "PacketTracer533_setup.exe" /sp- /verysilent /norestart" with no luck.
View 2 Replies View Related2621XM Packet Tracer IGRP Configuration
Sep 29, 2011I am using packet tracer 5.3 version and I am trying to configure IGRP on it but it doesn't show me igrp under routing protocol selection.Router number is 2621XM.IOS version is 12.2.learn the configuration of IGRP.
View 2 Replies View RelatedCisco :: Packet Tracer - Must Block Communication Between Computers
Mar 22, 2013I'm student from IT school and i have a school project but i have a problem on packet tracer.In a vlan, i must block the communication between computers in it but i dont know how i must do that.Effectively, it's about 250 computers in this VLAN but each computer can't caommunicate between us.
View 4 Replies View RelatedCisco :: Where To Download Router Template On Packet Tracer
Oct 20, 2011Asking about Packet Tracer. I currently use packet tracer 5.3.2.Can you give me any link where to download router template on packet tracer? I want to explore cisco 2821 but packet tracer 5.3.2 has an existing of cisco 2811 only then, I tried to add the 4 ports of RJ11 but I cannot see the 4 port telphone.
View 4 Replies View RelatedCisco :: VLANs Route Outside Of Network Packet Tracer
May 30, 2012I am unable to get traffic from any VLAN to communicate outside of the router, as well as get any traffic from outside of the router to communicate with any device on either VLAN. I am able to ping the router from each device on each VLAN, and vice versa. However, the traffic seems to die at the router, and I cannot figure out why. I know it's probably a small, easy fix, but I cannot seem to find any kind of documentation on it.
View 13 Replies View RelatedCisco Firewall :: ASA5505 - Packet Tracer Output - Access Denied
Mar 16, 2013I am trying to troubleshoot a problem where in one of my remote site is not able to access some networks at HQ over Site to SIte VPN ( asa 5505 at Remote and 5520 at HQ). I ran packet tracer and HQ ASA looks clean as everything came out as ALLOW. Remote site ASA packet tracer give me DROP out at Phase 9 (VPN). I am not very sure what to look in ASA for resolution now. Is it an access list that is blocking the traffice or VPN setup.
View 5 Replies View RelatedCisco Firewall :: 5550 ASA (8.3) - Packet Tracer / Multi-Context Classification
Nov 22, 2011I've been using packet-tracer for some time on and off with mixed results.
I'm running a multi context firewall with over 10 of the contexts sharing the same outside interface / network. All interfaces obviously have valid, unique IPs and also unique MAC addresses as mac-address auto is enabled in the system context.
This is an ASA 5550 running 8.3(2.10) interim so includes the fix for the well known packet-tracer classication failed bug.
So in theory, with firewall contexts on a shared interface the ASA should use the firewall MAC address to classify incoming traffic to the correct firewall and as far as I am aware, only fall back on using NAT to classify if the interface MACs are the same. In reality on my platform this doesn't seem to be happening and the classifier is using NAT to determine the destination context. I'm seeing this with live traffic (i.e. not generated by packet-tracer) in logs and can prove it by disabling certain NAT rules (there is some overlap with the IP addressing behind each firewall).
My question regarding packet tracer is this - in the above scenario with a shared outside interface, does packet tracer ALWAYS use NAT to determine the destination context? Or does packet tracer look up the MAC address of the ingress interface according to what context you are running packet tracer from? It appears that packet-tracer is using NAT in my case which could be just symptomatic of the potential bug I've described above rather than by design.
Cisco ASA 5505 Simple PAT - Packet-tracer Can't Look At Any External Devices While Running
Sep 16, 2012here, am used to the RouterSwitch CLI but been asked to set up an ASA 5505 8.4.Quite simply I am trying to at least test out a static PAT from an external source to an internal server in a test environment and no matter whether I set it up as an auto-nat or a twice-nat whenever I run a packet tracer I end up with the same error. This is the packet-tracer I am running-packet-trace input outside tcp 80.80.80.80 3389 10.240.0.10 3389
Phase: 5
Type: NAT
Subtype: rpf-check
Result: DROP
Config:nat (inside,outside) source static server publicIP service RDP RDP
Additional Information:
[code]....
Now I have a couple of questions initially. I have made the presumption that packet-tracer does not look at any external devices while running - as in as long as the ports are up it doesn't matter what is on the end of them for testing purposes? Is there anything I am missing?I have this morning wiped the config and have simply set up the adapters, a default route and twice nat and am not sure why I keep getting the error. I am sure it is something very simple and I'm being a massive donut!
[code]...
Cisco Switching/Routing :: 3560 Topology In Packet Tracer Related To Etherchannel Configuration
May 23, 2012i have made a topology in packet tracer related to etherchannel configuration.i am using 2 3560 switches and 1 2950 switch. Now what i want is to bundle up the redundant links between these 3 switches. The links fa0/1-3 between 2950_1 and 3560_1 switches have been bundled up but when i try to bundle the links fa0/4-6 of 3560_1 to fa0/4-6 of 3560_2 it wont work. i am using channel-group 1 mode desirable between the 3560 switches. secondly if i want to assign ip to port channels then it has to be of same subnet between 2 3560 switches right and it must be same between 2950_1 and 3560_1. But these 2 subnets should be different from one another.
View 3 Replies View RelatedCisco Switching/Routing :: 3560 And 2960 - Update Switch IOS Version At Packet Tracer 5.3
Oct 9, 2012I am using Packet Tracer to simulate Cisco networking.As the existing IOS of the 3560 and 2960 switch are in older version which has no new feature in new IOS, how to upgarde the IOS of Cisco switch at Packet Tracer?
View 5 Replies View RelatedCisco Security :: Finding Security Labs For GNS3 Or Packet Tracer?
Dec 19, 2011I'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies View RelatedCisco Routers :: RVS4000 Connects To ISP Can Ping And Tracer But Cannot Browse
Sep 22, 2012Router connects to ISP but cannot browse the Internet. I have updated the firmware to 2.0.3.2 and that did not work. Reset the router to factory settings and that did not work either. Router had worked until the ISP changed the ONT. The router worked initally after the ONT was changed, but that changed sometime during the day as it did not work that night. The ISP gave me a netgear router and that works, so I can connect, but I would rather the RVS4000 would work. I assume a setting at the ISP, but do not know which one. I get an error on the computer "name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded" I can ping, tracert and my little weather gadget works, but a web page will not display
View 7 Replies View RelatedManually Setup DNS IP On Every Device?
Apr 12, 2011I've got the following problem using my DLink DSL-2740B with the latest firmware:On all my devices (Notebook, Netbook, iPhone, Set top Box, TV...) I need to manually set the IP of my internet providers DNS server or else, URL's can't be resolved. I'm pretty sure that the Router/Gateway is set up correctly as the status page of the router does show both the primary and secondary DNS servers IP addresses. Both have been automatically detected by the router.On my different devices, if I leave the DNS IP to be automatically detected, they will use the Routers IP as their DNS server IP (e.g. 192.168.1.1), which is the way it should be I'd think. However, trying to access (in browser or through ping or whatever) any URL, it just won't work. I need to manually enter the DNS's IP in the device.
View 1 Replies View RelatedCan't Setup IP Address Manually
Mar 1, 2013After cleaning the PC from malware part of the settings in "Network connections" does not work. In auto mode everything is OK IP address is set and internet connection runs fine. When I tried to set it up manually - "right click" or "double click" on the connection, the PC stucks without message until "Ctr-Alt-Del". I know that reinstalling Windows will work, but I'm looking for easier way.
View 1 Replies View RelatedD-Link DIR-655 - Disconnecting A Wi-Fi Client Manually?
Aug 30, 2012Is it possible to de-auth a client, and then make sure they have to enter the passphrase if they want to connect again?
I just cant seem to find this option anywhere in my routers configuration page.
What Are The Configurations Of A UTP Cable
Mar 2, 2011how to connect UTP cable
View 1 Replies View RelatedAcer Aspire Only Connects To Network Manually
Feb 20, 2011I have a acer aspire 5741 with win7 and i5. i have no problems once i am connected to my network, the problem is the acer will only connect when i do it manually.i have changed the adapter settings to connect automatically numerous times but when i reboot, the settings always change back to connect manually. i have tried other networks but the acer will only connect manually. like i said, once connected it works fine it just will not do it automatically.
View 13 Replies View RelatedEthernet Port Red Light After Manually Reloaded XP?
Jun 29, 2011I had a malware attack and decided to reload my XP Media Edition on my Dell XPS 400 series. After the disc reformat and reload of XP from the operating system CD, and then loading the drivers CD, I cannot connect to the internet. The plug for the ethernet cable is red/yellow on two different jacks in the house. The modem is supplied by ATT U-verse. The TCP/IP is connected at 400 Mb/s but showing "0" data transfer in or out. The internet connection was working before the XP reload. I did not backup an "image" and so I may have lost my registries? Is there a way to "turn on" the ethernet port?
View 5 Replies View RelatedManually Disconnected Wireless Adapter - How To Reconnect
Dec 23, 2011I accidently disconnected my wireless adapter, how do i reconnect.
View 1 Replies View RelatedLinksys Cable / DSL :: Set Time Manually On WAG320N?
Sep 10, 2010How do I set the time on my WAG320N manually. I have set the time zone, but the time shown is 04-01-2000 15:33:52, and I can't find anywhere to correct this.
View 8 Replies View Related