Can't Ping Between Routers (Packet Tracer)
Mar 6, 2011
I'm trying to set up a network comprised of three LANs connected by serial. As this is a small part of an assignment I've been instructed to subnet into /26 and to use /30 subnets for my serial connections.At the moment I can ping between devices on each of the LANs but I can't ping between routers at all. Embarrassingly I'm not sure why, I think it may be something I've missed on setting up the serial links as I have set routers up fine before using other connection types.
View 12 Replies
ADVERTISEMENT
Sep 22, 2012
Router connects to ISP but cannot browse the Internet. I have updated the firmware to 2.0.3.2 and that did not work. Reset the router to factory settings and that did not work either. Router had worked until the ISP changed the ONT. The router worked initally after the ONT was changed, but that changed sometime during the day as it did not work that night. The ISP gave me a netgear router and that works, so I can connect, but I would rather the RVS4000 would work. I assume a setting at the ISP, but do not know which one. I get an error on the computer "name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded" I can ping, tracert and my little weather gadget works, but a web page will not display
View 7 Replies
View Related
Apr 19, 2011
i'm on the CCNA 4 accessing the WAN part for the Cisco Academy. I'm trying to do a packet tracer 8.6.1 and I'm stuck. I'm looking for the answer so I can figure out what I'm missing.
View 1 Replies
View Related
May 16, 2011
How can I pair a html file to a domain name in packet tracer?
View 2 Replies
View Related
Sep 9, 2012
having some issues. My basic VOIP network I can get to work no problem uner Vlan 1. But when I try tomake multiple basic networks to connect and put them in to diffrent Vlans such as Vlan 2, 3, 4 and conect them the phones now say configuering IP.
View 1 Replies
View Related
Oct 25, 2011
how to unlock the config tab in packet tracer?
View 1 Replies
View Related
Jan 29, 2013
I'd like to know if packet tracer 6 can be download yet?
View 5 Replies
View Related
Oct 27, 2012
I'm preparing myself for CCNA exam and i started doing a lot of different examples. I've got problem with Packet Tracer when i'm trying to apply some security settings for the range of switch ports in default VLAN 1. I might just demonstrate my commands so it will be easier do understand.
View 2 Replies
View Related
Dec 5, 2012
I am trying to test PIM SM mode between some 2811 routers built up in my packet tracer 5.3.3 .But surprisingly PIM option is not coming in the interface mode .Even IP multicast option is not shown in global config mode.
View 6 Replies
View Related
May 27, 2012
I have been playing around with Packet Tracer trying to understand EIGRP and to put it into practice. Well im not doing so well, I cant get the routers to form an adjacency therefore nothing is pinging outside of the routers. [URL]
View 4 Replies
View Related
Jan 21, 2013
I'm an IT student and I've been assigned with homework simulating a network including an ISA server and some clients in Packet Tracer but I can't find anything which can be configured like an ISA (Internet Security and Acceleration) server(this is kind of Microsoft's technology as I know) in Packet Tracer, the generic Server from the devices box has only some basic services such as HTTP, DHCP, DNS, FTP, AAA, ... but none of anything related to ISA, all the servers in Packet Tracer have only 1 interface whereas the ISA server (as far as I know) should have at least two interfaces, and there is also no CLI supported for those servers so I think I can't simulate ISA server in Packet Tracer, can I?
View 4 Replies
View Related
Jan 16, 2011
have 2 routers connected in cluster ith serial dte link. screenis locked. I need to draw a topology of Internet cluster, but i don't know how to discover whats is in it, because i don't have set ip
View 2 Replies
View Related
Apr 5, 2013
I have a project about ISP in packet tracer,I want to know how to make firewall configuration and steps I don't know how to use firewall in packet tracer at all.
View 1 Replies
View Related
Oct 12, 2012
using packet tracer, how can i find dns server ip address and i am having trouble pinging the desktops and server that i manually assigned the ip addresses to
View 2 Replies
View Related
Mar 18, 2013
I'm trying to create a silent, scripted install of Cisco Packet Tracer 5.33. At the end of the install there is a box that comes up about Packet Tracer Skills Based Assessment (PTSBA). Is there a way to supress this dialogue box? I'm using "PacketTracer533_setup.exe" /sp- /verysilent /norestart" with no luck.
View 2 Replies
View Related
Sep 29, 2011
I am using packet tracer 5.3 version and I am trying to configure IGRP on it but it doesn't show me igrp under routing protocol selection.Router number is 2621XM.IOS version is 12.2.learn the configuration of IGRP.
View 2 Replies
View Related
Mar 22, 2013
I'm student from IT school and i have a school project but i have a problem on packet tracer.In a vlan, i must block the communication between computers in it but i dont know how i must do that.Effectively, it's about 250 computers in this VLAN but each computer can't caommunicate between us.
View 4 Replies
View Related
Oct 20, 2011
Asking about Packet Tracer. I currently use packet tracer 5.3.2.Can you give me any link where to download router template on packet tracer? I want to explore cisco 2821 but packet tracer 5.3.2 has an existing of cisco 2811 only then, I tried to add the 4 ports of RJ11 but I cannot see the 4 port telphone.
View 4 Replies
View Related
May 30, 2012
I am unable to get traffic from any VLAN to communicate outside of the router, as well as get any traffic from outside of the router to communicate with any device on either VLAN. I am able to ping the router from each device on each VLAN, and vice versa. However, the traffic seems to die at the router, and I cannot figure out why. I know it's probably a small, easy fix, but I cannot seem to find any kind of documentation on it.
View 13 Replies
View Related
Mar 16, 2013
I am trying to troubleshoot a problem where in one of my remote site is not able to access some networks at HQ over Site to SIte VPN ( asa 5505 at Remote and 5520 at HQ). I ran packet tracer and HQ ASA looks clean as everything came out as ALLOW. Remote site ASA packet tracer give me DROP out at Phase 9 (VPN). I am not very sure what to look in ASA for resolution now. Is it an access list that is blocking the traffice or VPN setup.
View 5 Replies
View Related
Nov 22, 2011
I've been using packet-tracer for some time on and off with mixed results.
I'm running a multi context firewall with over 10 of the contexts sharing the same outside interface / network. All interfaces obviously have valid, unique IPs and also unique MAC addresses as mac-address auto is enabled in the system context.
This is an ASA 5550 running 8.3(2.10) interim so includes the fix for the well known packet-tracer classication failed bug.
So in theory, with firewall contexts on a shared interface the ASA should use the firewall MAC address to classify incoming traffic to the correct firewall and as far as I am aware, only fall back on using NAT to classify if the interface MACs are the same. In reality on my platform this doesn't seem to be happening and the classifier is using NAT to determine the destination context. I'm seeing this with live traffic (i.e. not generated by packet-tracer) in logs and can prove it by disabling certain NAT rules (there is some overlap with the IP addressing behind each firewall).
My question regarding packet tracer is this - in the above scenario with a shared outside interface, does packet tracer ALWAYS use NAT to determine the destination context? Or does packet tracer look up the MAC address of the ingress interface according to what context you are running packet tracer from? It appears that packet-tracer is using NAT in my case which could be just symptomatic of the potential bug I've described above rather than by design.
View 2 Replies
View Related
Sep 16, 2012
here, am used to the RouterSwitch CLI but been asked to set up an ASA 5505 8.4.Quite simply I am trying to at least test out a static PAT from an external source to an internal server in a test environment and no matter whether I set it up as an auto-nat or a twice-nat whenever I run a packet tracer I end up with the same error. This is the packet-tracer I am running-packet-trace input outside tcp 80.80.80.80 3389 10.240.0.10 3389
Phase: 5
Type: NAT
Subtype: rpf-check
Result: DROP
Config:nat (inside,outside) source static server publicIP service RDP RDP
Additional Information:
[code]....
Now I have a couple of questions initially. I have made the presumption that packet-tracer does not look at any external devices while running - as in as long as the ports are up it doesn't matter what is on the end of them for testing purposes? Is there anything I am missing?I have this morning wiped the config and have simply set up the adapters, a default route and twice nat and am not sure why I keep getting the error. I am sure it is something very simple and I'm being a massive donut!
[code]...
View 3 Replies
View Related
May 23, 2012
i have made a topology in packet tracer related to etherchannel configuration.i am using 2 3560 switches and 1 2950 switch. Now what i want is to bundle up the redundant links between these 3 switches. The links fa0/1-3 between 2950_1 and 3560_1 switches have been bundled up but when i try to bundle the links fa0/4-6 of 3560_1 to fa0/4-6 of 3560_2 it wont work. i am using channel-group 1 mode desirable between the 3560 switches. secondly if i want to assign ip to port channels then it has to be of same subnet between 2 3560 switches right and it must be same between 2950_1 and 3560_1. But these 2 subnets should be different from one another.
View 3 Replies
View Related
Oct 9, 2012
I am using Packet Tracer to simulate Cisco networking.As the existing IOS of the 3560 and 2960 switch are in older version which has no new feature in new IOS, how to upgarde the IOS of Cisco switch at Packet Tracer?
View 5 Replies
View Related
Dec 19, 2011
I'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies
View Related
Nov 17, 2012
Pinging 98.137.149.56 and had 100% packet loss; this was suggested in another thread. LAN connected at 100 Mbps BUT cannot access Internet! Windows XP HP desktop; Belkin N Router; Optimum Cablevision - Modem Scientic Atlanta "Webstar"
I am using my iPhone to access Internet.
View 10 Replies
View Related
Feb 12, 2013
When I ping my video streaming host's IP address (the IP that they gave me where I can view my IP web camera's video stream), I get anywhere from 0% to 8% packet loss at various times of the day. They're claiming that there's no problem, that this is because this is a router and it's dropping ping packets due to "ping priority giving preference to more important network traffic."
View 7 Replies
View Related
Nov 3, 2012
I recently moved from an old apartment in Downtown Montreal, to a suburb area, but still close to where I was before (10 km). I am using the same ISP provider, Videotron. The same speed. I was playing games perfectly fine before, but now something is really wrong. Whenever I join a server, my ping skyrockets up to close to 200, sometimes drifting to 130 but never going below... and often rising back up again.Keep in mind that I filter servers by their pings. I only join servers that display a low ping (although often I won't see any, when I refresh.. there they are). I'll see a server with 30 ping, join it, and be at 200. I'm mainly trying to play Chivalry Medieval Warfare.It's entirely unplayable. Not only is it impossible to properly time parries anymore, but I also get a lot of rubberbanding. I've tested the internet here, and the speeds are accurate. 10 mbps down, 1 mbps up. I am connected to a Linksys E1200 router. I've tried everything I can possibly think of.I went into the router setup, disabled the firewall, added myself to a DMZ, tried to forward every port for steam (although it didn't seem to recognize it as a program)... rebooted the modem, my computer, the router, tried a different Ethernet cable.. nothing is working. It's very depressing. Nothing has changed on my own computer in the move.
View 13 Replies
View Related
Nov 21, 2011
I am pinging a host from Nexus 7K. I'm losing every 200th packet when I'm pinging the end host. I don't see any issue with network connection.
View 2 Replies
View Related
Nov 2, 2011
In my network i have Cisco nexus 4 switches those are running as redundancy and fault tolerance. I have mulitple VRF instances are running, when i tried to ping the gateway IP (hsrp Virtual IP) witch same VRF instance it is getting packet loss.
View 3 Replies
View Related
Jan 24, 2013
about 4 weeks ago we started experiencing Packet Loss and High Pings while playing games. This affects our 2 PC's and our PlayStation 3 (Since we use them for gaming). We have contacted our ISP several times regarding the issue but each representative we have talked to has had different ideas of what the problem is. They replaced the modem twice which did nothing, so I then purchased 2 new Router's (DIR 601 N150 & DIR 835 N750+). Neither of them solved the issue. my ISP also says it isn't the Internet Cable that is causing the issue. My Download Speeds and Upload Speeds are right where they should be but the ping and the packet loss is the problem. I also contacted DLINK (Router Manufacturer) to see if they had and all we did was upgrade the firmware version and change the Wireless channels which also did nothing. I have plugged this PC into the modem with an Ethernet Cord and played games and all the issues were gone which leads me to believe that Modem and the ISP aren't the issue.
Things I've Tried:
-Resetting the Modem
-Testing each Wireless Channel on my Router
-Enabling and Disabling 802.11n and 802.11g on the router
-Changing the QoS settings
-Installing Software such as Gamebooster and Advanced System Care
-Disabling all Antivirus programs and Firewalls on the PC's
-Using a friends Modem instead of the Cogeco one
[code]...
OS: Windows 7 Home Premium 64-Bit
System Manufacturer: Acer
System Model" Aspire M5802
Processor: Intel Core 2 Quad CPU
RAM: 8GB
Graphics Card: AMD Radeon HD 7800 Series (7850 to be exact)
View 3 Replies
View Related
Feb 22, 2011
I have an existing site-2-site VPN between a Cisco 2621 router (IOS 12.3) and Cisco 1841 (IOS 12.3) and I can ping packet size of 17000 over the IPSec tunnel without any issue:c2621#ping 192.168.230.254 source f0/1 repeat 20 size 17000,Type escape sequence to abort.Sending 20, 17000-byte ICMP Echos to 192.168.230.254, timeout is 2 seconds:Packet sent with a source address of 192.168.208.254!!!!!!!!!!!!!!!!!!!!Success rate is 100 percent (20/20), round-trip min/avg/max = 144/146/148 msc2621#I replaced the Cisco 2621 with a more powerful ASR 1002 running IOS version asr1000rp1-adventerprisek9.03.01.00.S.150-1.S.bin. However, I can not ping packet size larger than 9200 over the IPSec tunnel:Feb 24 02:42:52.362: %IOSXE-3-PLATFORM: F0: cpp_cp: QFP:00 Thread:015 TS:00000015834854465792 %IPSEC-3-PKT_TOO_BIG: IPSec Packet size 10072 larger than maximum supported size 9216 hence dropping it.Success rate is 0 percent (0/10)asr1002# Why is not working? Basically the more expensive ASR router can not perform the same task as the old Cisco 2621 router.
View 6 Replies
View Related
Feb 24, 2007
Can your wireless router do a ping test to 66.161.11.90 [URL] or any other [URL] for that matter?Mine can't, either with my wireless PB G4 running OS X 10.4 or wired Dell running Windows XP. I tried it with a wrt54g v5 & wrt54g v6 both tests got a 'request timed out' with 100% packet loss. v5 had the latest firmware, v6 is still at 1.00.9
View 3 Replies
View Related
