How To Setup DNS In Packet Tracer
May 16, 2011How can I pair a html file to a domain name in packet tracer?
View 2 Replies
ADVERTISEMENT
How To Find Packet Tracer 8.6.1
Apr 19, 2011i'm on the CCNA 4 accessing the WAN part for the Cisco Academy. I'm trying to do a packet tracer 8.6.1 and I'm stuck. I'm looking for the answer so I can figure out what I'm missing.
View 1 Replies View RelatedCisco Packet Tracer VOIP
Sep 9, 2012having some issues. My basic VOIP network I can get to work no problem uner Vlan 1. But when I try tomake multiple basic networks to connect and put them in to diffrent Vlans such as Vlan 2, 3, 4 and conect them the phones now say configuering IP.
View 1 Replies View RelatedCan't Ping Between Routers (Packet Tracer)
Mar 6, 2011I'm trying to set up a network comprised of three LANs connected by serial. As this is a small part of an assignment I've been instructed to subnet into /26 and to use /30 subnets for my serial connections.At the moment I can ping between devices on each of the LANs but I can't ping between routers at all. Embarrassingly I'm not sure why, I think it may be something I've missed on setting up the serial links as I have set routers up fine before using other connection types.
View 12 Replies View RelatedHow To Unlock The Configuration Tab Packet Tracer
Oct 25, 2011how to unlock the config tab in packet tracer?
View 1 Replies View RelatedCisco :: Packet Tracer 6 Download?
Jan 29, 2013I'd like to know if packet tracer 6 can be download yet?
View 5 Replies View RelatedCisco :: Range Of Ports In Packet Tracer
Oct 27, 2012I'm preparing myself for CCNA exam and i started doing a lot of different examples. I've got problem with Packet Tracer when i'm trying to apply some security settings for the range of switch ports in default VLAN 1. I might just demonstrate my commands so it will be easier do understand.
View 2 Replies View RelatedCisco :: Enabling PIM In Packet Tracer 5.3.3.0019?
Dec 5, 2012I am trying to test PIM SM mode between some 2811 routers built up in my packet tracer 5.3.3 .But surprisingly PIM option is not coming in the interface mode .Even IP multicast option is not shown in global config mode.
View 6 Replies View RelatedCisco :: Configuring EIGRP On Packet Tracer?
May 27, 2012I have been playing around with Packet Tracer trying to understand EIGRP and to put it into practice. Well im not doing so well, I cant get the routers to form an adjacency therefore nothing is pinging outside of the routers. [URL]
View 4 Replies View RelatedCisco :: Simulate An ISA Server In Packet Tracer?
Jan 21, 2013I'm an IT student and I've been assigned with homework simulating a network including an ISA server and some clients in Packet Tracer but I can't find anything which can be configured like an ISA (Internet Security and Acceleration) server(this is kind of Microsoft's technology as I know) in Packet Tracer, the generic Server from the devices box has only some basic services such as HTTP, DHCP, DNS, FTP, AAA, ... but none of anything related to ISA, all the servers in Packet Tracer have only 1 interface whereas the ISA server (as far as I know) should have at least two interfaces, and there is also no CLI supported for those servers so I think I can't simulate ISA server in Packet Tracer, can I?
View 4 Replies View RelatedProtocols / Routing :: Cluster In Packet Tracer?
Jan 16, 2011have 2 routers connected in cluster ith serial dte link. screenis locked. I need to draw a topology of Internet cluster, but i don't know how to discover whats is in it, because i don't have set ip
View 2 Replies View RelatedProtocols / Routing :: How To Use Firewall In Packet Tracer
Apr 5, 2013I have a project about ISP in packet tracer,I want to know how to make firewall configuration and steps I don't know how to use firewall in packet tracer at all.
View 1 Replies View RelatedManually Assigned Ip Configurations Using Packet Tracer?
Oct 12, 2012using packet tracer, how can i find dns server ip address and i am having trouble pinging the desktops and server that i manually assigned the ip addresses to
View 2 Replies View RelatedCisco WAN :: Packet Tracer 5.33 Silent Install?
Mar 18, 2013I'm trying to create a silent, scripted install of Cisco Packet Tracer 5.33. At the end of the install there is a box that comes up about Packet Tracer Skills Based Assessment (PTSBA). Is there a way to supress this dialogue box? I'm using "PacketTracer533_setup.exe" /sp- /verysilent /norestart" with no luck.
View 2 Replies View Related2621XM Packet Tracer IGRP Configuration
Sep 29, 2011I am using packet tracer 5.3 version and I am trying to configure IGRP on it but it doesn't show me igrp under routing protocol selection.Router number is 2621XM.IOS version is 12.2.learn the configuration of IGRP.
View 2 Replies View RelatedCisco :: Packet Tracer - Must Block Communication Between Computers
Mar 22, 2013I'm student from IT school and i have a school project but i have a problem on packet tracer.In a vlan, i must block the communication between computers in it but i dont know how i must do that.Effectively, it's about 250 computers in this VLAN but each computer can't caommunicate between us.
View 4 Replies View RelatedCisco :: Where To Download Router Template On Packet Tracer
Oct 20, 2011Asking about Packet Tracer. I currently use packet tracer 5.3.2.Can you give me any link where to download router template on packet tracer? I want to explore cisco 2821 but packet tracer 5.3.2 has an existing of cisco 2811 only then, I tried to add the 4 ports of RJ11 but I cannot see the 4 port telphone.
View 4 Replies View RelatedCisco :: VLANs Route Outside Of Network Packet Tracer
May 30, 2012I am unable to get traffic from any VLAN to communicate outside of the router, as well as get any traffic from outside of the router to communicate with any device on either VLAN. I am able to ping the router from each device on each VLAN, and vice versa. However, the traffic seems to die at the router, and I cannot figure out why. I know it's probably a small, easy fix, but I cannot seem to find any kind of documentation on it.
View 13 Replies View RelatedCisco Firewall :: ASA5505 - Packet Tracer Output - Access Denied
Mar 16, 2013I am trying to troubleshoot a problem where in one of my remote site is not able to access some networks at HQ over Site to SIte VPN ( asa 5505 at Remote and 5520 at HQ). I ran packet tracer and HQ ASA looks clean as everything came out as ALLOW. Remote site ASA packet tracer give me DROP out at Phase 9 (VPN). I am not very sure what to look in ASA for resolution now. Is it an access list that is blocking the traffice or VPN setup.
View 5 Replies View RelatedCisco Firewall :: 5550 ASA (8.3) - Packet Tracer / Multi-Context Classification
Nov 22, 2011I've been using packet-tracer for some time on and off with mixed results.
I'm running a multi context firewall with over 10 of the contexts sharing the same outside interface / network. All interfaces obviously have valid, unique IPs and also unique MAC addresses as mac-address auto is enabled in the system context.
This is an ASA 5550 running 8.3(2.10) interim so includes the fix for the well known packet-tracer classication failed bug.
So in theory, with firewall contexts on a shared interface the ASA should use the firewall MAC address to classify incoming traffic to the correct firewall and as far as I am aware, only fall back on using NAT to classify if the interface MACs are the same. In reality on my platform this doesn't seem to be happening and the classifier is using NAT to determine the destination context. I'm seeing this with live traffic (i.e. not generated by packet-tracer) in logs and can prove it by disabling certain NAT rules (there is some overlap with the IP addressing behind each firewall).
My question regarding packet tracer is this - in the above scenario with a shared outside interface, does packet tracer ALWAYS use NAT to determine the destination context? Or does packet tracer look up the MAC address of the ingress interface according to what context you are running packet tracer from? It appears that packet-tracer is using NAT in my case which could be just symptomatic of the potential bug I've described above rather than by design.
Cisco ASA 5505 Simple PAT - Packet-tracer Can't Look At Any External Devices While Running
Sep 16, 2012here, am used to the RouterSwitch CLI but been asked to set up an ASA 5505 8.4.Quite simply I am trying to at least test out a static PAT from an external source to an internal server in a test environment and no matter whether I set it up as an auto-nat or a twice-nat whenever I run a packet tracer I end up with the same error. This is the packet-tracer I am running-packet-trace input outside tcp 80.80.80.80 3389 10.240.0.10 3389
Phase: 5
Type: NAT
Subtype: rpf-check
Result: DROP
Config:nat (inside,outside) source static server publicIP service RDP RDP
Additional Information:
[code]....
Now I have a couple of questions initially. I have made the presumption that packet-tracer does not look at any external devices while running - as in as long as the ports are up it doesn't matter what is on the end of them for testing purposes? Is there anything I am missing?I have this morning wiped the config and have simply set up the adapters, a default route and twice nat and am not sure why I keep getting the error. I am sure it is something very simple and I'm being a massive donut!
[code]...
Cisco Switching/Routing :: 3560 Topology In Packet Tracer Related To Etherchannel Configuration
May 23, 2012i have made a topology in packet tracer related to etherchannel configuration.i am using 2 3560 switches and 1 2950 switch. Now what i want is to bundle up the redundant links between these 3 switches. The links fa0/1-3 between 2950_1 and 3560_1 switches have been bundled up but when i try to bundle the links fa0/4-6 of 3560_1 to fa0/4-6 of 3560_2 it wont work. i am using channel-group 1 mode desirable between the 3560 switches. secondly if i want to assign ip to port channels then it has to be of same subnet between 2 3560 switches right and it must be same between 2950_1 and 3560_1. But these 2 subnets should be different from one another.
View 3 Replies View RelatedCisco Switching/Routing :: 3560 And 2960 - Update Switch IOS Version At Packet Tracer 5.3
Oct 9, 2012I am using Packet Tracer to simulate Cisco networking.As the existing IOS of the 3560 and 2960 switch are in older version which has no new feature in new IOS, how to upgarde the IOS of Cisco switch at Packet Tracer?
View 5 Replies View RelatedCisco Security :: Finding Security Labs For GNS3 Or Packet Tracer?
Dec 19, 2011I'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies View RelatedCisco Routers :: RVS4000 Connects To ISP Can Ping And Tracer But Cannot Browse
Sep 22, 2012Router connects to ISP but cannot browse the Internet. I have updated the firmware to 2.0.3.2 and that did not work. Reset the router to factory settings and that did not work either. Router had worked until the ISP changed the ONT. The router worked initally after the ONT was changed, but that changed sometime during the day as it did not work that night. The ISP gave me a netgear router and that works, so I can connect, but I would rather the RVS4000 would work. I assume a setting at the ISP, but do not know which one. I get an error on the computer "name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded" I can ping, tracert and my little weather gadget works, but a web page will not display
View 7 Replies View RelatedCisco Routers :: QuickVPN Setup On RV120W Without Changing Internal Setup
Nov 8, 2011Is there a way to set up Quick VPN on the RV120W without changing the internal subnet? I have just taken over responsibility for a network and I don't know all of the nooks and crannies yet, so I'd rather not change the internal sub net. I've tried setting up a user then changing the LAN settings afterward, but it automatically removed the VPN user when I did so.
View 1 Replies View RelatedCisco Routers :: SRP527W - Setup - Cannot Find Web Console To Setup
Jan 1, 2012I've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.
View 5 Replies View RelatedTCP First Packet Loss?
Dec 12, 2012i am implementing tcp as per rfc 793, i have one doubt, while sending first packet, if that packet lost means, tcp will wait for RTO and retransmit the first packet, and after got the ack for first packet, then only it will send second packet or without getting the ack for the first packet it will send second packet.
View 7 Replies View RelatedUDP Packet Conflict
Jul 28, 2011In application udp port listening with 3330 i am sending udp request from port 0.0.0.0:3330 to 0.0.0.0:3330 that is same port in the same machine, application works fine with udp sending and receiving also fine, for clarification. s there any conflicts in the communication ?
View 5 Replies View RelatedHow To Do Packet Tracking
Sep 26, 2012I am trying to collect and track packets from other computers on my network and have them sent to my computer so i can sniff through them. I have been tacked with trying to reduce the amount packet broadcasts going through the network. I have been playing with Wireshark for a little bit only analyzing my packets but now I want to try collecting a couple of computers on my network. I know there is a little service that I can run with WinPcap but I am pretty sure there is a way to do it through the settings on my switches but i'm not sure what setting I need to use. I have 4 switches 2x Netgear GS724TS 2x Netgear GS724TR. I'm not sure what feature needs to be used to do what I want. All the switches can do SNMP and LLDP and I think it is one of these I need to use but not sure switch one to use.
View 1 Replies View RelatedWhat Is The Packet Length Of H.264
Apr 17, 2012I was calculating packet amount of MPEG I use byte rate to divide by 188 byte but now i want to calculate H.264 encode video what is the packet length of h.264? is it same 188byte?
View 1 Replies View RelatedPacket Capture In FWSM?
Oct 1, 2012when performing packet capture in a FWSM
[code]...
Way To Move Packet From One Machine To Another
Feb 23, 2011If i want to send a packet from one host to another host through a router, how will the packet be sent? I mean what are the stages that a packet can reach to the destination.
View 6 Replies View Related