Cisco Wireless :: 1200 - Configure Wep With Mac Address Authentication
Jan 20, 2012I have cisco aironet 1200 series Acess point i want to configure wep with mac authentcation .
If any document with GUI configuration
ADVERTISEMENT
Cisco Wireless :: AP 1200 Disable MAC Authentication
Apr 4, 2013I want to disable the MAC authentication that is configured in my Aironet 1200 Cisco Access Point, now set to "Local list only". I want that any wireless device can connect if the user knows the wep password.
I cannot find the option to disable the MAC authentication.
Cisco :: Wireless Authentication Without Encryption Aironet 1200
Aug 14, 2011Is there a way to configure client/user to AP authentication without using encryption for joining to an wireless network? What we need to do here is protect network access at our hotspots by enforcing a password to get connected. The other part is making it compatible with every possible device so we need to have encryption off. We have a mixed environment at this time until everything is upgraded. Aironet 1200 series and some new Aironet 1142 models. No controller, all standand alone AP's
View 2 Replies View RelatedCisco Wireless :: How To Set Up User Authentication On Aironet 1200
Jan 22, 2013I would like to be able to have a few "guest" users on the Wireless network for visitors. Is there any method to have a prompt for "Username / password"? I would like the user accounts to have different expiry periods if this is possible. My current config is attached. The SSID "test" appears on the network. The SSID "test111" does not appear.
View 1 Replies View RelatedCisco Wireless :: Possible With 802.1X Authentication To Setup Access To 1200 AP
Mar 13, 2011Is it possible to setup a Cisco 1200 AP with 802.1x to drop users into the corprate network if they have a certificate or if not to put them on the guest network?
View 3 Replies View RelatedCisco Wireless :: Change IP Address Of Aironet 1200 Series Access Point
Dec 30, 2012we have 6 access points in production and we want to chnage the IP addresses of them. So what would be the procedure for that.
View 17 Replies View RelatedCisco Wireless :: 5508 / How To Configure Web Authentication
Jun 9, 2012Can we configure the wireless controller 5508 to authenticate the clients using both of MAC address Filtering (layer 2 security) and Web authentication (layer 3 security). and what is the difference between (Web policy --> authentication) and (Web policy --> on MAC filter failure)
View 6 Replies View RelatedCisco Wireless :: How To Configure WLC 2500 With Authentication 802.1x EAP TTLS
Mar 14, 2013My client wants to test their new product with wireless authentication 802.1x EAP TTLS. They have CISCO WLC 2504. Does CISCO WLC 2500 support EAP TTLS, if yes then how to configure. So far I have added Radius TTLS server into my WLC. Under Radius on WLC added radius server IP and key and created new SSID 802.1x WPA+WPA2 ( WPA policy2 and WPA encryption AES) after that under SSID AAAservers selected drop down same server IP. But user tried and didn’t work also we didn’t see any hit on radius server. Yea policy has added on radius. My client wants to use TTLS instead of TLS because in TLS you have to use client certificate on client side but on TTLS you can use certificate on client side but it is optional. So they want to stick with TTLS. But I am not seeing any documentation on TTLS with cisco WLC
View 8 Replies View RelatedCisco Wireless :: Configure WLC 2500 With Authentication 802.1x EAP TTLS
Mar 14, 2013My client wants to test their new product with wireless authentication 802.1x EAP TTLS. They have CISCO WLC 2504. Will CISCO WLC 2500 support EAP TTLS, if yes then how to configure.
So far I have added Radius TTLS server into my WLC. Under Radius on WLC added radius server IP and key and created new SSID 802.1x WPA+WPA2 ( WPA policy2 and WPA encryption AES) after that under SSID AAAservers selected drop down same server IP.But user tried and didn’t work also we didn’t see any hit on radius server. Yea policy has added on radius.
My client wants to use TTLS instead of TLS because in TLS you have to use client certificate on client side but on TTLS you can use certificate on client side but it is optional. So they want to stick with TTLS. But I am not seeing any documentation on TTLS with cisco WLC?My android phone galaxy II has TTLS option under EAP 802.1x, so android devices support TTLS.
Cisco Wireless :: W2k3 Using Mac Address For Authentication
Sep 9, 2012How do we configure our controllers/radius-servers to use MAC-addresses instead of authenticate against a certain group in the AD? We would, if possible, like to combine these two ways of authentication in on SSID.We're running 7.0.116.0 on our controllers (5500-series) and our radius-servers are one W2k8 and one W2k3.
View 10 Replies View RelatedCisco Wireless :: 2504 -configure MAC Authentication With Certificate Based
Jan 8, 2013I have cisco 2504 WLAN controller with 7.4 IOS. My query is can I configure the MAC authentication with certificate based. And without using any external servers like Radius, ACS and LDAP.
May I know, If there is a option on WLC…
Cisco Wireless :: How To Configure ACS5.2 For TACACS Management Authentication Of WCS
Sep 12, 2011Is there a decent guide on how to configure ACS5.2 for TACACS management authentication of WCS?
View 2 Replies View RelatedCisco :: To Configure WLC 2500 With Authentication 802.1x EAP TTLS
Mar 14, 2013My client wants to test their new product with wireless authentication 802.1x EAP TTLS. They have CISCO WLC 2504. If CISCO WLC 2500 support EAP TTLS, if yes then how to configure.So far I have added Radius TTLS server into my WLC. Under Radius on WLC added radius server IP and key and created new SSID 802.1x WPA+WPA2 ( WPA policy2 and WPA encryption AES) after that under SSID AAAservers selected drop down same server IP.But user tried and didn’t work also we didn’t see any hit on radius server. Yea policy has added on radius.My client wants to use TTLS instead of TLS because in TLS you have to use client certificate on client side but on TTLS you can use certificate on client side but it is optional. So they want to stick with TTLS. But I am not seeing any documentation on TTLS with cisco WLCMy android phone galaxy II has TTLS option under EAP 802.1x, so android devices support TTLS.
View 2 Replies View RelatedCisco :: Configure ACS 4.2 To Only Allow Certain EAP-type Of Authentication Per SSID?
Mar 13, 2012Is there away to configure ACS 4.2 to only allow certain EAP-type of authentication per SSID? For example: SSIDA - only allows EAP-TLS and SSIDB - only allows EAP-PEAP on the same ACS server?
View 1 Replies View RelatedCisco Wireless :: WAP321 Configure IP Address On Management VLAN
Feb 26, 2013I have a WAP321 I am trying to set up. It's connected to gi1/23 and the switch system mode is set to router. The rest of the network works just fine.I have an SG500-28p and the port. [code] On the WAP321 wizard, configured IP address on my management vlan and also configured the default SSID on that vlan. That works. (I plan to remove that one) Then I add the two SSIDs for vlan 20 and 22 (private and public access) and I can't associate to either of the two additional SSIDs. I haven't configured any other settings beyond the wizard and adding the other two SSIDs. I do want cisco mobile ios (jabber) to work on the private network and also do have a couple spa525g2s that need to connect wireless.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: How To Configure User Authentication Via TACACS On UCS 1.4 With ACS 5.2
Aug 18, 2011how do i configure user authentication via TACACS on UCS 1.4 with ACS 5.2? My TACACs connection works, and my user authentication is successful, but i can only get read-only rights. I have tried several versions of "cisco-av-pair= role=admin" both as mandatory attributes named role and as cisco-av-pair=role , with "admin" as the value, and i still get read-only.
When i attempt to find any documentation, it only describes ACS 4.2, which is another problem i have with most documentation for new cisco products (i have this exact issue with my NAMs, nothing i do to change the attributes results in successfully logging into the NAM, and all config guides are written in 4.2 speak).
is there any possiblity cisco is going to release some documentation on how to convert 4.2 speak to 5.2 speak?
Cisco :: ACS 5.2 / Configure Management-access Authentication To WCS Via Tacacs+?
Jul 12, 2012I want to configure managment-access authentication to the WCS via tacacs+. The AAA Server is Cisco ACS 5.2.I made it and it works, but only with PAP Authentication Type. Chap doesn't work 4 me.The Access Service is configured with allowed protocols PAP and CHAP.The ACS Monitor just display an error with these steps:Received TACACS+ Authentication START Request
View 1 Replies View RelatedCisco Wireless :: Aironet 600 OEAP / AP Is Able To Configure 2 Public IP Address Of DMZ-WLCs?
Dec 9, 2012Does the AP is able to configure 2 public ip address of the DMZ-WLCs?
like ip 1.1.1.1 in my US data center, whereas a second ip 2.2.2.2 in my EU data center?
Cisco :: ACS 3.3 / Configure WLAN Authentication On WCS To Prompt Users About Credentials
Aug 28, 2012I'm trying to configure WLAN authentication on my WCS to prompt users about their credentials.I'm using a Windows 2008 NPS as Radius server but I can also use a Cisco ACS 3.3 if needed.With each setup I tried, the credentials are sent automatically to the Radius server using the Windows user session credentials.How can I force the WCS to ask for a username and password before sending them to the Radius Server ?
View 4 Replies View RelatedCisco AAA/Identity/Nac :: ACS V5.2 / Can Configure User Authentication Logs To Be Viewed On WCS
Jul 18, 2011I have some queries regarding on the report generation for on Cisco ACS v5.2.
1) Can we schedule to run a customized report on ACS and then email the report to the user?
2) Can we run a users authentication trend report based on the AD directory group rather than individual user.
3) Can we configure user authentication logs to be viewed on WCS.
Cisco :: Configure WPA Or WPA2 Authentication On 1042N Access Points?
Mar 12, 2012I need to configure WPA or WPA2 authentication on cisco 1042N access points. But I believe that for this requirement I need to have either an internal or external RADIUS server, but my customer want to just a normal WPA/WPA2 authentication like what we configure on cisco WAP200 or WAP4410 accesspoints, is there any work arounds to configure WPA/WPA2 authentication in a simpler manner rather than configuring RADIUS server option?
View 2 Replies View RelatedCisco Switching/Routing :: Configure Tacacs Authentication For Http In 2960
Oct 13, 2011I am trying configure tacacs authentication for http in Cisco 2960 with IOS 15.0.1.SE. [code] But the device is not authenticating. It ask the credentials (user and pass) but not authenticates.
View 7 Replies View RelatedCisco Switching/Routing :: Configure 802.1x RADIUS Authentication On 2950-24TT-L Switch?
May 3, 2013I am trying to configure 802.1x RADIUS Authentication on cisco 2950-24TT-L Switch. I am using following set of command as given below
Switch# configure t
Switch(config)# aaa new-model
Switch(config)# aaa authentication dotx default group redius
Switch(config)# dot1x system-auth-control
Switch(config)# inter fasteth 0/1
Switch(config)#dot1x port-control atuo
I am facing problem dot1x command is not working on interface.
Cisco AAA/Identity/Nac :: 13017 Way To Configure Email Notification For Specific Authentication Failure
May 14, 2011Is there a way to configure an email notification for a specific authentication failure? Specifically, I'd like to see if I can have an email notifcation sent to me when failure reason is "13017 Received TACACS+ packet from unknown Network Device or AAA Client".
View 1 Replies View RelatedCisco Switching/Routing :: C3750 Switches MAC Address Authentication
May 9, 2013We are deploying the ISE MAC address authentication by-pass (mab) feature in our network as an alternative to port security on the switch port. Works well except for certain devices e.g. printers, snmp modules, and Unix/Linux Operating systems which can range from 5-10 minutes to never in authentication/opening the port.
View 2 Replies View RelatedCisco Wireless :: AP 1200 Goes Down Hard
May 28, 2013We have a 1200 Aironet just go down hard for no reason through out the day, we replaced the Power Injector with a C2960 POE Switch, we also replaced the cabiling. When it goes down hard all three lights are still green as if the AP is still up. We verified the IOS with other stores and everything is the same on the configurations, versions, and IOS.
View 35 Replies View RelatedCisco Wireless :: 2x 1200 AP Directly On 2106 WLC?
Jun 9, 2012I got my final assignment from school, and my teacher asked me to configure 2 Access Points (1200 series) directly on a Wireless Controler (Cisco 2106). I can't ask my teacher for any questions, cause he doesn't know how to configure it also, THAT's why he's asking me to do it.I've learned a lot of things about the default static interfaces (the "management" and "ap_manager" interface), but i can't seem to fully understand how to configure it.I want to use the Internal DHCP server of the WLC. How I can get those 2 Access Points working on the WLC. I only seem to get DHCP issues.
This is what i've done:
- Leave the configuration of the "management" and the "ap_manager" default (172.16.1.30 and 172.16.1.30). Bound to port 1
- Made a new interface "AP1" with IP-Address 10.0.0.10 (/24), default gateway 10.0.0.1. Primary DHCP server: 172.167.1.30
- Made a new interface "AP2" with IP-Address 192.168.1.10 (/24), default gateway 192.168.1.1. Primary DHCP server: 172.167.1.30
- Made 2 DHCP scopes within the 192.168.1.0 and 10.0.0.0 networks.
For some reason, when i boot up both AP's, the won't get any DHCP address.
Cisco Wireless :: AP 1200 - MAC Filter And WPA Autonomous AP
Jul 19, 2011I have two wireless networks configured in the AP1200, both SSIDs are configured with WPA.
SSID 01: configured whit WPA
SSID 02: configured whit WPA
I have configured the access-list number 700, and I would like to apply to a single network. Achieving the following:
SSID 01 : WPA + Mac Filter, using the ACL number 700.
SSID 02: WPA
How I can apply the list 700 to the first SSID only ??
Cisco Wireless :: 1200 Virtual LAN Controller
Mar 17, 2013I am looking at deploying a Cisco Virtual Wireless LAN Controller (vWLC 7.3).Do I need Prime Infrastructure to manage the environment, or can I manage my AP's (1200 series) using the vWLC alone?
View 6 Replies View RelatedCisco Wireless :: Using Both Radios On 1200 Series AP?
Jun 7, 2012I am using 5 Cisco 1200 Series APs with both an A and G radio. Is there a benefit/problem to running both simultaneously? I would have one SSID and is setup for Fast Roaming as well.
View 1 Replies View RelatedCisco Wireless :: AP 1200 Client Adapter For 802.11g
Nov 5, 2003For the past week, I've been looking to implement wireless technology at our educational site. We've conducted some tests with an AP1200 and we were satisfied with the performances of 802.11a standards.
Since one of our requirements is bandwidth, we are looking to implement a 802.11g standard for that need. Unfortunately, Cisco does not offer any client access adapter for that 11g standard as opposed of the competition. What kind of client adapter (PCMCIA) can Cisco recommend to work with AP1200 under the 802.11g ?
Cisco Wireless :: 1200 - 1.5 Mile AP To WGB Connection
Jan 23, 2012I have 2 Cisco 1200 G AP's connecting 2 different locations. Location A ( La ) I have a RVO82 router connected to a 50Mbit cable connection. I have an AP setup there using a 1 Watt booster and a 24db wire grid directional antenna. Only one antenna here, the other disabled.
At Location B (Lb ), about 1.5 miles away, with good to excellent line of site, i have the other setup as a WGB with a 15db wire grid directional antenna with a 1 Watt booster. Also only one antenna here, the other disabled.
WGB feeds a simple 8 port switch and in that switch i have a simple belkin wireless router setup as an AP for Lb's wireless access,
The signal strenght between the two locations is -49 to -52 db, depending on what time of day I check it.
I have had this setup for a couple of years now. I recently switched from a 3Mbit DSL connection to the 50Mbit cable connection hoping to increase my bandwidth with no luck.
.
When I first set this up i had a 6Mbit cable connection and it maxxed out at 5 Mbit at Lb. I thought i would be able to add more boosters and antennas as time went on to go from half duplex to full duplex (the way i think of it is one antenna receiving and the other sending, at both locations) so that when our ISP had faster rates available, i could upgrade. I recently read somewhere on the net that it is not possible to run full duplex in the AP to WGB setup i have. Is that true?
My main concern is increasing bandwidth on the WGB side Lb. When i upgraded to 50Mbit, i still only max out at 5mbit at Lb. Before i thought it was due to not being full duplex or weaker signal strengths (I've always had the 1watt booster at Lb, then i added one later to La with no benefit noticed except signal strength is better and uploads seem faster from Lb....)
Cisco AAA/Identity/Nac :: Configure IEEE 802.1x Port-based Authentication On Switches / Preferable 2960 Series
Aug 14, 2011I want to configure IEEE 802.1x port-based authentication on cisco switches, preferable 2960 series. Which models support this feature?. I have try with some older switches but it doesn't works properly on everyone. I have upgraded them whitout better results, there is namely an issue with TLS handshaking on some switches which produces authentication to fail.
View 1 Replies View Related