Cisco :: Wireless Authentication Without Encryption Aironet 1200
Aug 14, 2011
Is there a way to configure client/user to AP authentication without using encryption for joining to an wireless network? What we need to do here is protect network access at our hotspots by enforcing a password to get connected. The other part is making it compatible with every possible device so we need to have encryption off. We have a mixed environment at this time until everything is upgraded. Aironet 1200 series and some new Aironet 1142 models. No controller, all standand alone AP's
View 2 Replies
ADVERTISEMENT
Oct 1, 2011
I have a Cisco Aironet 1200 series Access point and currently i am using wep with 128 bit . My concern is that i want to change this key with current SSID .
My current SSID is ABtc. My current key is abcdefgh12345. when i try to change the key its give me error :
"encryption key must be 26 hexadecimal characters" .
View 3 Replies
View Related
Jan 22, 2013
I would like to be able to have a few "guest" users on the Wireless network for visitors. Is there any method to have a prompt for "Username / password"? I would like the user accounts to have different expiry periods if this is possible. My current config is attached. The SSID "test" appears on the network. The SSID "test111" does not appear.
View 1 Replies
View Related
Sep 14, 2012
I'm using the Express Security Set-up tab to configure an Aironet 1142 (stand-alone) access point with EAP.
Objective is to make it a RADIUS client and have laptops authenticate through this access point to a Windows 2008 NPS (Network Policy Server) using computer (machine) certificates - EAP-TLS.
When I select "EAP Authentication" under the "SSID Configuration" I was literally floored to see mention of WEP encryption (a security joke) and no possibility to prefer some variant of WPA (well, apparently not with EAP).
WPA2-Enterprise is what I've selected for "Authentication" and "AES" for encryption in Group Policy (so the laptop clients automatically connect to the access point).
WEP? I bought a Aironet 1142 access point for WEP encryption? How can I configure this securely?
These are currently configured settings as displayed under the "SSID Table" heading:
SSID - "MYSSID"
VLAN - none
Encryption - WEP Mandatory !!!
[Code].....
View 6 Replies
View Related
May 17, 2004
how i can limit the bandwidth for a all my client conect to the AP, i have a Aironet 1200 with the 12.2.15 code.
View 3 Replies
View Related
May 15, 2012
We had two dozen Aironet 1200 access points and a controller donated to us from a local hospital that no longer needed them. My boss would like me to set one up with 3 VLANs:
- encrypted VLAN for staff
- encrypted VLAN for students
- unencrypted VLAN for guests
Ultimately, we'd like the staff VLAN to have access to all internal network resources, the student VLAN to have access to several pre-defined printers, and the guest VLAN is web-only access. Whether the controller we were given will accommodate that, we won't know until we get one Aironet 1200 programmed and connected to the controller. For the time being, I just want to get this access point programmed with the 3 VLANs.
I'm easily able to get it running a single SSID (non-VLAN) network and confirm that I can use that network fine. However, I need to set up these 3 VLANs. I can connect to it via telnet if that'll let me program it faster.
View 7 Replies
View Related
Mar 26, 2012
I have some aironet 1200 AP's. I want to use this with a windows 2008 radius server. I followed the guide on [URL]. Unfortunately I can not get this working. In the securtiy log of the event viewer there is always the message "authenication was not succesful because an unknown username or incorrect password".
- Is it possible to get this working?
- If yes, is there a manual how to configure the AP's and the radius server, or are there any hints?
- Is this the best way to setup a wireless network or is there a better way?
I saw there is also a local radius server inside the 1200. Can all the 1200's work together? I suppose that if I use the built-in radius server than I can't make a connection to my AD database, correct?
View 3 Replies
View Related
Nov 20, 2012
I have this version Ap "c1200-rcvk9w8-tar.124-21a.JA2" and a WLC 5500. When i connect the ap to the network i can ping from ap to wlc and the wlc to ap, but the proccess of lwapp messages give errors on the Ap when the Ap try to download the image from wlc and could not join the wlc. why this could be? this is the info of the wireless lan controller.
View 6 Replies
View Related
Jan 25, 2012
I'd like to change the SSID name on Aironet 1200 which is currenty used by my wireless network.
View 3 Replies
View Related
Apr 4, 2013
I want to disable the MAC authentication that is configured in my Aironet 1200 Cisco Access Point, now set to "Local list only". I want that any wireless device can connect if the user knows the wep password.
I cannot find the option to disable the MAC authentication.
View 1 Replies
View Related
Dec 30, 2012
we have 6 access points in production and we want to chnage the IP addresses of them. So what would be the procedure for that.
View 17 Replies
View Related
Jan 20, 2012
I have cisco aironet 1200 series Acess point i want to configure wep with mac authentcation .
If any document with GUI configuration
View 11 Replies
View Related
Mar 13, 2011
Is it possible to setup a Cisco 1200 AP with 802.1x to drop users into the corprate network if they have a certificate or if not to put them on the guest network?
View 3 Replies
View Related
Jul 24, 2011
at one of my Aironet 1200 the update through web interface of the IOS seems failing. THe webpage now looks damaged and not all points are availible.
I now want to update the IOS through telenet. A TFTP server is running and it is sharing the actual TAR-file.
View 7 Replies
View Related
Jul 18, 2012
From what I've read, it doesn't seem possible to use Web Authentication and obtain encryption unless using a Radius server.
I have a client asking for web auth, encryption, and ldap connection to their AD servers.
View 4 Replies
View Related
Dec 5, 2012
I have two cisco airenet 1252 autonamous access point that are configured as point to point bridge. Now I want to confiure AES encryption or WPA2 using a pre-shared key however I do not see the option to do this . The only option I see under ciphers are:
wep 128
wep 40
TKIP
[Code].....
Is it possible to use either AES or WPA2 using a pre-shared key on the 1252 autonamous access point? preferably using the web interface.
View 3 Replies
View Related
Jun 19, 2011
Does Cisco 1142n Aironet Access Point support WPA-PSK with AES encryption ?
View 1 Replies
View Related
Nov 24, 2011
I have a Cisco Aironet 1200 Series Access Point. It takes long time to boot up.
After showing the warning banner message it takes long time before asking for username.
The sh version is given below.
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA4, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Tue 05-Sep-06 14:15
[Code].....
View 3 Replies
View Related
Jun 29, 2011
I have a Cisco 877 router at home, and I'm trying to configure it to act as a VPN server in order to be able to connect to my home network when I'm outside; I want it to work with standard Microsoft VPN client software (which supports PPTP and L2TP).
This is the output of the "show version" command:
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 15.0(1)M, RELEASE SOFTWARE (fc2)Technical Support: [URL] Copyright (c) 1986-2009 by Cisco Systems, Inc.Compiled Wed 30-Sep-09 08:42 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YI6, RELEASE SOFTWARE
The router has quite a basic setup: a single username with privilege level 15, a single VLAN comprising all four Ethernet ports, an ADSL connection to my ISP, an internal IP address of 192.168.42.1/24, an external IP address assigned by my ISP, NAT enabled.
This is my current configuration (stripped of non-relevant or private information):
service password-encryption
aaa new-model
aaa authentication login default local aaa authorization console aaa authorization exec default local
aaa session-id common
[Code]...
View 1 Replies
View Related
Mar 28, 2012
I try to setup a 1141 aironet AP to authenticate my user through our Ms Radius Server ( Win 2008 R2).Everything is fine with small Bussiness AP WAP4410N with the following configuration:But I can't setup successfully the aironet 1141 with the same settings and getting it works.Here is my configuration for the Aironet 1141 Vlan 1 is the ssid I want to get it work with Radius.
View 1 Replies
View Related
Feb 22, 2013
I am evaluating a Cisco wireless solution for our building. The building is occupied by two separate but related companies, which share some basic network infrastructure (some switches, an Internet connection, a DMZ environment), but which have two completely separate "Windows networks" with separate Active Directories. Each of these two networks are placed behind separate Microsoft TMG firewalls, each of whose external NIC are connected to the same DMZ network.
a) Acquire a set of Aironet 2600 APs and a controller, b) establish a BYOD SSID to be share between the two companies and guests, connected to the shared DMZ network, c) establish two additional separate SSIDs - one for each company’s staff, each authenticating against the appropriate AD-environment (incidentally, one is a straight Windows Server 2008 R2 environment with a TMG 2010 firewall and the other uses Windows Essential Business Server, so based on Window Server 2008).
Is that even possible with a single WLC?We are on 3 floors and about 60 people total. I am thinking that we can make do with 5 or 6 APs. Without having looked into it much, the 2500 controller looks good. Agree?
View 2 Replies
View Related
May 8, 2007
I am an IT professional that is installing my first extended range wireless AP in my companies warehouse. I am very excited!
Now I have set up many a linksys and repeater wireless networks, so when I was looking into the Aironet 1240AG I thought ?No Problem!?
And at first, it is not!
I have the AP and antenna set up here in my office before I take it out and mount it in the warehouse. And I can get connected to it, no security for now, no filters, I just want to connect and make it work.
I stay connected for maybe 3 minutes, I can get to the internet, I can ping all my servers. Full connectivity. But then for no reason the connection fails and I cannot reconnect.
The error I get in the log is
Interface Dot11Radio0, Deauthenticating Station 0006.2510.bbe3 Reason: Previous authentication no longer valid
So strange! So I have reset the AP to factory defaults and then set the SSID, and I can connect, again for a second, then nothing.
I have tried with multiple wireless cards, even laptops. Thinking maybe the problem was on the computer side.
View 12 Replies
View Related
Aug 2, 2011
I've set up a Cisco Aironet 1301 AP to be used for a guest network. I've got several other of the Aironet 1140-series around the business but none of them are in reach of this one at the moment.
The problem I have is that clients that try to connect to the AP are either not able to connect at all or lose their connection after some seconds. The config is more or less copied from the other APs with the same guest VLAN.
View 2 Replies
View Related
Sep 13, 2012
I have 3 Aironet 1260's with the same SSID and set with Open Authentication with MAC Authentication. Can I designate one of the 1260's as the MAC Authentication Server? I have all 3 now working with MAC Address Authenticated ty Local List Only and have to put the new MAC address in all 3.
View 3 Replies
View Related
Jun 3, 2012
I have a Cisco Aironet 1140 with ENABLED broadcasting SSID, encryption is WPA2(personal). Ubuntu 12.04 and Windows 7 are authenticated, but MACBooks never be authenticated. Any specific configuration for MAC books?
View 6 Replies
View Related
Feb 3, 2013
On an AIRONET 600 AP (officeExtend) with the remote LAN interface is configured to use 802.1x authentication:If a Cisco IP Phone is connected, 801.x authentication challenges for credentials. The AP does not seem to have a way to detect that this is an IP Phone and to skip the challenge (as Cisco switches/routers would do) Is there any way around this? Can the remote LAN interface be configured to skip authentication for IP Phone and only authenticate PCs etc..?
View 5 Replies
View Related
May 28, 2013
We have a 1200 Aironet just go down hard for no reason through out the day, we replaced the Power Injector with a C2960 POE Switch, we also replaced the cabiling. When it goes down hard all three lights are still green as if the AP is still up. We verified the IOS with other stores and everything is the same on the configurations, versions, and IOS.
View 35 Replies
View Related
Jun 9, 2012
I got my final assignment from school, and my teacher asked me to configure 2 Access Points (1200 series) directly on a Wireless Controler (Cisco 2106). I can't ask my teacher for any questions, cause he doesn't know how to configure it also, THAT's why he's asking me to do it.I've learned a lot of things about the default static interfaces (the "management" and "ap_manager" interface), but i can't seem to fully understand how to configure it.I want to use the Internal DHCP server of the WLC. How I can get those 2 Access Points working on the WLC. I only seem to get DHCP issues.
This is what i've done:
- Leave the configuration of the "management" and the "ap_manager" default (172.16.1.30 and 172.16.1.30). Bound to port 1
- Made a new interface "AP1" with IP-Address 10.0.0.10 (/24), default gateway 10.0.0.1. Primary DHCP server: 172.167.1.30
- Made a new interface "AP2" with IP-Address 192.168.1.10 (/24), default gateway 192.168.1.1. Primary DHCP server: 172.167.1.30
- Made 2 DHCP scopes within the 192.168.1.0 and 10.0.0.0 networks.
For some reason, when i boot up both AP's, the won't get any DHCP address.
View 13 Replies
View Related
Jul 19, 2011
I have two wireless networks configured in the AP1200, both SSIDs are configured with WPA.
SSID 01: configured whit WPA
SSID 02: configured whit WPA
I have configured the access-list number 700, and I would like to apply to a single network. Achieving the following:
SSID 01 : WPA + Mac Filter, using the ACL number 700.
SSID 02: WPA
How I can apply the list 700 to the first SSID only ??
View 5 Replies
View Related
Mar 17, 2013
I am looking at deploying a Cisco Virtual Wireless LAN Controller (vWLC 7.3).Do I need Prime Infrastructure to manage the environment, or can I manage my AP's (1200 series) using the vWLC alone?
View 6 Replies
View Related
Jun 7, 2012
I am using 5 Cisco 1200 Series APs with both an A and G radio. Is there a benefit/problem to running both simultaneously? I would have one SSID and is setup for Fast Roaming as well.
View 1 Replies
View Related
Nov 5, 2003
For the past week, I've been looking to implement wireless technology at our educational site. We've conducted some tests with an AP1200 and we were satisfied with the performances of 802.11a standards.
Since one of our requirements is bandwidth, we are looking to implement a 802.11g standard for that need. Unfortunately, Cisco does not offer any client access adapter for that 11g standard as opposed of the competition. What kind of client adapter (PCMCIA) can Cisco recommend to work with AP1200 under the 802.11g ?
View 5 Replies
View Related
Jan 23, 2012
I have 2 Cisco 1200 G AP's connecting 2 different locations. Location A ( La ) I have a RVO82 router connected to a 50Mbit cable connection. I have an AP setup there using a 1 Watt booster and a 24db wire grid directional antenna. Only one antenna here, the other disabled.
At Location B (Lb ), about 1.5 miles away, with good to excellent line of site, i have the other setup as a WGB with a 15db wire grid directional antenna with a 1 Watt booster. Also only one antenna here, the other disabled.
WGB feeds a simple 8 port switch and in that switch i have a simple belkin wireless router setup as an AP for Lb's wireless access,
The signal strenght between the two locations is -49 to -52 db, depending on what time of day I check it.
I have had this setup for a couple of years now. I recently switched from a 3Mbit DSL connection to the 50Mbit cable connection hoping to increase my bandwidth with no luck.
.
When I first set this up i had a 6Mbit cable connection and it maxxed out at 5 Mbit at Lb. I thought i would be able to add more boosters and antennas as time went on to go from half duplex to full duplex (the way i think of it is one antenna receiving and the other sending, at both locations) so that when our ISP had faster rates available, i could upgrade. I recently read somewhere on the net that it is not possible to run full duplex in the AP to WGB setup i have. Is that true?
My main concern is increasing bandwidth on the WGB side Lb. When i upgraded to 50Mbit, i still only max out at 5mbit at Lb. Before i thought it was due to not being full duplex or weaker signal strengths (I've always had the 1watt booster at Lb, then i added one later to La with no benefit noticed except signal strength is better and uploads seem faster from Lb....)
View 7 Replies
View Related
