Linksys Wireless Router :: Setup A DVR Camera System And Two Webpage Server Boxes Behind A WRT54GL?
Apr 6, 2010
I'm trying to setup a DVR camera system and two web page server boxes behind a Linksys WRT54GL. The problem I have is that all of the devices want to use port 80 to generate the web page. Individually, I can get the boxes to work, but when I try to put it all together everything seems to fall apart. I've got to the DVR set to External port 80, Internal Port 80 IP address 192.168.1.254. The web page server box I try to set to External port 8001, Internal port 80, IP address 192.168.1.200, when I try to save this setting I get the error message Internet IP address and LAN IP address are in the same subnet. If I change the web page server settings to External port 8001, Internal port 8001, IP address 192.168.1.200, it will save the settings, but it won't work that way because it won't actually generate a web page when I try to access that port.The error message doesn't seem to make since as all I'm changing is the port number, not the IP address or subnet mask.
View 9 Replies
ADVERTISEMENT
Dec 25, 2011
I need to change how my security is set on my wrt54gl... it has been so long I don't know the name or password I put it under.
View 1 Replies
View Related
Apr 20, 2012
Every time I try to connect to the admin page of my router, I get "The connection to the server was reset while the page was loading." This happens with FIrefox 11, and started when I upgraded to 8 or 9. A machine running FF 3.6 does not exhibit this problem; I get right in. What IE 9 says is "Internet Explorer cannot display the webpage" (after complaining about the expired certificate).
I ran Wireshark to see if I could learn anything, but all I could figure out was this: https handshake was OK. First TLS packet is received by router, which then immediately issues a reset and ends the connection. I don't know why.
have I got a screwed up configuration (or router)?
View 5 Replies
View Related
Sep 18, 2012
I want to use a linksys router with a 3com switch. 3Com model 3CGSU08A.i have two routers to choose from a E2000 and a WRT54GL which one is better and settings to use.
View 1 Replies
View Related
Dec 4, 2011
I have a Linksys Router that shows WRT54G Ver 3 on its base, but when I go in the settings I realized it says WRT54GL over there.
View 1 Replies
View Related
Sep 18, 2012
How to add a Linksys router for wireless access to a 3Com switch. model 3CGSU08A I have two choices for routers E2000 and a WRT54GL which one would be best and how to setup?
View 1 Replies
View Related
Jul 18, 2011
I have wrt54gl setup with dd-wrt standard version running hotspotsystem. 3 wrt54g version 5 with dd-wrt micro setup as WDS client of wrt54gl. After the intial setup I can log into the main router wrt54gl (192.168.1.1)and all 3 WDS routers (192.168.1.2 ,3 and 4), but after couple of days of testing suddenly i can not login to 2 of the WDS routers,
I mean I can connect to it and it will get me to internet but I can no longer login, it just says the page take too long to load. I know if I do a hard reset and setup WDS again then it will work, but I dont want to keep doing that. Tried to power cycle the router but still wont work. Is it the load on the router made it inaccessible ?
View 1 Replies
View Related
Mar 29, 2008
I have a Linksys WRT54GL version 1.1. The firmware is 4.30.11 (European version).In the Basic Wireless Settings I can't change the Wireless Channel. It remains at channel 1, and I simply can't alter it.This is strange, because in earlier firmware versions, I was able to change the channel without any problems at all. I would like to continue to use this firmware version. How can I solve this problem?
View 9 Replies
View Related
Mar 28, 2013
I have WRT54GL v1.1 with last firmware. How to specify L2TP server by domain name? I see only fields for IP.
View 4 Replies
View Related
Sep 28, 2012
I have my other XBOXs connected to a 24 port switch but the one connected to the ea6500 directly gives me this moderate NAT issue. I thought this new router would be an upgrade to my old dlink but so far I get a new problem every day.I have reserved dhcp addresses for all the boxes and set up port triggering for the ports listed in several guides. But what else do I need to do? Is it likely I got a bad router?
View 2 Replies
View Related
Sep 25, 2011
I've got threeLinux Boxes (running Centos 6). They were all connected to my cheap WRT54GL-- DHCP worked every time.Absolutely no problems. Both the LInux boxes and the WRT54GL had MTU set to manual, 1492.I replaced the WRTt54GL with the expensive E4200. I set the new router's MTU to manual, 1492. NONE of my Linux boxes ever receive a DHCP address. I look at the logs, and they do DHCPDISCOVER, get DHCPNACK, try several different intervals, and then fail the interface and quit.ALL I did was unhook cables from the WRT54GL and plug into the E4200. Yes, the WRT54GL was powered off. NOTHING was changed in the Linux configs. Yes, DHCP is enabled, address-range assigned, etc. BTW-- one box is dual boot with Win7-- in Win7 (using the same card, obviously), DHCP works just fine. But, Linux doesn't work.
I can give the boxes static IP's, and all is well. Just can't get DHCP to work. I evfen tried putting in DHCP reservations (via MAC assignments) for the E4200-- still doesn't work. The new E4200 is on the 02 firmware (which I believe is cuurent). If I can't iron this simple task out, in a couple of days I'm taking the E4200 back, and getting a refund. I'll stay with my old WRT54GL... it works. Hate to give up on some of the new E4200 features, though.
View 2 Replies
View Related
Mar 8, 2013
I am using 3G to access the internet on my PC. I have a 3G modem connected, and want to setup my Linksys WRT54GL router to enable wi-fi, so other devices can access the internet as well.
View 7 Replies
View Related
Mar 17, 2013
I have setup all the port forwarding etc. and am able to watch the camera from outside. Problem is it takes me to the web setup page. This creates problems if I want to give the URL to someone else. Is there anyway just to get the picture on an otherwise blank html page?
View 4 Replies
View Related
Aug 21, 2011
I'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.
Is there a device that I can use to get rid of the Cat5 cable in this scenario?
View 2 Replies
View Related
Jun 25, 2011
I have WRT54GL and want to setup wap54g as wireless repeater? I need to expand the signal using wap54g
View 1 Replies
View Related
Aug 11, 2011
I have just setup a E2000 at home. All the wireless connections work and also my NAS server who i wired. But when i try to setup my wired media server it will not connect.
View 6 Replies
View Related
Apr 18, 2013
I am looking at buying the EA6500 router. However, before I make the investment into buying this router, I need to know some basic information first.
1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server. Yes or No?
2. Remote access to the EA6500, Yes or No? i am aware of the security risks
3. I need to setup Port forwarding on the EA6500. I assume I can?
4. Manage a Kindle Fire and other wireless devices?
View 5 Replies
View Related
Mar 31, 2011
Alright, first off a little background. Im recent IT graduate (last spring) but not yet working in the field in any official capacitance. Its been about a year and half since I had my last Cisco class. Right now Im in the beginning process to work with locally own retailer setup a network infrastructure for IP camera and in the future VoIP, about 45 50 total IP devices when the project is complete.Nothing has been purchased yet but I have some candidates and a network layout planned, thought this is the first time Ie setup network of this type in the real world.Right now I looking at Netgear and LG/Ericsson (previously SMC, Nortel) switchesHavent gotten to the router yet and VoIP will come later.For either brand there would be one 1000MB 24 port switch and three 100MB switches, all of them 24 port and all will have PoE on all ports.[CODE]
View 4 Replies
View Related
Dec 29, 2012
I want to know how could I configure a Router Cisco DDR2201v1 for watching my IP Camera System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work.
View 2 Replies
View Related
Apr 27, 2012
I have netbook with win xp It is connected wirelessly to modem the internet was working until we upgraded the modem , now i see on the netbook that it is connected to internet but when i open internet page it dispays server not found I tried the answers posted to repair ip or winsock but it didn't work
View 20 Replies
View Related
Feb 15, 2013
I am a powerbook G4 user, Mac's wireless is good so far.OSX 10.4.11 and when I am using E1000 extender, often the admin page shows up automatically like 192.168.1.1 and asks me to log in and once I log into the admin page, of corse show up the admin page.So, all my other internet pages are gone every time.Only shows the admin page.It does not happen with windows PCs.
View 1 Replies
View Related
Jun 17, 2012
I trying to portforward on my WRT54G2 router but can't access webpage because I don't know the username or password. Is there any way to find out the password and username
View 1 Replies
View Related
Jun 25, 2011
I have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions). 1. My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable. 2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not (I have them named differently). How do I see both wireless connections?
View 9 Replies
View Related
Apr 18, 2013
WRT120N router: After several hours on the phone with Technical support I got nowhere. Guy had me putting in "admin" in the user name then the PW. I kept getting the 401 authorization required message. After all that I reset my router and used the disk to setup again. After that I went again to the 192.168.1.1 and got the request for authorization, entered admin in the PW and it does nothing, just reloads the request and browser keeps connecting. I have WIN 7 HP, use Firefox 5.0 mostly, but tried on IE8 as well and it does the same thing. I am attempting to open a port.
View 4 Replies
View Related
Mar 6, 2008
I own a wireless WRT54G, which has worked fine in the past. After setting up a new wireless network, I went to the router webpage to open some ports. The problem with the page loading is that it doesn't display correctly. No clickable text is displayed on the top of the page or the side bar, so I basically can't do anything whatsoever to configure it. I've tried loading it up in both Firefox and Internet Explorer, with IE saying the page loaded but with errors.
View 5 Replies
View Related
Mar 5, 2013
I'm having some difficulty getting into the settings web page on my e4200 router while the modem is running. I can access it soon as the modem is turned off. Additionally I downloaded the Android cisco express connect app for my tablet which does allow me to access the router while the modem is switched on.
View 5 Replies
View Related
Feb 28, 2013
I have a continuing problem with my WRT54G2 wireless router. I set up my network, changing the password for the router, and I change the SSID, as well as the encryption password. When I set it up, and after changing passwords etc. I always log off, go back and log on, and it works fine. Once I set up the network, over time, I'll notice a device will no longer connect via wireless. When that happens, I try to log on to the router, and can not connect to the router using either Firefox or IE. When I try, I get Internal Server Error, or just nothing. I can ping the router, and if I run an IPCONFIG at this point, the default gateway does show 192.168.1.1. Every time this starts to happen, I must do a hard reset of the router. Once I do this, I can connect, and log on using the default settings, and re-set everything. This is a HUGE pain, as it takes a lot of time, and happens way too often.
View 2 Replies
View Related
Jul 15, 2011
WRT120N router: After several hours on the phone with Technical support I got nowhere. Guy had me putting in "admin" in the user name then the PW. I kept getting the 401 authorization required message. I reset my router and used the disk to setup again. After that I went again to the 192.168.1.1 and got the request for authorization, entered admin in the PW and it does nothing, just reloads the request and browser keeps connecting. I have WIN 7 HP, use Firefox 5.0 mostly, but tried on IE8 as well and it does the same thing. I am attempting to open a port. Also the support site has been down for over 13 hours for routine maintenance service.
View 2 Replies
View Related
Aug 25, 2011
Downloading the latest firmware for the E3000. Seems like the link on the page is broken.
View 1 Replies
View Related
May 2, 2012
I have both a Sony XBR52HX909 and a Sony BDP-S580 connected to my router (WRT54GL)via ethernet. When I try to connect to the internet, both show the wired connection as good but neither can connect to the internet. The BDP-S580 also has wireless connectivity, but it can’t connect to the internet wirelessly. I have two desktop computers connected via ethernet and two laptops connected wirelessly to the same router and all have internet connectivity. I have tried the “auto” settings on the TV and Blu-Ray player and also tried entering the network information in manually. I still can’t connect to the internet.
View 5 Replies
View Related
Feb 5, 2011
Last week suddenly my internet connection failed. I have tried several times to establish the wireless internet connection. Everytime when i tried to do this, i get the message 'can not get IP address'. Already tried to upgrade the firmware but still same message appears.
View 4 Replies
View Related
Apr 14, 2010
I want to use my router to boost the signal to the 2nd floor of my house, and Im having some problems.When I connect my router to the web application to change restore it to manufaturer setting the router keeps broadcasting my old SSID. The laptops in the house pick up that signal. I want to reset my router so it can broadcast my new network.
View 2 Replies
View Related
Nov 10, 2011
I have Wireless-G Broadband router Model WRT54GL. Everything is all setup correct but consoles and handhelds can't get the IP address even if there connected to the router. It isn't intill I turn off and then it back on does it get the ip address.
View 2 Replies
View Related
