Linksys Wireless Router :: WRT54GL Setup Suddenly Not Letting To Change Wi-Fi Channel
Mar 29, 2008
I have a Linksys WRT54GL version 1.1. The firmware is 4.30.11 (European version).In the Basic Wireless Settings I can't change the Wireless Channel. It remains at channel 1, and I simply can't alter it.This is strange, because in earlier firmware versions, I was able to change the channel without any problems at all. I would like to continue to use this firmware version. How can I solve this problem?
View 9 Replies
ADVERTISEMENT
Dec 25, 2011
I need to change how my security is set on my wrt54gl... it has been so long I don't know the name or password I put it under.
View 1 Replies
View Related
Jan 16, 2008
I'm just finished with the wizard of my WRT54GL and follow the instructions in my user's manual I enter in the Web-based Utility of the router but I was surprised when I see that the language is French?! Once I choose the language for the wizard - english, it was english but now the Web-based Utility is in French. For luck I know some French from the high school but I prefer to work with English. How to change the language of the Web-based Utility from French to English
View 9 Replies
View Related
Nov 24, 2011
I've had my WRT54GL for a few months now and have two computers that are wired and 3 that are wireless. I started having problems with conflicting IP's a couple days ago on one of my wired computers which was set for auto DHCP so I changed the settings and made it a static IP, this is when the problem started. I have Network Magic on all computers and even though it says I'm connected to the internet and the network, I am not able to get online. My other wired computer has been on Static IP for months and works fine.
View 9 Replies
View Related
Jan 12, 2013
I just purchased a Linksys Cisco E900 router and hooked it up to my Internet cable. The Internet service that my ISP is giving me is PPPoE, fiber link (100 Mbps).
I did the set up. I connected my computer (via Ethernet cable) and my laptop (via wireless) to the router.
Now... there are other wireless networks around me. The WI-Fi channel my router fixed to is 1, apparently - saw it from the settings. But I can't find a menu anywhere in the router's gateway (192.168.1.1) from where I can change the wireless channel, wireless bandwidth etc.
View 2 Replies
View Related
Sep 18, 2012
I want to use a linksys router with a 3com switch. 3Com model 3CGSU08A.i have two routers to choose from a E2000 and a WRT54GL which one is better and settings to use.
View 1 Replies
View Related
Dec 4, 2011
I have a Linksys Router that shows WRT54G Ver 3 on its base, but when I go in the settings I realized it says WRT54GL over there.
View 1 Replies
View Related
Sep 18, 2012
How to add a Linksys router for wireless access to a 3Com switch. model 3CGSU08A I have two choices for routers E2000 and a WRT54GL which one would be best and how to setup?
View 1 Replies
View Related
Jul 18, 2011
I have wrt54gl setup with dd-wrt standard version running hotspotsystem. 3 wrt54g version 5 with dd-wrt micro setup as WDS client of wrt54gl. After the intial setup I can log into the main router wrt54gl (192.168.1.1)and all 3 WDS routers (192.168.1.2 ,3 and 4), but after couple of days of testing suddenly i can not login to 2 of the WDS routers,
I mean I can connect to it and it will get me to internet but I can no longer login, it just says the page take too long to load. I know if I do a hard reset and setup WDS again then it will work, but I dont want to keep doing that. Tried to power cycle the router but still wont work. Is it the load on the router made it inaccessible ?
View 1 Replies
View Related
Apr 6, 2010
I'm trying to setup a DVR camera system and two web page server boxes behind a Linksys WRT54GL. The problem I have is that all of the devices want to use port 80 to generate the web page. Individually, I can get the boxes to work, but when I try to put it all together everything seems to fall apart. I've got to the DVR set to External port 80, Internal Port 80 IP address 192.168.1.254. The web page server box I try to set to External port 8001, Internal port 80, IP address 192.168.1.200, when I try to save this setting I get the error message Internet IP address and LAN IP address are in the same subnet. If I change the web page server settings to External port 8001, Internal port 8001, IP address 192.168.1.200, it will save the settings, but it won't work that way because it won't actually generate a web page when I try to access that port.The error message doesn't seem to make since as all I'm changing is the port number, not the IP address or subnet mask.
View 9 Replies
View Related
Mar 8, 2013
I am using 3G to access the internet on my PC. I have a 3G modem connected, and want to setup my Linksys WRT54GL router to enable wi-fi, so other devices can access the internet as well.
View 7 Replies
View Related
Aug 25, 2012
How do I change the channel for my wireless router?
View 1 Replies
View Related
May 14, 2012
I need to know how to change the channel on my router so I do not keep getting disconnected when my telephone rings
View 2 Replies
View Related
Oct 11, 2012
How do I change my dlink 615 router channel?
View 1 Replies
View Related
Jul 6, 2012
i am connected to the net via LAN cable and accessed the router as admin and tried changing settings from removing encryption to different channel settings.
View 1 Replies
View Related
Oct 11, 2011
I have recently purchased an Xbox slim for my son which has a built in wireless adapter. Since he has had this he gets a poor connection on Xbox live, the previous Xbox had the external adaptor which worked fine but sold it thinking he would not need it with the new improved built in wi-fi.I have also tried my xbox in his room and there was no difference, so we know its not the Xbox, various other pieces of kit like boosters etc. I have a Netgear WNR 1000v2 and have not the foggiest idea how to change channels.
View 1 Replies
View Related
Jun 25, 2011
I have WRT54GL and want to setup wap54g as wireless repeater? I need to expand the signal using wap54g
View 1 Replies
View Related
Aug 27, 2012
I have 3xLAP1242 in a building that are some what close to eachother (WCS show them as Rx Neighbors). The problem is that they are all running the same channel, 1 on 2.4GHz and channel 140 on 5GHz. [code]Ether I get these log messages because they are on the same channel or because there is something blocking the other channels.Can I force a channel change on the LAPs somehow? Not manualy setting the channels, but forcing the LAPs to redo their channel calculation/algorithm.
View 12 Replies
View Related
Jun 13, 2013
how to change the wireless channel for windows 7 on the router belkin play max n600 hd model F7D4401 Dual-Band
View 1 Replies
View Related
Feb 19, 2012
I want to control my homes X10 Devices (lights on/off, close garage door, etc) using an iPhone application.
View 7 Replies
View Related
Jul 5, 2012
How do I change the channel on my WAP45. I can't connect I get a message unidentied-no access
View 1 Replies
View Related
Feb 12, 2012
I'm having trouble seeing my PC from my XBox (I want to use WMC to stream video to XBox). Here's my setup:
ISP provided modem (No branding), connected to my PC Network out (Wired) from modem to Dlink DIR-665 router (which is broadcasting WIFI) Network out (Wired) from Dlink router to XBox
I'm online with the XBox with no issue, but I can't access the PC through Media Centre with this setup. When I connect the XBox to the modem directly, I also have no issues. I'm using Norton Internet Security 2012 if that could be the issue.
View 15 Replies
View Related
May 2, 2012
I have both a Sony XBR52HX909 and a Sony BDP-S580 connected to my router (WRT54GL)via ethernet. When I try to connect to the internet, both show the wired connection as good but neither can connect to the internet. The BDP-S580 also has wireless connectivity, but it can’t connect to the internet wirelessly. I have two desktop computers connected via ethernet and two laptops connected wirelessly to the same router and all have internet connectivity. I have tried the “auto” settings on the TV and Blu-Ray player and also tried entering the network information in manually. I still can’t connect to the internet.
View 5 Replies
View Related
Feb 5, 2011
Last week suddenly my internet connection failed. I have tried several times to establish the wireless internet connection. Everytime when i tried to do this, i get the message 'can not get IP address'. Already tried to upgrade the firmware but still same message appears.
View 4 Replies
View Related
Apr 14, 2010
I want to use my router to boost the signal to the 2nd floor of my house, and Im having some problems.When I connect my router to the web application to change restore it to manufaturer setting the router keeps broadcasting my old SSID. The laptops in the house pick up that signal. I want to reset my router so it can broadcast my new network.
View 2 Replies
View Related
Nov 10, 2011
I have Wireless-G Broadband router Model WRT54GL. Everything is all setup correct but consoles and handhelds can't get the IP address even if there connected to the router. It isn't intill I turn off and then it back on does it get the ip address.
View 2 Replies
View Related
Jun 20, 2012
I'm trying to use a WRT54GL with U-Verse. The problem is that the router does not get a connection to the modem. It can't ping the modem, and it doesn't show up on on the list of devices connected to the modem. DHCP assigns an IP address of 127.0.0.1, which is outside the range of the modem [192.168.1.1 ... 192.168.1.253]. The router is also showing a default gateway of 0.0.0.0, and a subnet mask of 255.0.0.0. (And yes, I have released and renewed the lease, rebooted the modem, and reconnected the modem.) The router WAN side is set to DHCP, and the operating mode was changed from gateway to router (the gateway setting doesn't work either, for that matter).
View 9 Replies
View Related
Mar 16, 2011
I currently own a LinkSys-WRT54GL 802.11a/b/g wireless router, and my ISP is Comcast Cable providing me with 15 Mbps (that's bits per second, I believe) download speed. I am wondering if there is any benefit with using an 802.11n wireless router to access the Internet? The maximum theoretical speed of the WRT54GL router is 54 Mbps (802.11g), which is faster than the 15 Mbps provided by my ISP.
I know that 802.11n has a max bandwidth of 300 Mbps, and it would work for intra- house transfers, such as streaming video from one computer to another.
But is there any benefit to 802.11n for Internet activity, such as web browsing, gaming, and streaming video from Netflix.
View 3 Replies
View Related
Aug 26, 2011
I had configured the AAA server on CoovaAP and was able to access the internet.I had configured the user name and password as a "testuser" and "password" respectively. With that user id i used to access the Coova AP router and internet.Now i want restore the WRT54GL firmware on Lynksys router. But with the used id and password which i had configured the router is not at all accessible. So i did 30-30-30 reset on the router 2-3 times. Now i can see openwrt login page with 192.168.1.1 IP address. It is asking for user id and password. I tried all the combinations of user id and password, but no luck. I browsed some link on the internet and some people have recommended that default user id as a "root" and blank password. But with that also the router is not accessible. I cant to do much on the router untill i will log in to router. I have spent lot of time on this. How to restore back the original WRAT54GL firmware on my router. Anyhow i want WRAT54GL firmware on Lynksys router
View 4 Replies
View Related
Sep 7, 2011
I recently had to unplug my Linksys WRT54GL wireless router when doing some rearranging and now i'm unable to get a internet connection. I've confirmed the modem is actually working by connecting my laptop directly (which worked), but when I connect the Linksys WRT54GL wireless router to my modem the internet connection goes away. The connection is lost when connected via wireless and hardwired to one of the back ports. I've tried resetting the modem, router and computer and read every forum out there trying to find something, but i'm still stuck.
View 5 Replies
View Related
May 8, 2013
I have a problem with my linksys WRT54GL router. I entered here [URL] and i set it up, i can connect to internet on my PC and wireless works great but i can't set wireless password and name. When i go to the wireless tab, i write the new name but when i hit seve setting i get disconnected from internet. I try to go to status and click on Connect tab, when is connected internet works but the name and the password of the wireless that i set earlier is reset to default. What do i have to do to set name and password and have internet at the same time.
View 7 Replies
View Related
Jul 8, 2011
I would like to connect my old WRT54G3G router to my new WRT54GL (connect to dsl modem) and have wireless on both activated.I have set both on different channels with same SSID and same passwords on WPA2 Personal AES.I have also made the network IP different WRT54G3G 192.168.0.99 and WRT54GL 192.168.0.98.I have also deactivated network DHCP on 192.168.0.99. and Operating mode to router and still not working.
View 1 Replies
View Related
Jan 24, 2012
not being able to block websites like facebook and youtube on the router.
View 4 Replies
View Related
