Change The Channel For Wireless Router?

Aug 25, 2012

How do I change the channel for my wireless router?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: E900 - Menu To Change Channel And Bandwidth

Jan 12, 2013

I just purchased a Linksys Cisco E900 router and hooked it up to my Internet cable. The Internet service that my ISP is giving me is PPPoE, fiber link (100 Mbps).
 
I did the set up. I connected my computer (via Ethernet cable) and my laptop (via wireless) to the router.
 
Now... there are other wireless networks around me. The WI-Fi channel my router fixed to is 1, apparently - saw it from the settings. But I can't find a menu anywhere in the router's gateway (192.168.1.1) from where I can change the wireless channel, wireless bandwidth etc.

View 2 Replies View Related

Linksys Wireless Router :: WRT54GL Setup Suddenly Not Letting To Change Wi-Fi Channel

Mar 29, 2008

I have a Linksys WRT54GL version 1.1. The firmware is 4.30.11 (European version).In the Basic Wireless Settings I can't change the Wireless Channel. It remains at channel 1, and I simply can't alter it.This is strange, because in earlier firmware versions, I was able to change the channel without any problems at all. I would like to continue to use this firmware version. How can I solve this problem?

View 9 Replies View Related

How To Change Channel On Router

May 14, 2012

I need to know how to change the channel on my router so I do not keep getting disconnected when my telephone rings

View 2 Replies View Related

Change D-link 615 Router Channel

Oct 11, 2012

How do I change my dlink 615 router channel?

View 1 Replies View Related

Netgear WNR 1000v2 - Channel Change Router

Oct 11, 2011

I have recently purchased an Xbox slim for my son which has a built in wireless adapter. Since he has had this he gets a poor connection on Xbox live, the previous Xbox had the external adaptor which worked fine but sold it thinking he would not need it with the new improved built in wi-fi.I have also tried my xbox in his room and there was no difference, so we know its not the Xbox, various other pieces of kit like boosters etc. I have a Netgear WNR 1000v2 and have not the foggiest idea how to change channels.

View 1 Replies View Related

Cisco Wireless :: 3xLAP1242 Force Channel Change On LAP

Aug 27, 2012

I have 3xLAP1242 in a building that are some what close to eachother (WCS show them as Rx Neighbors). The problem is that they are all running the same channel, 1 on 2.4GHz and channel 140 on 5GHz. [code]Ether I get these log messages because they are on the same channel or because there is something blocking the other channels.Can I force a channel change on the LAPs somehow? Not manualy setting the channels, but forcing the LAPs to redo their channel calculation/algorithm.

View 12 Replies View Related

Belkin Routers :: F7D4401 Change Wireless Channel For Windows 7

Jun 13, 2013

how to change the wireless channel for windows 7 on the router belkin play max n600 hd model F7D4401 Dual-Band

View 1 Replies View Related

How To Change The Wifi Channel Of A Hotspot

Mar 24, 2011

I need to know how to change the wifi channel of the connection. connectify can't do it. I guess you have to set it somewhere in the network card settings, but I'm quite a noob when it's about wireless network. googling my problem didn't get me any good result since all the threads about channel setup are about modem/router wifi channel setting, can't find anything about hotspots.

View 7 Replies View Related

Cisco :: 1242AG / Change RF Channel On APs On NCS?

May 30, 2012

I'm looking to make a few adjustments to out wireless network and need to change the RF channels on a few APs.I've logged on to NCS went into the AP, an 1142N,  then the Radio 802.11 b/g/n and changed the RF channel under custom.Once I pressed the save button the channel reverts back to its original channel. I've also tried this on a 1242AG the same thing happens. I then went to the controller and tried to change the RF channel there and it took the change. I pressed apply logged out went back to NCS made the change under custom and again it reverted back after I pressed the save button. I went back into the controller and the channel had also reverted back even thought it gave the impression it took the changel.

View 1 Replies View Related

D-Link DIR-615 :: Configuration Page Is All Greyed Out - Can't Change Channel

Nov 22, 2010

I bought this wireless router the other day in order to get internet access on my Nintendo Wii. I set it up using the CD and followed all the instructions (made a password, wrote down the key, etc.) - and my Wii CAN detect it, but when I type in the key on the Wii I get an error message. I looked online and they said the way to fix that specific error is to "change the channel" on the router to 1 or 11. (It is currently 6). I type in my IP into the browser like I'm supposed to (the default IP of the router), but ALL the options on the page are greyed out and nothing is click-able. Here's a screenshot

View 3 Replies View Related

Cisco Switching/Routing :: Nexus 5000 To Change VLan Port Channel

Jan 29, 2013

I'm trying to change a vlan on a port-channel but I am getting this error when I apply the change:" error: command is not mutually exclusive",I have done this in the past but I cannot remember exactly what I should type to apply the change.

View 2 Replies View Related

Cisco Switching/Routing :: Change Number Of Internal Port-channel On Nexus 5000

Jan 3, 2012

I'm in the middle of a Nexus 5000 project and recognized today while configuring port-channels, that some of the interface numbers are reserved for internal use.
 
Is it possible to change or configure which port-channel interface numbers are allocated for internal use by NX-OS?
 
Unfortunatly I wasn't able to find a solution for this issue in the offical Nexus documentation, the search function of this forum or Google. If I did miss something or didn't look careful enough at the Nexus docs, I'm also happy with RTFM (... fine manual) responses and links to the info :-)
 
Additional info:
 
Nexus5k(config)# interface port-channel 128 ignored port-channel128: internally used, configuration not allowed
 
Port-Channels 111, 113, 115, 119, 121, 200, 211, 222 were created manually, but 127 - 129 were not.
 
Nexus5k# show port-channel usage
Total 11 port-channel numbers used
============================================
Used  :   111 , 113 , 115 , 119 , 121 , 127 - 129 , 200 , 211 , 222
Unused:   1 - 110 , 112 , 114 , 116 - 118 , 120 , 122 - 126 , 130 - 199
201 - 210 , 212 - 221 , 223 - 4096

[Code]......

View 3 Replies View Related

Linksys Access Point :: Cannot Change Channel On WAP45 - Unidentified / No Access?

Jul 5, 2012

How do I change the channel on my WAP45. I can't connect I get a message unidentied-no access

View 1 Replies View Related

Linksys Wireless Router :: EA4500 Only Uses 2.4 Ghz Channel?

Dec 19, 2012

I downloaded and installed inSSider for Windows and, under the 2.4 Ghz tab, I can clearly see the Router SSID, on Channel 6, exactly as configuredbin the Router. However on the 5 Ghz tab, nothing? I can see Channels 36, 40, 44, 48, 52 and so on BUT no trace of any wireless signal here?I carefully reviewed the wireless settings options and it is indeed enabled.

View 1 Replies View Related

Linksys Wireless Router :: What Channel E4200 Is Currently Using

Jul 31, 2011

I am trying to figure out what channel my Linksys E4200 is CURRENTLY using (at the time I check it)I am having issues with occassionally losing my connection (mostly from the computer furthest from the router) and it may be caused by a cordless phone , in the room with that computer as I think the problem only occurs when on the phone in that room.So I am trying to determine what channel that it may be using at the time of the drops ...(so I can set it NOT to use that channel)I'm pretty sure it it something on the 5ghz (40mhz)side .but I don't really want to set the router to use 20mhz only as the speed greatly drops when on 20mhz only (i.e. 50mbps vs up to 200mbs when 5ghz is activated)
 
Checking my Router set up page, I see only what channels is CAN use, not what is currently being used.Is there anyway to identify what channel it is currently using so I can see if it is a specific channel causing the issue and not have to switch off 40mhz?

View 3 Replies View Related

Linksys Wireless Router :: Changing WRT54G Channel?

Apr 23, 2011

How do I change the channel on my Linksys WRT54G2 ROUTER?

View 3 Replies View Related

Linksys Wireless Router :: Macbook Pro And 5.8 Ghz Channel On WRT610N?

Feb 17, 2010

Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N.  I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel.  Linksys support told me that the hardware was not compatible with the high channel.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 5GHz Channel Is Not Complete

Dec 25, 2012

EA6500 5GHz band only four channels (36,40,44,48), the lack of 149,153,157,161 channel, firmware Ver.1.1.28.146072, how to add 149,153,157,161 channels?

View 3 Replies View Related

Linksys Wireless Router :: E3000 Dropping Packets On Any Channel But 1

Jul 24, 2012

My E3000 has about 60% packet loss if the channel selected is anything other than 1.  I can't enable 5GHz or even 40mhz 2.4GHz channels without dropping 60% packets.

View 9 Replies View Related

Linksys Wireless Router :: WRT320N Automatic Channel Selection?

Apr 18, 2010

I am working with a WRT320N for some weeks now, but I don't get the fact that 40Mhz channel width is only allowed for Automatic channel selection.I keep losing connection and the channel keeps changing.I want an option to change the channel manually (like in every good WLAN router!!), also with N data rate (40Mhz channel width).I know how to select the best channel, so why aren't I able to change it the way I like it?

View 4 Replies View Related

Linksys Wireless Router :: E4200 2.4 Channel Extremely Slow

Apr 6, 2011

E4200 2.4 channel extremely slow. 

View 7 Replies View Related

Linksys Wireless Router :: E3200 - Channel 1 And 2 Signal Collapse

Feb 19, 2013

Channel 1 & 2 Signal Collapse. Just recently purchased the E3200. 
 
When I set the 2.4GHz band to Channel 1 or 2, the signal is unstable. According to WiFi Analyzer, the signal keeps appearing and disappearing every couple seconds. 
 
But my neighbor's router that's on channel 1 or 2 remains stable, so it's not a problem with WiFi Analyzer.

Firmware: 1.0.04 

View 3 Replies View Related

Linksys Wireless Router :: EA6500 2.4 Ghz Channel Width / Speed

Nov 1, 2012

What's the point for two options, auto or 20 mhz only? there is no third option so if you choose auto its still 20 mhz am i right?BTW i had to change channel width to 20 mhz only because under auto the speed was horrible.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 5GHz Channel Is Not Complete

Dec 14, 2012

EA6500 5GHz band only four channels (36,40,44,48), the lack of 149,153,157,161 channel, firmware Ver.1.1.28.146072,how to add 149,153,157,161 channels.

View 3 Replies View Related

Linksys Wireless Router :: EA3500 Won't Channel Bond - Connects Only At 144mbps?

May 6, 2012

i can only connect to my router at 144mbps(wireless N) every so often i notice my  router will channel bond to 11+7, and i can connect at 300mbps!(lasts like 5 minutes) then just randomly dies and will only reconnect at 144mbps. Its not a wireless card problem since my old netgear 3700 died on me it connected up just fine at 300mbps.i use inSSIDer and i can verify that it only connects using 1 channel(i've set to auto) and tried setting to each individual channel.

View 1 Replies View Related

Linksys Wireless Router :: E2500 Unable To See 5GHz Channel SSID

Jul 1, 2012

I've recently purchased the E2500, done the setup but am facing some issues.I'm unable to see the 5GHz channel SSID, I can only see the 2.4GHz channel SSID.Have tested all the laptops and devices at home and all can't see the 5GHz channel.The list of devices are:
 
a) iPhone 3GS
b) iPhone 4G
c) iPhone 4GS (some sites says it doesn't support, some says it does, I'm confused as a result)
d) Samsung laptop
e) Dell laptop
f) Momo11 Little Bird Edition tablet (Made in China [MIC])
g) No name MIC tablet
 
Secondly, is there any tips / tricks to tweak the modem to increase the internet speed?

View 1 Replies View Related

Linksys Wireless Router :: Unable To Set 5ghz 80 Mhz Channel Width On EA6500

Mar 5, 2013

My desktop pc has an Asus PCE-AC 66 PCI card (supports up to 1300 mbps wifi) and is only 5m or so away from the the EA6500 router without any obstructions - yet i cannot connect at 1300 mbps AC wifi. On the EA6500 router, i have selected 'mixed' as network mode under 5ghz (since i have some other devices which connect on wifi N on 5ghz) but if i select channel width as 80mhz, i have issues connecting to the 5ghz network on the desktop pc. The desktop briefly connects and under status it says lan speed as 1.3gbps but then it disconnects and i can't connect again. If i select channel width as 'auto' then no problems, the desktop can connect but lan speeds are only 400-600 mbps. why i cannot connect at 1300 mbps?

View 6 Replies View Related

Linksys Wireless Router :: E3000 5Ghz Auto(DFS) Versus Selecting Channel

Nov 15, 2012

I have an E3000 Dual Band. On my 5Ghz channel, I can select Auto(DFS) or I can manually select a channel.First of all, what does the DFS stand for? My 2.4 GhZ channel only has Auto, not Auto(DFS).
 
Second, when I select Auto(DFS), my wireless speed defaults to 144Mbps, and is only a single channel (I can see it in the in SSIDer utility). When I manually select a channel, no matter what channel it is, I get 300mbps and I can see that the signal is two channels (for instance, 36+40). Why Auto(DFS) doesn't automatically select the best channel and fastest speed?

View 2 Replies View Related

N450 Router And WAP- Same Channel Range Of Different?

Oct 5, 2012

I have my buffalo N450 router working great and have installed a Belkin 600HD as a wired WAP. Now I am trying to fine tune them to get the greatest coverage and throughput. What do you guys recommend in terms of channel selection. Should I try to cover different channels with each router or keep them the same? I have been using inSSIDer to try and watch the strength and width of various settings. It seems I get better strength (at least according to Windows 7) when I have the channels set the same.

View 4 Replies View Related

Changing Channel On D-link N300 DIR 15 Router?

Dec 10, 2011

I have a new SMART T.V. I have no trouble hooking up wirelessly to my N300 router, I can get on the internet without any problem. Then I added a wireless speaker system, now the T.V. won't hook up to the router any more. My question is, how do I change channels on the N300 DIR 615 router so that I can get away from the interference caused by the wireless speaker system?

View 3 Replies View Related

Broadband :: Router / Access Point Channel Conflict?

Mar 23, 2011

How do I improve my Wireless Network Environment

View 2 Replies View Related

How To Change Wireless Router Password

Feb 23, 2013

I need to change my wireless router password

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved