Linksys Wireless Router :: Changing WRT54G Channel?

Apr 23, 2011

How do I change the channel on my Linksys WRT54G2 ROUTER?

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT54G - Printer IP Address Keeps Changing

Jul 4, 2011

Much of the time my wireless printer is offline relative to computers on my LAN because the IP Address has been changed to some value different than what the computer thinks it should be.  So I have to figure out what the IP Address is of the printer then modify the printer port on the PC to point to the correct address.  If this only happened rarely or if I could easily remember the steps I have to take to remedy the situation, I guess this would not be such a big deal.  But it happens a lot and I'm old and alzheimery.  So my question is: how do I get the router to assign the same IP Address to the printer all of the time?

View 2 Replies View Related

Linksys Wireless Router :: WRT54G V8 - Router Won't Work After Changing SSID

Dec 1, 2011

I just reset my router to the factory settings in order to make some changes to it. However, when I tried to change the SSID to a unique name, I was unable to connect my computer to the wireless network. I then reset my security settings and left the SSID to the default name "linksys_SES_54125" and it is working just fine. I tried to connect with two separate computers both running Windows 7. My router is the WRT54G v8
 
why I wouldn't be able to connect to my wireless network when I change the SSID?

View 5 Replies View Related

Changing Channel On D-link N300 DIR 15 Router?

Dec 10, 2011

I have a new SMART T.V. I have no trouble hooking up wirelessly to my N300 router, I can get on the internet without any problem. Then I added a wireless speaker system, now the T.V. won't hook up to the router any more. My question is, how do I change channels on the N300 DIR 615 router so that I can get away from the interference caused by the wireless speaker system?

View 3 Replies View Related

Changing From A Linksys Wrt54g To D-link DIR-815

Feb 27, 2012

We are trying to change our already wireless router to a new wireless router. Changing from a lynksis wrt54g to a d-link DIR-815.We tried using the quick router setup wizard they provided but it wasn`t able to connect to the internet to continue, then we tried manual setup (going on the web-based connection thing) since the wizard stopped working and we tried a manual setup.

View 3 Replies View Related

Linksys Wireless Router :: EA4500 Only Uses 2.4 Ghz Channel?

Dec 19, 2012

I downloaded and installed inSSider for Windows and, under the 2.4 Ghz tab, I can clearly see the Router SSID, on Channel 6, exactly as configuredbin the Router. However on the 5 Ghz tab, nothing? I can see Channels 36, 40, 44, 48, 52 and so on BUT no trace of any wireless signal here?I carefully reviewed the wireless settings options and it is indeed enabled.

View 1 Replies View Related

Linksys Wireless Router :: What Channel E4200 Is Currently Using

Jul 31, 2011

I am trying to figure out what channel my Linksys E4200 is CURRENTLY using (at the time I check it)I am having issues with occassionally losing my connection (mostly from the computer furthest from the router) and it may be caused by a cordless phone , in the room with that computer as I think the problem only occurs when on the phone in that room.So I am trying to determine what channel that it may be using at the time of the drops ...(so I can set it NOT to use that channel)I'm pretty sure it it something on the 5ghz (40mhz)side .but I don't really want to set the router to use 20mhz only as the speed greatly drops when on 20mhz only (i.e. 50mbps vs up to 200mbs when 5ghz is activated)
 
Checking my Router set up page, I see only what channels is CAN use, not what is currently being used.Is there anyway to identify what channel it is currently using so I can see if it is a specific channel causing the issue and not have to switch off 40mhz?

View 3 Replies View Related

Linksys Wireless Router :: Macbook Pro And 5.8 Ghz Channel On WRT610N?

Feb 17, 2010

Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N.  I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel.  Linksys support told me that the hardware was not compatible with the high channel.

View 3 Replies View Related

Linksys Wireless Router :: Changing Password In EA2700?

May 14, 2013

I want to change password in my EA2700 but don't know how to do it. How to change password in EA2700?

Looking for [url]
Find the best [url]

View 1 Replies View Related

Linksys Wireless Router :: EA6500 5GHz Channel Is Not Complete

Dec 25, 2012

EA6500 5GHz band only four channels (36,40,44,48), the lack of 149,153,157,161 channel, firmware Ver.1.1.28.146072, how to add 149,153,157,161 channels?

View 3 Replies View Related

Linksys Wireless Router :: E3000 Dropping Packets On Any Channel But 1

Jul 24, 2012

My E3000 has about 60% packet loss if the channel selected is anything other than 1.  I can't enable 5GHz or even 40mhz 2.4GHz channels without dropping 60% packets.

View 9 Replies View Related

Linksys Wireless Router :: WRT320N Automatic Channel Selection?

Apr 18, 2010

I am working with a WRT320N for some weeks now, but I don't get the fact that 40Mhz channel width is only allowed for Automatic channel selection.I keep losing connection and the channel keeps changing.I want an option to change the channel manually (like in every good WLAN router!!), also with N data rate (40Mhz channel width).I know how to select the best channel, so why aren't I able to change it the way I like it?

View 4 Replies View Related

Linksys Wireless Router :: E4200 2.4 Channel Extremely Slow

Apr 6, 2011

E4200 2.4 channel extremely slow. 

View 7 Replies View Related

Linksys Wireless Router :: E3200 - Channel 1 And 2 Signal Collapse

Feb 19, 2013

Channel 1 & 2 Signal Collapse. Just recently purchased the E3200. 
 
When I set the 2.4GHz band to Channel 1 or 2, the signal is unstable. According to WiFi Analyzer, the signal keeps appearing and disappearing every couple seconds. 
 
But my neighbor's router that's on channel 1 or 2 remains stable, so it's not a problem with WiFi Analyzer.

Firmware: 1.0.04 

View 3 Replies View Related

Linksys Wireless Router :: EA6500 2.4 Ghz Channel Width / Speed

Nov 1, 2012

What's the point for two options, auto or 20 mhz only? there is no third option so if you choose auto its still 20 mhz am i right?BTW i had to change channel width to 20 mhz only because under auto the speed was horrible.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 5GHz Channel Is Not Complete

Dec 14, 2012

EA6500 5GHz band only four channels (36,40,44,48), the lack of 149,153,157,161 channel, firmware Ver.1.1.28.146072,how to add 149,153,157,161 channels.

View 3 Replies View Related

Linksys Wireless Router :: E1000 - Can't Access Router Settings After Changing To Static IP

Jun 26, 2012

I installed an IP camera, and had to change my E1000 router settings to a static IP address.  Now I can't access the router settings.  192.168.1.1 is still the default gateway, but it won't open in any browser.
 
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place.  I'm not very good at this stuff, and it's a small miracle that I did it once.  

View 4 Replies View Related

Linksys Wireless Router :: (PS3) Changing NAT Type To Open For WRT150N

Dec 31, 2011

chaning the NAT Type to open because I can't play with some of my friends on Playstation.

View 2 Replies View Related

Linksys Wireless Router :: Changing Operation Speed Of WRT160N V3

Mar 29, 2012

I'm using the Linksys WRT160N V3 for testing a few ambedded applications.I need to set the speed of operation of the router to 100Mbps. (or at least find out what speed it currently supports) I looked up the router home page and couldn't find anything concrete.

View 3 Replies View Related

Linksys Wireless Router :: Changing Look Of Welcome Page (guest Login)

Feb 9, 2013

Is it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and  and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.

View 2 Replies View Related

Linksys Wireless Router :: WTR160N - Changing From Unsecured To Secured

Dec 13, 2012

I have a WTR160N-RM.  I just moved and the cable technician hooked it up unsecured.  I didn't catch it until he left.  I can access the Linksys webite with the standard IP address and generic password, but I'm not sure what needs to be changed.  I've looked at several UTube videos and read some online instructions, but they all different a bit.  How I can secure my wireless again?  I have an old Toshiba LT that just keeps on tickin'.

View 7 Replies View Related

Linksys Wireless Router :: EA3500 Won't Channel Bond - Connects Only At 144mbps?

May 6, 2012

i can only connect to my router at 144mbps(wireless N) every so often i notice my  router will channel bond to 11+7, and i can connect at 300mbps!(lasts like 5 minutes) then just randomly dies and will only reconnect at 144mbps. Its not a wireless card problem since my old netgear 3700 died on me it connected up just fine at 300mbps.i use inSSIDer and i can verify that it only connects using 1 channel(i've set to auto) and tried setting to each individual channel.

View 1 Replies View Related

Linksys Wireless Router :: E2500 Unable To See 5GHz Channel SSID

Jul 1, 2012

I've recently purchased the E2500, done the setup but am facing some issues.I'm unable to see the 5GHz channel SSID, I can only see the 2.4GHz channel SSID.Have tested all the laptops and devices at home and all can't see the 5GHz channel.The list of devices are:
 
a) iPhone 3GS
b) iPhone 4G
c) iPhone 4GS (some sites says it doesn't support, some says it does, I'm confused as a result)
d) Samsung laptop
e) Dell laptop
f) Momo11 Little Bird Edition tablet (Made in China [MIC])
g) No name MIC tablet
 
Secondly, is there any tips / tricks to tweak the modem to increase the internet speed?

View 1 Replies View Related

Linksys Wireless Router :: Unable To Set 5ghz 80 Mhz Channel Width On EA6500

Mar 5, 2013

My desktop pc has an Asus PCE-AC 66 PCI card (supports up to 1300 mbps wifi) and is only 5m or so away from the the EA6500 router without any obstructions - yet i cannot connect at 1300 mbps AC wifi. On the EA6500 router, i have selected 'mixed' as network mode under 5ghz (since i have some other devices which connect on wifi N on 5ghz) but if i select channel width as 80mhz, i have issues connecting to the 5ghz network on the desktop pc. The desktop briefly connects and under status it says lan speed as 1.3gbps but then it disconnects and i can't connect again. If i select channel width as 'auto' then no problems, the desktop can connect but lan speeds are only 400-600 mbps. why i cannot connect at 1300 mbps?

View 6 Replies View Related

Linksys Wireless Router :: E900 - Menu To Change Channel And Bandwidth

Jan 12, 2013

I just purchased a Linksys Cisco E900 router and hooked it up to my Internet cable. The Internet service that my ISP is giving me is PPPoE, fiber link (100 Mbps).
 
I did the set up. I connected my computer (via Ethernet cable) and my laptop (via wireless) to the router.
 
Now... there are other wireless networks around me. The WI-Fi channel my router fixed to is 1, apparently - saw it from the settings. But I can't find a menu anywhere in the router's gateway (192.168.1.1) from where I can change the wireless channel, wireless bandwidth etc.

View 2 Replies View Related

Linksys Wireless Router :: E1500 After Changing Name / Password / Speed Became Much Slower

Jun 24, 2012

After changing name and password, the speed became much slower. Checking it with speed test, download is just 0.19 Mbps while upload is 3 Mbps. Wired speed is much better, download is 20 Mbps. So it is not the problem of I provider, comcast. How to solve this problem? I rebooted and reset it already.

View 8 Replies View Related

Linksys Wireless Router :: E3000 Adding To Network Without Changing Anything On RouteFinder

Jan 5, 2012

I am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users.  The main router is a RouteFinder SOHO VPN (RF560).  The RouteFinder acts as a gateway and provides DHCP.  I do not want to change it's role or settings.  When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet.  As a quick fix as I was working on something else at the time, I just unplugged the E3000.  Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do.  Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all???  By the way...I am located in another state than this router and network.  I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely. 

View 7 Replies View Related

Linksys Wireless Router :: E1000 Changing Internet Service Provider

Sep 3, 2010

If I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?

View 3 Replies View Related

Linksys Wireless Router :: E3000 5Ghz Auto(DFS) Versus Selecting Channel

Nov 15, 2012

I have an E3000 Dual Band. On my 5Ghz channel, I can select Auto(DFS) or I can manually select a channel.First of all, what does the DFS stand for? My 2.4 GhZ channel only has Auto, not Auto(DFS).
 
Second, when I select Auto(DFS), my wireless speed defaults to 144Mbps, and is only a single channel (I can see it in the in SSIDer utility). When I manually select a channel, no matter what channel it is, I get 300mbps and I can see that the signal is two channels (for instance, 36+40). Why Auto(DFS) doesn't automatically select the best channel and fastest speed?

View 2 Replies View Related

Linksys Wireless Router :: WRT54GL Setup Suddenly Not Letting To Change Wi-Fi Channel

Mar 29, 2008

I have a Linksys WRT54GL version 1.1. The firmware is 4.30.11 (European version).In the Basic Wireless Settings I can't change the Wireless Channel. It remains at channel 1, and I simply can't alter it.This is strange, because in earlier firmware versions, I was able to change the channel without any problems at all. I would like to continue to use this firmware version. How can I solve this problem?

View 9 Replies View Related

Linksys Wireless Router :: WRT160NL Changing File Sizes On Data Storage

Feb 27, 2012

I have WRT160NL with Firmware Version: 1.0.02. After 3 days of trying to connect my WD Elements 3TB I succeeded with 2 partitions of 1TB and one of 700 Gb not visible from router. I'm ok with that. The problem now is when I copy my files. I'm trying to create TV Series library for my Apple TV. Everything is working fine except the size of the files. When I'm copying files from PC USB they are corrupted on the network storage and not accessible. When I'm copying one file of size 350 Mb on the Network Storage via WIFI working fine but is saved with size of 2,7 Gb.

View 6 Replies View Related

Linksys Wireless Router :: E1200 Changing Out Ethernet Cables / Checking Connections

Apr 25, 2012

ISP : Charter Communications
Modem : Motorola SURFboard SB6121
Router : Linksys E1200
 
I started out installed on the CD and then I kept getting messages about not being set up and finally it kicked me out. So I started out with the basics, changing out ethernet cables and checking connections. I then tried cycling the modem, router, computer and still no go. As soon as I plug the modem straight back into the computer it kicks back on. So then I tried some other trouble shooting ideas on the forums with the last being MAC address clone, save changes, release renew IP, and finally another round of cycling and I still can't get it to work.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Can't Get Out To Web

Jul 5, 2011

I'm looking to upgrade my WRT54G as I have had NO luck in getting my Galaxy Tab to connect through it so far (can connect and get an IP address but can't get out to the web) and have had intermittent problems with my Blu-ray lately.  I am looking for something with the best affordable range, live 3 floors down from the current one and get about 3/4 signal strength so there's not much interference it seems.  I watch a lot of online content through Hulu, Netflix, and LMB games and share with 2 other people.I am looking at the E series, probably the E1200, 1500 or 1550 as they seem to meet my needs.  Any users have any advice about the ease of install and use of either of these?  Or would it be better to get a gateway as we are considering going from DSL to U-verse service, twice the speed for $2/month more

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved