Linksys Wireless Router :: Browser Cannot Display E3200 Webpage?
Jun 25, 2011
I have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions). 1. My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable. 2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not (I have them named differently). How do I see both wireless connections?
View 9 Replies
ADVERTISEMENT
Jul 3, 2011
We have a NETGEAR router that we have been using for at least a year now which has not given us any problem. I bought a new laptop yesterday and created a new network on it to establish internet connection for it. Now however, the internet is not working on another laptop or the XBOX 360. The older laptop even says it's connected but the the brower pops up, it just says cannot display webpage. I feel like I've tried every strategy that I know of and it still doesn't work.
View 1 Replies
View Related
Aug 25, 2011
There are 2 laptops (Windows XP and Windows Vista), 3 iPhones and a PS3 in my house which all run on WiFi (Linksys) and normally do so without any problems. Well, yesterday I woke up to find that when I looked at my connection status all of these were showing that they had 100% Internet connection but none of them will actually connect. My phone only tells me that it has no connection when I try and open Safari or any other app that uses Internet and my computer says that it Cannot Display Webpage.I have had this problem about 3 1/2 months ago and was able to have it fixed over by calling my Internet service provider and the Linksys customer support.
View 14 Replies
View Related
Feb 28, 2013
I have a 1240Ag. Earlier I loaded a startup config from a backup. The AP came back up - I can SSH into it, but when I try to access the web management page it says "IE cannot load the webpage".
View 3 Replies
View Related
Apr 27, 2012
I have netbook with win xp It is connected wirelessly to modem the internet was working until we upgraded the modem , now i see on the netbook that it is connected to internet but when i open internet page it dispays server not found I tried the answers posted to repair ip or winsock but it didn't work
View 20 Replies
View Related
May 17, 2011
I had some viruses/malware that I was able to kill using skill.com freeware. Ever since, I have had no internet conectivity although signal is excellent. [code]
View 11 Replies
View Related
Jan 13, 2012
I installed a new Media link MWN-WAPR150N router and I can connect two laptops and an i Pad wireless but when I try to access the Internet through a Dell Dimension 4550 desktop which is directly connected to the router, I get the message "Internet Explorer cannot display the webpage." I have tried unplugging the cable modem and router, downloading network drivers, repairing the connection, ip config /release and /renew, etc. and nothing has worked. The connection status shows as connected. I can ping the router successfully, but I can't ping a web site.
View 1 Replies
View Related
Jun 30, 2011
I have a network with a 2003 windows server and around 60 XP computers. I also have 2 different gateways. I am trying to access a webpage "eparts.rmpparts.com". When I enter the address it comes up to the page that says "IE cannot display the webpage".I have treid and both gateways and same result. I am also not able to ping the address from the PC within my LAN.I then went to a different network "not within my LAN" and I am able to access the site without any problem. I have accessed it from my phone also without any problems.I have tried to get to this page from the server and also around 5 other computers within the LAN and the same problem each time.I have security settings very low and also the firewalls are off. I tried on a computer that is connected to my LAN with no luck. I then disconnected that same computer and connected it to a different modem not within the LAN and had no prob getting to the site with the same PC.So I know it must have something to do with my LAN but I have no idea what it could be. I have tried everything I can think of and same result each time.
View 19 Replies
View Related
Nov 9, 2011
I am getting the error message "internet explorer cannot display the webpage", my computer tells me i am connected to my wireless and that internet is available but it will not open any webpages, no matter which browser i try. I have disabled all firewalls and run diagnostics but it just tells me there is a problem with my router, despite the connection being perfect for other devices. My computer is relatively new and i'm sure its not a virus as i have run different anti-virus and malware softwares.
View 10 Replies
View Related
Sep 2, 2011
I cannot access one particular website - one that I regularly use. I have checked with other users - they can access the site.
This has been going on now for about 2-3 weeks and evertime I try to access the site I get the following message: "Internet Explorer cannot display the webpage"
View 14 Replies
View Related
Jan 12, 2013
I'm trying to connect to 192.168.1.1 in order to set up a password. When I type it in, I receive a message, Internet Explorer Cannot Display Webpage. Why can I not connect?
View 1 Replies
View Related
Dec 10, 2011
I have a lap plug into a wired connection and it has stop working, i have ran the windows fix program which didn't work, i plugged a different lap top into the wire and that works fine!
View 5 Replies
View Related
Dec 21, 2011
For the last two weeks or so I keep getting kicked out of websites I have went to on more than one occasion. IE just says cannot display webpage and firefox keeps saying connection timed out. I have been researching this issue through other forms. Here is what I have tried so far to fix this issueReset all cookies, history, etc Renewd IP System Restore I am not running off any proxys Did a full compuer scan and removed all threats/virus' Reset SSL's Uninstalled Windows IE and Firefox and reinstalled Unplugged Router Put cookies/firewall settings to minimun or none and tried to access websitesThere is no specific trend towards the webstites I go to, that I can see at least. One is my bank account and another is a clothing store, little things like that here and there. I can't get on any mozilla websites for tech so I have been googling it through my Android. I even did a diagnostic through windows on a specific website and it said that everything checked out and that it was a web site issue, which I find hard to believe since I can access it through my phone
View 9 Replies
View Related
Feb 5, 2011
I connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows 7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
I went to Tools, Internet Options, LAN Settings, and I checked the First two boxes. Where it says "Address" I put in [URL]then I went back, and went on the Internet but It still says ---"Internet Explorer cannot display the webpage" Then I went back to Tools, Internet Options, and took off [URL]then tried again, then I went back to the Internet but it still said the same thing saying-----"Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" and it ---started detecting the problem.. and when it was finished detecting it said...---"Windows could not automatically detect this network's proxy settings."
You only want "Automatically detect settings" checked. The second check box if for a configuration script or the like to setup IE settings. That is really only used by company's that want specific home pages and other settings set to match their networks.If anything is checking in the "Proxy Server" area, I would uncheck it as you won't go through a proxy since you are connecting to a hotspot. It is pretty rare for public locations to use proxy servers.I connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
View 14 Replies
View Related
Jul 6, 2011
I got new internet installed in my apartment, intending to use the same WAP as I did on the old network. The only thing that changed from the old network to the new is the cable modem, which is identical to the old one. Currently, the WAP does not connect to the internet, although I can connect through an ethernet cable to the modem itself. My theory is that the modem is set to a static gateway, while the WAP is not. To try to fix this, I attempted to access the default gateway at 192.168.2.1. Of course, I couldn't remember the stupid password, so I tried different passwords with no results.
Now when I try to access the same IP, it loads for a few minutes, then says 'cannot display the webpage' and gives an option to diagnose connection problems. I know the internet still works, because I can go to any other page I choose. Diagnosis produces the following: 'Your computer appears to be correctly configured, but the device or resource (192.168.2.1) is not responding' (no error code given). Maybe this is a stupid question, but was there a limit to the number of times I could try a password? Additionally, I can't get to 192.168.2.1 on a different computer, on a different network, either. When I try the ipconfig command, the default gateway line comes up blank.
View 14 Replies
View Related
Jul 27, 2012
Internet Explorer Cannot Display the Webpage ?I'm already logged into certain websites but most of the time or in fact all the time today I'm kicked off and I receive an error "Internet Explorer Cannot Display the Webpage."
View 19 Replies
View Related
Jan 20, 2012
I have a sony vaio VGN-NW20EF running windows 7, It use to work fine but now I can't access the internet wirelessly. It detects and connects to networks wirelessly and it even says I have internet access but the msg cannot display the webpage keeps coming.
It works fine with the ethernet cable. It works fine wirelessly if I use my mobile phone as a hotspot as it's a HTC HD 2 and works as a router on the go, through the phone's internet. I've restored the computer to the earliest date available and no luck.
View 1 Replies
View Related
May 21, 2012
I am using CISCO ASA 5505. Client PC with Windows XP can use IE to make the VPN connection normally.However, client PC with Windows 7 cannot use IE to make the VPN connection.It just show the error of "Internet Explorer cannot display the webpage"
View 4 Replies
View Related
Jun 1, 2012
I have a wireless network (cable modem and router) set up in my home, which all of my devices are able to connect to the internet just fine, all but two; one is a netbook and the other is a desktop. The netbook has a wireless card built in, and the desktop has usb wireless card. Both of devices are running xp (both are the only compters in my home ran on xp), and these are the only two devices that will not connect to the internet wirelessly, except for when the wireless is unsecure these two devices connect fine, but once I enable a password these two devices say connected with an excellent signal strength, but once I open up the brower no web page comes up (just a message saying server not found). These two computers are able to install automatic program updates from over the internet, but still no web page will come up.
View 3 Replies
View Related
Mar 20, 2013
We have a ACE 4710 with a basic config, When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a java script file.
We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working. We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address. [code]
View 15 Replies
View Related
Feb 27, 2011
I suddenly can't connect to the internet using IE or Firefox every time I try I get the message "Internet Explorer cannot display the webpage". My connection on my wireless picks up great and shows signal strength as excellent. I took it to a place that was offering free check ups and they said that I caught a virus which I never seen any sign of catching a virus when it worked and that it had wiped out one of my hard drives and they could fix it for $229.00. I don't have that kind of money so I don't know what to do.
View 1 Replies
View Related
Feb 15, 2013
I am a powerbook G4 user, Mac's wireless is good so far.OSX 10.4.11 and when I am using E1000 extender, often the admin page shows up automatically like 192.168.1.1 and asks me to log in and once I log into the admin page, of corse show up the admin page.So, all my other internet pages are gone every time.Only shows the admin page.It does not happen with windows PCs.
View 1 Replies
View Related
Apr 20, 2012
Every time I try to connect to the admin page of my router, I get "The connection to the server was reset while the page was loading." This happens with FIrefox 11, and started when I upgraded to 8 or 9. A machine running FF 3.6 does not exhibit this problem; I get right in. What IE 9 says is "Internet Explorer cannot display the webpage" (after complaining about the expired certificate).
I ran Wireshark to see if I could learn anything, but all I could figure out was this: https handshake was OK. First TLS packet is received by router, which then immediately issues a reset and ends the connection. I don't know why.
have I got a screwed up configuration (or router)?
View 5 Replies
View Related
Jun 17, 2012
I trying to portforward on my WRT54G2 router but can't access webpage because I don't know the username or password. Is there any way to find out the password and username
View 1 Replies
View Related
Apr 18, 2013
WRT120N router: After several hours on the phone with Technical support I got nowhere. Guy had me putting in "admin" in the user name then the PW. I kept getting the 401 authorization required message. After all that I reset my router and used the disk to setup again. After that I went again to the 192.168.1.1 and got the request for authorization, entered admin in the PW and it does nothing, just reloads the request and browser keeps connecting. I have WIN 7 HP, use Firefox 5.0 mostly, but tried on IE8 as well and it does the same thing. I am attempting to open a port.
View 4 Replies
View Related
Mar 6, 2008
I own a wireless WRT54G, which has worked fine in the past. After setting up a new wireless network, I went to the router webpage to open some ports. The problem with the page loading is that it doesn't display correctly. No clickable text is displayed on the top of the page or the side bar, so I basically can't do anything whatsoever to configure it. I've tried loading it up in both Firefox and Internet Explorer, with IE saying the page loaded but with errors.
View 5 Replies
View Related
Mar 5, 2013
I'm having some difficulty getting into the settings web page on my e4200 router while the modem is running. I can access it soon as the modem is turned off. Additionally I downloaded the Android cisco express connect app for my tablet which does allow me to access the router while the modem is switched on.
View 5 Replies
View Related
Feb 28, 2013
I have a continuing problem with my WRT54G2 wireless router. I set up my network, changing the password for the router, and I change the SSID, as well as the encryption password. When I set it up, and after changing passwords etc. I always log off, go back and log on, and it works fine. Once I set up the network, over time, I'll notice a device will no longer connect via wireless. When that happens, I try to log on to the router, and can not connect to the router using either Firefox or IE. When I try, I get Internal Server Error, or just nothing. I can ping the router, and if I run an IPCONFIG at this point, the default gateway does show 192.168.1.1. Every time this starts to happen, I must do a hard reset of the router. Once I do this, I can connect, and log on using the default settings, and re-set everything. This is a HUGE pain, as it takes a lot of time, and happens way too often.
View 2 Replies
View Related
Jul 15, 2011
WRT120N router: After several hours on the phone with Technical support I got nowhere. Guy had me putting in "admin" in the user name then the PW. I kept getting the 401 authorization required message. I reset my router and used the disk to setup again. After that I went again to the 192.168.1.1 and got the request for authorization, entered admin in the PW and it does nothing, just reloads the request and browser keeps connecting. I have WIN 7 HP, use Firefox 5.0 mostly, but tried on IE8 as well and it does the same thing. I am attempting to open a port. Also the support site has been down for over 13 hours for routine maintenance service.
View 2 Replies
View Related
Nov 24, 2011
is there a way to display the active wireless connections?
View 2 Replies
View Related
Sep 9, 2012
I installed dd-wrt latest for this router but it wont show any connections to the ports. I can connect to the router with my internet port connected to the computer but that is it. I tried connecting the modem to a port connection and it showed connected. I'm confused as the firmware loaded fine. May be I went over my abilities which is usually the case.
View 1 Replies
View Related
May 23, 2011
I picked up an E1200 and set it up successfully. I am using wireless MAC filtering, and decided to pull up the list of connected wireless clients (Wireless >> Wireless MAC Filter >> push "Wireless Client List" button).Immediately after this the Web UI of the E1200 becomes inaccessible. It still routes traffic, and the router remains pingable, but it will not allow access to the Web UI for several minutes. The error that appears upon attempt to access the Web UI during this time window is similar to the above, but reads "Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection."
I have tried this in Google Chrome, Firefox 4, and MSIE on two separate computers. Each browser displays the error a bit differently (MSIE, for example, just says it can't display the page and gives no further detail) but the net results are always the same. I have tried resetting the device to factory defaults in addition to re-downloading the firmware from the Cisco/Linksys website and installing it. No improvement.
I have also noted that the Log (Administration >> Log; and yes, I have it enabled) doesn't appear to be picking up anything at all. In fact, the Security log, which supposedly (according to the Help) "displays the login information for the Router’s browser-based utility," is also blank.
View 9 Replies
View Related
Jul 16, 2011
I have a E4200 setup for 2.4 & 5G running the latest firmware. When I connect to the router wireless 192.168.1.1 and log in, it takes a few seconds for the web interface to display. Same happens when switching to the different config tabs. Is there any reason for this? I would think it would be immediate but it takes anywhere from 3-5 seconds for IE9 to respond.
View 2 Replies
View Related
