I had some viruses/malware that I was able to kill using skill.com freeware. Ever since, I have had no internet conectivity although signal is excellent. [code]
View 11 RepliesI am getting the error message "internet explorer cannot display the webpage", my computer tells me i am connected to my wireless and that internet is available but it will not open any webpages, no matter which browser i try. I have disabled all firewalls and run diagnostics but it just tells me there is a problem with my router, despite the connection being perfect for other devices. My computer is relatively new and i'm sure its not a virus as i have run different anti-virus and malware softwares.
View 10 Replies View RelatedI cannot access one particular website - one that I regularly use. I have checked with other users - they can access the site.
This has been going on now for about 2-3 weeks and evertime I try to access the site I get the following message: "Internet Explorer cannot display the webpage"
I have a lap plug into a wired connection and it has stop working, i have ran the windows fix program which didn't work, i plugged a different lap top into the wire and that works fine!
View 5 Replies View RelatedI connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows 7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
I went to Tools, Internet Options, LAN Settings, and I checked the First two boxes. Where it says "Address" I put in [URL]then I went back, and went on the Internet but It still says ---"Internet Explorer cannot display the webpage" Then I went back to Tools, Internet Options, and took off [URL]then tried again, then I went back to the Internet but it still said the same thing saying-----"Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" and it ---started detecting the problem.. and when it was finished detecting it said...---"Windows could not automatically detect this network's proxy settings."
You only want "Automatically detect settings" checked. The second check box if for a configuration script or the like to setup IE settings. That is really only used by company's that want specific home pages and other settings set to match their networks.If anything is checking in the "Proxy Server" area, I would uncheck it as you won't go through a proxy since you are connecting to a hotspot. It is pretty rare for public locations to use proxy servers.I connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
Internet Explorer Cannot Display the Webpage ?I'm already logged into certain websites but most of the time or in fact all the time today I'm kicked off and I receive an error "Internet Explorer Cannot Display the Webpage."
View 19 Replies View RelatedI am using CISCO ASA 5505. Client PC with Windows XP can use IE to make the VPN connection normally.However, client PC with Windows 7 cannot use IE to make the VPN connection.It just show the error of "Internet Explorer cannot display the webpage"
View 4 Replies View RelatedWe have a ACE 4710 with a basic config, When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a java script file.
We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working. We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address. [code]
I installed a new Media link MWN-WAPR150N router and I can connect two laptops and an i Pad wireless but when I try to access the Internet through a Dell Dimension 4550 desktop which is directly connected to the router, I get the message "Internet Explorer cannot display the webpage." I have tried unplugging the cable modem and router, downloading network drivers, repairing the connection, ip config /release and /renew, etc. and nothing has worked. The connection status shows as connected. I can ping the router successfully, but I can't ping a web site.
View 1 Replies View RelatedI suddenly can't connect to the internet using IE or Firefox every time I try I get the message "Internet Explorer cannot display the webpage". My connection on my wireless picks up great and shows signal strength as excellent. I took it to a place that was offering free check ups and they said that I caught a virus which I never seen any sign of catching a virus when it worked and that it had wiped out one of my hard drives and they could fix it for $229.00. I don't have that kind of money so I don't know what to do.
View 1 Replies View RelatedThere are 2 laptops (Windows XP and Windows Vista), 3 iPhones and a PS3 in my house which all run on WiFi (Linksys) and normally do so without any problems. Well, yesterday I woke up to find that when I looked at my connection status all of these were showing that they had 100% Internet connection but none of them will actually connect. My phone only tells me that it has no connection when I try and open Safari or any other app that uses Internet and my computer says that it Cannot Display Webpage.I have had this problem about 3 1/2 months ago and was able to have it fixed over by calling my Internet service provider and the Linksys customer support.
View 14 Replies View RelatedI am using a desktop PC with a wireless USB stick attached in order to connect to the internet via a wireless router, however, although it states that I am connected with excellent signal strength, it continues to show a warning sign over the wireless connection signal bars ON THE DESKTOP TRAY ONLY. I can't surf the web on my desktop or on my IPAD through the wireless connection in which both devices detect. I have a Sitecom wireless router.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) D CPU 2.66GHz, Intel64 Family 15 Model 4 Stepping 7
[Code].....
I have an intermittent problem with one of my PCs on my wireless home network. While I always have excellent signal strength, most of the time I can not connect to the internet. All the other computers on my wireless network work fine and I can always connect to my neighbors wireless network to get internet access with the problem PC(A dell latitude E6410 with windows 7). When I have no internet access on my network and I run some diagnostics it says that my default gateway is not available.
View 1 Replies View RelatedI have netbook with win xp It is connected wirelessly to modem the internet was working until we upgraded the modem , now i see on the netbook that it is connected to internet but when i open internet page it dispays server not found I tried the answers posted to repair ip or winsock but it didn't work
View 20 Replies View RelatedOn my asus laptop, wireless does not work. It works when connected with ethernet cable. Signal show wireless strength excellent but it does not work wireless.
View 2 Replies View RelatedI received a new hp laptop from a friend with a cisco linksys e1000 router. The first time I hooked it up it got online and worked great. I downloaded some updates for windows and restated the laptop for them to take effect and now it won't get back online for anything. I even restored the computer to the previous settings. All I get is the error message "Internet Explorer can not display the web page. I am running windows 7 ultimate.
View 3 Replies View RelatedI'm trying to connect to 192.168.1.1 in order to set up a password. When I type it in, I receive a message, Internet Explorer Cannot Display Webpage. Why can I not connect?
View 1 Replies View RelatedLaptop connected to internet but internet explorer cannot display webpages
View 1 Replies View Relatedlaptop gets exellent signal from router but no internet connection
View 4 Replies View RelatedMy signal strength shows Excellent but my internet connection comes & goes all of a sudden.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Users ebako>IPCONFIG /ALL
[Code].....
I have a sony vaio VGN-NW20EF running windows 7, It use to work fine but now I can't access the internet wirelessly. It detects and connects to networks wirelessly and it even says I have internet access but the msg cannot display the webpage keeps coming.
It works fine with the ethernet cable. It works fine wirelessly if I use my mobile phone as a hotspot as it's a HTC HD 2 and works as a router on the go, through the phone's internet. I've restored the computer to the earliest date available and no luck.
I have a linksys router,I reset it and hooked it up,but I don't get internet even though the signal is excellent
View 1 Replies View RelatedI have a 1240Ag. Earlier I loaded a startup config from a backup. The AP came back up - I can SSH into it, but when I try to access the web management page it says "IE cannot load the webpage".
View 3 Replies View RelatedI have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions). 1. My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable. 2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not (I have them named differently). How do I see both wireless connections?
View 9 Replies View RelatedI have a network with a 2003 windows server and around 60 XP computers. I also have 2 different gateways. I am trying to access a webpage "eparts.rmpparts.com". When I enter the address it comes up to the page that says "IE cannot display the webpage".I have treid and both gateways and same result. I am also not able to ping the address from the PC within my LAN.I then went to a different network "not within my LAN" and I am able to access the site without any problem. I have accessed it from my phone also without any problems.I have tried to get to this page from the server and also around 5 other computers within the LAN and the same problem each time.I have security settings very low and also the firewalls are off. I tried on a computer that is connected to my LAN with no luck. I then disconnected that same computer and connected it to a different modem not within the LAN and had no prob getting to the site with the same PC.So I know it must have something to do with my LAN but I have no idea what it could be. I have tried everything I can think of and same result each time.
View 19 Replies View RelatedFor the last two weeks or so I keep getting kicked out of websites I have went to on more than one occasion. IE just says cannot display webpage and firefox keeps saying connection timed out. I have been researching this issue through other forms. Here is what I have tried so far to fix this issueReset all cookies, history, etc Renewd IP System Restore I am not running off any proxys Did a full compuer scan and removed all threats/virus' Reset SSL's Uninstalled Windows IE and Firefox and reinstalled Unplugged Router Put cookies/firewall settings to minimun or none and tried to access websitesThere is no specific trend towards the webstites I go to, that I can see at least. One is my bank account and another is a clothing store, little things like that here and there. I can't get on any mozilla websites for tech so I have been googling it through my Android. I even did a diagnostic through windows on a specific website and it said that everything checked out and that it was a web site issue, which I find hard to believe since I can access it through my phone
View 9 Replies View RelatedI got new internet installed in my apartment, intending to use the same WAP as I did on the old network. The only thing that changed from the old network to the new is the cable modem, which is identical to the old one. Currently, the WAP does not connect to the internet, although I can connect through an ethernet cable to the modem itself. My theory is that the modem is set to a static gateway, while the WAP is not. To try to fix this, I attempted to access the default gateway at 192.168.2.1. Of course, I couldn't remember the stupid password, so I tried different passwords with no results.
Now when I try to access the same IP, it loads for a few minutes, then says 'cannot display the webpage' and gives an option to diagnose connection problems. I know the internet still works, because I can go to any other page I choose. Diagnosis produces the following: 'Your computer appears to be correctly configured, but the device or resource (192.168.2.1) is not responding' (no error code given). Maybe this is a stupid question, but was there a limit to the number of times I could try a password? Additionally, I can't get to 192.168.2.1 on a different computer, on a different network, either. When I try the ipconfig command, the default gateway line comes up blank.
How can I have "excellent" Signal Strength and "limited or no conductivity" at the same time?
View 1 Replies View RelatedWe have a NETGEAR router that we have been using for at least a year now which has not given us any problem. I bought a new laptop yesterday and created a new network on it to establish internet connection for it. Now however, the internet is not working on another laptop or the XBOX 360. The older laptop even says it's connected but the the brower pops up, it just says cannot display webpage. I feel like I've tried every strategy that I know of and it still doesn't work.
View 1 Replies View RelatedI have several E4200 routers deployed in our library district. In one branch, we have been having sporadic problems with computers not being able to maintain a connection. Typically the computer will connect and then the connection will drop and Windows will display the yellow error triangle on the wifi signal strength display.I have swapped the router with another brand new E4200 with the latest firmware but am still having this problem.
View 6 Replies View RelatedWe have a D-Link DI-524 wireless router that has had no problems until today. Our laptops (with Windows XP), iPods, and iPhones all show that there is an excellent wireless network connection (as usual), but none of the computers or devices will connect to the Internet. I tried resetting, rebooting, and unplugging the modem and router. The router and modem seem to be fine. When we disconnect the router and plug the laptop directly into modem, we have Internet connection (i.e., it's not the IP).
View 4 Replies View RelatedI'm having a little trouble connecting a new computer to my wireless network. I have a WRT400N router and I'm connecting an older computer to it. The computer runs off Windows XP and the router itself is a WUS854G. We can get the adapter to say that it is connected to the network, but the router will not assign it a new IP address or even acknowledge that it is connected on the MAC client list. We manually forced a new IP, which allowed the computer to connect (though, again, the router did not show that it had been connected to.) but despite the connection being "Excellent" we could not access the internet. Furthermore when we tried to refresh the connection the IP address reverted to the original setting.
View 2 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6057 Mb
Graphics Card: Intel(R) HD Graphics Family, -1259 Mb
Hard Drives: C: Total - 278527 MB, Free - 107426 MB; D: Total - 416451 MB, Free - 358397 MB;
Motherboard: SAMSUNG ELECTRONICS CO., LTD., 300E4A/300E5A/300E7A
Antivirus: AVG Anti-Virus Free Edition 2013, Updated and Enabled
My laptop refuses to access the internet though the WiFi signal is strong (my Android phone connects instantly). I am currently in a hotel so cannot mess with the router (as advised by Windows help!). I have a similar problem in one airport lounge but generally it's fine, and at home I have no problem at all. It will connect for a while but them loses it and it stays lost for ages.
ipconfig:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Mick-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No[code].......