No Internet Access Through Wifi With Excellent Strength?
Mar 5, 2013
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 6057 Mb
Graphics Card: Intel(R) HD Graphics Family, -1259 Mb
Hard Drives: C: Total - 278527 MB, Free - 107426 MB; D: Total - 416451 MB, Free - 358397 MB;
Motherboard: SAMSUNG ELECTRONICS CO., LTD., 300E4A/300E5A/300E7A
Antivirus: AVG Anti-Virus Free Edition 2013, Updated and Enabled
My laptop refuses to access the internet though the WiFi signal is strong (my Android phone connects instantly). I am currently in a hotel so cannot mess with the router (as advised by Windows help!). I have a similar problem in one airport lounge but generally it's fine, and at home I have no problem at all. It will connect for a while but them loses it and it stays lost for ages.
I have an intermittent problem with one of my PCs on my wireless home network. While I always have excellent signal strength, most of the time I can not connect to the internet. All the other computers on my wireless network work fine and I can always connect to my neighbors wireless network to get internet access with the problem PC(A dell latitude E6410 with windows 7). When I have no internet access on my network and I run some diagnostics it says that my default gateway is not available.
I am using a desktop PC with a wireless USB stick attached in order to connect to the internet via a wireless router, however, although it states that I am connected with excellent signal strength, it continues to show a warning sign over the wireless connection signal bars ON THE DESKTOP TRAY ONLY. I can't surf the web on my desktop or on my IPAD through the wireless connection in which both devices detect. I have a Sitecom wireless router.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit Processor: Intel(R) Pentium(R) D CPU 2.66GHz, Intel64 Family 15 Model 4 Stepping 7
On my asus laptop, wireless does not work. It works when connected with ethernet cable. Signal show wireless strength excellent but it does not work wireless.
We have a D-Link DI-524 wireless router that has had no problems until today. Our laptops (with Windows XP), iPods, and iPhones all show that there is an excellent wireless network connection (as usual), but none of the computers or devices will connect to the Internet. I tried resetting, rebooting, and unplugging the modem and router. The router and modem seem to be fine. When we disconnect the router and plug the laptop directly into modem, we have Internet connection (i.e., it's not the IP).
I'm having a little trouble connecting a new computer to my wireless network. I have a WRT400N router and I'm connecting an older computer to it. The computer runs off Windows XP and the router itself is a WUS854G. We can get the adapter to say that it is connected to the network, but the router will not assign it a new IP address or even acknowledge that it is connected on the MAC client list. We manually forced a new IP, which allowed the computer to connect (though, again, the router did not show that it had been connected to.) but despite the connection being "Excellent" we could not access the internet. Furthermore when we tried to refresh the connection the IP address reverted to the original setting.
I just received a brand new HP Pavilion dv7 Notebook PC. When I try to connect to my internet, it connects, but attempts to "identify" the connection for about 10 seconds then it says "Undentified network" and fails to have internet access. 2 other computers are connected to this network with no problem. I've tried resetting everything, and many other "fixes" for this exact problem from other forums. I even uninstalled Norton, but nothing seems to work.I can connect directly to mine, and wirelessly with my neighbors, so I know the network card is okay.Here is my information when I type ipconfig /all into cmd.
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersStephen>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Stephen-HP Primary Dns Suffix . . . . . . . :
I had some viruses/malware that I was able to kill using skill.com freeware. Ever since, I have had no internet conectivity although signal is excellent. [code]
I have computers scattered across our home, and in many areas it is not feasible to run ethernet cable. At one location (less than 30 feet away) but through multiple walls, I can barely connect to any POS (I have two). I added a stand alone antenna extension with long antennas on both the router and the WiFi card on the PC, however, this made zero improvement.What should I be looking to purchase to increase the signal strength? I've already tried different routers.
We had our network set up using a Cisco wrt310n router and it was working greatThen suddenly we started having connection issues with anything wireless. There are 2 PS3's, 2 laptops, and 1 iPhone, 2 desktops but they are always plugged in and never skip a beat. When plugged in(where applicable) everything works just fine. So I changed the router to a D-Link wbr-2310. Network worked for a few days, but the wireless connection was a bit slow. Then it suddenly dropped wi-fi alltogether.
I updated drivers, updated firmware. And then the D-link stopped working even when wired, but thats a story for another time. So I plugged the Cisco back in, network up again. Worked for a few days and now I cannot connect wirelessly. I have my laptop in the same room as the router, it lists signal strength at full but says "did not receive any response from wireless router" and gives me a link to trouble shoot low signal... I have tried a lot of different tricks and settings and nothing has worked at all.
I have also noticed there are a lot of wireless networks in my area, I live in a townhouse complex. Each unit is seperated by a double garage, and backyard space. Last night I was detecting 11 networks. I tried using a different channel but no results.This isnt just an issue with one device, its every device I try and connect wirelessly, and with different routers.
The signal strength usually shows low or very low. I`ve been changing the channels through 1,6,11, but it doesn`t change the signal strength. My modem is a Netgear CGD24N v2. The computer operates ok but i`d like the signal strength to show better than low.
My enquiry is about a brand new Belkin N150 F6D4050ed that i bought last week.I had to buy it because my previous Wifi Dongle just stopped working all together, it was an excellent dongle, gave me full signal strength and never cut out.Then i bought the Belkin.. I installed the drivers, plugged it in, since then, i have had 2-3 bars constantly, mostly 2 bars, The router is only 8-10 Feet away from me in the next room which is seperated by a very thin wall, It cuts off all together if a body stands in front of it, such as my brother coming in to chat. I have tried to move it around the room with no joy, All laptops and other wireless devices in the house connect to the router fine (Including downstairs in the garden even),Im a gamer, so i need a stable strong connection and its impossible to stay in games with this dongle.
Is there any way that I can boost the WiFi signal on my laptop? It is a HP Pavilion dv7, originally had Windows Vista x64, but I wiped the HD and installed Windows 7 Ultimate x64 and went to the HP website to get ALL of the drivers that I needed for this specific laptop.
Even though I put high gain antennas on my routers which extended the range of good signal immensely, I wish to try to get even better signal strength also. When using manual configuration mode on the router, I have set the WiFi power level to 100% (default level). Is there a way to increase that level beyond 100% and "overdrive" the signal? I tried to input a number >100% and that was not accepted.
I know this is possible if I go to dd-wrt, and possibly with open-wrt, which I prefer not to do for various reasons, not the least of which is that I have both a Rev. A1 and a Rev. B1 router (Rev. A1 is not supposed to support dd-wrt). I also know that increasing the power will make the router run hotter. I am willing to risk it as I monitor the temperature regularly.
Has anyone ever tried to do this or, have the people who want this just gone to dd-wrt? From the dd-wrt forum it appears that the DIR-825 router in Rev. B1 is not very user friendly to dd-wrt. After 3 years the code is still flaky. I would prefer not to use it, if possible.
I use a Linksys WRT54GR router. I recently bought an iPad, and I generally use it in a room that is on the other side of the house and through many walls. When it works, it works nice. But recently, my signal has been weak, and is often dropped. Pages load slowly, or not at all after getting a could not connect to server or whatever message. However, this isnt a huge problem for my laptops when used in this room. I dont believe it is the iPad that is faulty because my iTouch also experiences difficulty sometimes. I need a way to increase the signal strength for a longer distance. I looked at a repeater, but im not quite sure what it is and how to set one up, or where to buy one.
I am using Dell Inspiron 1525, 2008 model with a 1395 WiFi Mini card. The signal strength I get is very low, whereas people in the same location get good strength with other laptops like Sony etc.Is there any way of improving the signal strength without disturbing the router/modem, like some software/ hardware changes in the Laptop. Dell havent answered yet.
I have Virgin Media XXL broadband in the UK. I have Avast antivirus. Windows firewall is enabled and all security updates are up to date. I have a 50mbit virgin fiber optic broadband which is working fine on my flatmate's pc's. While making sure the internet wasn't being used my speedtest still returned around 1mbit with full signal strength. I have run speedtest on 3 pc's at the same time and 2 of them were over 30mbit while mine was still barely 1mbit. I am using an Edimax EW-7811Un nano usb adapter. From reviews I read that it should work great with Virgin. But for some reason it doesn't work well despite the full signal strength.
I have connected my DIR-825 to my cable modem through the network ports and completed the configuration. Everything works fine, I am able to connect through wireless to the DIR-825 and access the internet. I had to do this as my cable modem is also wireless and does not allow another router to be connected through the internet connection, but I want to get a better signal stength than the cable modem.When I am not wireless connected, I can see the two bands at full strength in the view available wireless networks screen. As soon as I connect to either the 2.4 channel or the 5 channel, the signal strenth of the channel I'm connected to drops to horrible, while the non-connected one still shows at full strength.i tried disabling one of the channels, but as soon as I connect to the other, that channels signal strength still drops to horrible.
I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
I'm trying to use the WET610N as a sort of access point/range extender for a single device, a remote monitoring system installed in a barn. It records temperature, power use, etc, and reports it to the internet. The barn is about 250 feet from the house where the wireless router is installed. There will be very little data flowing over the link.Setup on the WET610N went fine, and it saw the remote router at 10% strength and connected to it fine. However, when I attempt to get Status, the screen shows the headings on the left and no data on the right. Attempting to access the internet through the link on my MacBook Pro failed.
I have a WAP54G and the signal strength and range is not that great; unit manufactured in 04/2007. I have firmware version 3.04 dated Oct 31, 2005. Customer support is suggesting I upgrade the firmware to 3.04.03 but I am sure it will really do anything to the signal strength and range. Also, they suggested I download new drivers for my desktop wireless card.
I would have liked to post on .html as I have a similar problem. My laptop allows me to connect to the wifi, but does not allow me to connect to the internet(can use ethernet but not wireless).[CODE]
I just bought a Galaxy tab and I can't access the wi-fi internet because I made my modem secure with a password 2 years ago and now I forgot the password.
I have 3 laptops in the house, 2 of them can get online, mine CANNOT.It says it has excellent signal strength but has the exclamation point symbol over it and troubleshooting isnt' doing anything.I was using it the other day and then all of a sudden it just stopped?
I just installed WiFi at my house. I can connect on my smartphone and by ethernet cable and the Internet works great. I can also connect to the WiFi on my laptop, but the Internet does not work. My homepage will come up but I can't go to any other sites. My computer does not have this problem with any other WiFi networks.Based on what I've read, here's some quick info that might be useful:
1) HP Pavilion laptop 2) Windows 7 3) I have Norton Internet Security
I also did the ipconfig /all command and here are the results (I don't know how to interpret them):
Experiencing intermittent problem with access to home wifi for one PC (win 7) in the house (2 other PC's access internet OK via same wifi) Dell Studio one - details below - 50% of time will connect if we reset router or re-start PC or try again the next day.[CODE]
I had bought three modems but when i connect them through wifi they are connected but shows no internet acess.so i am using bsnl brdbnd through wire.but iwant to connect through netgear DGN1000. WIFI
