Linksys Wireless Router :: WRT160N V3 - Cannot Connect To Setup Webpage
Apr 20, 2012
Every time I try to connect to the admin page of my router, I get "The connection to the server was reset while the page was loading." This happens with FIrefox 11, and started when I upgraded to 8 or 9. A machine running FF 3.6 does not exhibit this problem; I get right in. What IE 9 says is "Internet Explorer cannot display the webpage" (after complaining about the expired certificate).
I ran Wireshark to see if I could learn anything, but all I could figure out was this: https handshake was OK. First TLS packet is received by router, which then immediately issues a reset and ends the connection. I don't know why.
have I got a screwed up configuration (or router)?
View 5 Replies
ADVERTISEMENT
Jan 27, 2011
I cannot get into my Linksys WRT160N router web page. I'm hardwire connected to the router. My computer is using DHCP IP addressing. The router has assigned it the standard 198.169.1.100. I can ping the router at 192.168.1.1. Wireless and Wired connections through the router to the internet are OK, no trouble accessing internet sites. Linksys advisor displays the router address as 192.168.1.1, so it has not been changed from the factory default. The advisor shows my networked devices clear back to the internet and claims there are no problems. After entering 192.168.1.1 into IE, IE appears to connect and is waiting for the router to respond. After a few minutes, it times out with failure to connect message. I've tried Safe mode with internet access, I've temporarily disabled my Windows and McAfee Firewalls, and the McAfee virus scanner. All to no avail.
View 22 Replies
View Related
Jul 30, 2011
How do I setup a WRT160N as a wireless adapter to connect a wireless printer to my network? I do not use the wrt 160 as a router because I have an AT&T router for u-verse connection. Also, I physically cannot wire the printer to the main router (opposite corners of the house).
View 2 Replies
View Related
Feb 26, 2013
for the past couple of hours i've been trying to setup my router (Linksys WRT160N).When i set up all the cables, like it is in this picture:
[URL]....
View 1 Replies
View Related
Apr 6, 2010
I'm trying to setup a DVR camera system and two web page server boxes behind a Linksys WRT54GL. The problem I have is that all of the devices want to use port 80 to generate the web page. Individually, I can get the boxes to work, but when I try to put it all together everything seems to fall apart. I've got to the DVR set to External port 80, Internal Port 80 IP address 192.168.1.254. The web page server box I try to set to External port 8001, Internal port 80, IP address 192.168.1.200, when I try to save this setting I get the error message Internet IP address and LAN IP address are in the same subnet. If I change the web page server settings to External port 8001, Internal port 8001, IP address 192.168.1.200, it will save the settings, but it won't work that way because it won't actually generate a web page when I try to access that port.The error message doesn't seem to make since as all I'm changing is the port number, not the IP address or subnet mask.
View 9 Replies
View Related
Jul 26, 2012
setup cd won't get past 25% and says not connected to the int! but yes i am .Also tryin to bridge with ATT PACE 4100n crapp!
View 2 Replies
View Related
Oct 16, 2012
I have updated the WRT160n firmware and, since then, I couldn't access the setup page anymore. I could still use the router as a switch, but couldn't access the setup page and configure it as a router.
View 5 Replies
View Related
Aug 7, 2011
I was having problems with the speed being between 30-58 kpbs when going through the WRT160N router, whether its hooked up wired or wireless, the speed with both was extremely slow and wouldnt fully open pager or would take dsl day slow. I hooked up straight to modem and I got 100+ kpbs so I figured its not my ISP, so I read that upgrading my firmware might make it faster, so I upgraded and hit and held the reset button for 30 secs like it recommended but now the 192.168.1.1 wont open, I get a message saying it cant open this page
View 4 Replies
View Related
Dec 22, 2012
Cannot connect to Linksys Router 192.168.1.1 Webpage.
View 1 Replies
View Related
Dec 6, 2012
Cannot connect to Linksys Router 192.168.1.1 WebPage
View 2 Replies
View Related
Oct 30, 2012
l cannot connect to router 192.168.1.1 using my notebook
View 1 Replies
View Related
Aug 3, 2012
I'm having an issue getting my tv to start connecting again to the wireless router.Have tried pin setup (timed out & didn't connect...attempted at least 10 times in this fashion)Have tried entering the password (router seems to refuse the connection to the tv)About a month ago, I was in the Network Magic Map & it looked like one of the laptops had been cloned, so I removed it from the network.
View 3 Replies
View Related
Feb 23, 2012
How do I connect IPAD to Linksys router WRT160n?
View 2 Replies
View Related
May 31, 2008
I have two computers on hard line and two laptops. All computers on the line work fine and flawlessly. But when I try to connect the laptops to the computer, they say there's a problem with the certificate. Both detect the connection, and with strong enough signal strength. I've tried WPA and WEP encryption methods, and disabling encryption methods. All had no change. I believe the problem lies with this Wi-Fi Protected Setup stuff, which I have no clue as to what the hell it's supposed to do. I've tried disabling it by turning it to manual, which all computers then lose internet connection entirely. Browsing the FAQ's, I havn't found a solution. I've been working on this thing for a solid 7 and a half hours straight, and phone support is trying to make me configure static IPs, which proved extremely inconvenient in the past.
View 9 Replies
View Related
Dec 2, 2009
I just bought a Linksys WRT160N router. I pop the installation disk in my mac book pro and walk thru the installation procedure successfully.But I can't connect wirelessly from my MacBook Pro (running mac os x 10.5).It sees the router and I did type in the password correctly (i copy from the text file generated by the installation procedure), but I keep getting 'coonnection timeout'.
View 9 Replies
View Related
Nov 16, 2011
I need to go two ways in my house to improve the wireless signal. Do I just run ethernet cable from the router to the access points? Do i then setup each AP?
View 1 Replies
View Related
Aug 11, 2011
I have" a WRT160N but I guess we had a power outage while I was on vacation and now I can't connect to my old network I set up.I see the Linksys internet connection and I can connect but its not the password protected one I set up. When I go to "manage connection" I can see the old "house" connection but can't connect
View 4 Replies
View Related
Aug 14, 2011
I've been using a WRT160N for a couple of years now with no problems with any of my devices. I have a couple of certain devices (a DS and a PSP mainly) that utilize 802.11b and have been working perfectly up until now.
All of a sudden it seems like the router has decided all by itself to no longer allow 802.11b devices to connect to it, despite it being configured in mixed mode. (b/g/N) I've tried tinkering around with it, switching between Mixed and BG-Mixed, changing the channel to something more common and restarting the router, but I can't connect at all on these devices.Model: Cisco Linksys WRT160N v3.Firmware version: 3.0.03.
View 1 Replies
View Related
Nov 3, 2011
I cant get my laptop to connect to my wrt160n v3 router when wireless N is enabled my laptop supports b/g/n wireless.
View 5 Replies
View Related
Nov 16, 2011
I have a hard wired connection thought my cable modem, but can not get it thought my WRT160N v2
View 2 Replies
View Related
Jan 13, 2013
Windows 7 laptop does not connect to Wiress router WRT160N. It used to connect automatically for years when laptop is booted.Now Windows troubleshooting gives message to reboot wireless router. It connects automatically when the wireless is rebooted. This issue occues when the router is ON for long time ~ 12 hours or more.
View 1 Replies
View Related
Dec 11, 2011
I've been searching and searching the internet and I have never found a CERTAIN answer for if the linksys wrt160n v3 router will work for the ps3 or not. I want to know for sure if it will work because I know that is it sbackwords compatible with g/b/a networks but I am a newby at this stuff.
View 2 Replies
View Related
Mar 25, 2012
Purchased today 26th March 2012, used CD first as warned, followed procedures, will not connect to WAG 160N modem router. WAG160N has MAC restrictions but MAC of WRT160N added, both in wireless and as a computer. Still won´t connect, gets to 85% in wireless connect mode then fails, gets to stage 4 of router recognition and fails, saying check cables. Cables changed to know working ones, still no success. Tried pinging 192.168.1.1 direct from computer with no success, no access to router log-in page at all. WAG 160N has no problems.
View 2 Replies
View Related
Jun 24, 2012
This was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away.I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point.
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again.
View 2 Replies
View Related
Dec 12, 2012
I am unable to connect my Ipad3 to my home network (WRT160N router). It has been working for the last 8 months, and stopped working after I installed Direct TV App on Ipad..It detects the network, but not accepts the PW.... I have multiple wireless devicess connected to my network without any problems..The funny thing is that my neighbor brings his ipad to my house and he is able to connect..My ipad connects to any other network...just not my home network.. I contacted Apple who spend hours with me on the phone and suggested doing a full reset on the ipad, but still did not solve the problem..I called and already paid for linksys support ($62.95) who spend hours with me on the phone, but suggesting: "maybe you need to buy another router"...REALLY!!!! Again, I have 3 Smart TVs, Xbox360, and Wii, that are connected to the network just fine .even my neibor comes with his Ipad3 and connects to my network just fine......and I can connect with my ipad to any other network without any problems... BTW, I have already removed the DirectTV app from the ipad....but I still cannot connect to my network..
View 2 Replies
View Related
Sep 14, 2012
no devices on my network can connect to the internet through my router if it through WiFi or through Ethernet.if i connect directly to the modem i can connect.I can connect to the router configuration page but nothing else.i am running windows 7 and the router is a linksys wrt160n v3. internet,WiFi, and power light are all on the router.I have power cyceld the modem and reset the router with nothing changing
ipconfig /all information connected to router (no internet acces)
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.[code].....
View 5 Replies
View Related
Mar 18, 2013
I have WRT160N at home and I would like to connect it with router with Ethernet and then connect WRT160N wirelessly with iPad...
View 1 Replies
View Related
Feb 21, 2010
I've just purchased a new router (WRT160N) and wireless adapter (WMP600N). The problem is that I cannot connect to the router when I have it set to WPA or WPA2. At the same time my laptop with Atheros 9285n connects to router and works perfectly. When the wireless security disabled the wmp600n connects to the router without a problem and shows 300mbps connection speed and laptop 150mbps. When the router is set to WEP both laptop and pc with wmp600n connect but work very slow - 54mbps only.
View 7 Replies
View Related
Feb 15, 2013
I am a powerbook G4 user, Mac's wireless is good so far.OSX 10.4.11 and when I am using E1000 extender, often the admin page shows up automatically like 192.168.1.1 and asks me to log in and once I log into the admin page, of corse show up the admin page.So, all my other internet pages are gone every time.Only shows the admin page.It does not happen with windows PCs.
View 1 Replies
View Related
Jun 17, 2012
I trying to portforward on my WRT54G2 router but can't access webpage because I don't know the username or password. Is there any way to find out the password and username
View 1 Replies
View Related
Jun 25, 2011
I have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions). 1. My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable. 2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not (I have them named differently). How do I see both wireless connections?
View 9 Replies
View Related
Apr 18, 2013
WRT120N router: After several hours on the phone with Technical support I got nowhere. Guy had me putting in "admin" in the user name then the PW. I kept getting the 401 authorization required message. After all that I reset my router and used the disk to setup again. After that I went again to the 192.168.1.1 and got the request for authorization, entered admin in the PW and it does nothing, just reloads the request and browser keeps connecting. I have WIN 7 HP, use Firefox 5.0 mostly, but tried on IE8 as well and it does the same thing. I am attempting to open a port.
View 4 Replies
View Related
Mar 6, 2008
I own a wireless WRT54G, which has worked fine in the past. After setting up a new wireless network, I went to the router webpage to open some ports. The problem with the page loading is that it doesn't display correctly. No clickable text is displayed on the top of the page or the side bar, so I basically can't do anything whatsoever to configure it. I've tried loading it up in both Firefox and Internet Explorer, with IE saying the page loaded but with errors.
View 5 Replies
View Related