Linksys Wireless Router :: WRT160Nv3 Display Active Connections?
Nov 24, 2011is there a way to display the active wireless connections?
View 2 Replies
ADVERTISEMENT
Linksys Wireless Router :: E3000 Won't Display Ethernet Connections?
Sep 9, 2012I installed dd-wrt latest for this router but it wont show any connections to the ports. I can connect to the router with my internet port connected to the computer but that is it. I tried connecting the modem to a port connection and it showed connected. I'm confused as the firmware loaded fine. May be I went over my abilities which is usually the case.
View 1 Replies View RelatedLinksys Wireless Router :: Getting Downgrade For WRT160nV3?
Jun 21, 2010I need to downgrade my WRT160n so that it will work with Xbox LIVE again. I've been told by Xbox that the only certified working firmware for my router is 3.0.02.003, But I'm using 3.0.02.004.
View 9 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 Slow Speeds
Oct 16, 2011I bought WRT160Nv3 3 months ago . The computer is wired to the router . So I noticed 5 says ago that my download speed is slower – from 70mbps to20-30mbps . I have called the cable company and their tech support reports a good signal to the house. My firmware is up to date . I tried hard resetting the router-nothing.Plug,unplug still nothing.
View 9 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 / How To Add Removed Computer
Sep 8, 2012Mistakenly 'removed' a PC from the network. I followed the instructions on the EasyLink Advisor to add a new computer: open the .exe file that contains all the settings onto the new computer. That didn't work. But even if I removed the computer (by mistake) I don't see why when she goes to log in to the wifi account, she can't just type in the password.how to add a new computer to the wifi WRT160Nv3?
View 1 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 Connects But Can't Surf?
May 11, 2012My WRT160Nv3 appears to be working fine however, I believe there's something wrong with the setup that's making my connection unreliable. All my devices can detect the router, they can connect, but once it comes to surfing on those devices, no pages are loading up despite being connected with excellent signal strength.
View 1 Replies View RelatedLinksys Wireless Router :: WRT160nv3 And Intermittent VPN Disconnects?
Apr 2, 2013I'm being kicked off my VPN connection back to the home office on occasion, using a Nortel VPN client. The logs show:
4/2/2013 9:58:26.883 [ENGS] -I-VerifyServerIsAlive: ISAKMP had traffic (after keepalive).
4/2/2013 9:58:27.383 [ENGS] -I-VerifyServerIsAlive: Set receivedData FALSE.
4/2/2013 9:58:28.555 [ENGS] -I-Protocol not recognized - message dropped.
4/2/2013 9:58:44.586 [ENGS] -I-Protocol not recognized - message dropped.
[code]....
the common fault seems to be DynamicDnsCleanup causing the trouble.(causes routing table to change, knocking down the VPN....) Is this a function occurring in the router? I can't find search results showing so.
Linksys Wireless Router :: WRT160Nv3 3.0.02 To 3.0.03 And Port Tracking?
Jul 30, 2011I downloaded and upgraded my router to the 3.0.03 firmware. Downloaded the bin file, saved the config, upgraded firmware, reset router and restored configuration. Everything went ok but router still shows 3.0.02 firmware. ?I have a camera system on the network routed through two opened ports on the router. Everything works fine.The camera system does not store any logs relative to remote access. I would like to log any incoming traffic on the camera open ports. Is there a way to do this on this router?
View 2 Replies View RelatedLinksys Wireless Router :: Wrt160Nv3 - How To Reconnect A Device
Aug 29, 2011i have a wrt160Nv3 wireless router.
I had a wireless device connecting to my network - so I blocked it. Unfortunaletly turned out to be my daughters ipod touch. How can i reconnect it back. dont seem to be able to add device and linksys keeps blocking her connection attempts
Linksys Wireless Router :: WRT160Nv3 Still Responds To IMCP
Sep 20, 2011My WRT160Nv3 router responds to ICMP (ping), even though I have "Filter Anonymous Internet Requests" enabled. I toggled it off and on to see if that made a difference, but no luck.I am pinging it from the "outside", through the WWW, so it's not from inside the LAN..
View 6 Replies View RelatedLinksys Wireless Router :: Add An External Antenna To WRT160Nv3?
Jul 30, 2011Is it possible to add an external antenna to this WRT160Nv3 router? Some spots are just on the one bar signal level that comes and goes.
View 1 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 Can't Connect To DNS Server
Jan 13, 2012All of a sudden, I could not connect to the Internet. I kept getting error message "Can't connect to DNS server", or similar. I have an ATT/Yahoo account, Speed stream 5360 Modem and WRT160Nv3 router. All was working well until yesterday. I was finally able to speak to an ATT Tech today, and he guided me through several troubleshooting actions and we were finally able to connect just using the modem. But when I connect the router, the network works, but I can't connect to the Internet. If I disconnect the router, I can access the Internet. None of my settings has changed. I saved router settings on my computer, and have compared them; all the same. The tech finally said it could be the blue cable from router to computer, or the router. So I'm hoping for troubleshooting before I buy another cable and/or router.
View 1 Replies View RelatedLinksys Wireless-N Broadband Router WRT160Nv3 / Open NAT For 2 Xbox 360's?
Jan 28, 2011I got a new Xbox 360 Slim and he has it connected through wireless, and His older Xbox 360 connected through Ethernet. And well we would like to play some games online without some major lag. So is it possible to have an Open NAT with two Xbox's within the same network?He has a Linksys Wireless-N Broadband Router WRT160Nv3.
View 5 Replies View RelatedLinksys Wireless Router :: How To Connect To Xbox Live With WRT160Nv3
Sep 23, 2012It worked fine for my PC's and Xbox, but I had disconnected my router for a while, plugged it back in and my xbox simply cannot receive any connection. I should also note that I use an ethernet cord (I don't use it wirelessly) and it has nothing to do with the ethernet cord (I've tried several). Using network magic, it does confirm that a connection to the game console and the router.I've looked through the forums and all of what I found, are NAT problems/issues or fixing a wireless issue, but not an issue when using an ehternet cord.
View 1 Replies View RelatedLinksys Wireless Router :: Wrt160nv3 / Port Forwarding Is Not Configured
Jun 18, 2012I just noticed that i have port 10080 open on my router (wrt160nv3). Port forwarding is not configured and web administrative access is only allowed through https (443). DDNS is also disabled, I was wondering why this port is open.
View 9 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 Connection To Internet Drops
Oct 19, 2011Ive had the WRT160Nv3 for a while and its all been great but recently ive had some issues.Im not sure if this is my ISP but the connection to the router drops out or i lose connection to the internet.I thought the firmware was out of date so i updated to 3.03 from 3.02 and it doesnt seem to fix the problem. what it did was create new problem. now when you edit settings it says >> JAVASCRIPT; true or if i try to edit port forwording it wont save the data i enter.This was all brought to my attention when I tried to connect to my wireless and my SSID was not what i set it as, the router had some way been reset. could something of happened to the router for it to be acting all crazy.
View 1 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 - Firmware Upgrade Failed
Feb 22, 2012My router: WRT160Nv3
My Firmware Version: v3.0.02
Upgrade version: Ver.3.0.03 Build 3
I can not upgrade, always gives the same error message: Firmware upgrade failed!
Linksys Wireless Router :: WRT160Nv3 Constantly Resetting To Factory Defaults?
Jan 9, 2010WRT160Nv3 Firmware Version: v3.0.02
I've been using Linksys for years but the last two routers I have purchased have been very problematic.
- My router hasn't had this problem before. The other day I was downloading 4 games at a time from STEAM, when I got home from work I found that my router had completely gone back to factory settings. So I configured my DSL PPPoE, SSID, Wireless Security (WPA) changed the default admin PW and about 20 minutes later it was back to factory again.
I've done a "hard" reset and reconfigured and still it resets itself. What's also upsetting is this completely opens my network up to ANYONE when this happens...
So far in the past 2 days I have (now using a backup restore file) re-configured the device 10 times.
The only thing I can think of is that I just got Windows 7 the same day this started happening. I thought it could be STEAM as well so right now I have STEAM closed to see if it resets while it isn't running.
Could TOO much demand on the router cause it to completely reset itself to factory config?? Seems to me like there's a huge firmware or hardware problem here.
I have other friends and even co-workers that also have problems galore with their Linksys products...No other router it seems has as MANY issues as Linksys. Hat to say it but my next purchase most likely will not be another one of their products. This just shouldn't be happening.
Linksys Wireless Router :: WRT160Nv3 Resetted To Factory Defaults Automatically
Mar 9, 2013today I got up and discovered that my WRT160Nv3 router has resetted to factory defaults itself, the name of the Wifi network was "linksys" and all configurations were the defaults...
That's normal? This is the first time it happens.
Linksys Wireless Router :: Port Forwarding Using WRT160Nv3 To Minimize Static?
Nov 27, 2011I have been using this router for quite some time, with a setup like.. Cable Modem ==> Vonage ==> WRT160Nv3 ==> PC. It has been working very fine for all these years (6), but now I hear static disturbances in my phone calls, and so I decided to do port forwarding for the vonage device, to minimize the noise. This device uses a static ip address of 192.168.15.1, and in the Linksys software, I am not able to use any ip addresses other than "192.168.1.*" in the port forwarding page.
View 1 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 Connection Speed Gradually Slows?
Nov 9, 2009I have a WRT160Nv3 router connected to a CM100 modem. I noticed that over time, perhaps a day or more, the connection speed slows. Usually, unplugging the router for a while then starting it up again restores the speed as per my cable company's speed test. I have called the cable company and their tech support reports a good signal to the house.
View 6 Replies View RelatedLinksys Wireless Router :: Access Restrictions Option Does Not Exist On WRT160Nv3
Jun 14, 2012Access Restrictions option does not exist on my WRT160Nv3 Broadband Router Setup Page and I need to use that option.
View 2 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 - Set Up Access Restrictions To Allow Only Specific Websites?
Sep 12, 2012Possible to set up access restrictions to Allow only specific websites?
View 1 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 - Security Certificate Pop Up Daily With Errors
May 15, 2012My issue occurs on ALL of my home computers (MacBook and iMac using wi-fi) and ALL of my browsers (Safari, Firefox, Chrome).The problem:- Security Certificates: They pop up daily for Facebook mostly, but also Twitter. I will click Continue, which takes me to...- 404 Error/Page Not Found Error: After the Certificate error mentioned above, this happens. Mostly to YouTube. It will stay like this for a few hours. I've cleared cache, rebooted, etc. etc. Nothing works.- Images turn into little blue boxes with a question mark in them. **When this happens, it's an indication that a Certificate box will pop up out of the blue.- Even on Google.com, it will say: Invalid URLThe requested URL "/", is invalid.Reference #9.df260e6b.1336506889.420cf4fSo what can I do? It happens on both my Macbook Pro and iMac - both connected wirelessly to a Linksys router/cable modem. The router is Wireless-N Broadband Router WRT160Nv3 with Firmware Version: v3.0.02.
View 1 Replies View RelatedLinksys Wireless Router :: Browser Cannot Display E3200 Webpage?
Jun 25, 2011I have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions). 1. My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable. 2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not (I have them named differently). How do I see both wireless connections?
View 9 Replies View RelatedLinksys Wireless Router :: E1200 - Client List Will Not Display
May 23, 2011I picked up an E1200 and set it up successfully. I am using wireless MAC filtering, and decided to pull up the list of connected wireless clients (Wireless >> Wireless MAC Filter >> push "Wireless Client List" button).Immediately after this the Web UI of the E1200 becomes inaccessible. It still routes traffic, and the router remains pingable, but it will not allow access to the Web UI for several minutes. The error that appears upon attempt to access the Web UI during this time window is similar to the above, but reads "Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection."
I have tried this in Google Chrome, Firefox 4, and MSIE on two separate computers. Each browser displays the error a bit differently (MSIE, for example, just says it can't display the page and gives no further detail) but the net results are always the same. I have tried resetting the device to factory defaults in addition to re-downloading the firmware from the Cisco/Linksys website and installing it. No improvement.
I have also noted that the Log (Administration >> Log; and yes, I have it enabled) doesn't appear to be picking up anything at all. In fact, the Security log, which supposedly (according to the Help) "displays the login information for the Router’s browser-based utility," is also blank.
Linksys Wireless Router :: E4200 - Few Seconds For Web Interface To Display
Jul 16, 2011I have a E4200 setup for 2.4 & 5G running the latest firmware. When I connect to the router wireless 192.168.1.1 and log in, it takes a few seconds for the web interface to display. Same happens when switching to the different config tabs. Is there any reason for this? I would think it would be immediate but it takes anywhere from 3-5 seconds for IE9 to respond.
View 2 Replies View RelatedLinksys Wireless Router :: WRT160N Doesn't Display Version Number On Bottom
Jul 2, 2011My router is the WRT160N, and it doesn't display the version number on the bottom which according to your website means my router is a VERSION 1.SO, why is it that my router says it has:
Firmware Version: v1.53.0 Dec 19, 2007
And the latest firmware is
Firmware 11/08/2010 Ver.1.02.11
That looks like an EARLIER firmware version to me judging by the firmware version yet it is dated later. **bleep**. If you want, I can upload a photo of my router's model no. for all to see.My question is, am I safe to 'upgrade' to this 'earlier but dated later' firmware version or not? Why is mine showing as having a later version.
Linksys Wireless Router :: E4200 Connection Will Drop / Windows Display Yellow Triangle On Wifi Signal
Feb 6, 2013I have several E4200 routers deployed in our library district. In one branch, we have been having sporadic problems with computers not being able to maintain a connection. Typically the computer will connect and then the connection will drop and Windows will display the yellow error triangle on the wifi signal strength display.I have swapped the router with another brand new E4200 with the latest firmware but am still having this problem.
View 6 Replies View RelatedCisco WAN :: 5520 - Active / Passive ASA With Redundant ISP Connections
Apr 25, 2012Currently we are using a single connection to our ISP and in the coming months will be moving to a two seperate connections (to same ISP). In our current setup we utilize active/passive ASA's (5520, single context) and would like to utilize that going forward as well, the reason being is our DMZ's all hang off of these ASA's and we have fiber connectivity between our datacenters.Our main datacenter and DR Datacenter are basically one big LAN with fiber between them, so we have our DMZ networks at both locations currently with both terminating in our ASA's. That way if the ASA at our current site fails the DMZ's are still accessible via the secondary firewall at our DR facility.
View 1 Replies View RelatedCisco Firewall :: Show Active TCP Connections In ASA 5520?
Jun 5, 2013how many active TCP sessions my ASA has but having a hard time finding this information. When I do "show conn count" from the CLI it shows what I'm guessing is a sum of both TCP and UDP. Is there any way to get just the TCP connections?
View 3 Replies View RelatedCisco WAN :: 2911 ISR - View Active Concurrent Connections
Feb 18, 2013I have been looking for the command to view all concurrent active connections or sessions on our Cisco 2911. I want to see what the total connections or sessions are at peak times throughout the day.
View 4 Replies View RelatedCisco VPN :: DS3 - Limit Number Of Active IPSec Connections Per Host
May 18, 2011I have a hub and spoke network with over 100 remote sites that connect to me via ipsec vpn. One of these locations, the only one using FIOS coincidently, is initiating 200+ tunnels back to my side which is causing saturation issues on my DS3. (I can post config if requested), and how can I limit the number of active tunnels it's establishing?
View 1 Replies View Related
