Linksys Wireless Router :: WRT160Nv3 Can't Connect To DNS Server

Jan 13, 2012

All of a sudden, I could not connect to the Internet. I kept getting error message "Can't connect to DNS server", or similar. I have an ATT/Yahoo account, Speed stream 5360 Modem and WRT160Nv3 router. All was working well until yesterday. I was finally able to speak to an ATT Tech today, and he guided me through several troubleshooting actions and we were finally able to connect just using the modem. But when I connect the router, the network works, but I can't connect to the Internet. If I disconnect the router, I can access the Internet. None of my settings has changed. I saved router settings on my computer, and have compared them; all the same. The tech finally said it could be the blue cable from router to computer, or the router. So I'm hoping for troubleshooting before I buy another cable and/or router.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: How To Connect To Xbox Live With WRT160Nv3

Sep 23, 2012

It worked fine for my PC's and Xbox, but I had disconnected my router for a while, plugged it back in and my xbox simply cannot receive any connection. I should also note that I use an ethernet cord (I don't use it wirelessly) and it has nothing to do with the ethernet cord (I've tried several). Using network magic, it does confirm that a connection to the game console and the router.I've looked through the forums and all of what I found, are NAT problems/issues or fixing a wireless issue, but not an issue when using an ehternet cord.

View 1 Replies View Related

Linksys Wireless Router :: Getting Downgrade For WRT160nV3?

Jun 21, 2010

I need to downgrade my WRT160n so that it will work with Xbox LIVE again. I've been told by Xbox that the only certified working firmware for my router is 3.0.02.003, But I'm using 3.0.02.004.

View 9 Replies View Related

Linksys Wireless Router :: WRT160Nv3 Slow Speeds

Oct 16, 2011

I bought WRT160Nv3 3 months ago . The computer is wired to the router . So I noticed  5 says ago that  my download speed is slower – from 70mbps to20-30mbps . I have called the cable company and their tech support reports a good signal to the house. My firmware is up to date . I tried hard resetting the router-nothing.Plug,unplug still nothing.

View 9 Replies View Related

Linksys Wireless Router :: WRT160Nv3 / How To Add Removed Computer

Sep 8, 2012

Mistakenly 'removed' a PC from the network. I followed the instructions on the EasyLink Advisor to add a new computer: open the .exe file that contains all the settings onto the new computer. That didn't work. But even if I removed the computer (by mistake) I don't see why when she goes to log in to the wifi account, she can't just type in the password.how to add a new computer to the wifi WRT160Nv3?

View 1 Replies View Related

Linksys Wireless Router :: WRT160Nv3 Connects But Can't Surf?

May 11, 2012

My WRT160Nv3 appears to be working fine however, I believe there's something wrong with the setup that's making my connection unreliable. All my devices can detect the router, they can connect, but once it comes to surfing on those devices, no pages are loading up despite being connected with excellent signal strength. 

View 1 Replies View Related

Linksys Wireless Router :: WRT160nv3 And Intermittent VPN Disconnects?

Apr 2, 2013

I'm being kicked off my VPN connection back to the home office on occasion, using a Nortel VPN client. The logs show:
 
4/2/2013 9:58:26.883 [ENGS] -I-VerifyServerIsAlive: ISAKMP had traffic (after keepalive).
4/2/2013 9:58:27.383 [ENGS] -I-VerifyServerIsAlive: Set receivedData FALSE.
4/2/2013 9:58:28.555 [ENGS] -I-Protocol not recognized - message dropped. 
4/2/2013 9:58:44.586 [ENGS] -I-Protocol not recognized - message dropped.

[code]....
 
the common fault seems to be DynamicDnsCleanup causing the trouble.(causes routing table to change, knocking down the VPN....) Is this a function occurring in the router? I can't find search results showing so.

View 7 Replies View Related

Linksys Wireless Router :: WRT160Nv3 3.0.02 To 3.0.03 And Port Tracking?

Jul 30, 2011

I downloaded and upgraded my router to the 3.0.03 firmware.  Downloaded the bin file, saved the config, upgraded firmware, reset router and restored configuration.  Everything went ok but router still shows 3.0.02 firmware. ?I have a camera system on the network routed through two opened ports on the router.  Everything works fine.The camera system does not store any logs relative to remote access.  I would like to log any incoming traffic on the camera open ports.  Is there a way to do this on this router?

View 2 Replies View Related

Linksys Wireless Router :: Wrt160Nv3 - How To Reconnect A Device

Aug 29, 2011

i have a wrt160Nv3 wireless router.
 
I had a wireless device connecting to my network - so I blocked it.  Unfortunaletly turned out to be my daughters ipod touch.  How can i reconnect it back.  dont seem to be able to add device and linksys keeps blocking her connection attempts

View 1 Replies View Related

Linksys Wireless Router :: WRT160Nv3 Still Responds To IMCP

Sep 20, 2011

My WRT160Nv3 router responds to ICMP (ping), even though I have "Filter Anonymous Internet Requests" enabled. I toggled it off and on to see if that made a difference, but no luck.I am pinging it from the "outside", through the WWW, so it's not from inside the LAN..

View 6 Replies View Related

Linksys Wireless Router :: Add An External Antenna To WRT160Nv3?

Jul 30, 2011

Is it possible to add an external antenna to this WRT160Nv3 router?  Some spots are just on the one bar signal level that comes and goes.

View 1 Replies View Related

Linksys Wireless-N Broadband Router WRT160Nv3 / Open NAT For 2 Xbox 360's?

Jan 28, 2011

I got a new Xbox 360 Slim and he has it connected through wireless, and His older Xbox 360 connected through Ethernet. And well we would like to play some games online without some major lag. So is it possible to have an Open NAT with two Xbox's within the same network?He has a Linksys Wireless-N Broadband Router WRT160Nv3.

View 5 Replies View Related

Linksys Wireless Router :: WRT160Nv3 Display Active Connections?

Nov 24, 2011

is there a way to display the active wireless connections?

View 2 Replies View Related

Linksys Wireless Router :: Wrt160nv3 / Port Forwarding Is Not Configured

Jun 18, 2012

I just noticed that i have port 10080 open on my router (wrt160nv3). Port forwarding is not configured and web administrative access is only allowed through https (443). DDNS is also disabled, I was wondering why this port is open.

View 9 Replies View Related

Linksys Wireless Router :: WRT160Nv3 Connection To Internet Drops

Oct 19, 2011

Ive had the WRT160Nv3 for a while and its all been great but recently ive had some issues.Im not sure if this is my ISP but the connection to the router drops out or i lose connection to the internet.I thought the firmware was out of date so i updated to 3.03 from 3.02 and it doesnt seem to fix the problem. what it did was create new problem. now when you edit settings it says >> JAVASCRIPT; true or if i try to edit port forwording it wont save the data i enter.This was all brought to my attention when I tried to connect to my wireless and my SSID was not what i set it as, the router had some way been reset. could something of happened to the router for it to be acting all crazy.

View 1 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Firmware Upgrade Failed

Feb 22, 2012

My router: WRT160Nv3
My Firmware Version: v3.0.02
Upgrade version: Ver.3.0.03 Build 3
 
 I can not upgrade, always gives the same error message: Firmware upgrade failed!

View 6 Replies View Related

Linksys Wireless Router :: WRT160Nv3 Constantly Resetting To Factory Defaults?

Jan 9, 2010

WRT160Nv3 Firmware Version: v3.0.02  
 
I've been using Linksys for years but the last two routers I have purchased have been very problematic.
 
- My router hasn't had this problem before. The other day I was downloading 4 games at a time from STEAM, when I got home from work I found that my router had completely gone back to factory settings.  So I configured my DSL PPPoE, SSID, Wireless Security (WPA) changed the default admin PW and about 20 minutes later it was back to factory again.
 
I've done a "hard" reset and reconfigured and still it resets itself. What's also upsetting is this completely opens my network up to ANYONE when this happens...
 
So far in the past 2 days I have (now using a backup restore file) re-configured the device 10 times.
 
The only thing I can think of is that I just got Windows 7 the same day this started happening. I thought it could be STEAM as well so right now I have STEAM closed to see if it resets while it isn't running.
 
Could TOO much demand on the router cause it to completely reset itself to factory config?? Seems to me like there's a huge firmware or hardware problem here.
 
I have other friends and even co-workers that also have problems galore with their Linksys products...No other router it seems has as MANY issues as Linksys. Hat to say it but my next purchase most likely will not be another one of their products. This just shouldn't be happening.

View 5 Replies View Related

Linksys Wireless Router :: WRT160Nv3 Resetted To Factory Defaults Automatically

Mar 9, 2013

today I got up and discovered that my WRT160Nv3 router has resetted to factory defaults itself, the name of the Wifi network was "linksys" and all configurations were the defaults...
 
That's normal? This is the first time it happens.

View 2 Replies View Related

Linksys Wireless Router :: Port Forwarding Using WRT160Nv3 To Minimize Static?

Nov 27, 2011

I have been using this router for quite some time, with a setup like.. Cable Modem ==> Vonage ==> WRT160Nv3 ==> PC.  It has been working very fine for all these years (6), but now I hear static disturbances in my phone calls, and so I decided to do port forwarding for the vonage device, to minimize the noise.  This device uses a static ip address of 192.168.15.1, and in the Linksys software, I am not able to use any ip addresses other than "192.168.1.*" in the port forwarding page.  

View 1 Replies View Related

Linksys Wireless Router :: WRT160Nv3 Connection Speed Gradually Slows?

Nov 9, 2009

I have a WRT160Nv3 router connected to a CM100 modem.  I noticed that over time, perhaps a day or more, the connection speed slows.  Usually, unplugging the router for a while then starting it up again restores the speed as per my cable company's speed test.  I have called the cable company and their tech support reports a good signal to the house. 

View 6 Replies View Related

Linksys Wireless Router :: Access Restrictions Option Does Not Exist On WRT160Nv3

Jun 14, 2012

Access Restrictions option does not exist on my WRT160Nv3 Broadband Router Setup Page and I need to use that option.

View 2 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Set Up Access Restrictions To Allow Only Specific Websites?

Sep 12, 2012

Possible to set up access restrictions to Allow only specific websites?

View 1 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Security Certificate Pop Up Daily With Errors

May 15, 2012

My issue occurs on ALL of my home computers (MacBook and iMac using wi-fi) and ALL of my browsers (Safari, Firefox, Chrome).The problem:- Security Certificates: They pop up daily for Facebook mostly, but also Twitter. I will click Continue, which takes me to...- 404 Error/Page Not Found Error: After the Certificate error mentioned above, this happens. Mostly to YouTube. It will stay like this for a few hours. I've cleared cache, rebooted, etc. etc. Nothing works.- Images turn into little blue boxes with a question mark in them. **When this happens, it's an indication that a Certificate box will pop up out of the blue.- Even on Google.com, it will say: Invalid URLThe requested URL "/", is invalid.Reference #9.df260e6b.1336506889.420cf4fSo what can I do? It happens on both my Macbook Pro and iMac - both connected wirelessly to a Linksys router/cable modem. The router is Wireless-N Broadband Router WRT160Nv3 with Firmware Version: v3.0.02.

View 1 Replies View Related

Linksys Wireless Router :: Can't Connect To WR1043ND FTP Server From Web

Feb 13, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

I just upgrade to 3.13.12 Build 120405 Rel.33996n firmware, because i need FTP server function.I did as on this site[url]..

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gc - PSP Cannot Connect To EA Server

Jan 15, 2007

i have a wrt54gc router.  I can connect to the interent without no problems what so ever, however, i try and play a game on line and it tells me it cannot connect to the EA server.  My psp is running v3.03.  and the router 1.001

View 3 Replies View Related

Linksys Wireless Router :: E1500 Won't Allow To Connect To An SMTP Server?

Mar 23, 2013

I have an E1500 N300 Router, I've had it for 3 or 4 weeks now. Ever since I've had it, I can no longer send e-mails out with Eudora nor Outlook.  I've tried using about 3 different SMTP's just to verify that it wasn't a server issue. I tried Port Forwarding in the router settings. I selected SMTP and POP3 and checked Enable on both, then save changes. But they don't appear to be taking, as when I go back in and try to set them again, it let's me and doesn't give me a Port Overlap warning. I've been told that I shouldn't need to mess with Port Forwarding at all, I just need to go into the Firewall settings and open up the SMTP, POP3, and IMAP ports. However, I don't see any settings in my Router settings to allow this, aside from Port Forwarding and it's not actually saving the changes. I will admit, I'm not all that great with this stuff, and this is the first time I've had any issues with a Router stopping me from E-mailing.

View 9 Replies View Related

Linksys Wireless Router :: How To Connect E4200 Media Server

Jul 17, 2011

Connecting E4200 media server (external hard drive connected to USB in router) to PS3.mapped External HD to media server folder. and enabled UPnP Media Server. after trying all options I can't see media server in PS3.

View 6 Replies View Related

Linksys Wireless Router :: WRT350N Can't Get App To Connect To Server Via External IP

May 23, 2012

I have a Linksys WRT350N which I am trying to use an app on my iPhone to connect to my server using the public/external IP of my cable modem. I have the necessary ports opened and also tried adding the server to the DMZ but no matter what I can not get the app to connect to my server via my external IP when I am on my WiFi. I can connect without any problems if I use the NATed IP on the server when my phone is connected to the WiFi. It also works fine connecting to the external IP if I am on any other WiFi or the cellular network (which shows ports are forwarded correctly). I just can't connect to the server when I use the external IP and I am on my WiFi network. This is annoying as I need to keep changing the app's settings back and forth between the external and internal IP whenever I am home or away. I am left thinking this is some kind of issue with the WRT350N not allowing local internal traffic to reach the external IP. Any way to resolve this, maybe by entering a static route?

View 2 Replies View Related

Linksys Wireless Router :: Connect Exchange Server Via Wifi And Ea6500?

Dec 30, 2012

Since I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems.

View 6 Replies View Related

Linksys Wireless Router :: E2000 When Try To Setup Wired Media Server It Will Not Connect

Aug 11, 2011

I have just setup a E2000 at home. All the wireless connections work and also my NAS server who i wired. But when i try to setup my wired media server it will not connect.

View 6 Replies View Related

Cisco :: WPA Key For WRT160Nv3 Router?

Feb 11, 2011

I need to type the WPA key for my wireless network on a PS3. I just can't find the 63 digit code anywhere. I've already logged on the router's page by typing the admin and passcode... there's absolute no information on the WPA Key digits

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Unable To Select Folder Access / FTP Server / Media Server

Dec 9, 2012

I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server.  I click them and nothing happens.Also, the Cisco light on the router keeps blinking.

View 5 Replies View Related

Routers / Switches :: Linksys WRT160Nv3 Network Error - Unable To Look Up Host Names

May 12, 2012

I am able to connect to corporate VPN with no issues when connecting directly to ISP modem. When I try to complete the same VPN connection via a Wireless Router (Linksys WRT160Nv3) i get the following message: "Network error. Unable to look up host names"I have tried connecting and it will initially connect, but 15-30 seconds it will drop and connection can't be re-established.Is there a setting on the Linksys WRT160Nv3 that needs to be changed?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved