Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
I just upgrade to 3.13.12 Build 120405 Rel.33996n firmware, because i need FTP server function.I did as on this site[url]..
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : telecentro
I recently purchased a tl-wr842nd, my printer is a hp laserjet 1020 and it is in the compatible list as I seen. The problem is that I connect the printer in the usb routers port and the led do not light up, I tried putting my pendrive to see if the usb routers port wasn't working but it does since the pendrive is accepted and online and the usb led lights.I downloaded and installed the latest firmware but there's no change, I did everything like it saids in the faq 415 where it explains how to install and use printer server with no luck.
Region : Spain
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : BT - Arrakis (Spain)
I am trying to get the print server functionality working but no luck. I have a Brother HL-2030 and I know that it is not in the compatibility list. But the HL-2040 is, and the differences between the two are minimal. However, the TP-Link printer utility does not see the printer and the network scanner function is grayed out.
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
The Media Server feature is quite nice to have but the fact that it is limited to 100 files is a joke. I have a 2TB drive pugged into this router's USB port with hundreds of video files and even more mp3s. Is there any chance that in a future firmware this limit to be removed or at least increased to say 1000?
i have a wrt54gc router. I can connect to the interent without no problems what so ever, however, i try and play a game on line and it tells me it cannot connect to the EA server. My psp is running v3.03. and the router 1.001
View 3 Replies View RelatedAll of a sudden, I could not connect to the Internet. I kept getting error message "Can't connect to DNS server", or similar. I have an ATT/Yahoo account, Speed stream 5360 Modem and WRT160Nv3 router. All was working well until yesterday. I was finally able to speak to an ATT Tech today, and he guided me through several troubleshooting actions and we were finally able to connect just using the modem. But when I connect the router, the network works, but I can't connect to the Internet. If I disconnect the router, I can access the Internet. None of my settings has changed. I saved router settings on my computer, and have compared them; all the same. The tech finally said it could be the blue cable from router to computer, or the router. So I'm hoping for troubleshooting before I buy another cable and/or router.
View 1 Replies View RelatedI have an E1500 N300 Router, I've had it for 3 or 4 weeks now. Ever since I've had it, I can no longer send e-mails out with Eudora nor Outlook. I've tried using about 3 different SMTP's just to verify that it wasn't a server issue. I tried Port Forwarding in the router settings. I selected SMTP and POP3 and checked Enable on both, then save changes. But they don't appear to be taking, as when I go back in and try to set them again, it let's me and doesn't give me a Port Overlap warning. I've been told that I shouldn't need to mess with Port Forwarding at all, I just need to go into the Firewall settings and open up the SMTP, POP3, and IMAP ports. However, I don't see any settings in my Router settings to allow this, aside from Port Forwarding and it's not actually saving the changes. I will admit, I'm not all that great with this stuff, and this is the first time I've had any issues with a Router stopping me from E-mailing.
View 9 Replies View RelatedConnecting E4200 media server (external hard drive connected to USB in router) to PS3.mapped External HD to media server folder. and enabled UPnP Media Server. after trying all options I can't see media server in PS3.
View 6 Replies View RelatedI have a Linksys WRT350N which I am trying to use an app on my iPhone to connect to my server using the public/external IP of my cable modem. I have the necessary ports opened and also tried adding the server to the DMZ but no matter what I can not get the app to connect to my server via my external IP when I am on my WiFi. I can connect without any problems if I use the NATed IP on the server when my phone is connected to the WiFi. It also works fine connecting to the external IP if I am on any other WiFi or the cellular network (which shows ports are forwarded correctly). I just can't connect to the server when I use the external IP and I am on my WiFi network. This is annoying as I need to keep changing the app's settings back and forth between the external and internal IP whenever I am home or away. I am left thinking this is some kind of issue with the WRT350N not allowing local internal traffic to reach the external IP. Any way to resolve this, maybe by entering a static route?
View 2 Replies View RelatedSince I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems.
View 6 Replies View RelatedI have just setup a E2000 at home. All the wireless connections work and also my NAS server who i wired. But when i try to setup my wired media server it will not connect.
View 6 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Plusnet
I'm on a fibre connection from Plusnet and bought the TL-WR1043ND because of the advertised ability to use PPTP VPN to connect to my work server (the supplied Plusnet router doesn't allow it and is locked down).However, I cannot connect via PPTP VPN on this TL router either. I know my VPN settings are correct and I have had a brief search and found others have this problem, but short of installing third party firmware on the router, how to get this router running my PPTP VPN?
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmwar Version :
ISP : AT&T
I recently got a new modem from AT&T. I hooked it up and everything worked fine for a few days. Last night some friends came over with their wireless devices (iphone, ipad) and after a while, the internet got really slow. Then it was unresponsive but it said that we were still connected to the network. So I decided to restart the router. Once it was finished rebooting, we were not even able to connect to the network at all. Even on my computer downstairs I was not able to connect wirelessly. I am connected via ethernet from the router right now on my computer upstairs and that is working fine. I have tried rebooting the router to factory settings, unplugging the modem, rebooting the modem, unplugging the modem, changing the router settings, pretty much every practical solution for simple connectivity issues.
Region : Canada
Model : TL-WR1043ND
Hardware Version : V1
I was wondering if it is possible to connect two routers through wireless and make them talk to each other. Here is why I need it, I currently Have 6 wireless IP Cameras going too 8. 2 are wired on one router in my house and the other 4 are wireless(with wired capabilities) Im going to wire the other 4 too a 2nd router so the cameras are always running and don't suffer any down time due to signal loss (happening a lot at the moment). How can I get Router B to talk to Router A, so I can look at all of the cameras from Laptop in my house which is closer to Router A.
My Router A is TL-WR1043ND, I'm also going to probably buy another one. How to configure it properly. So I can login to the cameras from my laptop.
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
I just bought and installed this wireless router, specifically so that I could use me kindle..but, keep getting rejected due to a password error...the password is correct. On Amazon it looks like there may be a setting that needs adjustment in order to accept the Kindle..
I've recently bought a TL-WR1043ND & i'm trying to connect my Sky+ box to the Internet. When I connect the box directly to my broadband router all works OK. When I connect via an Ethernet connection on my TP-Link router - it get's an IP address from the router but it will not connect to the internet.
View 4 Replies View RelatedI purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies View RelatedI cannot connect to a PPTP on the outside of my network.We have a RV082, port 1723.It says verifying username and password but then disconnects.The error log says Blocked IP Spoofing.
View 1 Replies View RelatedI have router TP-link WR1043ND which cant handle more than 22 users?
View 4 Replies View RelatedRegion : Malaysia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.13 Build 120605 Rel.38634n
The connection is slow when I connect my notebook to the TP-Link TL-WR1043ND wireless router. If I connect my notebook directly to to the ISP modem, the connection speed back to normal.
Region : Sweden
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :
Have just bought this new router and it works faultlessly on all laptops and mobile phones in the house except for a laptop running Vista, the TCP IP properties look all right, it asks for a username and password ( only if connected by an ethernet cable, otherwise it cant access a network) but they are not accepted, the same username password was accepted for al the other computers
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : AT&T
Every 5 to 7 days my router loses connection with WAN (ISP modem) but connection over LAN is fine. It seems that 1043ND tries to connect to DSL modem from AT&T by username and password (that does not exists) instead of doing Dynamic IP. I understand that AT&T modem is of type of PPPoE but there is not a password or user id and connection must be dynamic. Page 192.168.0.1/logininfo of modem complains that I was trying to login with incorrect user id password. Every time I have to
1- connect the modem directly to my computer so the modem resets.
2- I have to reset 1043ND to factory default, reboot, and connect cables back how they were, Then go to WAN page do a release and renew to get connected to WAN again.
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP :
I have a flaky internet connection, and it drops every few days. I've thus far powercycled my router by unplugging and plugging it back in, which fixes the issue.
I'm traveling soon, and would like to be able to have access to my stuff remotely, even after the connection drops.
I have two ideas:Run a script in Windows 7 which would soft reboot the modem - free, not sure if soft reboot is enough though. If that doesn't work, Get a hardware which would powercycle the router - haven't researched if these are readily available and cheap
Is there a way to schedule a soft reboot of my router using Windows system tools? I'd schedule it to reboot every night.
Region : Others
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Baltcom TV
I have very low speed with router.First test without router - using cable directly to PC (DLINK DGS-3210 Managed SW - > My PC), here is result : Second test, using WR1043ND router (DLINK DGS-3210 Managed SW - > WR1043ND Router -> My PC), here is result : First of all, i thought that maybe WAN port is 100Mbit mode, but after i checked it on SW - port is still in 1Gig Mode (from router to PC, it is also 1Gig)Also downloading speed have same picture...Without router i get around 55MB/s, with router max that i saw is ~14MB/s....
Region : Canada
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 1
ISP : Kwic Internet
I have up graded to Windows 8 PRO but when I try to setup a wireless network Windows cannot find my router.
Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Which WORKGROUP does router have for sharing? I need this, because I have WD TW live and want to access routers usb hdd through sharing. Because router media server only supports up to 100 files, I see no other solution.Is there anyway to set the workgroup
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12
My router is not working wireless. Just stopped working. I hadn't touched anything in the settings. Nothing is picking up it's signal. All the lights are on saying that it SHOULD be working!I checked all the settings and they were as before. I have unplugged it and restarted, I have reset to factory settings and set it back up again but nothing! Works fine on the wire.
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP : Virgin Media
Bought recently and I'm very pleased with Setup and Performance.
However, even though I have tried repeatedly with different user details and passwords I cant access the router Config without resetting to defaults using the pin in the back and admin admin.
I am using W7 and get to a log in screen via Control Panel / ... Network Sharing Centre / Network Map and see Router. Click on this and up comes a User Name and Pasword form but it never works with what I entered for the router.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo
I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.
My DIR-655 is setup and working fine with WPA personal encryption to different laptops in my home network. Question: Can I connect a wireless print server (LinkSys WPS54GU2) that only supports 'G' wireless encryption? Can the DIR-655 support a mixed N and G network?Do I have to reconfigure my DIR-655 to the slower WEP encryption and create an entirely 'G' network to include one G network device?
View 1 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
certain websites couldn't be accessed on any of our devices (mixture of PC's, android and apple devices)After trying everything I could think of and even phoning our internet provider nothing would get the sites to load (Facebook, hotmail to name but two)A friend of mine also said he was having exactly the same problems whereas no one else I know had any problems!.Anyway, after much scratching of head with resetting the router to factory defaults etc the only thing left to test was a direct connection with the modem where all websites worked perfectly!So the problem is 100% the router! Even after a factory restore it still doesn't work with those websites and after talking to my friend it turns out he too has a tp-link router but a different model.
Region : Austria
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
I have a problem with the combination of the TP Link router and a samsung smart tv (Samsung UE46ES6300). Every thing works fine, but I can't show videos or images from a usb-hdd connected to the router (Media server is started)I can access the files with my windows pc and windows media-player. AND I can view content on the usb-hdd connected to the router, over allshareplay for windows and send it to the tv.But I want to show videos on the usb-hdd without my pc. I see the TP-Link Router as a source on allshareplay on the tv. When I click on it, there is a error message, that the request can't be executed.
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : WR1043ND
The router is not showing my external hard drive in the usb settings. The Hard drive is a seagate 7200rpm 1.5tb. The hard drive works just fine when plugged into my computer. I have tried NTFS and EXFAT. My 2gb usb drive in FAT32 shows up just fine. The external has its own power supply. Is there anything I am missing that would cause it to not work?
