I would like to authorize a friend in my house to access my wifi I was told to go to http://192.1.1 and enter the MAC address of my friend. However on the site I was unable to enter the information into the box - how can I authorize my friend to use my wifi?
View 1 RepliesI have 5508 controller in my lab. I am working on a project to set up a public internet but with some condition.
- User should able to connect to the SSID without any authentication.
- Once user will connec to the SSID it should redirect to an external URL which indicates terms and condition and email address field.
- User should enter his/her email address in email addrss filed and click I accept button.
- Once that is done then he/she is allowed to access internet.
We are not sure how can we achive this as I do not know what should be the return value for WLC to allow that user to go through or what should be the settings on the WLC to redirect to the page.
I have seen a settings on web authentication for external URL but I guess it is only for username passwor or Radius authentication. While in this case I do not want to use any authentication just an accept buttor or Decline button and all good to go.
A short background. Our corporate SSID is being migrated from using PEAPv0 to EAP-TLS. This restricts access only to company notebooks. Additionally we have barcode scanners which are used to inventory assets. Those devices are not able to use EAP-TLS as they cannot be integrated in the domain and being unable to do certificate based authentication.
As a workaround we planned to use another SSID with access to the same network but using PEAPv0 as authentication method, basically the same SSID but with a different name. As this naturally allows anyone to access the corporate network with a valid username/password I now wanted to add another step into the authentication process - the MAC of the device. I know I can do the filtering at the WLAN controller, but as it has a limited database as well as the fact that it is cumbersome to maintain the MAC list on all the controllers I thought I can do it over our ACS system.
I am now trying to accomplish the following: The user gets authenticated via the internal user store, which is succesful. Now I want to authorize the user via the MAC address, which is stored in the internal host store of the ACS, if access is granted or not.
For this I created the following policy:
Service Selection Policy -- (Rule based result selection)
-- (NDG:Device Type in All Device Types:Wireless And RADIUS-IETF:Called-Station-ID contains <SSID>) | Result: PEAP access
-- Default | Result: DenyAccess
Service PEAP access Identity: Internal Users -- (Single result selection) Authorization -- (Rule based result selection) -- Internal Hosts:HostIdentityGroup in All Groups:Valid_MACs
When I then try to access the wireless network I won't get authenticated. The error I get, when I look into the logs is: 15039 Selected Authorization Profile is DenyAccess
Is it not possible to use one identity store as "attribute database" for the other identity store?
Region : Ireland
Model : TD-W8960N
Hardware Version : V4
Firmware Version : TD-W8960N
ISP : Vodafone Ireland
I am having a rather annoying problem. I run a small hotel (just 3 floors) and my modem gives a strong enough signal to provide wireless access to everybody in the house however I'm finding that a lot of people, whilst they can connect to the modem, cannot browse online. Connection just times out when they open their browsers.Recently a guest gave me his laptop and asked me if I could do anything with it. I'm by no means an expert when it comes to this kind of thing so I chanced my arm by putting his MAC address into the CP's Wireless/MAC Filter page. He connected immediately and was able to go online much to my relief.
Thing is, I don't want to have to do this for every guest that comes through my door! Is there any way everybody who has a laptop can connect without me manually entering their MAC addresses? MAC restrict mode is set to 'disabled' but I thought that would allow everybody unrestricted access?
I have a user authentication issue with our WLAN deployment. My issue relates to the guest access WLAN. First a brief descrition of our setup. We have a local WLC in the branch office (5508) with two SSIDs configured, CorpNet for the internal network and GuestNet of external guest access. We also have a WLC (5508) in the DMZ to provide the guest access. We are using Cisco ISE server to authenticate guest users via a web portal.
The authentication process works as it should. An external client gets an IP in the DMZ and is redirected to the web portal to authenticate their account. When they do they are able to access and browse the internet. No problems. My issue is that if we disable their account (ie suspend or delete it) in ISE it does not seem to terminate the users session and they can continue to have internet access. What I would like to happen is that when the account is disabled in ISE then the associated device's access to the internet is removed.
I've just installed NCS. When trying to configure NCS for ACS Tacacs+ authentication, I receive the message below when trying to login to NCS. ACS records my login in the 'passed authentications' log. I am using ACS 4.2."No authorization information found for Remote Authenticated User. Please check the correctness of the associated task(s) and Virtual Domain(s) in the remote server". I used the following link to configure ACS for NCS, url...
View 3 Replies View RelatedI would like to configure RADIUS authentication and authorization in ASA 8.2 (ADSM 6.2) by configuring Cisco anyconnect VPN client connection profile.So the end result would be user enters his username, password and a token in any connect client, then the RADIUS server validates this information and sends the user attributes to ASA upon successful authentication.I would be grateful if i can get the step by step procedure to achieve this:The below is what iam trying to do:
1) Create an AAA server group.
2) Add the AAA server to this group (here its RADIUS).
3) create an LDAP-cisco ASA group mapping (for authorization)
3) Add a group policy and create IP pool. (We can add two types of group policies, one is internal and external. Not sure which one to select here).
4) create a any connect vpn client connection profile. Here we specify the created server group name, IP pool and group policy.(While creating a connection profile, it asks us to select an interface. As of now i have only one interface which is "inside". Not sure what the interface "outside" means).
I am getting Authorisation requests failed log entries for a user however there aren't any successful authentication logs.
The user would never be able to authenticate as it no longer exists in ACS (it was the user for someone who left the company 3-4 month ago)
The other wierd thing is that the caller-id is 0.0.0.0 BTW the NAS is a Cisco ASA firewall running 8.0(3)
i have configured wlc 2504 .in that i have configured two interfaces.one is guest, 2nd is internal user, the pblm when user try to connect with that contain ssid user not getting ip address,
i have connected only one link between core to wlc on port 1.for guest interface i used port 4.but no physical link.
I have tried to connect my Kindle to my E3000 without success. The Kindle shows that the router is there but after entering my password in the Kindle it will not connect. I tried going into Cisco Connect and enable "Guest" user. Again the Kindle shows that the router is there showing "Guest User" and after entering the password for the guest user it still will not connect. The Kindle does connect to the internet through a router that is shown - I have no idea whose router it is - but at least it proves that the Kindel will connect to the internet.
View 2 Replies View RelatedUser connects through a sonicwall device via SSL VPN and gets a static IP every time, despite what device they come from.
1. LDAP somehow supplies the IP from a DHCP server behind the sonicwall
2. The sonicwall somehow supplies the static IP on the interface that the net extender is connected to.
I am having an issue with connecting to the internet on my laptop. I have never had this problem before and after google-ing it, it appears that a lot of other people have the same issue. I had a message pop up that said something along the lines of 'another user on your network has the same ip address as your computer.' I lsot my connection, but was then able to re-connect. However, now I am permanently disconnected from the internet. I have reset my wireless adapter and that hasn't worked. I'm currently using my mum's computer and her internet is working fine.
View 17 Replies View RelatedI want to send a folder to other user in lan by ip address.
View 1 Replies View RelatedI am trying to configure ASA to assign same static ip address to certain user(User1) every time when he connect to network via AnyConnect client. We have Windows AD and use LDAP AAA server for authentication of VPN Remote Access users. I found in document "Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2" in section "Configuring an External Server for Security Appliance User Authorization" explanation and configured ASA and User Properties in AD on exectly same way:First, I assigned static ip address in properties menu(dial in section) of User1 in Active Directory. Then I created ldap attribute map where I mapped msRADIUSFrameIPAddressattribute to IETF-Radius-Framed-IP-Address attribute. At the end I applied this ldap attribute map to AAA server group LDAP.
Although I set this up, whenever I connect using User1 credentials from AD I still get ip address from vpn pool instead static ip address that I configured. In output of debug ldap 255 command I found line "msRADIUSFramedIPAddress: value = -1062718956" but not any line that prove mapping above mentioned attributes.It seems like mapping is not working.All AnyConnect users get parameters from defined internal group policy on ASA,including addresses form pool,dns server etc. I want that User1 get static ip address and inherit all other parameters from group policy.
I have a problem with LMS 4.2 user tracking.When I generate a report on all my network all mac address are ok but there is no Hostname/Ip address in the result, except for 2 equipments.the only difference between these 2 equipements and the rest of the network is that they are connected on a not routed vlan. All the other phones, computers are connected on a routed vlan.I have a Nexus 5k as core and 2960 as access. Routing between vlans is done with the NexusMy DNS server is ok and reachable.
View 2 Replies View RelatedI am having an issue with the user VPNs. For users connected via the AnyConnect VPN client, all of their Internet traffic goes out their local Internet connection, since I am using split tunneling. However, I need a specific public IP address to go through the VPN tunnel and out the DIA at the main office, rather than the user's local internet connection. I managed to have this IP address go through the tunnel to the ASA at the main office, but it appears that it gets blocked somewhere there, or maybe the return traffic gets blocked. I am using an ASA 5520 at the main office, with software version 8.3.
View 3 Replies View RelatedNew install discovered router and switches at same location with no issues. However when running an acquisition on those switches most fields are populated except the ip address of end host associated with port. Mac address, port speed, etc. but no ip address info on per port basis. Using snmp v3 if that makes a difference.
View 10 Replies View RelatedI just bought an N66U and started the process of flashing dd-wrt onto it via Asus' web GUI. I followed the steps on their wiki and it said 'complete!' I went to do another hard reset, as per the instructions, and no dice. I fear I may have bricked it
The next apparent step to me was to get it into recovery mode and either restore the asus fw or continue down that path with the ddwrt stuff, but I can't get it into restore mode
The documentation says the power LED is supposed to blink 'slowly' after holding the reset button + insert power adapter. I can't get to this stage.
Also, whenever I plug it in, the LED's on ports 2, 1, and WAN are solid for a few seconds. I don't know if it did this before, but I thought it could be an error code of some sort.
I have a running L2TP/IPsec VPN setup with authentification against a radius server (freeradius2 witch mysql). I would like to have some of my VPN users get a fixed IP address instead of the dynamically assigned IP Pool.
The radius server is returning the correct parameters, I think.
It´s a Cisco 892 Integrated Service Router. Code...
At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies View RelatedMy company requires each user dial-in must be a fixed IP; The old acs4 can,but I cannot find the same configration item in the ACS5.2
View 2 Replies View RelatedWe are running LMS Prime 4.2.3 on a Softappliance. We have a Cisco Switch behind a Non Cisco Layer-3 Device. In the end host tabe we see only the MAC-Addresses of the host connected to this switch. No IP-Address. The corresponding IP-Addresses are in the ARP-Table of this non Cisco Layer-3 Device. The arp table can also be read by snmp. Is it possible to get the ip address in the UT End Host Table in such an environment?
View 1 Replies View RelatedActually I have a lab with ACS 5.3 running with 802.1x, but when when the user is successfully authenticated, it's assigned and IP address from the DHCP server, is there a way to assign a static IP address depending of login username??
View 13 Replies View RelatedAt first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?
How i can get access lan computer drives with out entering login password
View 1 Replies View RelatedD-Link Router 615, with Xplornet Satellite Internet <-(internet sucks).
We got the router about 5 months ago and it has been good, few losses of connection and you have to reboot which is understandable. The internet is always random so if the router needs reset/reboot its no problem.
However about a month or so ago its started redirecting constantly once you put a website in the address bar. Its not always the same sites either. Sometimes its google for part of the day, some times the site wont work for a week. It redirects me all the time to the D-Link Router Log In, and no matter how i try to access the website im trying to go to, it redirects me to the D-Link.
Is it configurable to allow wifi user to user traffic on WLC 5508?
View 4 Replies View RelatedMy network topology consists of 3 directly connected routers where the central router contains sensitive data and i need to block traffic from ENTERING the LAN adjoined to that router. My issue is creating an access list to DENY traffic from entering the network connected to Fa0/1 but ALLOW traffic to exit from that network. I am using one class C network which is subnetted 7 times to provide me with the required LAN's.
View 2 Replies View RelatedWhen i try to enter the password for my N300 Belkin Router into my wifi connection setup in my computer it will not accept any letters, only numbers.
View 1 Replies View Relatedmy ISE 3315 is stuck in ISE 3315 stuck in INIT Entering runlevel: 3 when i connect a screen and keyboard i can only see this last message : ISE 3315 stuck in INIT Entering runlevel: 3 There is nothing after, i cannot login (no prompt) even after waiting 20 minutes with this message
I have no char return via serial cable depsite i was able to run initial setup from console (same cable, the DB9-DB9 provided, same serial config, same laptop)
Version ADE : ADE-OS-2.0 (2.6.18-238.1.1.el5PAE)
Version ISE : 1.1.0.665
Trying to connect (ipod touch) to DIR-655 with WPA2 enabled.
* Is there a way to connect without having to enter entire Long WPA2 Pre-Shared Key?
* why iPod has required me to enter security password several times - why would it keep losing the saved password I've entered?
- What is the PIN SETTING for on Device homepage? Is that a shortened key?
-I'd already added multiple times in past, too...
indows 7 Studio 1458 Crashes when entering Sleep Mode
View 2 Replies View RelatedI have reconfigure my Cisco 3825 for ssh after we lost the config sue to a power faliure. I have reconfigure the same way it was configured before and working properly.
when I try to access the router using Putty ssh, I get to the authentication screen but after entering uername and password (enable secrete and line password the same) i get access denied.
Below is the ssh and line configuration on the router. I have seen the pdf that has been recommended here at Netpro and have followed that document but still having problem:
[code]...