Cisco Switching/Routing :: 7000 Domain Controller IP To Be Allowed For DHCP Relay
May 2, 2013I have a Nexus 7000 Core Switch , and i need to allow the domain controller ip 10.x.x.x for DHCP relay on switch.
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 2921MS DHCP NACK With DHCP Relay?
Nov 11, 2012I have some DHCP trouble since I subnetted my network with a 2921. My clinets are in 172.16.2.0/23 and DHCP servers are in 172.16.5.0/24.Sometimes, randomly I guess, I get NACK from my DHCP server, and if I look into DHCP logs I got something like this:
15,11/09/12,09:52:27,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:28,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:29,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
[code]....
Cisco Switching/Routing :: 3550 / 2950 DHCP Relay Option To Router Handing Out DHCP
Apr 3, 2012Have a client wanting to hand out public ip addresses to all clients from a PFSense Firewall terminating the internet connection.
How do I allow the Cisco Switches currently in place, configured with private ip addresses in the 10.10.x.x ranges and Vlans, where the main 3550 layer 3 has defined dhcp scopes for each vlan, to relay dhcp requests from all vlans to the PFSense firewall?
I assume I would take off the currently defined dhcp scopes for the vlans and configure each vlan/switch with the ip helper address and specify the PFSense firewall and that Nat would have to be disabled onthe firewall?
Cisco Switching/Routing :: N7Ks / DHCP Relay On NX-OS?
Nov 30, 2011I am trying to get an understanding of some behaviour I am seeing on my N7Ks regarding DHCP relay.I have two identically configured Vlans interfaces both configured with the same two dhcp relay servers in the same order. The only difference between the two vlans is that one is HSRP active on the A side switch and the other is active on B side switch. All clients in Vlan136 (active on B side) are getting DHCP leases from the first of the two dhcp relay servers configured while all clients on Vlan 137 (active on A side) are getting DHCP leases from the second of the two dhcp relay servers. I would expect that all clients on both vlans would get leases from the first relay server configured unless that device was unavailable.
View 3 Replies View RelatedCisco Switching/Routing :: DHCP Relay On 3560
Apr 12, 2012Would like to impliment VLAN's on Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(25)SEB4...But I need a DHCP Realy to my Windows Based DHCP Server. How do I enable DHCP Relay on the 3560?
View 8 Replies View RelatedCisco Switching/Routing :: 2921 DHCP Relay Agent
Jun 30, 2012I have a 2921 with 4 segments: [code] My DHCP server is 172.16.5.2 and I need to serve clients from 172.16.2.0/23 by MAC address and only to that segment.
View 2 Replies View RelatedCisco Switching/Routing :: 3560X-24P-S Will Support LLDP / DHCP Relay
Feb 1, 2012I would like to know cisco 3560X-24P-S will support LLDP & DHCP relay .If it support which IOS feature is required to enbale these features.
View 1 Replies View RelatedCisco Switching/Routing :: 2960S - How To Setup DHCP Relay For VLan2
May 9, 2013Windows Server 2008 R2 has two DHCP scopes 192.168.1.x (for data) and 192.168.2.x (for VOIP). The Catalyst 2960-S has Vlan1 for the Data V LAN and V lan 2 for the VOIP network. How do I setup DHCP relay for Vlan2 to get their IPs from the scope on the Windows server?
Used to doing ip helper-address x.x.x.x in other Catalyst switches, but not available here.
Cisco Switching/Routing :: C3750 DHCP Relay Is No Longer Functioning For Client PCs
May 29, 2012I have upgraded a C3750G-12S-E to c3750-ipserviceslmk9-tar.122-55.SE5This switch is a distribution layer switch for one of my remote sites. it contains an ip helper-address on the site vlan's SVI.DHCP relay is no longer functioning for client PCs. Static address assignment allows full network functionality. I enabled debug ip dhcp server packet. [code] Actually I am betting you upgraded your IOS from something before 12.2(50)SE to 12.2(50)SE or later. We added enhancement CSCso19800 which will validate DHCP options when we are a relay agent.
View 1 Replies View RelatedCisco Switching/Routing :: Configure Two 3845 Routers To Act As DHCP Server / Relay?
Feb 14, 2012I am trying to configure two 3845 routers to act as dhcp server and dhcp relay. Clients are connected to the router that relays all dhcp requests to the vrf instance which is used to connect it to the router wich is running dhcp server.
Router1
ip vrf dhcp_dns
rd 8:1
int gi0/0
ip vrf forwarding dhcp_dns
ip address 192.168.200.5 255.255.255.248
[code]...
So far I can see dhcp requests coming from the R1 and dhcp server on R2 replies with the dhcp offer but PC is not getting any ip.
Cisco Switching/Routing :: Configure 3560 To Force Client To Get IP By DHCP Relay Server?
Jul 30, 2012How to configure cisco 3560 to force the client only can get ip by dhcp-relay server ?
The company i am working in has 5 vlans which have been set an lay-3 switch(3560), uses the dhcp-relay server .(in svi configuration: ip helper-address X.X.X.X) well , that works ok~
Now , I got my problem: I need to force the client only can get ip by dhcp-relay server, that means if anyone set static IP manunally , he can't really access to anywhere (to provent anyone set static IP with malignancy )
I know if a h3c router , how to set this configuration n svi configuration : dhcp relay security address-check enable )
the how to configure on a cisco 3560 ?
Cisco Switching/Routing :: ME3800 Stop Forward DHCP Relay Packets Immediately
Mar 29, 2012I faced with issue on ME3800. [code] With that configuration there is no problem with DHCP Relay packets.But if I add on interface #xconnect 82.199.1 19.1 77 encapsulation mpls it will stop forward DHCP relay packets immediately. All other traffic transfers without problem.
View 2 Replies View RelatedDNS / DHCP Domain Controller Addition
Feb 10, 2011I am having trouble adding a computer to the Domain Controller. I have a cable modem running into a di-524 router. The router has DHCP and DNS relay disabled. I set the LAN IP Address of the router to 192.168.2.1. The router is connected to a switch with 10 pc's and a server running 2003. The server has an IP Address of 192.168.2.2. I setup a DHCP server inside 2003 with a scope of 192.168.2.100-192.168.2.199. Under scope options the router is set to 192.168.2.1 and DNS Servers is set to 192.168.2.2 (the ip address of the domain controller). When I try to add the computer it cannot contact the domain controller. Is there something wrong with my DHCP config or DNS?
View 3 Replies View RelatedCisco Switching/Routing :: Nexus 7000 - Ip Dhcp Snooping Binding Table Is Empty?
Sep 14, 2010I've configured ip dhcp snooping on several vlans I want to monitor and the binding table doesn't seem to be building.eature DHCP is on, global ip dhcp snooping is enabled, VLAN snooping is enabled on the vlan's I want to monitor and my trusted interfaces are also configured. Alas no binding entries in the table! 7K is running 4.2(6).
View 1 Replies View RelatedCisco Switches :: Internet Routing With SG300-20 And Domain Controller
Nov 27, 2011I am trying to set up the SG300-52 and am struggling, I have a domain controller with IP address 192.168.0.1 I have a broadband router that is has a dynamc ip address. I have set up vlan1 aand vlan2
Vlan1 is getting its ip address from the domain which is 192.168.0.110
vlan2 is getting its ip from the broadband router.
I have setup Domain Name System in the Ip configuration tab
on Vlan1 I have a connected a dumb switch this connects all the computers in the local network. What I cannot get to work is the internet vlan.
who has setup up vlan routing with domain controller
Cisco Switching/Routing :: 2821 Multicast Routing Relay Basic
Mar 12, 2013I start configuring Cisco 2821 router for multicast . First short description and attached sheme explanation. Let we say I have small network with 100 users. One router and Cisco switch 3560. Two VLAN’s, one for data another for multicast. Data from internet works fine but now I want to connect multicast servers (or source of more multicast streams) from another subnet. Router have three interfaces.I expect there should be no problems with multicast configuration, but unfortunately it is not like I expect. What I did ?
First step: enable multicast routing
Second step: on both interfaces (Fe 0/1 and Fe 0/2) - ip pim sparse-mode
Third step: configure switch that users are connected to access port in VLAN 222 (temporary to see if multicast work)
When I start VLC on computer nothing happend. If I try to connect computer on same subnet where is source of multicast streams it works fine.What I am doing wrong ? Is there anything about routing ? All subnets are directly connected. RP is not needed if I have one router or ?
Cisco WAN :: DHCP Relay With ASR 9000
Feb 6, 2013I'm having a problem getting DHCP working with an ASR9k as shown in this document. I've successfully implemented very similar setups with some Cisco IOS routers, but the IOS XR on the ASR seems to be defeating me. Router A (happens to be a 3750)A DHCP/BOOTP/TFTP server, connected to router ARouter B - this is the ASR, running software version 4.0.3.Router A and B are connected by a layer-3 link.Router C (happens to be a Broadcom embedded router). It's connected to Router B by a VLAN trunk link.Device 1, this one needs to get its configuration by DHCP/BOOTP/TFTP. It's connected to Router C by a VLAN trunk link.Device 2, this one doesn't need any DHCP/BOOTP/TFTP. It's connected to Router C by a VLAN trunk link (its port is the same as Device 1's) Device 2 works great - it can ping the DHCP/BOOTP/TFTP server (and vice versa) and everything else it needs.
View 0 Replies View RelatedCisco Switching/Routing :: 3700 - Command Rejected / Bad VLAN Allowed List
Aug 24, 2012Im trying to simulate a switch in Gns3 and i use 16ESW module in a cisco 3700 router. why im getting this record after i try to filter which vlans pass through my trunk port:Router(config-if)#switchport trunk allowed vlan 2,3,4 Command rejected: Bad VLAN allowed list. You have to include all default vlans, e.g. 1-2,1002-1005.
View 6 Replies View RelatedCisco :: DHCP Relay And VLAN Identification
Oct 15, 2012I have a firewall that I want acting as a DHCP relay. This firewall has a number of VLAN interfaces serving clients. The DHCP relay destination is the IP address of a Windows 2012 Server running Microsoft DHCP which has multiple scopes configured, one for each client VLAN.What I'm finding confusing is how the DHCP will identify the client. Does the DHCP relay insert an identifier of some sort (opt. 54?) based on which VLAN the DHCPREQUEST comes from and then this identifier can be configured to be recognized on the DHCP server?
View 2 Replies View RelatedCisco WAN :: 1841 DHCP Relay Through GRE Over IPsec
Mar 17, 2011I have a data center with virtual desktops and other shared infrastructure serving remote sites, some of which are connected to the data center with GRE over IPsec.
IP address management including DHCP is centralized in my architecture, but I simply cannot figure out how to relay DHCP requests through GRE over IPsec to my DHCP server cluster. I am working with Cisco 800 series VPN peers, and the VPNs are terminated either on a 1841 or a Juniper SRX. Everything else is just fine and dandy, but DHCP is not forwarded across the GRE tunnel.
As a workaround I am forced to use local DHCP pools on the VPN peers, which is extra work from a management point of view, and also precludes static IP address assignment where a local DHCP pool is in a VRF. My LAN devices are mostly thin clients, so I don't care if DHCP stops working when the WAN link fails. As such local pools have no upsides, they are only a tremendous hassle.
My config is very basic, public WAN in global routing table and WAN + GRE tunnel in a VRF. NAT is not used. Here are the DHCP-related configs I have tried:ip helper-address on the LAN gateway, both with and without ip forward-protocol udp bootpcip dhcp pool with relay options configured
In every case, I can see the UDP broadcasts hit the LAN gateway, but relayed packets never arrive at the other GRE tunnel endpoint let alone the DHCP server.
Cisco Switches :: SGE 2000 - DHCP Relay
Oct 15, 2009I have defined several V LAN's and the corresponding IP Addresses on the SGE2000. The static routing works fine. On one V LAN there is a Windows 2003 DHCP Server which I have defined as DHCP Relay Server (Option 82), but no packets are relayed. Has anyone a functional setup, with dhcp relay?
View 8 Replies View RelatedCisco Routers :: SRP 527W - How To Configure DHCP Relay
Sep 12, 2012I know how to disable the DHCP on the SRP527W but i was wondering how do i configure DHCP relay to point to a network DHCP server.
View 1 Replies View RelatedCisco Switches :: DHCP Relay On A SGE2000 Switch?
Jun 25, 2012DHCP Relay on a SGE2000 switch.I have configured two VLANs on the switch, VLAN2 (192.168.10.x/24) and VLAN3 (192.168.9.x/24). I have the switch in Layer 3 mode. I have configured the DHCP relay server of 192.168.10.4 and the DHCP Interfaces as VLAN3. All of the IP Static Routes were generated by the switch.
If I put a client computer on a port that is Untagged VLAN 3 and try to get a DHCP address from the server on an Untagged VLAN 2 port I never get a response back.I have done some packet captures and here is what I have found:
I see the DHCP broadcast on the client computerI see the DHCP Request on the DHCP server coming from the IP assiged to the switch on VLAN 3 (192.168.9.254)I see the DHCP server respond with a DHCP OfferThe DHCP offer never gets to the client computer I can't seem to get a DHCP address to any system not on the same VLAN as the DHCP server. Option 82 is disable and I did try enabling it, which made no difference.
Cisco Switches :: SRW248G4P Supports DHCP Relay
Feb 12, 2013Does SRW248G4P supports dhcp relay?I don't see any option for it with firmware version 1.0.2.
View 1 Replies View RelatedCisco Routers :: WRVS4400Nv2 DHCP Relay On 2nd VLAN
Feb 24, 2011Here's what I'm trying to figure out:
My network is set up such that I have a Wireless Network in VLAN 1, which is the primary network that we use. The subnet is 10.5.1.x.
My goal is to set up a completely isolated Guest Wireless Network, however it would work best. What I am trying to do now is I created a seperate VLAN (VLAN 2, IP range 10.5.2.x) and turned on DHCP on the WRVS4400N. However, in the Guest Network, it is always picking up a 10.5.1.x IP which is handed out by the DHCP server (10.5.1.5, Win 2003) and still routing all of the traffic to/from our private network.
Here's What I have set:
Wireless>Security Settings>Guest Network (SSID 2)
Wireless Isolation (between SSID w/o VLAN): EnabledWireless Isolation (within SSID): EnabledSetup>LAN>VLAN 1
Router IP 10.5.1.1, WLAN IP 10.5.1.3DHCP Relay for 10.5.1.5Setup>LAN>VLAN 2
Router IP 10.5.2.1DHCP Enabled for 10.5.2.x subnetDHCP Relay option is grayed out (not sure why)Setup>Advanced Routing
Inter-VLAN Routing: Disabled
Any way to solve this would be fine. I just do not want traffic routing through our internal network. Ideally, if I could get the Windows server to hand out 10.5.2.x addresses, that would be perfect, but I'm not sure how to configure it for such.
How To Configure Dhcp Relay Agent And How It's Work
Jun 17, 2012how to configure dhcp relay agent and how it's work
View 1 Replies View RelatedDHCP Relay And Switch Port Settings?
May 7, 2011I am actually more of a 3Com guy than Cisco but I like to think I know my stuff and having just discovered this site I hope to join in as it looks a good place.I have a question about the general theroy underneath DHCP relay (IP Helper in the Cisco world I believe!)I've always put the DHCP server in VLAN1 only. A few weeks ago, I repatched the DHCP server in one of our offices (small site, single switch) into a different port by mistake. A few days ago I noticed (when doing something entirely unrelated) that I had left it in a port on both VLANs meant for PC's/phones. So, untagged on VLAN1, tagged on the voice VLAN. It had continued to work properly all that time however.By contrast, at a larger site, a new DHCP server came online and was put on a switch elsewhere in the building and was also put into a port on both VLANs - however things didn't work at all - of course we noticed immediately and changed the port setting to VLAN1 only, and it came back.In the second example, the server was on a different switch to where the main L3 switch for the Voice VLAN was (which also does the DHCP relay), and was connected over a fibre trunk link.Is there any reason why it should work on a single switch on a port on both VLANs, but not when connected over a trunk link? The server does not understand tagging. In the case where it worked, the phones were getting an IP from the correct scope; so the relay obviously must have been working with the server issuing an address based on the GIADDR field.
View 2 Replies View RelatedCisco Switching/Routing :: 2125 Wireless Controller Without Anchor Controller Just Using Existing Hardware
Dec 6, 2012I am looking to configure a wired and wireless guest network. I have industrial barcode scanners that connect to one SSID and then there is the business network on the office SSID (no vlan seperation for these devices just different SSIDs). There is not really a need to seperate the business network from the scanners in any case. However, there are needs for a guest network and this needs to be seperated. At the bare minumum I would like to have the wireless guest network. Here is what I have: 2125 Wireless LAN controller managing 18 LAPs (1 indoor and 17 outdoors)Cisco Cat 2950 switches (2 x 24 port and soon to be replaced with 2 x 48 port 2960's with 802.1x capability) Sonicwall TZ210 firewallOne existing wired and trunked vlan for PLC infrastructure. One ESXi hosting Windows server guests (soon to be 2 with vMotion) The reason for the wired guest access network is tp prevent anyone from plugging into the wall jack in the office with thier home laptops or anyone else from being on the same subnet as our domain machines. Granted they would be unathenticaed but there would be no layer 2 seperation and that is what I think would be best.
How would I go about doing this on the wireless controller without an anchor controller just using my existing hardware? I would like to have the Guest SSID only availible in the front office. Is it possible to offer a guest network while still servicing the business network SSID on the same access point? Then might I be able to have the guest network be treated as it should at the controller? However this might present another issue altogether as the guest traffic will be over the same wire as the business SSID until it hits the controller for management.
Cisco Switching/Routing :: Catalyst 2955 Relay Connector Information
Feb 6, 2012I come across to use the Catalyst Switch 2955 and it has two Relay Connector with one Major (MAJ) and one Minor (MIN) as below picture.There is command line to trigger these two Relay Connectors. As below command to set the Relay Connector to minor for monitoring the power supply: alarm facility power-supply relay minor
1. My questions are when there is power-supply faulty, the Minor Relay Connctor (right picture) will be short-circuited, right?
2. If we connector the two ports (ports 4 & 5 at the left picture) with a normal cable to drive an Alram Bell (in short-circuiled or closed loop situation), do we need an external power supply to the Alram Bell? Or there will be power supply from Catalyst 2955 to the Alram Bell as well?
Cisco Switching/Routing :: Relay Agent And Forwarding Query On 2960?
Nov 23, 2011I need support on understanding and configuring dhcp relay agent And forwarding. Lets say a bunch of TCP/IP devices required a dhcp ip where it is installed on a perticular server to run so. The server having dhcp pool where it provide the devices with IP addresses as he recieve queries from them requesting to release their addresses. On 2960 switch no dhcp configured and ports assigned under specific vlan under those devices. The issue here, if power goes down and booting process started, the devices started to ask the server for ip add and it takes too much time and somehow it does not take ip and those request kind a dropped. As the minimum requirement is to configure relay agent on the switch and forwarding and multicast?
View 7 Replies View RelatedCisco VPN :: 880 / 1800 / 2960 - DHCP Relay Through IPSEC VPN Tunnel
Mar 11, 2011Here is the high-level question, please only respond if you have a conclusive answer with documentation to back it up. It seems simple, but all my research on forums and things have been confusing and conflicting.
When "ip helper-address" is used to enable the dhcp-relay function, will the DHCP packets get relayed through the VPN tunnel (if thats where the DHCP server is?) This question applies to Cisco IOS Routers and VPN appliances which have a Site-to-Site IPSEC VPN Tunnel to a place that hosts a DHCP server.
I'm using the Cisco 880 and 1800 series routers. I've already got DHCP relaying through IPSEC tunnels, but so far I've only set it up where my 2960 switch relays the DHCP messages to the VPN router on site (which is a separate device). I want to know if the router can pickup and relay through it's own tunnel natively.
Cisco Switches :: Getting DHCP Relay To Function Properly On SG300-20 Switch
Dec 5, 2012I am having some issues with getting DHCP Relay to fuction properly over our SG300-20 Switch.Out current layout is as follows. Hanging off the SG300-20 are a pair of Clustered Checkpoint Gateways with VLAN'ed interfaces in Both of our 2 VLANs, a 3COM 4200G In VLAN1 which has the DHCP server (And all the other Servers) connected to it, and a Pair of HP Procurve 2520's Stacked in VLAN 2 to provide PoE for our Phones/connectivity for our PCs.The problem is I cannot get the DHCP Relay to fuction from VLAN 1 to VLAN 2. If I assign an address in VLAN 2 manually to a device connected to the Procurves, everything works fine. I am able to reach both VLAN 1 and VLAN 2, but DHCP aquisition fails even if the device is connected directly to a port assigned to VLAN 2 on the SG300. The SG300 is running at Layer 3 currently also.
Here is a copy of the running config:
--------------------------------------------------------------------------------------------------------------
switch4db24f#show running-config
vlan database
vlan 2
exit
interface range gi8,gi16
switchport default-vlan tagged
[code]....
Cisco Security :: 7200 - No IP Bootp Server On A DHCP Relay Agent?
Mar 18, 2003I have a Cisco 7200 acting as the DHCP relay agent on my network. From a security standpoint, I want to disable the bootp server, with 'no ip bootp server'. What bearing, if any, does 'no ip bootp server' have on DHCP activity?
View 8 Replies View Related