Cisco Routers :: SRP 527W - How To Configure DHCP Relay
Sep 12, 2012I know how to disable the DHCP on the SRP527W but i was wondering how do i configure DHCP relay to point to a network DHCP server.
View 1 Replies
ADVERTISEMENT
Cisco Switching/Routing :: Configure Two 3845 Routers To Act As DHCP Server / Relay?
Feb 14, 2012I am trying to configure two 3845 routers to act as dhcp server and dhcp relay. Clients are connected to the router that relays all dhcp requests to the vrf instance which is used to connect it to the router wich is running dhcp server.
Router1
ip vrf dhcp_dns
rd 8:1
int gi0/0
ip vrf forwarding dhcp_dns
ip address 192.168.200.5 255.255.255.248
[code]...
So far I can see dhcp requests coming from the R1 and dhcp server on R2 replies with the dhcp offer but PC is not getting any ip.
How To Configure Dhcp Relay Agent And How It's Work
Jun 17, 2012how to configure dhcp relay agent and how it's work
View 1 Replies View RelatedCisco Switching/Routing :: Configure 3560 To Force Client To Get IP By DHCP Relay Server?
Jul 30, 2012How to configure cisco 3560 to force the client only can get ip by dhcp-relay server ?
The company i am working in has 5 vlans which have been set an lay-3 switch(3560), uses the dhcp-relay server .(in svi configuration: ip helper-address X.X.X.X) well , that works ok~
Now , I got my problem: I need to force the client only can get ip by dhcp-relay server, that means if anyone set static IP manunally , he can't really access to anywhere (to provent anyone set static IP with malignancy )
I know if a h3c router , how to set this configuration n svi configuration : dhcp relay security address-check enable )
the how to configure on a cisco 3560 ?
Cisco Routers :: WRVS4400Nv2 DHCP Relay On 2nd VLAN
Feb 24, 2011Here's what I'm trying to figure out:
My network is set up such that I have a Wireless Network in VLAN 1, which is the primary network that we use. The subnet is 10.5.1.x.
My goal is to set up a completely isolated Guest Wireless Network, however it would work best. What I am trying to do now is I created a seperate VLAN (VLAN 2, IP range 10.5.2.x) and turned on DHCP on the WRVS4400N. However, in the Guest Network, it is always picking up a 10.5.1.x IP which is handed out by the DHCP server (10.5.1.5, Win 2003) and still routing all of the traffic to/from our private network.
Here's What I have set:
Wireless>Security Settings>Guest Network (SSID 2)
Wireless Isolation (between SSID w/o VLAN): EnabledWireless Isolation (within SSID): EnabledSetup>LAN>VLAN 1
Router IP 10.5.1.1, WLAN IP 10.5.1.3DHCP Relay for 10.5.1.5Setup>LAN>VLAN 2
Router IP 10.5.2.1DHCP Enabled for 10.5.2.x subnetDHCP Relay option is grayed out (not sure why)Setup>Advanced Routing
Inter-VLAN Routing: Disabled
Any way to solve this would be fine. I just do not want traffic routing through our internal network. Ideally, if I could get the Windows server to hand out 10.5.2.x addresses, that would be perfect, but I'm not sure how to configure it for such.
Cisco Switching/Routing :: 2921MS DHCP NACK With DHCP Relay?
Nov 11, 2012I have some DHCP trouble since I subnetted my network with a 2921. My clinets are in 172.16.2.0/23 and DHCP servers are in 172.16.5.0/24.Sometimes, randomly I guess, I get NACK from my DHCP server, and if I look into DHCP logs I got something like this:
15,11/09/12,09:52:27,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:28,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:29,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
[code]....
Cisco Switching/Routing :: 3550 / 2950 DHCP Relay Option To Router Handing Out DHCP
Apr 3, 2012Have a client wanting to hand out public ip addresses to all clients from a PFSense Firewall terminating the internet connection.
How do I allow the Cisco Switches currently in place, configured with private ip addresses in the 10.10.x.x ranges and Vlans, where the main 3550 layer 3 has defined dhcp scopes for each vlan, to relay dhcp requests from all vlans to the PFSense firewall?
I assume I would take off the currently defined dhcp scopes for the vlans and configure each vlan/switch with the ip helper address and specify the PFSense firewall and that Nat would have to be disabled onthe firewall?
Cisco Routers :: Do DHCP Relay Across RV220W Site To Site VPN?
Dec 23, 2011I have two Cisco RV220W routers and I would like to realy DHCP from the home office to the remote office accross the IPsec Tunnel. Is this possible and if so how?
I have already gone into the IPv4 LAN (Local Network) settings on the remote router and set the DHCP mode to "DHCP Relay" providing the internal ip address of the home office router as the remote DHCP server.
Cisco WAN :: DHCP Relay With ASR 9000
Feb 6, 2013I'm having a problem getting DHCP working with an ASR9k as shown in this document. I've successfully implemented very similar setups with some Cisco IOS routers, but the IOS XR on the ASR seems to be defeating me. Router A (happens to be a 3750)A DHCP/BOOTP/TFTP server, connected to router ARouter B - this is the ASR, running software version 4.0.3.Router A and B are connected by a layer-3 link.Router C (happens to be a Broadcom embedded router). It's connected to Router B by a VLAN trunk link.Device 1, this one needs to get its configuration by DHCP/BOOTP/TFTP. It's connected to Router C by a VLAN trunk link.Device 2, this one doesn't need any DHCP/BOOTP/TFTP. It's connected to Router C by a VLAN trunk link (its port is the same as Device 1's) Device 2 works great - it can ping the DHCP/BOOTP/TFTP server (and vice versa) and everything else it needs.
View 0 Replies View RelatedCisco :: DHCP Relay And VLAN Identification
Oct 15, 2012I have a firewall that I want acting as a DHCP relay. This firewall has a number of VLAN interfaces serving clients. The DHCP relay destination is the IP address of a Windows 2012 Server running Microsoft DHCP which has multiple scopes configured, one for each client VLAN.What I'm finding confusing is how the DHCP will identify the client. Does the DHCP relay insert an identifier of some sort (opt. 54?) based on which VLAN the DHCPREQUEST comes from and then this identifier can be configured to be recognized on the DHCP server?
View 2 Replies View RelatedCisco WAN :: 1841 DHCP Relay Through GRE Over IPsec
Mar 17, 2011I have a data center with virtual desktops and other shared infrastructure serving remote sites, some of which are connected to the data center with GRE over IPsec.
IP address management including DHCP is centralized in my architecture, but I simply cannot figure out how to relay DHCP requests through GRE over IPsec to my DHCP server cluster. I am working with Cisco 800 series VPN peers, and the VPNs are terminated either on a 1841 or a Juniper SRX. Everything else is just fine and dandy, but DHCP is not forwarded across the GRE tunnel.
As a workaround I am forced to use local DHCP pools on the VPN peers, which is extra work from a management point of view, and also precludes static IP address assignment where a local DHCP pool is in a VRF. My LAN devices are mostly thin clients, so I don't care if DHCP stops working when the WAN link fails. As such local pools have no upsides, they are only a tremendous hassle.
My config is very basic, public WAN in global routing table and WAN + GRE tunnel in a VRF. NAT is not used. Here are the DHCP-related configs I have tried:ip helper-address on the LAN gateway, both with and without ip forward-protocol udp bootpcip dhcp pool with relay options configured
In every case, I can see the UDP broadcasts hit the LAN gateway, but relayed packets never arrive at the other GRE tunnel endpoint let alone the DHCP server.
Cisco Switches :: SGE 2000 - DHCP Relay
Oct 15, 2009I have defined several V LAN's and the corresponding IP Addresses on the SGE2000. The static routing works fine. On one V LAN there is a Windows 2003 DHCP Server which I have defined as DHCP Relay Server (Option 82), but no packets are relayed. Has anyone a functional setup, with dhcp relay?
View 8 Replies View RelatedCisco Routers :: How To Access SRP 527W
Sep 23, 2012A SRP 527W is responsible for the data network in my office. But I am not able to access it. I use traceroute to confirm its IP address is “10.0.0.138”. I am not able to access / open 10.0.0.138 with my web browser. I even can not access the same address with telnet. So is there any solution to access the SRP 527W?
View 10 Replies View RelatedCisco Routers :: SRP 527w Is Not Accessible
Jul 28, 2010I recently ( three days ago ) purchased a SRP 527w and have been using it in a mixed Mac/Windows network. The setup is currently primarily using defaults apart from enabling logging. While I was still able to access the internet with some applications, accessing web content appears to have blocked after approximately 48 hours uptime.
No web pages using port 80 were available and that included the router web interface. The router would respond to ping only.
On a different note. I have to say that I find it very strange that the supplied documentation doesn't advise setting up the router using the admin login. It was only after reading one of the comments on this site that I was alerted to this security problem. I also find it rather annoying that I appear to have to purchase additional support merely to be able to download firmware updates which are designed to give the device improved functionality.
Cisco Routers :: SRP 527w DMZ Not Working?
Nov 30, 2011I spent three days trying to get the DMZ function in my newly purchased SRP 527w Small Business Router to work at no avail.All I want is for the router to place the 192.168.1.200 IP/Machine in the DMZ.I have configured the ports in the router as TRUSTED and there are no other conflicting rules but it doesn't work still.I tried upgrading to the latest firmware "SRP520W-1.1.24" and it didn't work either.
View 11 Replies View RelatedCisco Switching/Routing :: N7Ks / DHCP Relay On NX-OS?
Nov 30, 2011I am trying to get an understanding of some behaviour I am seeing on my N7Ks regarding DHCP relay.I have two identically configured Vlans interfaces both configured with the same two dhcp relay servers in the same order. The only difference between the two vlans is that one is HSRP active on the A side switch and the other is active on B side switch. All clients in Vlan136 (active on B side) are getting DHCP leases from the first of the two dhcp relay servers configured while all clients on Vlan 137 (active on A side) are getting DHCP leases from the second of the two dhcp relay servers. I would expect that all clients on both vlans would get leases from the first relay server configured unless that device was unavailable.
View 3 Replies View RelatedCisco Switching/Routing :: DHCP Relay On 3560
Apr 12, 2012Would like to impliment VLAN's on Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(25)SEB4...But I need a DHCP Realy to my Windows Based DHCP Server. How do I enable DHCP Relay on the 3560?
View 8 Replies View RelatedCisco Switches :: DHCP Relay On A SGE2000 Switch?
Jun 25, 2012DHCP Relay on a SGE2000 switch.I have configured two VLANs on the switch, VLAN2 (192.168.10.x/24) and VLAN3 (192.168.9.x/24). I have the switch in Layer 3 mode. I have configured the DHCP relay server of 192.168.10.4 and the DHCP Interfaces as VLAN3. All of the IP Static Routes were generated by the switch.
If I put a client computer on a port that is Untagged VLAN 3 and try to get a DHCP address from the server on an Untagged VLAN 2 port I never get a response back.I have done some packet captures and here is what I have found:
I see the DHCP broadcast on the client computerI see the DHCP Request on the DHCP server coming from the IP assiged to the switch on VLAN 3 (192.168.9.254)I see the DHCP server respond with a DHCP OfferThe DHCP offer never gets to the client computer I can't seem to get a DHCP address to any system not on the same VLAN as the DHCP server. Option 82 is disable and I did try enabling it, which made no difference.
Cisco Switches :: SRW248G4P Supports DHCP Relay
Feb 12, 2013Does SRW248G4P supports dhcp relay?I don't see any option for it with firmware version 1.0.2.
View 1 Replies View RelatedDHCP Relay And Switch Port Settings?
May 7, 2011I am actually more of a 3Com guy than Cisco but I like to think I know my stuff and having just discovered this site I hope to join in as it looks a good place.I have a question about the general theroy underneath DHCP relay (IP Helper in the Cisco world I believe!)I've always put the DHCP server in VLAN1 only. A few weeks ago, I repatched the DHCP server in one of our offices (small site, single switch) into a different port by mistake. A few days ago I noticed (when doing something entirely unrelated) that I had left it in a port on both VLANs meant for PC's/phones. So, untagged on VLAN1, tagged on the voice VLAN. It had continued to work properly all that time however.By contrast, at a larger site, a new DHCP server came online and was put on a switch elsewhere in the building and was also put into a port on both VLANs - however things didn't work at all - of course we noticed immediately and changed the port setting to VLAN1 only, and it came back.In the second example, the server was on a different switch to where the main L3 switch for the Voice VLAN was (which also does the DHCP relay), and was connected over a fibre trunk link.Is there any reason why it should work on a single switch on a port on both VLANs, but not when connected over a trunk link? The server does not understand tagging. In the case where it worked, the phones were getting an IP from the correct scope; so the relay obviously must have been working with the server issuing an address based on the GIADDR field.
View 2 Replies View RelatedCisco Routers :: 527W - How To Disable LAN Interfaces
Mar 11, 2012Just wanting to know if there is a way to disable unused LAN interfaces of these Cisco 527W routers. Looking through the configuration interface it doesnt seem to have an option for this. Also I am having trouble logging into the router via SSH or Telent . When I put the password in it says "access denied" . But password works for the web interface..
View 5 Replies View RelatedCisco Routers :: SRP 527w Cannot Access Web Interface
Aug 3, 2011Our SRP527W is working - internet on and SIP phones on but I cannot access the Web interface anymore. When I try to login from any of the machines around I get a "not responding" message.
Before I get to the stage where I have to reset the whole thing and re-do the configuration completely ? I tried powering off and powering on as well as restarting all the switches etc... but I get the same result.
Cisco Routers :: SRP 527w - ADSL Disconnections
May 12, 2011at our office we've recently upgrade from a old consumer-grade linksys wag200g modem/router/ap to the Cisco SRP527w. The Cisco is suffering from very frequent ADSL disconnections. These disconnections happens when there is some traffic to the internet and they seem to don't affect the LAN routing: on the weekends there are no disconnections at all while during the working hours there may be disconnections every FEW MINUTES making this router unusable. Often these disconnections force us to do a full reboot of the router.
Firmare version is SRP520W-1.1.19, the latest. ADSL line is a 6Mbps/640kbps. Noise margin is about 11dB for downstream and 20dB for upstream.
No voice line is used and therefore they are both disabled. 2 wireless network are active. The old linksys was (and is) working correctly, no adsl disconnections at all. Never.
Cisco Routers :: Configure DHCP Option 150 On RV220?
May 3, 2012Is it possible to configure DHCP option 150 on the RV220? I have a Cisco 7940 IP phone that is trying to connect back to my office. The VPN is up and I can ping the relevant server but I can't see any way to configure the DHCP option.
View 5 Replies View RelatedCisco Routers :: RV042 / How To Configure Some DHCP Option
Jun 19, 2012I have a RV042 VPN Router with the latest firmware v4.2.1.02.This Router is connected to the main site by a VPN Tunnel.
Now, I like to configure some DHCP Option so I can put a IP Phone behind the RV042. The IP Phone should receive a IP by DHCP from the RV042 and of course, the IP of the Call Manager with the Option 150.
I can configure DHCP and it works fine but I can't find where I have or can configure Option 150.
Cisco Switching/Routing :: 2921 DHCP Relay Agent
Jun 30, 2012I have a 2921 with 4 segments: [code] My DHCP server is 172.16.5.2 and I need to serve clients from 172.16.2.0/23 by MAC address and only to that segment.
View 2 Replies View RelatedCisco VPN :: 880 / 1800 / 2960 - DHCP Relay Through IPSEC VPN Tunnel
Mar 11, 2011Here is the high-level question, please only respond if you have a conclusive answer with documentation to back it up. It seems simple, but all my research on forums and things have been confusing and conflicting.
When "ip helper-address" is used to enable the dhcp-relay function, will the DHCP packets get relayed through the VPN tunnel (if thats where the DHCP server is?) This question applies to Cisco IOS Routers and VPN appliances which have a Site-to-Site IPSEC VPN Tunnel to a place that hosts a DHCP server.
I'm using the Cisco 880 and 1800 series routers. I've already got DHCP relaying through IPSEC tunnels, but so far I've only set it up where my 2960 switch relays the DHCP messages to the VPN router on site (which is a separate device). I want to know if the router can pickup and relay through it's own tunnel natively.
Cisco Routers :: SRP 527W - Ping External WAN Port?
Jan 14, 2013As a raw test it is handy for us to ping externally the WAN port of the SRP 527W. How we configure the SRP 527W to allow this? FYI we have the inbulit SRP firewall enabled.
View 2 Replies View RelatedCisco Routers :: SRP-527W Will Not Recognize MF112 USB Dongle
Mar 19, 2012I have a pair of SRP-527W routers running latest firmware V 1.01.26. Everthing works fine. Except.... Have purchased a ZTE MF112 usb dongle as backup to the ADSL but router refuses to recognise it. In mobile network status shows as "Unable to Detect USB Mobile Modem".
Have tried a second dongle of the same type, cold reboot of router etc... but nothing. It is supposed to be supported in this release of firmware...?
Cisco Routers :: 527W-U Routed Subnet / Is One-to-one NAT Supported
Jan 15, 2013we are trying to configure one to one NAT translations on a Cisco 527W-U, but are having some problems. We are running firmware version 1.2.4 (003) on the 527.
The DSL line is assigned with a /29 address range x.x.x.64 /29?
The DSL WAN interface picks up x.x.x.65 /32 from the Radius server. We are using the default private IP address range 192.168.15.0 /24 on the LAN (VLAN1), and can get to the internet ok with a PC connected to the LAN.
However when we try to set up a public IP address in the same range (eg x.x.x.66 /29) on VLAN1 (with x.x.x.67 on the PC) it will not connect. (won't allow us to configure an address from the same range as the WAN on a new VLAN interface).
we would want to be able to do one to one NAT translations eg x.x.x.66 on the outside to 192.168.15.2 inside, x.x.x.67 outside to 192.168.15.3 inside etc, but this will not either. We have tried this on a normal IOS router (887) and it worked ok. We have also tried the same on a small DSL router / modem product similar to the 527 from another manufacturer and it worked ok on that, but we wanted it to be able to work on the 527.
We have tried the NAT bypass feature without any success, reading several other discussion forums on this website leads me to believe that one to one NAT is not supported on this equipment at the moment, or at least not at the current firmware release.
One work around would be to just assign a /32 to the WAN interface on the DSL and route statically to a different routed subnet configured on the LAN, however we were wanting to avoid having to do that if possible.
Cisco Switches :: Getting DHCP Relay To Function Properly On SG300-20 Switch
Dec 5, 2012I am having some issues with getting DHCP Relay to fuction properly over our SG300-20 Switch.Out current layout is as follows. Hanging off the SG300-20 are a pair of Clustered Checkpoint Gateways with VLAN'ed interfaces in Both of our 2 VLANs, a 3COM 4200G In VLAN1 which has the DHCP server (And all the other Servers) connected to it, and a Pair of HP Procurve 2520's Stacked in VLAN 2 to provide PoE for our Phones/connectivity for our PCs.The problem is I cannot get the DHCP Relay to fuction from VLAN 1 to VLAN 2. If I assign an address in VLAN 2 manually to a device connected to the Procurves, everything works fine. I am able to reach both VLAN 1 and VLAN 2, but DHCP aquisition fails even if the device is connected directly to a port assigned to VLAN 2 on the SG300. The SG300 is running at Layer 3 currently also.
Here is a copy of the running config:
--------------------------------------------------------------------------------------------------------------
switch4db24f#show running-config
vlan database
vlan 2
exit
interface range gi8,gi16
switchport default-vlan tagged
[code]....
Cisco Switching/Routing :: 3560X-24P-S Will Support LLDP / DHCP Relay
Feb 1, 2012I would like to know cisco 3560X-24P-S will support LLDP & DHCP relay .If it support which IOS feature is required to enbale these features.
View 1 Replies View RelatedCisco Security :: 7200 - No IP Bootp Server On A DHCP Relay Agent?
Mar 18, 2003I have a Cisco 7200 acting as the DHCP relay agent on my network. From a security standpoint, I want to disable the bootp server, with 'no ip bootp server'. What bearing, if any, does 'no ip bootp server' have on DHCP activity?
View 8 Replies View Related
