I have a pair of SRP-527W routers running latest firmware V 1.01.26. Everthing works fine. Except.... Have purchased a ZTE MF112 usb dongle as backup to the ADSL but router refuses to recognise it. In mobile network status shows as "Unable to Detect USB Mobile Modem".
Have tried a second dongle of the same type, cold reboot of router etc... but nothing. It is supposed to be supported in this release of firmware...?
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : aircel,idea
I bought this router just today, but it cant recognize my huawei e303c 3g modem.i've upgraded the firmware. This router supports the dongle or not?
A SRP 527W is responsible for the data network in my office. But I am not able to access it. I use traceroute to confirm its IP address is “10.0.0.138”. I am not able to access / open 10.0.0.138 with my web browser. I even can not access the same address with telnet. So is there any solution to access the SRP 527W?
View 10 Replies View RelatedI recently ( three days ago ) purchased a SRP 527w and have been using it in a mixed Mac/Windows network. The setup is currently primarily using defaults apart from enabling logging. While I was still able to access the internet with some applications, accessing web content appears to have blocked after approximately 48 hours uptime.
No web pages using port 80 were available and that included the router web interface. The router would respond to ping only.
On a different note. I have to say that I find it very strange that the supplied documentation doesn't advise setting up the router using the admin login. It was only after reading one of the comments on this site that I was alerted to this security problem. I also find it rather annoying that I appear to have to purchase additional support merely to be able to download firmware updates which are designed to give the device improved functionality.
I spent three days trying to get the DMZ function in my newly purchased SRP 527w Small Business Router to work at no avail.All I want is for the router to place the 192.168.1.200 IP/Machine in the DMZ.I have configured the ports in the router as TRUSTED and there are no other conflicting rules but it doesn't work still.I tried upgrading to the latest firmware "SRP520W-1.1.24" and it didn't work either.
View 11 Replies View RelatedJust wanting to know if there is a way to disable unused LAN interfaces of these Cisco 527W routers. Looking through the configuration interface it doesnt seem to have an option for this. Also I am having trouble logging into the router via SSH or Telent . When I put the password in it says "access denied" . But password works for the web interface..
View 5 Replies View RelatedOur SRP527W is working - internet on and SIP phones on but I cannot access the Web interface anymore. When I try to login from any of the machines around I get a "not responding" message.
Before I get to the stage where I have to reset the whole thing and re-do the configuration completely ? I tried powering off and powering on as well as restarting all the switches etc... but I get the same result.
at our office we've recently upgrade from a old consumer-grade linksys wag200g modem/router/ap to the Cisco SRP527w. The Cisco is suffering from very frequent ADSL disconnections. These disconnections happens when there is some traffic to the internet and they seem to don't affect the LAN routing: on the weekends there are no disconnections at all while during the working hours there may be disconnections every FEW MINUTES making this router unusable. Often these disconnections force us to do a full reboot of the router.
Firmare version is SRP520W-1.1.19, the latest. ADSL line is a 6Mbps/640kbps. Noise margin is about 11dB for downstream and 20dB for upstream.
No voice line is used and therefore they are both disabled. 2 wireless network are active. The old linksys was (and is) working correctly, no adsl disconnections at all. Never.
I know how to disable the DHCP on the SRP527W but i was wondering how do i configure DHCP relay to point to a network DHCP server.
View 1 Replies View RelatedAs a raw test it is handy for us to ping externally the WAN port of the SRP 527W. How we configure the SRP 527W to allow this? FYI we have the inbulit SRP firewall enabled.
View 2 Replies View Relatedwe are trying to configure one to one NAT translations on a Cisco 527W-U, but are having some problems. We are running firmware version 1.2.4 (003) on the 527.
The DSL line is assigned with a /29 address range x.x.x.64 /29?
The DSL WAN interface picks up x.x.x.65 /32 from the Radius server. We are using the default private IP address range 192.168.15.0 /24 on the LAN (VLAN1), and can get to the internet ok with a PC connected to the LAN.
However when we try to set up a public IP address in the same range (eg x.x.x.66 /29) on VLAN1 (with x.x.x.67 on the PC) it will not connect. (won't allow us to configure an address from the same range as the WAN on a new VLAN interface).
we would want to be able to do one to one NAT translations eg x.x.x.66 on the outside to 192.168.15.2 inside, x.x.x.67 outside to 192.168.15.3 inside etc, but this will not either. We have tried this on a normal IOS router (887) and it worked ok. We have also tried the same on a small DSL router / modem product similar to the 527 from another manufacturer and it worked ok on that, but we wanted it to be able to work on the 527.
We have tried the NAT bypass feature without any success, reading several other discussion forums on this website leads me to believe that one to one NAT is not supported on this equipment at the moment, or at least not at the current firmware release.
One work around would be to just assign a /32 to the WAN interface on the DSL and route statically to a different routed subnet configured on the LAN, however we were wanting to avoid having to do that if possible.
We have a Cisco SRP 527W router that was not showing up on the LAN. so we tried a Factory Default reset but it seems to be dead.
The power light is flashing constantly,the 4 LAN light are constantly on,the DSL Data light comes on for 1 sec when device is powered up.
i have tried connecting directly to a PC, the NIC reports as network cable unplugged.i have tried the (power on device, hold down reset button, power of after 30 sec, power on after 5 sec, release reset button after 5 sec) but still "network cable unplugged".
the firmware flash utility will not find the NIC the device is connected to.the router is less than a year old, is there a fix or is it a warranty replacement ?
I have recently acquired one of these routers. I thought, being a Cisco product, it would be the bee's knees. It is not. After finally getting the network set up - no mean feat, although I do not claim any expertise, but had to resort to some other network management software to finally get it all running - the router drops either the WAN connection or the wireless connection many times a day. The laptops often show as being connected to the network/router, but are unable to access either the internet, or the router via the browser. Re-booting the router is the fix, but, hey, I can achieve that sort of performance with any old $20 router - none of my old Net gear routers was this troublesome.
The permanent fix would seem to be a firmware upgrade, but guess what? The only options available under the "Administration" tab are time setting and switch settings - no firmware upgrade. The supplied firmware is 1.01.09(001) Apr 7 2010. Why these products are supplied, as new, without the latest firmware installed beats me, but there you go.
The router recognizes the Sierra 312U modem but does not connect to Telstra. The modem is on a monthly plan (not pre-paid) and I have tried APN settings such as internet.telstra and internet.bigpond. The configuration is set to manual and the correct user id and password have been entered. explain the "daemon.err rc: start -1 port.... fail (-8)" in the log? 312U sierra model supposed to be compatible with SRP500s. Any other settings I should try?
Jul 13 17:59:09 SRP527W daemon.notice rc: 3G WAN is unplug
Jul 13 17:59:09 SRP527W daemon.notice rc: killall -TERM igmprt
Jul 13 17:59:10 SRP527W daemon.notice rc: igmprt -f -i br4080 -w 0 -c 5
Jul 13 17:59:12 SRP527W daemon.info 3G[354]: init 3G card phase get card info
Jul 13 17:59:13 SRP527W daemon.info 3G[354]: init 3G card phase verify pincode
[code]....
I have a Cisco 527w which we are wanting to deploy to our remote sites however i've found a bug. We use ADSL with an IPsec tunnel as primary and 3G APN for failover . When the ADSL goes down the route via the IPSec tunnel remains and i am unable to route the traffic via the APN backup without disabling the VPN tunnel .
View 0 Replies View RelatedI'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 USB dongle directly into my computer it works perfectly and I got the router to work using a Ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port
View 3 Replies View RelatedI recently changed from an SMC Barricade N to a Belkin Share N300 wireless router and my xbox 360 can no longer recognize my pc over the network. The xbox is connected to the router physically and the pc is connected wirelessly. Both the pc and the xbox can access the internet. This problem did not exist when I was using the old router. Media sharing on my pc is configured exactly as it was before I changed routers.
View 3 Replies View Relatedwindows seven changes my ip address after sitting idol for awhile. I have to reboot and reset my modum the computer is brand new
View 1 Replies View RelatedWhen setting up Belkin fF5D8235-4 v2 router it will not recognize the Speedstream 4100 modem. Is there a fix for this?
View 1 Replies View RelatedI have a Linksys WRT110 wireless router that has never given me any problem. All of the sudden, after a storm blew through yesterday, none of the laptops in my house (PC running Vista and Mac) will recognize my wireless network. I have a desktop computer and BluRay player hardwired to the router and the internet works fine on them through the router.The problem is not that I can't connect or lose connection, the wireless network isn't showing up as existing anymore, like it has disappeared.
View 3 Replies View RelatedWe have recently purchased a Cisco Small Business Pro SRP 527W router, all seems good and it is running smoothly, no disconnections or sync issues like our last router. However, after a certain amount of time the web management interface is unavailable through the browser (accessing it via 192.168.1.254 or the alternative we set-up 1.1.1.1) It is totally unavailable and timeouts in the browser yet there is still internet access and network is still alive. The web management interface was accessible before though and the only solution I have been able to do to access it again is to reboot this router.Could it be possible that because port 80 is forwarded to a different IP it interferes with the Web management interface? And how wcould the interface port access be changed?
View 2 Replies View RelatedI have just installed an SRP 527w and it's basic operation is working fine. However, the ISP has allocated (and set up routing for) a range of 16 additional static addresses to the link that I now wish to configure and use, but I am having problems. Details are as follows (ip addresses are fictitious): [code]Extra ip range Netmask: 255.255.255.240From what I understand, these are added as subinterfaces which are bridged off the main WAN interface. However, when I try to add a subinterface by specifying (say) I get an error when saving : [code] The error states "IP Address and Gateway cannot be the same as the netmask".
View 3 Replies View RelatedOne moment the laptop was using the wireless connection from the router in our house and the next it lost internet access and then wasn't able to recognize the SSID or connection at all on the available wireless connections. We have reset the router and restarted the laptop countless times yet the only internet access we have is on the computer the router is hooked up to.The wireless connection works neither on the laptop nor the Wii, both previously works merely hours ago and with no problems until now.We assume there is an issue with the router itself, whether it be a loose ethernet cord (which only faintly can be moved in its place).It's almost as if the router is stopping them (Wii, and laptop) from having access. When we explore the wireless internet properties on the laptop, it shows the wireless connection, yet only there and doesn't give access to it. Could it be the router, or could the company have restricted WiFi only to the computer it is hooked up to?
View 1 Replies View Relatedi currently use a 3g dongel to access the internet, im looking to share the signal so other user's in my household can connect to the itnernet at teh same time. I have a netgear N600 wireles dual band router, i was wondering if mabye i somehow conencted it to this?there is USB slot in the router but it doesnt seem to recognise the dongell when i plug it in there.
View 2 Replies View RelatedI'm having an irritating problem with an internet USB dongle in my new computer. I connected the dongle to a working USB port where the computer installed the drives/program that existed on the dongle. However, when I start the program it says no device found. I tried pulling out the USB and then plugging it back into the USB port whereas the computer first gives me a "pling" sound that it has detected the device and immediatly after that sad sound that says the device has been pulled out even though it's still securely in the USB slot[CODE]
View 2 Replies View RelatedI read that there is a USB 3.0 docking station with a Gigabit NIC already available, probably NOT using this, as it looks like the chip should be available in Feb 2012. Such an adapter would allow me to re-purpose my homemade NAS (with USB 3.0 expandability) to gateway / router use.
View 1 Replies View RelatedI have a 3G USB Dongle.I want to unlock it so that I can able to use on any network and any affordable data plan !!is it really works if we unlock it ?
View 5 Replies View Relatedcreate a VPN dongle for my office users. I have Cisco ASA 5005 firewall. I want to give them remote access to our intranet but if the user doesn't have the dongle which has the certificate on it he/she can not connect to my office intranet.
View 2 Replies View Relatedhow do i connect client computers to a server using a 3g gsm sim dongle for each computer and the server aswell...sounds weird but the client computers are way too far away from the server computer.
View 11 Replies View RelatedI got a Wireless Dongle to make my Windows ME PC wireless.On eBay, it said it worked on Windows ME.I installed it but cannot get a wireless signal.It does not even have a management program. So I reinstalled it and still got the same result.
View 5 Replies View RelatedI currently use a dongle to get online,and I'm thinking of changing to the free wifi that we have in our housing complex.
I'm on XP Pro SP3,and have an ethernet card fitted,and the requisite ethernet cable.
I am trying to update games and that on my Xbox 360 i do not have internet (Landline) only a Mobile Broadband Usb from "Three" i am trying to get online with it. Ive read alot of forums and watched alot of videos and cant find a answer. On most of the infomationn i found it says about Opening the Properties then clicking Sharing Tab but when i tried there was no sharing tab so i dont have a clue on what i need to do.
View 1 Replies View RelatedI have a wireless dongle which worked prior to me trying to download spy docter which i removed, now when i put my dongle in the port it says ive no connection.....
View 1 Replies View Related