Cisco Routers :: SRP 527W - Connecting Sierra 312U USB Modem To Telstra?
Jul 14, 2011
The router recognizes the Sierra 312U modem but does not connect to Telstra. The modem is on a monthly plan (not pre-paid) and I have tried APN settings such as internet.telstra and internet.bigpond. The configuration is set to manual and the correct user id and password have been entered. explain the "daemon.err rc: start -1 port.... fail (-8)" in the log? 312U sierra model supposed to be compatible with SRP500s. Any other settings I should try?
Jul 13 17:59:09 SRP527W daemon.notice rc: 3G WAN is unplug
Jul 13 17:59:09 SRP527W daemon.notice rc: killall -TERM igmprt
Jul 13 17:59:10 SRP527W daemon.notice rc: igmprt -f -i br4080 -w 0 -c 5
Jul 13 17:59:12 SRP527W daemon.info 3G[354]: init 3G card phase get card info
Jul 13 17:59:13 SRP527W daemon.info 3G[354]: init 3G card phase verify pincode
[code]....
View 7 Replies
ADVERTISEMENT
Feb 28, 2012
! have a TELSTRA ADSL wireless router ( Thomson TG782T)I need to connect my 2 printers to it so I can operate them wirelessly to my laptop and Desktop computers
Laptop: TOSHIBA Satellite w/- windows 7 Professional
Desktop: ASI Computer w/- Windows 7 Ultimate currently connected to ADSL modem by yellow network cable.
View 1 Replies
View Related
Aug 4, 2012
Digital Business and my SRP527W router has just arrived. While I wait for my digital business to be activated i've got a small Eee PC shareing its internet connection through a D-link (piece of garbage) router into my server and out to my LAN.
What I would like to do is install the USB modem into the USB slot of my Cisco Router so i can finally get my data cabinet set up.
The problem is that the Telstra modem when being installed onto a computer, it requires a PIN to activate and then you are required to 'connect' via a little user interface.
Will this be an issue? Will i be able to connect my USB modem to my router while i wait for Digital Business to get going?
View 3 Replies
View Related
Feb 23, 2013
Region : australia
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Australia
Model : TL-MR3040
Hardware Version : Not Clear
Firmware Version :
ISP :
does any one know if the new sierra 320u 4g bigpond modem will work with the tl-mr3040 battery wifi router, and does it handle the 100mbs speed, also how relyable are these routers, and what is its range.
View 3 Replies
View Related
Oct 4, 2011
We recently got the telstra tg782t wifi modem from bigpond. When we first got it, we were able to connect and use the wifi on our ipods. but recently we have been connecting to the modem but when i go on safari or app store it says that it cannot find the server.
View 3 Replies
View Related
Sep 23, 2012
A SRP 527W is responsible for the data network in my office. But I am not able to access it. I use traceroute to confirm its IP address is “10.0.0.138”. I am not able to access / open 10.0.0.138 with my web browser. I even can not access the same address with telnet. So is there any solution to access the SRP 527W?
View 10 Replies
View Related
Jul 28, 2010
I recently ( three days ago ) purchased a SRP 527w and have been using it in a mixed Mac/Windows network. The setup is currently primarily using defaults apart from enabling logging. While I was still able to access the internet with some applications, accessing web content appears to have blocked after approximately 48 hours uptime.
No web pages using port 80 were available and that included the router web interface. The router would respond to ping only.
On a different note. I have to say that I find it very strange that the supplied documentation doesn't advise setting up the router using the admin login. It was only after reading one of the comments on this site that I was alerted to this security problem. I also find it rather annoying that I appear to have to purchase additional support merely to be able to download firmware updates which are designed to give the device improved functionality.
View 51 Replies
View Related
Nov 30, 2011
I spent three days trying to get the DMZ function in my newly purchased SRP 527w Small Business Router to work at no avail.All I want is for the router to place the 192.168.1.200 IP/Machine in the DMZ.I have configured the ports in the router as TRUSTED and there are no other conflicting rules but it doesn't work still.I tried upgrading to the latest firmware "SRP520W-1.1.24" and it didn't work either.
View 11 Replies
View Related
Mar 11, 2012
Just wanting to know if there is a way to disable unused LAN interfaces of these Cisco 527W routers. Looking through the configuration interface it doesnt seem to have an option for this. Also I am having trouble logging into the router via SSH or Telent . When I put the password in it says "access denied" . But password works for the web interface..
View 5 Replies
View Related
Aug 3, 2011
Our SRP527W is working - internet on and SIP phones on but I cannot access the Web interface anymore. When I try to login from any of the machines around I get a "not responding" message.
Before I get to the stage where I have to reset the whole thing and re-do the configuration completely ? I tried powering off and powering on as well as restarting all the switches etc... but I get the same result.
View 1 Replies
View Related
May 12, 2011
at our office we've recently upgrade from a old consumer-grade linksys wag200g modem/router/ap to the Cisco SRP527w. The Cisco is suffering from very frequent ADSL disconnections. These disconnections happens when there is some traffic to the internet and they seem to don't affect the LAN routing: on the weekends there are no disconnections at all while during the working hours there may be disconnections every FEW MINUTES making this router unusable. Often these disconnections force us to do a full reboot of the router.
Firmare version is SRP520W-1.1.19, the latest. ADSL line is a 6Mbps/640kbps. Noise margin is about 11dB for downstream and 20dB for upstream.
No voice line is used and therefore they are both disabled. 2 wireless network are active. The old linksys was (and is) working correctly, no adsl disconnections at all. Never.
View 40 Replies
View Related
Sep 12, 2012
I know how to disable the DHCP on the SRP527W but i was wondering how do i configure DHCP relay to point to a network DHCP server.
View 1 Replies
View Related
Jan 14, 2013
As a raw test it is handy for us to ping externally the WAN port of the SRP 527W. How we configure the SRP 527W to allow this? FYI we have the inbulit SRP firewall enabled.
View 2 Replies
View Related
Mar 19, 2012
I have a pair of SRP-527W routers running latest firmware V 1.01.26. Everthing works fine. Except.... Have purchased a ZTE MF112 usb dongle as backup to the ADSL but router refuses to recognise it. In mobile network status shows as "Unable to Detect USB Mobile Modem".
Have tried a second dongle of the same type, cold reboot of router etc... but nothing. It is supposed to be supported in this release of firmware...?
View 6 Replies
View Related
Jan 15, 2013
we are trying to configure one to one NAT translations on a Cisco 527W-U, but are having some problems. We are running firmware version 1.2.4 (003) on the 527.
The DSL line is assigned with a /29 address range x.x.x.64 /29?
The DSL WAN interface picks up x.x.x.65 /32 from the Radius server. We are using the default private IP address range 192.168.15.0 /24 on the LAN (VLAN1), and can get to the internet ok with a PC connected to the LAN.
However when we try to set up a public IP address in the same range (eg x.x.x.66 /29) on VLAN1 (with x.x.x.67 on the PC) it will not connect. (won't allow us to configure an address from the same range as the WAN on a new VLAN interface).
we would want to be able to do one to one NAT translations eg x.x.x.66 on the outside to 192.168.15.2 inside, x.x.x.67 outside to 192.168.15.3 inside etc, but this will not either. We have tried this on a normal IOS router (887) and it worked ok. We have also tried the same on a small DSL router / modem product similar to the 527 from another manufacturer and it worked ok on that, but we wanted it to be able to work on the 527.
We have tried the NAT bypass feature without any success, reading several other discussion forums on this website leads me to believe that one to one NAT is not supported on this equipment at the moment, or at least not at the current firmware release.
One work around would be to just assign a /32 to the WAN interface on the DSL and route statically to a different routed subnet configured on the LAN, however we were wanting to avoid having to do that if possible.
View 1 Replies
View Related
Aug 9, 2011
We have a Cisco SRP 527W router that was not showing up on the LAN. so we tried a Factory Default reset but it seems to be dead.
The power light is flashing constantly,the 4 LAN light are constantly on,the DSL Data light comes on for 1 sec when device is powered up.
i have tried connecting directly to a PC, the NIC reports as network cable unplugged.i have tried the (power on device, hold down reset button, power of after 30 sec, power on after 5 sec, release reset button after 5 sec) but still "network cable unplugged".
the firmware flash utility will not find the NIC the device is connected to.the router is less than a year old, is there a fix or is it a warranty replacement ?
View 2 Replies
View Related
Jan 10, 2013
I have two wireless modem/routers - a Ugo Mach5 CN458 and a Swift 4G - in two branches of my company that are distance apart and i want to connect them together so that they can be on the same network and workers in both branches can communicate and share files.
View 2 Replies
View Related
Jul 18, 2011
I have recently acquired one of these routers. I thought, being a Cisco product, it would be the bee's knees. It is not. After finally getting the network set up - no mean feat, although I do not claim any expertise, but had to resort to some other network management software to finally get it all running - the router drops either the WAN connection or the wireless connection many times a day. The laptops often show as being connected to the network/router, but are unable to access either the internet, or the router via the browser. Re-booting the router is the fix, but, hey, I can achieve that sort of performance with any old $20 router - none of my old Net gear routers was this troublesome.
The permanent fix would seem to be a firmware upgrade, but guess what? The only options available under the "Administration" tab are time setting and switch settings - no firmware upgrade. The supplied firmware is 1.01.09(001) Apr 7 2010. Why these products are supplied, as new, without the latest firmware installed beats me, but there you go.
View 4 Replies
View Related
Apr 23, 2012
Currently I have 2 different modem running in my working area which is modem A and modem B. Whenever user from Modem A(192.168.0.1) or Modem B(192.168.0.10) would like to print or scan something using the shared printer, I need to manually plug the cable into either Modem A or Modem B depends on the network the user are currently using.How I do previously is only set DHCP on Modem A and disable DHCP for modem B so that Modem B will share DHCP assigned by Modem A. Both modems connect to the same Switch with the printer cable so both network user can use it together.But the problem now is I have to enable DHCP for both modems and causing the previously method can't be use anymore. So is there any other way that I can link both Modem A and Modem B with each assign different DHCP to link with 1
View 5 Replies
View Related
Apr 26, 2012
How to connect 2 cisco modem in 1 3com router.
View 6 Replies
View Related
Jan 24, 2013
How do I hook up a Belkin 750 Router to my modem when modem has only one plug?
View 1 Replies
View Related
Oct 9, 2012
I have a Cisco 527w which we are wanting to deploy to our remote sites however i've found a bug. We use ADSL with an IPsec tunnel as primary and 3G APN for failover . When the ADSL goes down the route via the IPSec tunnel remains and i am unable to route the traffic via the APN backup without disabling the VPN tunnel .
View 0 Replies
View Related
Feb 5, 2012
Dell dimension 2400 XP home. Connects fine to old linksys g router.With new qwest dsl modem/router get IRQL not less than or equal as soon as I click on connect .Blue screen stop and must reboot.Qwest router works fine with my lenovo lap top. Win 7.
View 3 Replies
View Related
Oct 29, 2012
I just got a DSL Modem router (DSL 2750U) which has DSL input for internetconnectivity.My internet service provider provides RJ45 Cable which needs LAN input socket on a router for internet connectivity. How do I connect?
View 4 Replies
View Related
Feb 7, 2011
I am trying to connect a Netgear wirless router to my cable modem. I have followed the instructions on the set up wizard but it fails to get a connection with the IP and DNS info I provide.I got the IP address info by connecting intially direct from the modem to the PC and then went to Run CMD and type ipconfig /all. I then started the set up wizard and followed the instructions, turning things on in specific order etc. After input the IP and DNS info it reports an error and tells me to check the address information is correct.My internet is a static IP connection (so it tells me and the IP information doesn't change).
View 3 Replies
View Related
Dec 8, 2012
I have linksys router connected to my cable modem. I want to change it Belkin AC900. How can I keep the linksys connected until I have tested set up for Belkin AC900 router.
View 2 Replies
View Related
Dec 10, 2012
I am connecting to internet via motorola modem which gives me approx 6 Mbps download speed when I test it with both speedtest.net and speakeasy.net. Any device that I use connected wirelessly to my Belkin N300 router only acheives about 1.3 MBps of download speed. Is this just the way it is or could I have a router configuration issue or something else?
View 2 Replies
View Related
Feb 6, 2013
My router is a Dlink Model DI-624
My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.
View 1 Replies
View Related
May 14, 2012
For more than 6 months I have been happily using a Sierra Wireless AirCard313U to connect my Win7 Pro (64-bit x86) laptop to the internet, and using another corporation's VPN (Citrix Access Gateway) as a contractor - so networking problems ARE my problem.
Now what happens is: DNS failures halt my internet browsing and any hope of RDP'ing into the corporate LAN whenever I connect to the VPN while using the AirCard (its a USB/cell modem device). The DNS lookups and RDP'ing works fine when I'm using the VPN with my wifi.
What changed recently:Installed Connectify software Uninstalled Connectify software (didn't work w/AirCard) Installed VirtualRouter software Uninstalled VirtualRouter software (didn't work w/AirCard) Installed Sierra Wireless' AirCard Watcher software (manager app, may have included updated drivers for the AirCard) Re-install Connectify software (now worked w/AirCard)Uninstalled Connectify software (DNS problem had appeared)
I've tried removing ISATAPs, running these commands & rebooting, to no avail:netsh int ipv4 reset reset.log netsh int ipv6 reset reset.log netsh winsock reset catalog
Right now, connected to VPN via wifi my ipconfig /all looks like this:
Windows IP Configuration
Host Name . . . . . . . . . . . . : W7
Primary Dns Suffix . . . . . . . :
[Code].....
View 3 Replies
View Related
Apr 20, 2012
I am trying to connect my Dell Dimension E310 to WiFi using my Sprint Sierra 589 USB adapter but I am not able to get through.i have installed Sprint S/w for connecting WiFi using the USB adapter. After I connect USB adapter, it shows Wireless connection icon in right bottom but when I right click to wireless network connection in Network connections - it gives me on 2 options - General & Advanced. I don't see Wireless Network tab.If connect the Sprint card to my laptop & try to connect the laptopn, it works. The internet on laptop get connected using Sprint Card instead of my laptop existing card which indicates the Sprint card is working. how to make above successful OR I need to purchanse new WiFi adapter which can connect to Dell E310 (after googling some adapters, found few WiFi adapters which work on XP)
View 4 Replies
View Related
Jan 23, 2011
I've just purchased the telstra portable wifi, and my iPod touch and phone connect to it perfectly, but my laptop won't have a bar of itIt brings up the screen to enter your WPA and that's fine, but after a while of trying to connect it just tells me that it can't connect and when I click to diagnose the problem it just tells me I can try again.I've gone into the event log, the summary is as follows:Helper Class (L2Sec helper class) event:[CODE]
View 9 Replies
View Related
Feb 11, 2013
i have a telstra 4g wireless broadband stick. I was wondering ifi bought a TP-Link TL-WR841ND 300M Wireless N Router 2 Detachable Antennas would i be able to plug the stick into my computer and plug my computer into the router and make the router emit the broadband usb sticks interet?
View 2 Replies
View Related
Mar 10, 2013
I have an acre aspire D255E and a Telstra wireless elite device. The device is connecting wirelessly but saying 'No Internet access'. How do I fix this?
View 1 Replies
View Related
