i have a telstra 4g wireless broadband stick. I was wondering ifi bought a TP-Link TL-WR841ND 300M Wireless N Router 2 Detachable Antennas would i be able to plug the stick into my computer and plug my computer into the router and make the router emit the broadband usb sticks interet?
View 2 RepliesI want to know if i can format or rerouter a Vodafone mobile broadband model: k3571-z to use as wireless reciever for a cable broadband in my house, no computer details as yet as im still in process of building one.
View 1 Replies View RelatedDigital Business and my SRP527W router has just arrived. While I wait for my digital business to be activated i've got a small Eee PC shareing its internet connection through a D-link (piece of garbage) router into my server and out to my LAN.
What I would like to do is install the USB modem into the USB slot of my Cisco Router so i can finally get my data cabinet set up.
The problem is that the Telstra modem when being installed onto a computer, it requires a PIN to activate and then you are required to 'connect' via a little user interface.
Will this be an issue? Will i be able to connect my USB modem to my router while i wait for Digital Business to get going?
I have an acre aspire D255E and a Telstra wireless elite device. The device is connecting wirelessly but saying 'No Internet access'. How do I fix this?
View 1 Replies View RelatedWe recently got the telstra tg782t wifi modem from bigpond. When we first got it, we were able to connect and use the wifi on our ipods. but recently we have been connecting to the modem but when i go on safari or app store it says that it cannot find the server.
View 3 Replies View Relatedi would like to know if i can use my 3g stick connected to a computer to use it with my router to have wirelles signal in my house.
View 1 Replies View RelatedI play a game called Unreal tournament 2k4 in online. I am from Bangladesh a small country from south asia. I used to get 150 ping in a Japanese server. But 2 weeks ago my ping suddenly rise. Now its around 268-320 in same server. But i have 160 ping in another Japanese server. So i used trace-route option from avast IS to check the route of my connection.I found out that the server i am having high ping connects through Italy then to Japanese server. But the server i have low ping goes to Singapore then to Japan.My question is can i change the route of my connection so my first server doesn't take the route of Italy?
View 1 Replies View RelatedI tried to install Vodafone K3765 USB internet stick. I installed the software which came in the flashdrive. With this software I tried to connect to internet but I got error message "The device has been disconnected or is unavailable". I checked in device manager and in two categories this device appeared. Those two categories were "Modem" and "Network Adapter". Why this device comes under two categories plus why I am getting this error message?
View 1 Replies View RelatedIs it possible to configure remote access (IPSEC client) to force all traffic through the tunnel (no split tunnel) yet still limit the internal hosts that can be accessed?
I have been asked to provide remote access (via ASA5510) with the following requirements:
- the client should have unrestricted internet access via the ASA (the source address will appear to be the outside interface of the ASA)
- the client should have access to only two internal hosts (192.168.10.10 and 192.168.44.10)
Is there a way to limit access to those two internal hosts, while still providing secured internet access? The only way I can see is to use an access list on another device (for example our core switch).
I've just purchased the telstra portable wifi, and my iPod touch and phone connect to it perfectly, but my laptop won't have a bar of itIt brings up the screen to enter your WPA and that's fine, but after a while of trying to connect it just tells me that it can't connect and when I click to diagnose the problem it just tells me I can try again.I've gone into the event log, the summary is as follows:Helper Class (L2Sec helper class) event:[CODE]
View 9 Replies View Related! have a TELSTRA ADSL wireless router ( Thomson TG782T)I need to connect my 2 printers to it so I can operate them wirelessly to my laptop and Desktop computers
Laptop: TOSHIBA Satellite w/- windows 7 Professional
Desktop: ASI Computer w/- Windows 7 Ultimate currently connected to ADSL modem by yellow network cable.
we (educational institution)are attempting to trace an ip address for a STC USB stick. Actually, we have requested STC GSM provider to trace it. Reason being is, one or more of our teachers have sent an email harassing other staff. We wish to find out if STC has the techincal know how to get this info.
View 2 Replies View RelatedThe router recognizes the Sierra 312U modem but does not connect to Telstra. The modem is on a monthly plan (not pre-paid) and I have tried APN settings such as internet.telstra and internet.bigpond. The configuration is set to manual and the correct user id and password have been entered. explain the "daemon.err rc: start -1 port.... fail (-8)" in the log? 312U sierra model supposed to be compatible with SRP500s. Any other settings I should try?
Jul 13 17:59:09 SRP527W daemon.notice rc: 3G WAN is unplug
Jul 13 17:59:09 SRP527W daemon.notice rc: killall -TERM igmprt
Jul 13 17:59:10 SRP527W daemon.notice rc: igmprt -f -i br4080 -w 0 -c 5
Jul 13 17:59:12 SRP527W daemon.info 3G[354]: init 3G card phase get card info
Jul 13 17:59:13 SRP527W daemon.info 3G[354]: init 3G card phase verify pincode
[code]....
I want to setup wireless on laptop with USB Stick connected to usb port.
View 2 Replies View RelatedI want connect an external HDD 320GB FAT32 2,5" but E4200 dont found it. USB Stick with 4GB is working.E4200 have latest Firmware.
View 1 Replies View RelatedI've been trying to re-purpose my E4200v1 as a Bridge, AP or some other thing that might work with wifi coverage in my home. I am using an Asus as the primary router. and I have Verizon Fios so I have a coax/ethernet router with its wireless switched off so that the Asus is primary. That works, but when I go to reset the E4200v1, I can get it to take a new IP address, but when I attempt to put it into bridge mode, as soon as I hit "save settings" I see the admin screen flash and it goes back to its origninal settings, instead of saving the new settings.
View 9 Replies View RelatedRunning 2k on a older Laptop, running the manufactures (Ralink RT2870 chipset) utility for a USB wireless stick causes issues so I want to try using Windows wireless utility. Problem is, I can't find how to use it. I have it running under Services. The supplied utility & drivers are installed, but I stopped loading the utility since it causes the PS2 mouse to stop responding as soon as the utility loads. The stick connects and does work, but I have no control over it without running the utility.
I tried another no name sticks software (the exact same stick, but under a different name) but it has a overly complex utility (and a newer driver), but it causes the Laptop to lock up completely.I never used a USB wireless stick before and never used wireless anything in 2k when I use to run it 6 or 7 years ago. The Laptop isn't for me.Does 2k have the ability to run a wireless device with its own utility as it does in XP, or is this because it is a USB stick, not a PCI card where the problem is?
Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.13.12
ISP : Triple C
I'm trying to set up my new WR741ND router to replace the old WR541G with excctly the same cabling,ISP account etc.
All seem to be working i.e. I get the PPPoE connection against the ISP and cat ping by name to Internet addresses from THE ROUTER.Also I get DHCP handing out addresses both to my desktop connection by Ethernet cable and to my laptop via Wifi.And the computers may ping the router and also connect its admin GUI.However,the computers stop at the router and can't go further.All they can go is to the router as if it doesn't route between LAN and WAN.With the 541 router everything works and as I said it has the same setup (very basic,no static routes or anything too smart).
I purchased a WAP4410n for our small office to provide wireless access to our internal network to laptop users. I have configured the device as simplistically as is possible, but although I can get my laptop to connect to the AP (verified by managing the device wirelessly as well as by pinging the IP address) I can not get to any other IP address on my internal network nor the internet.I gave the device a static IP address - 192.168.1.50 subnet 255.255.255.0 with a default gateway of 192.168.1.254 which is my 2811 router. I set up a WPA-secured SSID.
A second problem I have is that if I set up my laptop wireless card to get its' IP settings form a DHCP server, it picks up a 169.xx.xx.xx ip address - it is as if the AP is not passing my DHCP broadcast / response through.
I know that WRTP54G is a voip device, but it is router as well and my problem is related to routing part.I cannot access public internet servers with IP in subnet 2.0.0.0 / 8 and 1.0.0.0 / 8. In the 2.0.0.0 / 8 subnet are some akamai cdn servers (yes, the fbcdn .After some time I've found, that routing table in wrtp54g contains also entries:
1.0.0.0 0.0.0.0 255.0.0.0 LAN&Wireless2.0.0.0 0.0.0.0 255.0.0.0 LAN&Wireless
which cannot be deleted. It looks like someone wanted to filter dark space when the router was developed.Is there any way, to get rid of it? I've restored to factory defaults, no change. Firmware version is 3.1.27.ETSI
i have lenova laptop. it does not pick up internet by wireless or through wired connection though the wireless is on?
View 3 Replies View Relatedwhy my computer cannot connect to wifi but can only connect to ethernet and broadband only?
View 2 Replies View RelatedI have am unable to access the Internet via my modem and router. My computer recognized the connection from my router. My modem is a Motorola 12DVC. My router is a Linksys Broadband Wireless-B BEFW11S4 version 4. I tried several things, including changes via 192.168.1.1. I am using an AT&T DSL connection. The router has only been used one time.
Here is some other information:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsJim>ipconfig /all
[Code].....
Is it possible to use a wireless router to pick up internet signals using a cricket broadband connection
View 1 Replies View RelatedI have a linksys router connected to four computers and putting out a wireless signal. I also have a PC upstairs I would like to get online, and have a WRT54G V5 wireless router that I want to use like a wireless USB stick. Is this possible without downloading additional firmware beisdes official Linksys firmware?
View 6 Replies View RelatedI try to make Nat on a stick, but not successful.
Network Diagram
Config File
interface Loopback0ip address 10.0.1.1 255.255.255.252ip nat outsideip virtual-reassembly!!
interface FastEthernet0!!interface FastEthernet1!!interface FastEthernet2!!interface FastEthernet3!!interface FastEthernet4ip address 60.160.60.138 255.255.255.248
[Code].....
I've enabled antispoof on all interfaces on asa 5510.If you start a traceroute to a network on the default route, everything works, since replies comes to an interface with route 0.0.0.0/0 defined.If you start a tracer route to a network that is NOT on the default route (let's assume coporate MPLS), you only get response from first carrier router, the other are discarded because of anti spoof violation.
I have ICMP inspection and icmp-error inspection enabled.
I purchased a Virgin Mobile Online Stick where you do not need a telephone jack, modem, router etc. or anything to go online, It's like, go online from everywhere, like at&t offers it too. Costs like 40-50 bucks a month.But I cannot go online. i insalled the stick and when open the icon, it connects and says ready, but I cannot reach ANY site at all.I saw in the network section that there is a little red x infront of the locale area connection and it always says, connect a cable. But this should not be the cae since you do not need any kind of cables with this stick.A friend of mine and I had the same stick from at&t and it worked perfect. We just double clicked the at&t icon on the desktop, clicked connect and everythng was great and we used it to 100% in the car missing or doing wrong?PS: PC runs on Vista AND, when calling Virgin, they just tell you, that's not there problem because it shows that it is connected, which is true, but still cant reach ANY website
View 1 Replies View RelatedI have been asked to setup a VPN on a stick setup so that people on the move can use the encryption of our SSL VPN for web browsing etc using Any Connect. This works fine, whats my ip shows the external IP of the office when connected to the VPN and all traffic is pushed down the pipe. The only issue is when connected I have no access to local resources such as IP printers etc. How to do this on 5505?
View 6 Replies View RelatedHow to unlock EC156 HSIA USB stick for work with GSM SIM?
View 1 Replies View RelatedIt doesn't seem like I can set up trunking (dot1q) on this device. Isn't it supported on this device? Can I still set up VLANs with the router-on-a-stick concept working internal in the device, i.e no external interfaces/subinterfaces being configured? If so, can I then connect VLANs to other switches? I have:
-876 ISR
-Catalyst 2960
-SLM2008
I know the small biz switch supports VLANs and I think trunking as well--obviously the 2960 supports it. Is there a way with these devices to configure one VLAN for servers/net devices and another for regular end-user computers so that they still talk to one another, or do I need a different router in the mix?
My office connection have low ping to a game server that i play and i'm thinking on how to route my home internet connection to it.Home ~230msOffice ~120msThe ping from my home to the office firewall and router is pretty low since it's in the same area but going out to international connection made it jump really high when i'm at home.[CODE]
View 1 Replies View RelatedI just had to get rid of a bad DIR-825 that I replaced a trusty old DIR-655 with and now I'm back. Anyhow, I can't seem to make the DDNS setting stick in the router. All of the information is correct, but it doesn't seem to want to login. When I click the enable check box, it tries connecting and then greys out and doesn't connect.
View 3 Replies View Related