Connecting Two Wireless Modem / Routers That Are Far Apart Together

Jan 10, 2013

I have two wireless modem/routers - a Ugo Mach5 CN458 and a Swift 4G - in two branches of my company that are distance apart and i want to connect them together so that they can be on the same network and workers in both branches can communicate and share files.

View 2 Replies


ADVERTISEMENT

Routers / Switches :: Connecting A Cable Modem To Wireless Router?

Feb 7, 2011

I am trying to connect a Netgear wirless router to my cable modem. I have followed the instructions on the set up wizard but it fails to get a connection with the IP and DNS info I provide.I got the IP address info by connecting intially direct from the modem to the PC and then went to Run CMD and type ipconfig /all. I then started the set up wizard and followed the instructions, turning things on in specific order etc. After input the IP and DNS info it reports an error and tells me to check the address information is correct.My internet is a static IP connection (so it tells me and the IP information doesn't change).

View 3 Replies View Related

Belkin AC900 / Connecting Two Wireless Routers To One Cable Modem?

Dec 8, 2012

I have linksys router connected to my cable modem. I want to change it Belkin AC900. How can I keep the linksys connected until I have tested set up for Belkin AC900 router.

View 2 Replies View Related

Routers / Switches :: Connecting A Printer To Two Different Modem?

Apr 23, 2012

Currently I have 2 different modem running in my working area which is modem A and modem B. Whenever user from Modem A(192.168.0.1) or Modem B(192.168.0.10) would like to print or scan something using the shared printer, I need to manually plug the cable into either Modem A or Modem B depends on the network the user are currently using.How I do previously is only set DHCP on Modem A and disable DHCP for modem B so that Modem B will share DHCP assigned by Modem A. Both modems connect to the same Switch with the printer cable so both network user can use it together.But the problem now is I have to enable DHCP for both modems and causing the previously method can't be use anymore. So is there any other way that I can link both Modem A and Modem B with each assign different DHCP to link with 1

View 5 Replies View Related

Routers / Switches :: Connecting 2 Modem In 1 Router

Apr 26, 2012

How to connect 2 cisco modem in 1 3com router.

View 6 Replies View Related

Belkin Routers :: 750 - Connecting To One Plug Modem?

Jan 24, 2013

How do I hook up a Belkin 750 Router to my modem when modem has only one plug?

View 1 Replies View Related

Routers / Switches :: Bsod When Connecting To Qwest Dsl Wifi Modem

Feb 5, 2012

Dell dimension 2400 XP home. Connects fine to old linksys g router.With new qwest dsl modem/router get IRQL not less than or equal as soon as I click on connect .Blue screen stop and must reboot.Qwest router works fine with my lenovo lap top. Win 7.

View 3 Replies View Related

Routers / Switches :: Connecting DSL Modem Router To RJ45 Line?

Oct 29, 2012

I just got a DSL Modem router (DSL 2750U) which has DSL input for internetconnectivity.My internet service provider provides RJ45 Cable which needs LAN input socket on a router for internet connectivity. How do I connect?

View 4 Replies View Related

Belkin Routers :: N300 Connecting To Internet Via Motorola Modem

Dec 10, 2012

I am connecting to internet via motorola modem which gives me approx 6 Mbps download speed when I test it with both speedtest.net and speakeasy.net. Any device that I use connected wirelessly to my Belkin N300 router only acheives about 1.3 MBps of download speed. Is this just the way it is or could I have a router configuration issue or something else?

View 2 Replies View Related

Cisco Routers :: SRP 527W - Connecting Sierra 312U USB Modem To Telstra?

Jul 14, 2011

The router recognizes the Sierra 312U modem but does not connect to Telstra.  The modem is on a monthly plan (not pre-paid) and I have tried APN settings such as internet.telstra and internet.bigpond. The configuration is set to manual and the correct user id and password have been entered.  explain the "daemon.err rc: start -1 port.... fail (-8)" in the log? 312U sierra model  supposed to be compatible with SRP500s. Any other settings I should try?
 
Jul 13 17:59:09 SRP527W daemon.notice rc: 3G WAN is unplug
Jul 13 17:59:09 SRP527W daemon.notice rc: killall -TERM igmprt
Jul 13 17:59:10 SRP527W daemon.notice rc: igmprt -f -i br4080 -w 0 -c 5
Jul 13 17:59:12 SRP527W daemon.info 3G[354]: init 3G card phase get card info
Jul 13 17:59:13 SRP527W daemon.info 3G[354]: init 3G card phase verify pincode

[code]....

View 7 Replies View Related

Routers / Switches :: Dlink Model DI-624 / Arris TM502GI Modem Setup - Connecting Cables?

Feb 6, 2013

My router is a Dlink Model DI-624

My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.

View 1 Replies View Related

Routers / Switches :: Connect Modem To Wireless Router / Modem Combo?

Aug 23, 2011

My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.

View 1 Replies View Related

Wireless Modem Not Connecting To PC

Jul 21, 2011

I have a wireless modem. Its main connections are power, and phone line. Since its a wireless modem it is not connected to my PC through wire. i have a Data card USB which is plugged in my PC. The wireless modem senses this Data card and my internet was working normally. I live in New-Zealand and I was having a Telstra Clear connection with their modem and Data card. Since it was acquired by Telecom, the internet provider had given me this new wireless modem but the Data card remains the same.Now this new wireless modem is not connecting. But the laptops are getting connected through WiFi. Since my PC has no WiFi, it uses this data card. My PC is not getting connected to the internet. I tried plugging in the USB Data card in and out, updating the drivers and stuff.I want my PC to get connected to the internet.

View 3 Replies View Related

Connecting Wireless Modem To Router

Jul 7, 2011

I just had charter install a wireless cable modem into my house and it was put in my study. however, i would now like to get my xbox 360 running as well as the internet for my blue-ray player and tv. So i bought a wireless router.The modem from charter is called: Ubee wireless cable modem (from charter)The wireless router purchases is: Netgear N300 wireless router (wnr2000v3) I am trying to connect them wirelessly. Like I said above, my modem is in the study and the router is about 30 feet away in the living room area.

View 1 Replies View Related

Connecting Xbox 360 To Wireless Modem?

Mar 19, 2011

I am trying to connect an xbox 360 to my wireless modem.

View 2 Replies View Related

Connecting Wireless Router To Wired Modem?

Jul 26, 2012

I have a wired ADSL modem+router, and also a Linksys WRT54G2 V1 router. How do I connect them such that I get a working wifi available?

View 1 Replies View Related

Connecting Modem With Cat5 Cable To Wireless Router?

May 23, 2012

Have had ADSL installed through a router, connected the wireless router and it works fine Have since connected the original router via -120mtrs of CAT5 cable to extend to the house. Connection through LAN is fine into desktop however the minute we try to connect an additional wireless router the connection fails. We have even put the LAN from the second Wireless into the desktop and there is no connectivity.We have had a technician come to sort the problem, they advise that they have no explanation as to why the LAN works from the distance but the wireless does not. They have suggested that we need to cut the CAT5 half way and put an antenna up to connect the two routers.

View 1 Replies View Related

Dell :: Inspiron N5010 Not Connecting To New Wireless Modem

Apr 23, 2012

I have recently purchased a new HUAWEI wireless modem. This lovely little device will connect beautifully to my iPad, to all the Acer computers at work, to my Samsung mobile phone. It will not however successfuly connect wirlessly to my Dell Inspiron N5010.

I plug it in via a USB port and can connect to the internet that way. If I unplug the USB cable the computer says I am connected but when I try to access a webpage the browser says I am not connected. In the bottom right of my screen my computer says I am connected. This is most confusing and frustrating. I took the computer to work and had the IT department look at it but they had no answers for me.this same computer has recently been connecting to a different wireless modem so I am at a loss.

View 6 Replies View Related

Cisco Wireless :: Connecting 2504 To DSL / Cable Modem

May 13, 2013

Management has decided to put in a Wireless network and want to keep it sepeate from rest of the network. I have been asked to scope out DSL/Cable internet connections.
 
I am not familiar with setting up 2504 with dsl router.
 
Any basic guides for setting up 2504 with a dsl? do i need any static ip addresses for this setup or dhcp lease provided to cable modem would do?

View 3 Replies View Related

Wireless :: Connecting To Internet With Cell Modem And Print Through Router?

Jun 23, 2012

Trying to connect one computer to the internet using a USB Verizon Pantech modem and at the same time connect to printer wirelessly through a Linksys router. We are able to connect to one or the other and can print when connected to the home network or we can surf when connected to the Pantech. We can connect to both networks at the same time, but when we do we can neither print or surf.. It cannot find the printer and does not access the internet at all. Is it possible to do this without buying additional hardware

View 3 Replies View Related

When Connecting DSL Modem Into Wireless Router 2 Identical Default Connections Appear

May 17, 2011

When I connect my DSL modem to my DLINK wireless router, two identical DEFAULT connections appear in my wireless connection detection. Both will only connect locally.

View 5 Replies View Related

Linksys Wireless Router :: Connecting E2500 / Modem Combo?

Jul 19, 2012

I have a Linksys E2500 and I'm trying to connect it to my ISP provided router (Actiontec V1000H) because I wanted better range and consistent connectivity for my 6+ wireless devices.My problem is that, to make this work, I connected an Ethernet cable from the E2500's yellow internet port to one of my V1000H's LAN ports. This, however, did not give me access to the internet even though the network for my E2500 was available in the network list and selected as the default network. I then had to go the the advanced settings of the E2500, and changed the router IP address from 192.168.1.1 to 192.168.2.2. This granted me internet access.However, everyone i've talked to including coworkers and experts at dslreports said that, because of what I've done I've set up a double NAT with 2 potentially conflicting IP addresses, and down the road weird issues will arise because of it. They also suggested I connect the E2500 to a dedicated modem to avoid this problem. However, the dedicated modem I was sent was faulty and did not allow internet access even through the ethernet connection. So, until I get a new dedicated modem, I have to use the router/modem combo.What should I do? Should I set up the E2500 as just a wireless access point for my existing router/modem combo? What do I need to edit in the advanced settings?

View 6 Replies View Related

Linksys Wireless Router :: Connecting E1200 To Speedtouch 546 Modem?

Mar 6, 2012

My parents are using a speedtouch 546 modem for their wired internet connection, but they would like wireles in their home. I therefore bought them a linksys e1200, and tried to get their wireless internet working.
 
I connected the e1200 to the speedtouch via kabel, used the cisco software to install the wifi network, and so far so good. The laptop has no problem connecting to the e1200, but no internet connection, whatever I do.
 
There seems to be a signal comming into the back of the e1200, since the led on both the speedtouch and the e1200 are responding, indicating that the two are sharing some information.
 
Looking for information on the net, I came onto 3 possible solutions.
 
One is cloning the MAC adress of the to the speedtouch connected wired computer to the e1200. The second has something to do with interfering IP adress ranges. The third was uninstalling the cisco software, reconnecting and resetting the modem. Let windows find the hardware and just install the e1200 drivers.

View 2 Replies View Related

Linksys Wireless Router :: EA3500 - Creating DMZ By Connecting To Cable Modem

Feb 20, 2013

I want to create a DMZ by having a less sophisticated router connected to cable modem, which would have the webserver which contains no sensitive information, and then the EA3500 to which my laptops and desktops which contain sensitive information would connect to.  Can CCC work through that first router?

View 6 Replies View Related

Linksys Wireless Router :: Connecting A Telus Modem And Cisco E2500

Jul 18, 2012

Where I work, we have four computers connected on a network with a Telus combination router and modem (I should probably also mention that two of the computers are connected to a switch which is then connected to the Telus modem/router because that is how the previous tenants set it up) . Recently, my boss wanted to have two different wi-fis, one as a guest wireless and a password one for the employees so he bought a Cisco E2500. I set up the second router as a wireless access point, but eventually we started getting problems with IP conflicts which started messing with the work group connections.
 
How I'd go about setting up the E2500 properly so that there are no problems like I've been having (having to reset the modem/router constantly for the internet to work, computers being assigned different IP addresses and problems connecting to the server over the workgroup network).

View 1 Replies View Related

Dell :: Inspiron 15 Laptop / Printer V725w Not Connecting To Wireless Modem?

Sep 14, 2012

I have a new inspiron 15 laptop and also bought an all in one wireless printer. I have a iinet BOB lite modem. I cannot for the life of me figure out how to get the wireless printer, modem and laptop to tall to one another. Am I missing something or should it all work? The laptop has internet access. The laptop also shows the printer installed with a big green tick next to it but it says it is offline. At no point has a green light appeared on the printer to indicate any wireless connectivity to the modem.  

View 2 Replies View Related

Cisco WAN :: 2611 - Connecting Home Lab Router To Cable Modem Over Wireless Access

Mar 11, 2012

My home lab is in a different room than the cable modem.  I have a wireless N router in the room with the cable modem.  I have a wireless access point that is connected to a Cisco 2611XM routers fa0/0 interface.  The 2611 accepts the DHCP address from the wireless router.  However, I can't ping past the wireless LAN 192.168.10.0 network. I know with the wireless router it's two layers of DHCP.  Should remove  the DHCP settings from the wireless router?  The wireless router is a  TrendNet TEW-651BR.  I can ping my iphone or any device conntected to the wireless router.  And my laptop can ping default gateway of the wireless router, which I assume is the cable modem, however the 2611 cannot.  So I'm assuming that's why the hosts behind the 2611 can't get to the internet.  I followed the below instructions.   I know the instructions don't assume your using a wirelss router between 2611 and the cable modem.  But, I really don't want to run a cable to the cable modem. 

[URL]

View 5 Replies View Related

Wireless :: Connecting Two Wgr614v2 Routers Together?

Jan 29, 2012

Connecting two wrg614 routers together. Have cable one as my provider. Both are wireless routers, however I want the second router to have only 3 pc hardwired in, no wireless.

View 1 Replies View Related

Connecting 2 Wireless Routers To Same Network?

May 2, 2012

I am on the Verizon wireless router connected to my laptop and the xbox wired to laptop. I have another wireless router that i want to connect because the main router is in the basement I am on the second floor. How do I connect the xbox to the 2nd router wired?

View 1 Replies View Related

Connecting Two Wireless Routers On Different Networks?

Jun 16, 2011

i have two linksys wireless router on different networks that i want to connect. how do i go about it?

View 1 Replies View Related

Modem Is Not Connecting To Router - DNS Not Available

Aug 11, 2011

Two days ago we received our new phone land line from Mediacom. We already had internet service from them so we decided to get a phone line. When they came over two days ago, we received a new modem, RCA DHG535-2. The issue we are experiencing is that the modem is not connecting to our rt n-16 ASUS wireless router. The modem works fine without the router but we need it for school work. The troubleshooter says "DNS is not available".A few things i tried was to unplug everything and reconnect them back from the modem to the computer.It usually works when i had trouble in the past but it seems nothing is working.

View 4 Replies View Related

Connecting 2 Laptops To One Modem?

Jan 19, 2011

i have 2 laptops and would like to connect them to one cable modem. 1 laptop is connected to the modem by ethernet cable..how can i connect the other laptop sharing the same modem?

View 3 Replies View Related

WRTU54G-TM And E1200 - Connecting Two Wireless Routers

Aug 21, 2012

We have a Linksys WRTU54G-TM that serves both as a hotspot and phone line (T-Mobile). But since it's a G, the radius doesn't cover the whole house. So instead of buying an antenna, we bought another router (Cisco Factory Refurbished Linksys E1200 Advanced Wireless-N).

So the question is: How do we connect both routers to one modem properly, the N-Wireless to be used when necessary?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved