Wireless Modem Not Connecting To PC
Jul 21, 2011
I have a wireless modem. Its main connections are power, and phone line. Since its a wireless modem it is not connected to my PC through wire. i have a Data card USB which is plugged in my PC. The wireless modem senses this Data card and my internet was working normally. I live in New-Zealand and I was having a Telstra Clear connection with their modem and Data card. Since it was acquired by Telecom, the internet provider had given me this new wireless modem but the Data card remains the same.Now this new wireless modem is not connecting. But the laptops are getting connected through WiFi. Since my PC has no WiFi, it uses this data card. My PC is not getting connected to the internet. I tried plugging in the USB Data card in and out, updating the drivers and stuff.I want my PC to get connected to the internet.
View 3 Replies
ADVERTISEMENT
Jul 7, 2011
I just had charter install a wireless cable modem into my house and it was put in my study. however, i would now like to get my xbox 360 running as well as the internet for my blue-ray player and tv. So i bought a wireless router.The modem from charter is called: Ubee wireless cable modem (from charter)The wireless router purchases is: Netgear N300 wireless router (wnr2000v3) I am trying to connect them wirelessly. Like I said above, my modem is in the study and the router is about 30 feet away in the living room area.
View 1 Replies
View Related
Jan 10, 2013
I have two wireless modem/routers - a Ugo Mach5 CN458 and a Swift 4G - in two branches of my company that are distance apart and i want to connect them together so that they can be on the same network and workers in both branches can communicate and share files.
View 2 Replies
View Related
Mar 19, 2011
I am trying to connect an xbox 360 to my wireless modem.
View 2 Replies
View Related
Jul 26, 2012
I have a wired ADSL modem+router, and also a Linksys WRT54G2 V1 router. How do I connect them such that I get a working wifi available?
View 1 Replies
View Related
May 23, 2012
Have had ADSL installed through a router, connected the wireless router and it works fine Have since connected the original router via -120mtrs of CAT5 cable to extend to the house. Connection through LAN is fine into desktop however the minute we try to connect an additional wireless router the connection fails. We have even put the LAN from the second Wireless into the desktop and there is no connectivity.We have had a technician come to sort the problem, they advise that they have no explanation as to why the LAN works from the distance but the wireless does not. They have suggested that we need to cut the CAT5 half way and put an antenna up to connect the two routers.
View 1 Replies
View Related
Apr 23, 2012
I have recently purchased a new HUAWEI wireless modem. This lovely little device will connect beautifully to my iPad, to all the Acer computers at work, to my Samsung mobile phone. It will not however successfuly connect wirlessly to my Dell Inspiron N5010.
I plug it in via a USB port and can connect to the internet that way. If I unplug the USB cable the computer says I am connected but when I try to access a webpage the browser says I am not connected. In the bottom right of my screen my computer says I am connected. This is most confusing and frustrating. I took the computer to work and had the IT department look at it but they had no answers for me.this same computer has recently been connecting to a different wireless modem so I am at a loss.
View 6 Replies
View Related
May 13, 2013
Management has decided to put in a Wireless network and want to keep it sepeate from rest of the network. I have been asked to scope out DSL/Cable internet connections.
I am not familiar with setting up 2504 with dsl router.
Any basic guides for setting up 2504 with a dsl? do i need any static ip addresses for this setup or dhcp lease provided to cable modem would do?
View 3 Replies
View Related
Jun 23, 2012
Trying to connect one computer to the internet using a USB Verizon Pantech modem and at the same time connect to printer wirelessly through a Linksys router. We are able to connect to one or the other and can print when connected to the home network or we can surf when connected to the Pantech. We can connect to both networks at the same time, but when we do we can neither print or surf.. It cannot find the printer and does not access the internet at all. Is it possible to do this without buying additional hardware
View 3 Replies
View Related
Feb 7, 2011
I am trying to connect a Netgear wirless router to my cable modem. I have followed the instructions on the set up wizard but it fails to get a connection with the IP and DNS info I provide.I got the IP address info by connecting intially direct from the modem to the PC and then went to Run CMD and type ipconfig /all. I then started the set up wizard and followed the instructions, turning things on in specific order etc. After input the IP and DNS info it reports an error and tells me to check the address information is correct.My internet is a static IP connection (so it tells me and the IP information doesn't change).
View 3 Replies
View Related
May 17, 2011
When I connect my DSL modem to my DLINK wireless router, two identical DEFAULT connections appear in my wireless connection detection. Both will only connect locally.
View 5 Replies
View Related
Dec 8, 2012
I have linksys router connected to my cable modem. I want to change it Belkin AC900. How can I keep the linksys connected until I have tested set up for Belkin AC900 router.
View 2 Replies
View Related
Jul 19, 2012
I have a Linksys E2500 and I'm trying to connect it to my ISP provided router (Actiontec V1000H) because I wanted better range and consistent connectivity for my 6+ wireless devices.My problem is that, to make this work, I connected an Ethernet cable from the E2500's yellow internet port to one of my V1000H's LAN ports. This, however, did not give me access to the internet even though the network for my E2500 was available in the network list and selected as the default network. I then had to go the the advanced settings of the E2500, and changed the router IP address from 192.168.1.1 to 192.168.2.2. This granted me internet access.However, everyone i've talked to including coworkers and experts at dslreports said that, because of what I've done I've set up a double NAT with 2 potentially conflicting IP addresses, and down the road weird issues will arise because of it. They also suggested I connect the E2500 to a dedicated modem to avoid this problem. However, the dedicated modem I was sent was faulty and did not allow internet access even through the ethernet connection. So, until I get a new dedicated modem, I have to use the router/modem combo.What should I do? Should I set up the E2500 as just a wireless access point for my existing router/modem combo? What do I need to edit in the advanced settings?
View 6 Replies
View Related
Mar 6, 2012
My parents are using a speedtouch 546 modem for their wired internet connection, but they would like wireles in their home. I therefore bought them a linksys e1200, and tried to get their wireless internet working.
I connected the e1200 to the speedtouch via kabel, used the cisco software to install the wifi network, and so far so good. The laptop has no problem connecting to the e1200, but no internet connection, whatever I do.
There seems to be a signal comming into the back of the e1200, since the led on both the speedtouch and the e1200 are responding, indicating that the two are sharing some information.
Looking for information on the net, I came onto 3 possible solutions.
One is cloning the MAC adress of the to the speedtouch connected wired computer to the e1200. The second has something to do with interfering IP adress ranges. The third was uninstalling the cisco software, reconnecting and resetting the modem. Let windows find the hardware and just install the e1200 drivers.
View 2 Replies
View Related
Feb 20, 2013
I want to create a DMZ by having a less sophisticated router connected to cable modem, which would have the webserver which contains no sensitive information, and then the EA3500 to which my laptops and desktops which contain sensitive information would connect to. Can CCC work through that first router?
View 6 Replies
View Related
Jul 18, 2012
Where I work, we have four computers connected on a network with a Telus combination router and modem (I should probably also mention that two of the computers are connected to a switch which is then connected to the Telus modem/router because that is how the previous tenants set it up) . Recently, my boss wanted to have two different wi-fis, one as a guest wireless and a password one for the employees so he bought a Cisco E2500. I set up the second router as a wireless access point, but eventually we started getting problems with IP conflicts which started messing with the work group connections.
How I'd go about setting up the E2500 properly so that there are no problems like I've been having (having to reset the modem/router constantly for the internet to work, computers being assigned different IP addresses and problems connecting to the server over the workgroup network).
View 1 Replies
View Related
Sep 14, 2012
I have a new inspiron 15 laptop and also bought an all in one wireless printer. I have a iinet BOB lite modem. I cannot for the life of me figure out how to get the wireless printer, modem and laptop to tall to one another. Am I missing something or should it all work? The laptop has internet access. The laptop also shows the printer installed with a big green tick next to it but it says it is offline. At no point has a green light appeared on the printer to indicate any wireless connectivity to the modem.
View 2 Replies
View Related
Mar 11, 2012
My home lab is in a different room than the cable modem. I have a wireless N router in the room with the cable modem. I have a wireless access point that is connected to a Cisco 2611XM routers fa0/0 interface. The 2611 accepts the DHCP address from the wireless router. However, I can't ping past the wireless LAN 192.168.10.0 network. I know with the wireless router it's two layers of DHCP. Should remove the DHCP settings from the wireless router? The wireless router is a TrendNet TEW-651BR. I can ping my iphone or any device conntected to the wireless router. And my laptop can ping default gateway of the wireless router, which I assume is the cable modem, however the 2611 cannot. So I'm assuming that's why the hosts behind the 2611 can't get to the internet. I followed the below instructions. I know the instructions don't assume your using a wirelss router between 2611 and the cable modem. But, I really don't want to run a cable to the cable modem.
[URL]
View 5 Replies
View Related
Aug 11, 2011
Two days ago we received our new phone land line from Mediacom. We already had internet service from them so we decided to get a phone line. When they came over two days ago, we received a new modem, RCA DHG535-2. The issue we are experiencing is that the modem is not connecting to our rt n-16 ASUS wireless router. The modem works fine without the router but we need it for school work. The troubleshooter says "DNS is not available".A few things i tried was to unplug everything and reconnect them back from the modem to the computer.It usually works when i had trouble in the past but it seems nothing is working.
View 4 Replies
View Related
Jan 19, 2011
i have 2 laptops and would like to connect them to one cable modem. 1 laptop is connected to the modem by ethernet cable..how can i connect the other laptop sharing the same modem?
View 3 Replies
View Related
Aug 23, 2011
I HAVE AN I BALL BATON iB lr6111a and i need to connect the same to a router but it has only one rj45 port since the router dont have a modem how can i connect it to a modem with only one port.
View 1 Replies
View Related
Feb 21, 2011
our client are using PSTN (modem) and is dialing up to our ftp box which is using ISDN (TA). according to them, they not facing any problem to dial up to other vendor which is using the same network infra (PSTN to ISDN). but, unfortunately in wont happen in my case which they (client) keep receiving the busy tone when they dialing to our ISDN no. i've set in our TA to accept both digital and analog calls and i'm using the DSS1 protocol which been told by our line provider.
View 2 Replies
View Related
Oct 25, 2012
The network card in my PC supports 1Gbit ethernet, my 2TB NAS also supports 1Gbit ethernet, however both of these are currently run through a 100Mbit cable modem/router thus reducing the connection speed. I was wondering if I purchased a 1Gbit switch and connected all my devices directly into that, then connected it into the cable modem, would the PC communicate with the NAS directly via the switch or would it go through the cable modem?
View 8 Replies
View Related
Jun 13, 2011
My aunt's connection was working fine until the other night. Apparently a storm we had knocked out their power and the next day they could not get on the internet. They were on the phone with tech support from their service provider and "had them reset the modem." This is basically all I could get as they are not very tech oriented.
From what I gathered: The modem and the router are not communicating with each other. The modem is a Motorola ADSL single port Ethernet modem, and the router is a Netgear Rangemax wireless router WPN824 v3 with the modem connected via the uplink port on the router. Whenever the ethernet cable to the PC is plugged directly into the modem, there is a connection. I exhausted my entire networking knowledge trying to figure out what could be causing this.
View 3 Replies
View Related
Jan 31, 2013
that possible to connect one telephone line with two modem (both are wireles)if possible then how?
View 1 Replies
View Related
Oct 1, 2011
I have a Windows 7 computer with Comcast HSI. It's a very fast computer, but the modem was really outdated. So was the router. So, we got a brand new Cisco N+ Router and a Motorola SURFboard SB6121 modem with DOCSIS 3.0 and IPv6. However, when plugged in, the new modem will not consistenly connect to the internet. We called Comcast and they tried to send an activation code to the modem with it connected to the computer directly, but it was intermittently going online, then offline, then back online, then offline. We exchanged the modem for an identical one, but it's doing the same thing, so the modem can't be at fault here. Comcast tried to tell us that something was wrong with our coaxial cable, but our old modem - a Motorola SURFboard 4100 running DOCSIS 1.1 - was working just fine with the same cable. Another technological "improvement" has failed me.
View 7 Replies
View Related
Apr 23, 2012
Currently I have 2 different modem running in my working area which is modem A and modem B. Whenever user from Modem A(192.168.0.1) or Modem B(192.168.0.10) would like to print or scan something using the shared printer, I need to manually plug the cable into either Modem A or Modem B depends on the network the user are currently using.How I do previously is only set DHCP on Modem A and disable DHCP for modem B so that Modem B will share DHCP assigned by Modem A. Both modems connect to the same Switch with the printer cable so both network user can use it together.But the problem now is I have to enable DHCP for both modems and causing the previously method can't be use anymore. So is there any other way that I can link both Modem A and Modem B with each assign different DHCP to link with 1
View 5 Replies
View Related
Jul 26, 2011
Ambit U10C018 send light not working. All other lights indicate proper functions. Usb not in use or connected. Enet, power, ready, receiving and sync all appear to be working properly. Have rebooted both modem and computer countless times, replaced Ethernet card (DFE-530TX+(Rev f), checked cables, all appear normal. Suddenlink service, cable guy didn't locate problem (didn't try very hard either).
View 1 Replies
View Related
Apr 26, 2012
How to connect 2 cisco modem in 1 3com router.
View 6 Replies
View Related
Feb 8, 2011
What I learned was it was bad to connect directly to the modem because you are left open to the internet. Currently my friend just got the internet and I told them to buy a router but they did not, and just have it directly connected to the modem. Is this fine, because they only have one computer, and it works fine for now, but wouldn't this be prone for attack?
View 3 Replies
View Related
Feb 15, 2011
I've been trying to connect my laptop directly to my Arris modem with an ethernet cable to get on the internet, but for some reason every time I do I have "limited access" and can't get on the internet. I can only seem to get my laptop on the internet while the wireless router is connected to the modem and then either connecting wirelessly or by connecting my laptop to the wireless router with an ethernet cable.I want to connect to the internet without my wireless router, because someone was hacking our router and was apparently doing illegal downloads. We got a cease and desist letter that said our internet will be terminated if it happens again, so I want to connect to the internet without any wireless connections being set up.
View 3 Replies
View Related
Nov 22, 2012
I have a problem connecting wifi router(airlive wt-2000r) to my ADSL modem(webstar epc2203ed2.0) using utp patch cable. When my PC is connected straight to the ADSL modem everything works like charm. But when I connect modem with wan port on the router and router with my PC I get no internet access. The network shows as unidentified network and win7 troubleshooter says: Default gateway not available. Connecting them two devices seems pretty simple and I dont think I am doing anything wrong so what could be the problem?
View 1 Replies
View Related
Nov 6, 2012
I am trying to connect my modem with router (ASUS WL-500gP V2) but don't have any luck. Internet is not working with router.
View 9 Replies
View Related
