Linksys Wireless Router :: Connecting E1200 To Speedtouch 546 Modem?

Mar 6, 2012

My parents are using a speedtouch 546 modem for their wired internet connection, but they would like wireles in their home. I therefore bought them a linksys e1200, and tried to get their wireless internet working.
 
I connected the e1200 to the speedtouch via kabel, used the cisco software to install the wifi network, and so far so good. The laptop has no problem connecting to the e1200, but no internet connection, whatever I do.
 
There seems to be a signal comming into the back of the e1200, since the led on both the speedtouch and the e1200 are responding, indicating that the two are sharing some information.
 
Looking for information on the net, I came onto 3 possible solutions.
 
One is cloning the MAC adress of the to the speedtouch connected wired computer to the e1200. The second has something to do with interfering IP adress ranges. The third was uninstalling the cisco software, reconnecting and resetting the modem. Let windows find the hardware and just install the e1200 drivers.

View 2 Replies


ADVERTISEMENT

Connecting A Thomson Speedtouch Wireless Router To A PS3?

Apr 24, 2011

I currently have a Thomson speedtouch router that i have yet to connect to my pc as i am waiting for the adaptor for it.I use AOL adsl line aol have goiven me instructions to connect the router to my PS3 either wireless or ethernet cable.I go through all the instructins but when i finally check connection it finds ip address but the internet connection has failed ie timed out 80028E02?

View 1 Replies View Related

Connecting A Thomson Speedtouch ST585 Router To A Network (dd-wrt)?

Jul 14, 2012

I have a thomson speedtouch ST585 router hooked up to my DSL line. I am trying to replace the wifi AP of the thomson with my linksys router (running dd-wrt). So far I have connected the linksys router (from the internet port) to the thomson router, and turned the thomson's wifi off. But, now I can't connect to the internet though the linksys router...I have tried disabling DHCP with no success?

Update:I can now connect to the internet through the linksys router, the problem now is that I cannot access the linksys's routers setup page. I can access the speedtouch's though.[URL] I would like to be able to manage all the forwarding (and the ip's) though the linksys router NOT the thomson (I want to make the linksys router the core router). I just need the thomson for my DSL line, I don't want it to do anything else but provide internet to the linksys router.

View 7 Replies View Related

Replace Speedtouch 330 Modem With Netgear Router Dgnd3700?

Dec 16, 2012

install a new N600 Wireless Dual Band Gigabit ADSL2+ Modem Router - Model DGND3700, to replace a Thompson Speedtouch USB Modem.

PC Windows XP Home Premium Media addition - Main PC X2 Laptops Win7 & Vista - fully working on wireless no issues.

I have managed to get two laptops working wirelessly with no problems, my main problem is the master pc needs to be able to use this router as well, but I cannot get it to work via the Ethernet cable!! I can get to to the Routers config page, I have done the following:

unplugged and removed the speedtouch modem, the old dial up connection is still available on the pc along with the speedtouch software and driver, I left this in place just in case the pc needs to revert back to the speedtouch modem, if I am unable to resolve this issue.

I have set the ip address on the PC to static and input the relavent Subnet and Gateway I can ping the Routers address 192.168.0.1 even though I have reserved the PC's Mac address and IP Adress I am unable to get to the internet. I have tried setting up a new internet connection via windows wizard.

when i look into the nework connections section in windows the local area connection is 100mb and there seems to be another connection which looks like another internet connection this indicates I am connected however I still cannot get an actual google session running.

View 1 Replies View Related

Linksys Wireless Router :: E1200 - Connecting Dlink DIP-714P+

Aug 31, 2012

I am replacing old D-Link DI-714P+ router with E1200.The old configuration was a printer connecting to D-Link router, and allow for wireless printing. Therefore, may I know how do I configure E1200 so that I still can print wirelessly, while connected to E1200 network.Assuming the printer still connected to Dlink router, can we print to E1200 then bridge to Dlink ?

View 2 Replies View Related

Linksys Wireless Router :: E1200 Causing Modem To Reset?

Nov 28, 2011

I set up an E1200 about two weeks ago to replace our old DI-524 because our net speeds were getting throttled (the old router wouldn't support anything higher than 10mbps). The same day, we started getting modem resets (We have an SB6120). This never happened on the old router but it's constantly happening with this new one. It'll happen multiple times a day. I called Cox Tech Support and they pushed an upgrade onto the modem but it still reset. I don't think it's the router, since I don't understand why it would force the modem to reset, but this never happened before I installed it. The firmware is updated to the latest version on the Cisco site (1.0.02).

View 5 Replies View Related

Speedtouch Modem Doesn't Provide Gateway Address To Router

Apr 4, 2012

My Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.

View 2 Replies View Related

Bridging Thomson Speedtouch To Belkin N Series Modem Router?

Nov 8, 2011

Five months ago we moved into a new apartment, and connected up our broadband; the ISP provides a Thomson Speedtouch modem (ST546 v6), which I understand from Tech Support is running software v4 (it was issued with V5, but rolled back to V4 for stability issues).We prefer a WiFi network, so purchased a Belkin N Wireless Modem Router (F5D8636-4 v2); I connected it up ditching the ISP issued modem, and all worked well for four months. Suddenly it refused to see the ADSL connection - orange light flashing.So after four nights of 'fault resolution' with Belkin, they decided to send me a replacement... which I finally received last night. It didn't work - same problem, flashing orange light.I have the correct user name and password for the ISP - checked it not once, not twice, but four times. The Thomson Speedtouch works, but doesn't provide a WiFi environment. Can I connect the Belkin modem router into the back of the Thomson and transmitt/carry the WiFi signal that way, and if so, how? I tried (the obvious to me) plug a ethernet cable from the Thomson modem into the Belkin, but nothing.. I'm guessing there are a few important steps I missed.

View 3 Replies View Related

Linksys Wireless Router :: E1200 Not Working After Verizon Modem Change?

Jun 24, 2012

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.

View 1 Replies View Related

Linksys Wireless Router :: E1200 Can't Acquire IP Address From Cable Modem

Apr 9, 2013

Reset to factory defaults. DHCP turned on. Status page shows black for router IP, gateway, and DNS addresses. Powered router+cable modem on/off multiple times already. I also have another wifi router (WRT120N) and it works fine.
 
Pretty simple connection. Just a ethernet cable between the cable modem and E1200 internet port (Cable modem <---> E1200)

View 2 Replies View Related

Linksys Wireless Router :: E1200 No Longer Working After Verizon Modem

Jun 24, 2012

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
 
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
 
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem?

View 2 Replies View Related

Linksys Wireless Router :: E1200 Versus Motorola 2210-02 DSL Modem?

Jan 7, 2012

My son tried to "speed up" our connection by unplugging modem&router. now can't get both talking to each other. Tried numerous steps! Bought Router 8/11/11, so NO Support from Cisco(only 90 days-POOR!). Website useless. Modem works fine with PC wired in.

View 3 Replies View Related

Linksys Wireless Router :: E1200 - Cascading From A Modem / Router?

Jun 27, 2012

I have a wireless modem/router combo right now provided to me by Centrylink, its the Q1000. I am trying to hook up a 2nd router to our network to extend range and allow extra ethernet connections points. The new (2nd) Router is a  Linksys E1200. I have been told by multiple sources it should be possible to hook the Linksy's router to the modem/router, but I am still not sure how to. All of the directions I have read involve disconnecting the old router (in my case, the Q1000) and then connecting the new router (E1200) in order to configure it. But I am not sure how to do this with out the internet access provided by the old router. how to cascade like this while using a modem/router

View 6 Replies View Related

Linksys Wireless Router :: E1200 / Make Laptop Wireless Without Connecting To All Wires?

Aug 25, 2011

How do i make my laptop wireless without having to have my laptop connect to all the wires?

View 9 Replies View Related

Linksys E1200 Computer Not Connecting Hardwired Through Router

Feb 19, 2012

I recently purchased a Linksys E1200 router. I have two desktops (Windows XP) hardwired into the router, one of which is not connecting at all.I have talked to Linksys tech support 3 times already and they have not been able to fix the problem. Pinging a website got a request timeout.Pinging the router got a good response.It was properly assigned an IP address, but did not connect through the router.Under Network Connections, it displays as "Connected" but is still not able to access the Internet.

View 2 Replies View Related

Linksys E1200 Router Will Not Connect Online With 7500 Modem

Oct 24, 2011

Internet went out for 3 days straight and calling frontier about 20 times they finally gave us a new model 7500 modem to replace the previous. The linksys e1200 router which had worked perfectly fine before the new modem has decided to not allow me to connect online. Sometimes it says im connected to internet but web browser does not connect, sometimes it says no internet access. I have no idea what i am doing so im not sure if it is a modem or router issue. I have done full reboots of both and powered on correctly. plugging in the modem into ports 1-3 do not light up the modems ports lights, only port 4 seems to light up when plugged in however computers light up all the ports when hard wired to E1 - E4.i also downloaded the latest firmware update for the linksys e1200 router.All fire walls are shut off and no WEP ( we live in middle of nowhere so a key is not needed )

View 7 Replies View Related

Linksys Wireless Router :: Connecting E2500 / Modem Combo?

Jul 19, 2012

I have a Linksys E2500 and I'm trying to connect it to my ISP provided router (Actiontec V1000H) because I wanted better range and consistent connectivity for my 6+ wireless devices.My problem is that, to make this work, I connected an Ethernet cable from the E2500's yellow internet port to one of my V1000H's LAN ports. This, however, did not give me access to the internet even though the network for my E2500 was available in the network list and selected as the default network. I then had to go the the advanced settings of the E2500, and changed the router IP address from 192.168.1.1 to 192.168.2.2. This granted me internet access.However, everyone i've talked to including coworkers and experts at dslreports said that, because of what I've done I've set up a double NAT with 2 potentially conflicting IP addresses, and down the road weird issues will arise because of it. They also suggested I connect the E2500 to a dedicated modem to avoid this problem. However, the dedicated modem I was sent was faulty and did not allow internet access even through the ethernet connection. So, until I get a new dedicated modem, I have to use the router/modem combo.What should I do? Should I set up the E2500 as just a wireless access point for my existing router/modem combo? What do I need to edit in the advanced settings?

View 6 Replies View Related

Linksys Wireless Router :: EA3500 - Creating DMZ By Connecting To Cable Modem

Feb 20, 2013

I want to create a DMZ by having a less sophisticated router connected to cable modem, which would have the webserver which contains no sensitive information, and then the EA3500 to which my laptops and desktops which contain sensitive information would connect to.  Can CCC work through that first router?

View 6 Replies View Related

Linksys Wireless Router :: Connecting A Telus Modem And Cisco E2500

Jul 18, 2012

Where I work, we have four computers connected on a network with a Telus combination router and modem (I should probably also mention that two of the computers are connected to a switch which is then connected to the Telus modem/router because that is how the previous tenants set it up) . Recently, my boss wanted to have two different wi-fis, one as a guest wireless and a password one for the employees so he bought a Cisco E2500. I set up the second router as a wireless access point, but eventually we started getting problems with IP conflicts which started messing with the work group connections.
 
How I'd go about setting up the E2500 properly so that there are no problems like I've been having (having to reset the modem/router constantly for the internet to work, computers being assigned different IP addresses and problems connecting to the server over the workgroup network).

View 1 Replies View Related

Linksys Wired Router :: Thomson SpeedTouch Chained To Cisco 861

Oct 11, 2011

I'm trying to create a VPN through a Cisco 861 but the problem is that the ISP forces me to use a SpeedTouch gateway ( as they use the MAC address for the authentication).By now, i'm getting OK pinging from client to 192.168.254.1, but I can't reach Internet.If I connect the client directly to the Speedtouch internet works properly. [code]

View 1 Replies View Related

Modem To Gigabit Switch To E1200 Wireless Router For DHCP?

Oct 4, 2012

The first part, is this even possible? Modem to switch.

Second part, e1200 router plugged into switch, handles DHCP for the switch.

Plug gigabit computers into the switch, non gigabit/wireless devices into the e1200 router.

If e1200 can't handle DHCP for the switch, could I configure a DHCP linux server directly to the switch?

I don't want to limit my network to my e1200 speeds when I have a gigabit capable modem and a gigabit capable switch.

View 1 Replies View Related

Linksys Cable / DSL :: Hookup ATT DSL Modem With E1200?

Apr 22, 2013

I presently have ATT DSL Motorola modem (Model 2210-02-1022) with (1) DSL Green plug, and (2) Ethernet-Yellow in the back of my modem.I have reset the E1200 Router, and tried multiple ways of getting the Wi-Fi to work.  This Linksys E1200 belonged to my neighbor, but he recently passed away, and left me all his computer devices.In the Wall phone jack, I have a DSL noise filter as part as a two female plug,

1) for the Green DSL on Modem, and the other

2) to my phone handset. The way I usually plug this in BEFORE this router was this: The green DSL plug from Modem - into phone jack DSL Filter, and the Yellow ETHERNET cord from Router to the back of Computer. I powered on computer, plugged in all cords, except for E1200 power cord, disabled antivirus/security software,  I then inserted the Cisco Connect CD and waited , and waited, but it said I was not connected to the Internet.  ERROR CODE# 82BD0304. I'm using win7 64 Pro.  before i called ATT, I wanted to know if there is an easier way to conect the right cords to the right plugs.

View 1 Replies View Related

Connecting Via RDP Through DSL Modem / Router -> Linksys -> Computer?

Feb 5, 2013

I'm sure that the modem/router is bridged which I think it means that it is sent to pass through the port number requests. What I did was go into my Linksys router, setup the port I want to forward to my 3389 (RDP port on the specific machine). Let's say port 45000. In the past, before Windstream took over and I had DSL with a local Telco, I would just enter my IP address and port number and I was in to the machine. Example: 171.234.54.191:45000 That would be the IP address of my modem (which just passed though the requests) to the router. Now when I do the same thing I just get an error message that looks like this: It seems that the modem/router is not passing though the request to the router. This is why I didn't want their new router/modem which the HAVE to charge $120 for worse quality machine than what I already had.

View 2 Replies View Related

Slow Download Speeds With Linksys E1200 Modem?

Apr 29, 2013

I have a Linksys E1200 modem and I am only getting less than 1.0 mbps download speeds. When connected via ethernet cable to the router, my download speed is > 50 mbps.

View 2 Replies View Related

Cisco E1200 Router - Blackberry Not Connecting With Guest Account

Dec 27, 2011

My friend was able to access my internet connection via my guest account WITHOUT having to enter the guest password. He was able to connect using a samsung galaxy phone with the android OS. However, when I connected to my guest account using my blackberry, I WAS asked for the guest account password.

View 3 Replies View Related

WRTU54G-TM And E1200 - Connecting Two Wireless Routers

Aug 21, 2012

We have a Linksys WRTU54G-TM that serves both as a hotspot and phone line (T-Mobile). But since it's a G, the radius doesn't cover the whole house. So instead of buying an antenna, we bought another router (Cisco Factory Refurbished Linksys E1200 Advanced Wireless-N).

So the question is: How do we connect both routers to one modem properly, the N-Wireless to be used when necessary?

View 6 Replies View Related

Connecting Wireless Modem To Router

Jul 7, 2011

I just had charter install a wireless cable modem into my house and it was put in my study. however, i would now like to get my xbox 360 running as well as the internet for my blue-ray player and tv. So i bought a wireless router.The modem from charter is called: Ubee wireless cable modem (from charter)The wireless router purchases is: Netgear N300 wireless router (wnr2000v3) I am trying to connect them wirelessly. Like I said above, my modem is in the study and the router is about 30 feet away in the living room area.

View 1 Replies View Related

Connecting Wireless Router To Wired Modem?

Jul 26, 2012

I have a wired ADSL modem+router, and also a Linksys WRT54G2 V1 router. How do I connect them such that I get a working wifi available?

View 1 Replies View Related

Connecting Modem With Cat5 Cable To Wireless Router?

May 23, 2012

Have had ADSL installed through a router, connected the wireless router and it works fine Have since connected the original router via -120mtrs of CAT5 cable to extend to the house. Connection through LAN is fine into desktop however the minute we try to connect an additional wireless router the connection fails. We have even put the LAN from the second Wireless into the desktop and there is no connectivity.We have had a technician come to sort the problem, they advise that they have no explanation as to why the LAN works from the distance but the wireless does not. They have suggested that we need to cut the CAT5 half way and put an antenna up to connect the two routers.

View 1 Replies View Related

Wireless :: Connecting To Internet With Cell Modem And Print Through Router?

Jun 23, 2012

Trying to connect one computer to the internet using a USB Verizon Pantech modem and at the same time connect to printer wirelessly through a Linksys router. We are able to connect to one or the other and can print when connected to the home network or we can surf when connected to the Pantech. We can connect to both networks at the same time, but when we do we can neither print or surf.. It cannot find the printer and does not access the internet at all. Is it possible to do this without buying additional hardware

View 3 Replies View Related

Routers / Switches :: Connecting A Cable Modem To Wireless Router?

Feb 7, 2011

I am trying to connect a Netgear wirless router to my cable modem. I have followed the instructions on the set up wizard but it fails to get a connection with the IP and DNS info I provide.I got the IP address info by connecting intially direct from the modem to the PC and then went to Run CMD and type ipconfig /all. I then started the set up wizard and followed the instructions, turning things on in specific order etc. After input the IP and DNS info it reports an error and tells me to check the address information is correct.My internet is a static IP connection (so it tells me and the IP information doesn't change).

View 3 Replies View Related

When Connecting DSL Modem Into Wireless Router 2 Identical Default Connections Appear

May 17, 2011

When I connect my DSL modem to my DLINK wireless router, two identical DEFAULT connections appear in my wireless connection detection. Both will only connect locally.

View 5 Replies View Related

Linksys Wireless Router :: How To Get Best Speeds Possible For E1200

Dec 22, 2012

I have 3 Wireless Devices connected to my Router which is a Ipad, Ipod Touch & laptop.I have 2 hard Wired conneted to my Router which is a ps3 and a Desktop. How can i have great speeds and reliable connection on all of them. 

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved